From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933499AbdCUQvO (ORCPT ); Tue, 21 Mar 2017 12:51:14 -0400 Received: from us01smtprelay-2.synopsys.com ([198.182.60.111]:52936 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933220AbdCUQuQ (ORCPT ); Tue, 21 Mar 2017 12:50:16 -0400 Subject: Re: [PATCH 3/3] net: stmmac: Use AVB mode by default To: Thierry Reding , Joao Pinto References: <20170321151211.31841-1-thierry.reding@gmail.com> <20170321151211.31841-3-thierry.reding@gmail.com> <20170321164249.GB31875@ulmo.ba.sec> CC: "David S . Miller" , Giuseppe Cavallaro , Alexandre Torgue , "LABBE Corentin" , , From: Joao Pinto Message-ID: Date: Tue, 21 Mar 2017 16:50:11 +0000 User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:45.0) Gecko/20100101 Thunderbird/45.8.0 MIME-Version: 1.0 In-Reply-To: <20170321164249.GB31875@ulmo.ba.sec> Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.107.19.117] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Às 4:42 PM de 3/21/2017, Thierry Reding escreveu: > On Tue, Mar 21, 2017 at 03:23:00PM +0000, Joao Pinto wrote: >> Às 3:12 PM de 3/21/2017, Thierry Reding escreveu: >>> From: Thierry Reding >>> >>> Prior to the recent multi-queue changes the driver would configure the >>> queues to use the AVB mode, but the mode then got switched to DCB. The >>> hardware still works fine in DCB mode, but my testing capabilities are >>> limited, so it's safer to revert to the prior setting anyway. >>> >>> Signed-off-by: Thierry Reding >>> --- >>> include/linux/stmmac.h | 4 ++-- >>> 1 file changed, 2 insertions(+), 2 deletions(-) >>> >>> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h >>> index be47b859e954..8349a5c1537b 100644 >>> --- a/include/linux/stmmac.h >>> +++ b/include/linux/stmmac.h >>> @@ -56,8 +56,8 @@ >>> #define MTL_RX_ALGORITHM_WSP 0x5 >>> >>> /* RX/TX Queue Mode */ >>> -#define MTL_QUEUE_DCB 0x0 >>> -#define MTL_QUEUE_AVB 0x1 >>> +#define MTL_QUEUE_AVB 0x0 >>> +#define MTL_QUEUE_DCB 0x1 >>> >>> /* The MDC clock could be set higher than the IEEE 802.3 >>> * specified frequency limit 0f 2.5 MHz, by programming a clock divider >>> >> >> Thierry, I don't understand this patch. It will have 0 impact. >> >> In stmmac_platform configuration, 0 impact: >> >> if (of_property_read_bool(q_node, "snps,dcb-algorithm")) >> plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; >> else if (of_property_read_bool(q_node, "snps,avb-algorithm")) >> plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; >> else >> ** plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; >> >> In dwmac4_core, 0 impact: >> >> value &= GMAC_RX_QUEUE_CLEAR(queue); >> if (mode == MTL_QUEUE_AVB) >> value |= GMAC_RX_AV_QUEUE_ENABLE(queue); >> else if (mode == MTL_QUEUE_DCB) >> value |= GMAC_RX_DCB_QUEUE_ENABLE(queue); >> >> I think you should set the default mode in (**). > > That was my initial attempt, but then I realized that for old DTBs, > stmmac_mtl_setup() will already exit prematurely because of the missing > snps,mtl-{rx,tx}-config properties. It's pretty much for the same reason > as the separate assignment of the default {rx,tx}_queues_to_use. In this > case it's somewhat more obfuscated, though. Changing AVB to be mode 0 > means that plat->rx_queues_cfg[].mode_to_use will contain AVB as default > because plat is devm_kzalloc()'ed. > > Effectively this change makes all queues use AVB by default unless they > are configured using the new device tree bindings. Yes I keep forgeting that :), but you are assuming that plat->rx_queues_cfg[queue].mode_to_use is 0 by default, which might not be the case, but I agree with you that this is the simpler approach. Let's see what others have to say. > > Thierry >