[PATCH 03/15] [media] doc-rst: Fix format of avermedia.rst

[Mauro Carvalho Chehab <mchehab@s-opensource.com>]

This file is almost at the ReST format, but some things need
to be fixed for it to be parsed.

Also, the documentation there is old. So, add a notice about
that.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
 Documentation/media/dvb-drivers/avermedia.rst | 510 ++++++++++++--------------
 Documentation/media/dvb-drivers/index.rst     |   1 +
 2 files changed, 239 insertions(+), 272 deletions(-)

diff --git a/Documentation/media/dvb-drivers/avermedia.rst b/Documentation/media/dvb-drivers/avermedia.rst
index e44c009ac6c5..49cd9c935307 100644
--- a/Documentation/media/dvb-drivers/avermedia.rst
+++ b/Documentation/media/dvb-drivers/avermedia.rst
@@ -1,301 +1,267 @@
 HOWTO: Get An Avermedia DVB-T working under Linux
-	   ______________________________________________
-
-   Table of Contents
-   Assumptions and Introduction
-   The Avermedia DVB-T
-   Getting the card going
-   Receiving DVB-T in Australia
-   Known Limitations
-   Further Update
+-------------------------------------------------
+
+February 14th 2006
+
+.. note::
+
+   This documentation is outdated. Please check at the DVB wiki
+   at https://linuxtv.org/wiki for more updated info.
+
+   There's a section there specific for Avermedia boards at:
+   https://linuxtv.org/wiki/index.php/AVerMedia
+
 
 Assumptions and Introduction
-
-   It  is assumed that the reader understands the basic structure
-   of  the Linux Kernel DVB drivers and the general principles of
-   Digital TV.
-
-   One  significant difference between Digital TV and Analogue TV
-   that  the  unwary  (like  myself)  should  consider  is  that,
-   although  the  component  structure  of budget DVB-T cards are
-   substantially  similar  to Analogue TV cards, they function in
-   substantially different ways.
-
-   The  purpose  of  an  Analogue TV is to receive and display an
-   Analogue  Television  signal. An Analogue TV signal (otherwise
-   known  as  composite  video)  is  an  analogue  encoding  of a
-   sequence  of  image frames (25 per second) rasterised using an
-   interlacing   technique.   Interlacing  takes  two  fields  to
-   represent  one  frame.  Computers today are at their best when
-   dealing  with  digital  signals,  not  analogue  signals and a
-   composite  video signal is about as far removed from a digital
-   data stream as you can get. Therefore, an Analogue TV card for
-   a PC has the following purpose:
-
-     * Tune the receiver to receive a broadcast signal
-     * demodulate the broadcast signal
-     * demultiplex  the  analogue video signal and analogue audio
-       signal  (note some countries employ a digital audio signal
-       embedded  within the modulated composite analogue signal -
-       NICAM.)
-     * digitize  the analogue video signal and make the resulting
-       datastream available to the data bus.
-
-   The  digital  datastream from an Analogue TV card is generated
-   by  circuitry on the card and is often presented uncompressed.
-   For  a PAL TV signal encoded at a resolution of 768x576 24-bit
-   color pixels over 25 frames per second - a fair amount of data
-   is  generated and must be processed by the PC before it can be
-   displayed  on the video monitor screen. Some Analogue TV cards
-   for  PCs  have  onboard  MPEG2  encoders  which permit the raw
-   digital  data  stream  to be presented to the PC in an encoded
-   and  compressed  form  -  similar  to the form that is used in
-   Digital TV.
-
-   The  purpose of a simple budget digital TV card (DVB-T,C or S)
-   is to simply:
-
-     * Tune the received to receive a broadcast signal.
-     * Extract  the encoded digital datastream from the broadcast
-       signal.
-     * Make  the  encoded digital datastream (MPEG2) available to
-       the data bus.
-
-   The  significant  difference between the two is that the tuner
-   on  the analogue TV card spits out an Analogue signal, whereas
-   the  tuner  on  the  digital  TV  card  spits out a compressed
-   encoded   digital   datastream.   As  the  signal  is  already
-   digitised,  it  is  trivial  to pass this datastream to the PC
-   databus  with  minimal  additional processing and then extract
-   the  digital  video  and audio datastreams passing them to the
-   appropriate software or hardware for decoding and viewing.
-     _________________________________________________________
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It  is assumed that the reader understands the basic structure
+of  the Linux Kernel DVB drivers and the general principles of
+Digital TV.
+
+One  significant difference between Digital TV and Analogue TV
+that  the  unwary  (like  myself)  should  consider  is  that,
+although  the  component  structure  of budget DVB-T cards are
+substantially  similar  to Analogue TV cards, they function in
+substantially different ways.
+
+The  purpose  of  an  Analogue TV is to receive and display an
+Analogue  Television  signal. An Analogue TV signal (otherwise
+known  as  composite  video)  is  an  analogue  encoding  of a
+sequence  of  image frames (25 per second) rasterised using an
+interlacing   technique.   Interlacing  takes  two  fields  to
+represent  one  frame.  Computers today are at their best when
+dealing  with  digital  signals,  not  analogue  signals and a
+composite  video signal is about as far removed from a digital
+data stream as you can get. Therefore, an Analogue TV card for
+a PC has the following purpose:
+
+* Tune the receiver to receive a broadcast signal
+* demodulate the broadcast signal
+* demultiplex  the  analogue video signal and analogue audio
+  signal. **NOTE:** some countries employ a digital audio signal
+  embedded  within the modulated composite analogue signal -
+  NICAM.)
+* digitize  the analogue video signal and make the resulting
+  datastream available to the data bus.
+
+The  digital  datastream from an Analogue TV card is generated
+by  circuitry on the card and is often presented uncompressed.
+For  a PAL TV signal encoded at a resolution of 768x576 24-bit
+color pixels over 25 frames per second - a fair amount of data
+is  generated and must be processed by the PC before it can be
+displayed  on the video monitor screen. Some Analogue TV cards
+for  PCs  have  onboard  MPEG2  encoders  which permit the raw
+digital  data  stream  to be presented to the PC in an encoded
+and  compressed  form  -  similar  to the form that is used in
+Digital TV.
+
+The  purpose of a simple budget digital TV card (DVB-T,C or S)
+is to simply:
+
+* Tune the received to receive a broadcast signal.
+* Extract  the encoded digital datastream from the broadcast
+  signal.
+* Make  the  encoded digital datastream (MPEG2) available to
+  the data bus.
+
+The  significant  difference between the two is that the tuner
+on  the analogue TV card spits out an Analogue signal, whereas
+the  tuner  on  the  digital  TV  card  spits out a compressed
+encoded   digital   datastream.   As  the  signal  is  already
+digitised,  it  is  trivial  to pass this datastream to the PC
+databus  with  minimal  additional processing and then extract
+the  digital  video  and audio datastreams passing them to the
+appropriate software or hardware for decoding and viewing.
 
 The Avermedia DVB-T
+~~~~~~~~~~~~~~~~~~~
 
-   The Avermedia DVB-T is a budget PCI DVB card. It has 3 inputs:
+The Avermedia DVB-T is a budget PCI DVB card. It has 3 inputs:
 
-     * RF Tuner Input
-     * Composite Video Input (RCA Jack)
-     * SVIDEO Input (Mini-DIN)
+* RF Tuner Input
+* Composite Video Input (RCA Jack)
+* SVIDEO Input (Mini-DIN)
 
-   The  RF  Tuner  Input  is the input to the tuner module of the
-   card.  The  Tuner  is  otherwise known as the "Frontend" . The
-   Frontend of the Avermedia DVB-T is a Microtune 7202D. A timely
-   post  to  the  linux-dvb  mailing  list  ascertained  that the
-   Microtune  7202D  is  supported  by the sp887x driver which is
-   found in the dvb-hw CVS module.
+The  RF  Tuner  Input  is the input to the tuner module of the
+card.  The  Tuner  is  otherwise known as the "Frontend" . The
+Frontend of the Avermedia DVB-T is a Microtune 7202D. A timely
+post  to  the  linux-dvb  mailing  list  ascertained  that the
+Microtune  7202D  is  supported  by the sp887x driver which is
+found in the dvb-hw CVS module.
+
+The  DVB-T card is based around the BT878 chip which is a very
+common multimedia bridge and often found on Analogue TV cards.
+There is no on-board MPEG2 decoder, which means that all MPEG2
+decoding  must  be done in software, or if you have one, on an
+MPEG2 hardware decoding card or chipset.
 
-   The  DVB-T card is based around the BT878 chip which is a very
-   common multimedia bridge and often found on Analogue TV cards.
-   There is no on-board MPEG2 decoder, which means that all MPEG2
-   decoding  must  be done in software, or if you have one, on an
-   MPEG2 hardware decoding card or chipset.
-     _________________________________________________________
 
 Getting the card going
-
-   In order to fire up the card, it is necessary to load a number
-   of modules from the DVB driver set. Prior to this it will have
-   been  necessary to download these drivers from the linuxtv CVS
-   server and compile them successfully.
-
-   Depending on the card's feature set, the Device Driver API for
-   DVB under Linux will expose some of the following device files
-   in the /dev tree:
-
-     * /dev/dvb/adapter0/audio0
-     * /dev/dvb/adapter0/ca0
-     * /dev/dvb/adapter0/demux0
-     * /dev/dvb/adapter0/dvr0
-     * /dev/dvb/adapter0/frontend0
-     * /dev/dvb/adapter0/net0
-     * /dev/dvb/adapter0/osd0
-     * /dev/dvb/adapter0/video0
-
-   The  primary  device  nodes that we are interested in (at this
-   stage) for the Avermedia DVB-T are:
-
-     * /dev/dvb/adapter0/dvr0
-     * /dev/dvb/adapter0/frontend0
-
-   The dvr0 device node is used to read the MPEG2 Data Stream and
-   the frontend0 node is used to tune the frontend tuner module.
-
-   At  this  stage,  it  has  not  been  able  to  ascertain  the
-   functionality  of the remaining device nodes in respect of the
-   Avermedia  DVBT.  However,  full  functionality  in respect of
-   tuning,  receiving  and  supplying  the  MPEG2  data stream is
-   possible  with the currently available versions of the driver.
-   It  may be possible that additional functionality is available
-   from  the  card  (i.e.  viewing the additional analogue inputs
-   that  the card presents), but this has not been tested yet. If
-   I get around to this, I'll update the document with whatever I
-   find.
-
-   To  power  up  the  card,  load  the  following modules in the
-   following order:
-
-     * modprobe bttv (normally loaded automatically)
-     * modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)
-
-   Insertion  of  these  modules  into  the  running  kernel will
-   activate the appropriate DVB device nodes. It is then possible
-   to start accessing the card with utilities such as scan, tzap,
-   dvbstream etc.
-
-   The frontend module sp887x.o, requires an external   firmware.
-   Please use  the  command "get_dvb_firmware sp887x" to download
-   it. Then copy it to /usr/lib/hotplug/firmware or /lib/firmware/
-   (depending on configuration of firmware hotplug).
+~~~~~~~~~~~~~~~~~~~~~~
+
+In order to fire up the card, it is necessary to load a number
+of modules from the DVB driver set. Prior to this it will have
+been  necessary to download these drivers from the linuxtv CVS
+server and compile them successfully.
+
+Depending on the card's feature set, the Device Driver API for
+DVB under Linux will expose some of the following device files
+in the /dev tree:
+
+* /dev/dvb/adapter0/audio0
+* /dev/dvb/adapter0/ca0
+* /dev/dvb/adapter0/demux0
+* /dev/dvb/adapter0/dvr0
+* /dev/dvb/adapter0/frontend0
+* /dev/dvb/adapter0/net0
+* /dev/dvb/adapter0/osd0
+* /dev/dvb/adapter0/video0
+
+The  primary  device  nodes that we are interested in (at this
+stage) for the Avermedia DVB-T are:
+
+* /dev/dvb/adapter0/dvr0
+* /dev/dvb/adapter0/frontend0
+
+The dvr0 device node is used to read the MPEG2 Data Stream and
+the frontend0 node is used to tune the frontend tuner module.
+
+At  this  stage,  it  has  not  been  able  to  ascertain  the
+functionality  of the remaining device nodes in respect of the
+Avermedia  DVBT.  However,  full  functionality  in respect of
+tuning,  receiving  and  supplying  the  MPEG2  data stream is
+possible  with the currently available versions of the driver.
+It  may be possible that additional functionality is available
+from  the  card  (i.e.  viewing the additional analogue inputs
+that  the card presents), but this has not been tested yet. If
+I get around to this, I'll update the document with whatever I
+find.
+
+To  power  up  the  card,  load  the  following modules in the
+following order:
+
+* modprobe bttv (normally loaded automatically)
+* modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)
+
+Insertion  of  these  modules  into  the  running  kernel will
+activate the appropriate DVB device nodes. It is then possible
+to start accessing the card with utilities such as scan, tzap,
+dvbstream etc.
+
+The frontend module sp887x.o, requires an external   firmware.
+Please use  the  command "get_dvb_firmware sp887x" to download
+it. Then copy it to /usr/lib/hotplug/firmware or /lib/firmware/
+(depending on configuration of firmware hotplug).
 
 Receiving DVB-T in Australia
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-   I  have  no  experience of DVB-T in other countries other than
-   Australia,  so  I will attempt to explain how it works here in
-   Melbourne  and how this affects the configuration of the DVB-T
-   card.
+I  have  no  experience of DVB-T in other countries other than
+Australia,  so  I will attempt to explain how it works here in
+Melbourne  and how this affects the configuration of the DVB-T
+card.
 
-   The  Digital  Broadcasting  Australia  website has a Reception
-   locatortool which provides information on transponder channels
-   and  frequencies.  My  local  transmitter  happens to be Mount
-   Dandenong.
+The  Digital  Broadcasting  Australia  website has a Reception
+locatortool which provides information on transponder channels
+and  frequencies.  My  local  transmitter  happens to be Mount
+Dandenong.
 
-   The frequencies broadcast by Mount Dandenong are:
+The frequencies broadcast by Mount Dandenong are:
 
-   Table 1. Transponder Frequencies Mount Dandenong, Vic, Aus.
-   Broadcaster Channel Frequency
-   ABC         VHF 12  226.5 MHz
-   TEN         VHF 11  219.5 MHz
-   NINE        VHF 8   191.625 MHz
-   SEVEN       VHF 6   177.5 MHz
-   SBS         UHF 29  536.5 MHz
+Table 1. Transponder Frequencies Mount Dandenong, Vic, Aus.
+Broadcaster Channel Frequency
+ABC         VHF 12  226.5 MHz
+TEN         VHF 11  219.5 MHz
+NINE        VHF 8   191.625 MHz
+SEVEN       VHF 6   177.5 MHz
+SBS         UHF 29  536.5 MHz
 
-   The Scan utility has a set of compiled-in defaults for various
-   countries and regions, but if they do not suit, or if you have
-   a pre-compiled scan binary, you can specify a data file on the
-   command  line which contains the transponder frequencies. Here
-   is a sample file for the above channel transponders:
-# Data file for DVB scan program
-#
-# C Frequency SymbolRate FEC QAM
-# S Frequency Polarisation SymbolRate FEC
-# T Frequency Bandwidth FEC FEC2 QAM Mode Guard Hier
-T 226500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
-T 191625000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
-T 219500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
-T 177500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
-T 536500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
+The Scan utility has a set of compiled-in defaults for various
+countries and regions, but if they do not suit, or if you have
+a pre-compiled scan binary, you can specify a data file on the
+command  line which contains the transponder frequencies. Here
+is a sample file for the above channel transponders:
 
-   The   defaults   for   the  transponder  frequency  and  other
-   modulation parameters were obtained from www.dba.org.au.
+::
 
-   When  Scan  runs, it will output channels.conf information for
-   any  channel's transponders which the card's frontend can lock
-   onto.  (i.e.  any  whose  signal  is  strong  enough  at  your
-   antenna).
+	# Data file for DVB scan program
+	#
+	# C Frequency SymbolRate FEC QAM
+	# S Frequency Polarisation SymbolRate FEC
+	# T Frequency Bandwidth FEC FEC2 QAM Mode Guard Hier
+	T 226500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
+	T 191625000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
+	T 219500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
+	T 177500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
+	T 536500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE
 
-   Here's my channels.conf file for anyone who's interested:
-ABC HDTV:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64
-:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:2307:0:560
-ABC TV Melbourne:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_
-4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:65
-0:561
-ABC TV 2:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64
-:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:562
-ABC TV 3:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64
-:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:563
-ABC TV 4:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64
-:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:564
-ABC DiG Radio:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:Q
-AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:2311:56
-6
-TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM
-_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:158
-5
-TEN Digital 1:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:Q
-AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1
-586
-TEN Digital 2:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:Q
-AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1
-587
-TEN Digital 3:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:Q
-AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1
-588
-TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM
-_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:158
-9
-TEN Digital 4:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:Q
-AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1
-590
-TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM
-_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:159
-1
-TEN HD:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:T
-RANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:0:1592
-TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM
-_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:159
-3
-Nine Digital:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QA
-M_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:513:660:10
-72
-Nine Digital HD:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2
-:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:0:1
-073
-Nine Guide:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_
-64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:670:1074
-7 Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_6
-4:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1328
-7 Digital 1:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM
-_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1329
-7 Digital 2:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM
-_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1330
-7 Digital 3:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM
-_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1331
-7 HD Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QA
-M_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:833:834:133
-2
-7 Program Guide:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3
-:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:865:866:
-1334
-SBS HD:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:T
-RANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:102:103:784
-SBS DIGITAL 1:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:Q
-AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:161:81:785
-SBS DIGITAL 2:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:Q
-AM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:162:83:786
-SBS EPG:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:
-TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:163:85:787
-SBS RADIO 1:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM
-_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:201:798
-SBS RADIO 2:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM
-_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:202:799
-     _________________________________________________________
+The   defaults   for   the  transponder  frequency  and  other
+modulation parameters were obtained from www.dba.org.au.
+
+When  Scan  runs, it will output channels.conf information for
+any  channel's transponders which the card's frontend can lock
+onto.  (i.e.  any  whose  signal  is  strong  enough  at  your
+antenna).
+
+Here's my channels.conf file for anyone who's interested:
+
+::
+
+	ABC HDTV:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:2307:0:560
+	ABC TV Melbourne:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:561
+	ABC TV 2:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:562
+	ABC TV 3:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:563
+	ABC TV 4:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:564
+	ABC DiG Radio:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:2311:566
+	TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1585
+	TEN Digital 1:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1586
+	TEN Digital 2:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1587
+	TEN Digital 3:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1588
+	TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1589
+	TEN Digital 4:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1590
+	TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1591
+	TEN HD:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:0:1592
+	TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1593
+	Nine Digital:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:513:660:1072
+	Nine Digital HD:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:0:1073
+	Nine Guide:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:670:1074
+	7 Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1328
+	7 Digital 1:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1329
+	7 Digital 2:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1330
+	7 Digital 3:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1331
+	7 HD Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:833:834:1332
+	7 Program Guide:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:865:866:1334
+	SBS HD:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:102:103:784
+	SBS DIGITAL 1:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:161:81:785
+	SBS DIGITAL 2:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:162:83:786
+	SBS EPG:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:163:85:787
+	SBS RADIO 1:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:201:798
+	SBS RADIO 2:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:202:799
 
 Known Limitations
+~~~~~~~~~~~~~~~~~
 
-   At  present  I can say with confidence that the frontend tunes
-   via /dev/dvb/adapter{x}/frontend0 and supplies an MPEG2 stream
-   via   /dev/dvb/adapter{x}/dvr0.   I   have   not   tested  the
-   functionality  of any other part of the card yet. I will do so
-   over time and update this document.
+At  present  I can say with confidence that the frontend tunes
+via /dev/dvb/adapter{x}/frontend0 and supplies an MPEG2 stream
+via   /dev/dvb/adapter{x}/dvr0.   I   have   not   tested  the
+functionality  of any other part of the card yet. I will do so
+over time and update this document.
 
-   There  are some limitations in the i2c layer due to a returned
-   error message inconsistency. Although this generates errors in
-   dmesg  and  the  system logs, it does not appear to affect the
-   ability of the frontend to function correctly.
-     _________________________________________________________
+There  are some limitations in the i2c layer due to a returned
+error message inconsistency. Although this generates errors in
+dmesg  and  the  system logs, it does not appear to affect the
+ability of the frontend to function correctly.
 
 Further Update
+~~~~~~~~~~~~~~
 
-   dvbstream  and  VideoLAN  Client on windows works a treat with
-   DVB,  in  fact  this  is  currently  serving as my main way of
-   viewing  DVB-T  at  the  moment.  Additionally, VLC is happily
-   decoding  HDTV  signals,  although  the PC is dropping the odd
-   frame here and there - I assume due to processing capability -
-   as all the decoding is being done under windows in software.
+dvbstream  and  VideoLAN  Client on windows works a treat with
+DVB,  in  fact  this  is  currently  serving as my main way of
+viewing  DVB-T  at  the  moment.  Additionally, VLC is happily
+decoding  HDTV  signals,  although  the PC is dropping the odd
+frame here and there - I assume due to processing capability -
+as all the decoding is being done under windows in software.
 
-   Many  thanks to Nigel Pearson for the updates to this document
-   since the recent revision of the driver.
-
-   February 14th 2006
+Many  thanks to Nigel Pearson for the updates to this document
+since the recent revision of the driver.
diff --git a/Documentation/media/dvb-drivers/index.rst b/Documentation/media/dvb-drivers/index.rst
index 6ec5549d2f07..2a09e9d22664 100644
--- a/Documentation/media/dvb-drivers/index.rst
+++ b/Documentation/media/dvb-drivers/index.rst
@@ -19,3 +19,4 @@ License".
 	:maxdepth: 5
 
 	intro
+	avermedia
-- 
2.7.4