* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20171023045432epcas2p37d83600c293491c657180667df894ae6@epcas2p3.samsung.com>
@ 2017-10-23 4:54 ` Jaehoon Chung
2017-10-24 7:58 ` Jaehoon Chung
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-10-23 4:54 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches to u-boot/master?
To develop the supporting HS200 mode, each host driver also needs to implement something.
First step is the applying JJ's patches.
If there is a problem, let me know, plz.
The following changes since commit 0def58f7fd26a237bb08cfbd58ec53372b1ad06b:
Merge git://git.denx.de/u-boot-x86 (2017-10-19 11:19:38 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to f58da60cfdbe896d62a0ec61cd41a52cfc82c526:
mmc: replace the printf() instead of error() (2017-10-23 13:48:39 +0900)
----------------------------------------------------------------
Jaehoon Chung (1):
mmc: replace the printf() instead of error()
Jean-Jacques Hiblot (17):
mmc: dm: get the IO-line and main voltage regulators from the dts
mmc: split mmc_startup()
mmc: move the MMC startup for version above v4.0 in a separate function
mmc: make ext_csd part of struct mmc
mmc: add a function to read and test the ext csd (mmc >= 4)
mmc: introduce mmc modes
mmc: Add a function to dump the mmc capabilities
mmc: use mmc modes to select the correct bus speed
cmd: mmc: display the mode name and current bus speed in the mmc info
mmc: refactor SD startup to make it easier to support new modes
mmc: refactor MMC startup to make it easier to support new modes
mmc: Add a new callback function to perform the 74 clocks cycle sequence
mmc: Add support for UHS modes
mmc: disable UHS modes if Vcc cannot be switched on and off
mmc: Change mode when switching to a boot partition
mmc: use the right voltage level for MMC DDR and HS200 modes
mmc: add a library function to send tuning command
Kishon Vijay Abraham I (9):
mmc: make mmc_set_ios() return status
mmc: Enable signal voltage to be selected from mmc core
mmc: add power cyle support in mmc core
mmc: add a new mmc parameter to disable mmc clock
mmc: disable the mmc clock during power off
mmc: Add a execute_tuning() callback to the mmc operations.
mmc: add HS200 support in MMC core
mmc: Retry some MMC cmds on failure
dm: mmc: Add a library function to parse generic dt binding
Suniel Mahesh (2):
drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
drivers: mmc: Avoid memory leak in case of failure
cmd/mmc.c | 3 +-
drivers/mmc/Kconfig | 23 +
drivers/mmc/exynos_dw_mmc.c | 3 +
drivers/mmc/fsl_esdhc.c | 2 +-
drivers/mmc/mmc-uclass.c | 87 +++
drivers/mmc/mmc.c | 1517 ++++++++++++++++++++++++++++++++-----------
include/mmc.h | 176 ++++-
7 files changed, 1423 insertions(+), 388 deletions(-)
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-10-23 4:54 ` [U-Boot] [GIT PULL] Please pull u-boot-mmc master Jaehoon Chung
@ 2017-10-24 7:58 ` Jaehoon Chung
0 siblings, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-10-24 7:58 UTC (permalink / raw)
To: u-boot
Dear Tom,
On 10/23/2017 01:54 PM, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> To develop the supporting HS200 mode, each host driver also needs to implement something.
> First step is the applying JJ's patches.
Discard this PR. After checking more, i will resend the PR.
Best Regards,
Jaehoon Chung
>
> If there is a problem, let me know, plz.
>
> The following changes since commit 0def58f7fd26a237bb08cfbd58ec53372b1ad06b:
>
> Merge git://git.denx.de/u-boot-x86 (2017-10-19 11:19:38 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to f58da60cfdbe896d62a0ec61cd41a52cfc82c526:
>
> mmc: replace the printf() instead of error() (2017-10-23 13:48:39 +0900)
>
> ----------------------------------------------------------------
> Jaehoon Chung (1):
> mmc: replace the printf() instead of error()
>
> Jean-Jacques Hiblot (17):
> mmc: dm: get the IO-line and main voltage regulators from the dts
> mmc: split mmc_startup()
> mmc: move the MMC startup for version above v4.0 in a separate function
> mmc: make ext_csd part of struct mmc
> mmc: add a function to read and test the ext csd (mmc >= 4)
> mmc: introduce mmc modes
> mmc: Add a function to dump the mmc capabilities
> mmc: use mmc modes to select the correct bus speed
> cmd: mmc: display the mode name and current bus speed in the mmc info
> mmc: refactor SD startup to make it easier to support new modes
> mmc: refactor MMC startup to make it easier to support new modes
> mmc: Add a new callback function to perform the 74 clocks cycle sequence
> mmc: Add support for UHS modes
> mmc: disable UHS modes if Vcc cannot be switched on and off
> mmc: Change mode when switching to a boot partition
> mmc: use the right voltage level for MMC DDR and HS200 modes
> mmc: add a library function to send tuning command
>
> Kishon Vijay Abraham I (9):
> mmc: make mmc_set_ios() return status
> mmc: Enable signal voltage to be selected from mmc core
> mmc: add power cyle support in mmc core
> mmc: add a new mmc parameter to disable mmc clock
> mmc: disable the mmc clock during power off
> mmc: Add a execute_tuning() callback to the mmc operations.
> mmc: add HS200 support in MMC core
> mmc: Retry some MMC cmds on failure
> dm: mmc: Add a library function to parse generic dt binding
>
> Suniel Mahesh (2):
> drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
> drivers: mmc: Avoid memory leak in case of failure
>
> cmd/mmc.c | 3 +-
> drivers/mmc/Kconfig | 23 +
> drivers/mmc/exynos_dw_mmc.c | 3 +
> drivers/mmc/fsl_esdhc.c | 2 +-
> drivers/mmc/mmc-uclass.c | 87 +++
> drivers/mmc/mmc.c | 1517 ++++++++++++++++++++++++++++++++-----------
> include/mmc.h | 176 ++++-
> 7 files changed, 1423 insertions(+), 388 deletions(-)
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20180508072215epcas1p2cbd07880b5188605fe679ccb248b87eb@epcas1p2.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20180508072215epcas1p2cbd07880b5188605fe679ccb248b87eb@epcas1p2.samsung.com>
@ 2018-05-08 7:22 ` Jaehoon Chung
2018-05-09 1:30 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2018-05-08 7:22 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches to u-boot/master?
If there is a problem, let me know, plz.
The following changes since commit a43d46a73cb2c40481791cb292b8eb0b5a80d55e:
arm: v7R: Add support for enabling caches (2018-05-07 15:53:29 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to e1fd9e6bb88a3f42e7e89e9c59589dbf904efe23:
power: pwm regulator: support live tree (2018-05-08 13:12:33 +0900)
----------------------------------------------------------------
Andy Yan (1):
power: pwm regulator: support live tree
Jaehoon Chung (6):
configs: trats2: enable the max77686 regulator config
power: pmic_max77686: remove the old pmic_max77686 file
lib: fdtdec: drop the old compatible about max77686
mmc: add the MMC_CLK_ENABLE/DISABLE macro in mmc.h
mmc: add the debug message in mmc_set_clock
mmc: Kconfig: add the MMC_TRACE config in Kconfig
Patrick Bruenn (1):
dm: mmc: socfpga: call dwmci_probe()
configs/trats2_defconfig | 2 +
drivers/mmc/Kconfig | 8 +
drivers/mmc/fsl_esdhc.c | 2 +-
drivers/mmc/meson_gx_mmc.c | 2 +-
drivers/mmc/mmc.c | 20 ++-
drivers/mmc/socfpga_dw_mmc.c | 2 +-
drivers/power/pmic/Makefile | 1 -
drivers/power/pmic/pmic_max77686.c | 303 --------------------------------
drivers/power/regulator/pwm_regulator.c | 15 +-
include/fdtdec.h | 1 -
include/mmc.h | 3 +
lib/fdtdec.c | 1 -
12 files changed, 32 insertions(+), 328 deletions(-)
delete mode 100644 drivers/power/pmic/pmic_max77686.c
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2018-05-08 7:22 ` Jaehoon Chung
@ 2018-05-09 1:30 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2018-05-09 1:30 UTC (permalink / raw)
To: u-boot
On Tue, May 08, 2018 at 04:22:14PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> If there is a problem, let me know, plz.
>
> The following changes since commit a43d46a73cb2c40481791cb292b8eb0b5a80d55e:
>
> arm: v7R: Add support for enabling caches (2018-05-07 15:53:29 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to e1fd9e6bb88a3f42e7e89e9c59589dbf904efe23:
>
> power: pwm regulator: support live tree (2018-05-08 13:12:33 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180508/d8ef7a07/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20180502020320epcas1p1b59166567ba1b0c1bb1c700503bc2d09@epcas1p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20180502020320epcas1p1b59166567ba1b0c1bb1c700503bc2d09@epcas1p1.samsung.com>
@ 2018-05-02 2:03 ` Jaehoon Chung
2018-05-02 22:10 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2018-05-02 2:03 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches to u-boot/master?
There are the fixing patches.
Other mmc patches are applied to u-boot-mmc/next branch. I will send the PR about them at next.
If there is a problem, let me know, plz.
Sorry for late.
The following changes since commit ec1754f091c3c06d76592a3f9fecf6184f27e4c9:
Prepare v2018.05-rc3 (2018-05-01 09:09:31 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 4bf225aa87a11f5d22b22d469e77d005ad441fd8:
drivers:power:max77693: remove redundant logical constraint (2018-05-02 10:57:43 +0900)
----------------------------------------------------------------
Hannes Schmelzer (2):
mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE
mmc: zynq_sdhci: use correct quirk if CONFIG_ZYNQ_HISPD_BROKEN is defined
Heinrich Schuchardt (1):
drivers:power:max77693: remove redundant logical constraint
Jaehoon Chung (1):
samsung: board: init the s2mps11 pmic during booting time
Peng Fan (1):
mmc: fix return value check condition
board/samsung/common/exynos5-dt.c | 4 ++++
drivers/mmc/mmc.c | 2 +-
drivers/mmc/sdhci.c | 8 +++++++-
drivers/mmc/zynq_sdhci.c | 2 +-
drivers/power/mfd/fg_max77693.c | 2 --
include/sdhci.h | 6 ++++++
6 files changed, 19 insertions(+), 5 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2018-05-02 2:03 ` Jaehoon Chung
@ 2018-05-02 22:10 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2018-05-02 22:10 UTC (permalink / raw)
To: u-boot
On Wed, May 02, 2018 at 11:03:20AM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> There are the fixing patches.
> Other mmc patches are applied to u-boot-mmc/next branch. I will send the PR about them at next.
> If there is a problem, let me know, plz.
>
> Sorry for late.
>
> The following changes since commit ec1754f091c3c06d76592a3f9fecf6184f27e4c9:
>
> Prepare v2018.05-rc3 (2018-05-01 09:09:31 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 4bf225aa87a11f5d22b22d469e77d005ad441fd8:
>
> drivers:power:max77693: remove redundant logical constraint (2018-05-02 10:57:43 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180502/fbe0d803/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20180226015859epcas1p30bda4a35316c512366573946d617d484@epcas1p3.samsung.com>]
* [U-Boot] [GIT PULL ] Please pull u-boot-mmc master
[not found] <CGME20180226015859epcas1p30bda4a35316c512366573946d617d484@epcas1p3.samsung.com>
@ 2018-02-26 1:58 ` Jaehoon Chung
2018-02-26 15:49 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2018-02-26 1:58 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches to u-boot/master?
The following changes since commit f0f6917188ad660cf002c10095f46ecf748b8f58:
Prepare v2018.03-rc3 (2018-02-20 16:51:56 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to beac7d33d9131d22ffbdbfbf2786858062b63786:
mmc: omap_hsmmc: use a default 52MHz max clock rate if none is specified (2018-02-26 10:52:15 +0900)
----------------------------------------------------------------
Alexander Kochetkov (1):
mmc: fix off-by-one bug in mmc_startup_v4()
Faiz Abbas (1):
mmc: Drop unnecessary case for mmc_probe()
Jaehoon Chung (1):
mmc: synchronize the sequence with enum bus_mode in mmc.h
Jean-Jacques Hiblot (4):
mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat
mmc: omap_hsmmc: compile out write support if not needed
mmc: omap_hsmmc: make it possible to compile out ADMA support
mmc: omap_hsmmc: use a default 52MHz max clock rate if none is specified
arch/arm/include/asm/omap_mmc.h | 2 +-
drivers/mmc/Kconfig | 9 +++++++++
drivers/mmc/mmc.c | 20 +++++---------------
drivers/mmc/omap_hsmmc.c | 31 ++++++++++++++++++++-----------
4 files changed, 35 insertions(+), 27 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL ] Please pull u-boot-mmc master
2018-02-26 1:58 ` [U-Boot] [GIT PULL ] " Jaehoon Chung
@ 2018-02-26 15:49 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2018-02-26 15:49 UTC (permalink / raw)
To: u-boot
On Mon, Feb 26, 2018 at 10:58:59AM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
>
> The following changes since commit f0f6917188ad660cf002c10095f46ecf748b8f58:
>
> Prepare v2018.03-rc3 (2018-02-20 16:51:56 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to beac7d33d9131d22ffbdbfbf2786858062b63786:
>
> mmc: omap_hsmmc: use a default 52MHz max clock rate if none is specified (2018-02-26 10:52:15 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180226/5c166608/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20180220035728epcas2p152ee76e870ed334c7e91ef8d7ec0b699@epcas2p1.samsung.com>]
* [U-Boot] [GIT PULL ] Please pull u-boot-mmc master
[not found] <CGME20180220035728epcas2p152ee76e870ed334c7e91ef8d7ec0b699@epcas2p1.samsung.com>
@ 2018-02-20 3:57 ` Jaehoon Chung
2018-02-20 13:20 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2018-02-20 3:57 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches into u-boot/master?
The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:
Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 4a41fec589b5f57bc83fca423222c6a1860a50f5:
mmc: Fix uninitialised priv member (2018-02-19 17:00:33 +0900)
----------------------------------------------------------------
Alex Kiernan (1):
mmc: Fix uninitialised priv member
Jean-Jacques Hiblot (15):
mmc: omap_hsmmc: cleanup clock configuration
mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
mmc: omap_hsmmc: Add tuning support
mmc: omap_hsmmc: Workaround for errata id i802
mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm
mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl
mmc: omap_hsmmc: update mmc->clock with the actual bus speed
mmc: omap_hsmmc: implement send_init_stream callback
mmc: omap_hsmmc: add signal voltage selection support
ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes
dts: am57xx-beagle-x15: disable UHS and HS200 support
dts: am57xx-idk: disable HS200 support
configs: dra7xx_evm/dra7xx_hs_evm: Enable MMC HS200 and SD UHS support
mmc: Fix bug in sd_set_card_speed()
mmc: fix bug in mmc_startup_v4()
Kishon Vijay Abraham I (11):
mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios
mmc: omap_hsmmc: add support to set default io voltage
mmc: omap_hsmmc: Enable DDR mode support
mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot
mmc: omap_hsmmc: Add support to set IODELAY values
mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions
mmc: omap_hsmmc: allow mmc clock to be gated
ARM: OMAP5: set mmc clock frequency to 192MHz
ARM: dts: DRA7: use new dra7-specific compatible string
ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1
Masahiro Yamada (1):
mmc: use pr_* log functions
arch/arm/dts/am57xx-beagle-x15.dts | 6 +
arch/arm/dts/am57xx-idk-common.dtsi | 2 +
arch/arm/dts/dra7.dtsi | 22 +-
arch/arm/include/asm/arch-omap5/clock.h | 2 +-
arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h | 3 +
arch/arm/include/asm/arch-omap5/sys_proto.h | 7 +
arch/arm/include/asm/omap_mmc.h | 59 +-
arch/arm/mach-omap2/omap5/dra7xx_iodelay.c | 30 +
arch/arm/mach-omap2/omap5/hw_data.c | 10 +-
board/ti/am57xx/board.c | 30 +
board/ti/dra7xx/evm.c | 29 +
configs/dra7xx_evm_defconfig | 3 +
configs/dra7xx_hs_evm_defconfig | 3 +
drivers/mmc/mmc.c | 71 +-
drivers/mmc/omap_hsmmc.c | 954 +++++++++++++++++++++--
include/configs/am57xx_evm.h | 2 -
include/configs/dra7xx_evm.h | 2 -
include/mmc.h | 1 +
18 files changed, 1125 insertions(+), 111 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL ] Please pull u-boot-mmc master
2018-02-20 3:57 ` Jaehoon Chung
@ 2018-02-20 13:20 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2018-02-20 13:20 UTC (permalink / raw)
To: u-boot
On Tue, Feb 20, 2018 at 12:57:28PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches into u-boot/master?
>
>
> The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:
>
> Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 4a41fec589b5f57bc83fca423222c6a1860a50f5:
>
> mmc: Fix uninitialised priv member (2018-02-19 17:00:33 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180220/ff49d04a/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20180219112702epcas1p2bb88ec4017cd6b54b2ea2d8801ec3835@epcas1p2.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20180219112702epcas1p2bb88ec4017cd6b54b2ea2d8801ec3835@epcas1p2.samsung.com>
@ 2018-02-19 11:27 ` Jaehoon Chung
2018-02-19 14:47 ` Jaehoon Chung
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2018-02-19 11:27 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches to u-boot/master?
If there is a problem, let me know, plz.
The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:
Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to dfca07d60e8d1977fff5531291d0a39b8384d0a9:
mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support (2018-02-19 20:19:20 +0900)
----------------------------------------------------------------
Alex Kiernan (1):
mmc: Fix uninitialised priv member
Jean-Jacques Hiblot (15):
mmc: omap_hsmmc: cleanup clock configuration
mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
mmc: omap_hsmmc: Add tuning support
mmc: omap_hsmmc: Workaround for errata id i802
mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm
mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl
mmc: omap_hsmmc: update mmc->clock with the actual bus speed
mmc: omap_hsmmc: implement send_init_stream callback
mmc: omap_hsmmc: add signal voltage selection support
ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes
dts: am57xx-beagle-x15: disable UHS and HS200 support
dts: am57xx-idk: disable HS200 support
configs: dra7xx_evm/dra7xx_hs_evm: Enable MMC HS200 and SD UHS support
mmc: Fix bug in sd_set_card_speed()
mmc: fix bug in mmc_startup_v4()
Kishon Vijay Abraham I (11):
mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios
mmc: omap_hsmmc: add support to set default io voltage
mmc: omap_hsmmc: Enable DDR mode support
mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot
mmc: omap_hsmmc: Add support to set IODELAY values
mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions
mmc: omap_hsmmc: allow mmc clock to be gated
ARM: OMAP5: set mmc clock frequency to 192MHz
ARM: dts: DRA7: use new dra7-specific compatible string
ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1
Marek Vasut (10):
mmc: uniphier-sd: Add compatible strings for RCar Gen2
mmc: uniphier-sd: Use mmc_of_parse()
mmc: uniphier-sd: Add Renesas RCar quirks
mmc: uniphier-sd: Handle Renesas div-by-1
mmc: uniphier-sd: Handle DMA completion flag differences
mmc: uniphier-sd: Handle bus width 0
mmc: uniphier-sd: Always check controller version
mmc: uniphier-sd: Properly handle pin voltage configuration
mmc: uniphier-sd: Export registers and IO accessors
mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support
Masahiro Yamada (1):
mmc: use pr_* log functions
arch/arm/dts/am57xx-beagle-x15.dts | 6 +
arch/arm/dts/am57xx-idk-common.dtsi | 2 +
arch/arm/dts/dra7.dtsi | 22 +-
arch/arm/include/asm/arch-omap5/clock.h | 2 +-
arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h | 3 +
arch/arm/include/asm/arch-omap5/sys_proto.h | 7 +
arch/arm/include/asm/omap_mmc.h | 59 +-
arch/arm/mach-omap2/omap5/dra7xx_iodelay.c | 30 +
arch/arm/mach-omap2/omap5/hw_data.c | 10 +-
board/ti/am57xx/board.c | 30 +
board/ti/dra7xx/evm.c | 29 +
configs/dra7xx_evm_defconfig | 3 +
configs/dra7xx_hs_evm_defconfig | 3 +
drivers/mmc/Kconfig | 9 +
drivers/mmc/Makefile | 1 +
drivers/mmc/mmc.c | 71 +-
drivers/mmc/omap_hsmmc.c | 954 +++++++++++++++++++++--
drivers/mmc/uniphier-sd-rcar.c | 288 +++++++
drivers/mmc/uniphier-sd.c | 274 +++----
drivers/mmc/uniphier-sd.h | 155 ++++
include/configs/am57xx_evm.h | 2 -
include/configs/dra7xx_evm.h | 2 -
include/mmc.h | 1 +
23 files changed, 1697 insertions(+), 266 deletions(-)
create mode 100644 drivers/mmc/uniphier-sd-rcar.c
create mode 100644 drivers/mmc/uniphier-sd.h
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2018-02-19 11:27 ` [U-Boot] [GIT PULL] " Jaehoon Chung
@ 2018-02-19 14:47 ` Jaehoon Chung
2018-02-19 14:48 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2018-02-19 14:47 UTC (permalink / raw)
To: u-boot
Dear Tom,
On 2018년 02월 19일 20:27, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> If there is a problem, let me know, plz.
Discard this PR. I found the Build error from travis-ci. After reverting some patches, will resend the PR.
Best Regards,
Jaehoon Chung
>
> The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:
>
> Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to dfca07d60e8d1977fff5531291d0a39b8384d0a9:
>
> mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support (2018-02-19 20:19:20 +0900)
>
> ----------------------------------------------------------------
> Alex Kiernan (1):
> mmc: Fix uninitialised priv member
>
> Jean-Jacques Hiblot (15):
> mmc: omap_hsmmc: cleanup clock configuration
> mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
> mmc: omap_hsmmc: Add tuning support
> mmc: omap_hsmmc: Workaround for errata id i802
> mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm
> mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl
> mmc: omap_hsmmc: update mmc->clock with the actual bus speed
> mmc: omap_hsmmc: implement send_init_stream callback
> mmc: omap_hsmmc: add signal voltage selection support
> ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes
> dts: am57xx-beagle-x15: disable UHS and HS200 support
> dts: am57xx-idk: disable HS200 support
> configs: dra7xx_evm/dra7xx_hs_evm: Enable MMC HS200 and SD UHS support
> mmc: Fix bug in sd_set_card_speed()
> mmc: fix bug in mmc_startup_v4()
>
> Kishon Vijay Abraham I (11):
> mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios
> mmc: omap_hsmmc: add support to set default io voltage
> mmc: omap_hsmmc: Enable DDR mode support
> mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
> ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot
> mmc: omap_hsmmc: Add support to set IODELAY values
> mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions
> mmc: omap_hsmmc: allow mmc clock to be gated
> ARM: OMAP5: set mmc clock frequency to 192MHz
> ARM: dts: DRA7: use new dra7-specific compatible string
> ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1
>
> Marek Vasut (10):
> mmc: uniphier-sd: Add compatible strings for RCar Gen2
> mmc: uniphier-sd: Use mmc_of_parse()
> mmc: uniphier-sd: Add Renesas RCar quirks
> mmc: uniphier-sd: Handle Renesas div-by-1
> mmc: uniphier-sd: Handle DMA completion flag differences
> mmc: uniphier-sd: Handle bus width 0
> mmc: uniphier-sd: Always check controller version
> mmc: uniphier-sd: Properly handle pin voltage configuration
> mmc: uniphier-sd: Export registers and IO accessors
> mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support
>
> Masahiro Yamada (1):
> mmc: use pr_* log functions
>
> arch/arm/dts/am57xx-beagle-x15.dts | 6 +
> arch/arm/dts/am57xx-idk-common.dtsi | 2 +
> arch/arm/dts/dra7.dtsi | 22 +-
> arch/arm/include/asm/arch-omap5/clock.h | 2 +-
> arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h | 3 +
> arch/arm/include/asm/arch-omap5/sys_proto.h | 7 +
> arch/arm/include/asm/omap_mmc.h | 59 +-
> arch/arm/mach-omap2/omap5/dra7xx_iodelay.c | 30 +
> arch/arm/mach-omap2/omap5/hw_data.c | 10 +-
> board/ti/am57xx/board.c | 30 +
> board/ti/dra7xx/evm.c | 29 +
> configs/dra7xx_evm_defconfig | 3 +
> configs/dra7xx_hs_evm_defconfig | 3 +
> drivers/mmc/Kconfig | 9 +
> drivers/mmc/Makefile | 1 +
> drivers/mmc/mmc.c | 71 +-
> drivers/mmc/omap_hsmmc.c | 954 +++++++++++++++++++++--
> drivers/mmc/uniphier-sd-rcar.c | 288 +++++++
> drivers/mmc/uniphier-sd.c | 274 +++----
> drivers/mmc/uniphier-sd.h | 155 ++++
> include/configs/am57xx_evm.h | 2 -
> include/configs/dra7xx_evm.h | 2 -
> include/mmc.h | 1 +
> 23 files changed, 1697 insertions(+), 266 deletions(-)
> create mode 100644 drivers/mmc/uniphier-sd-rcar.c
> create mode 100644 drivers/mmc/uniphier-sd.h
>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2018-02-19 14:47 ` Jaehoon Chung
@ 2018-02-19 14:48 ` Tom Rini
2018-02-19 17:00 ` Marek Vasut
0 siblings, 1 reply; 71+ messages in thread
From: Tom Rini @ 2018-02-19 14:48 UTC (permalink / raw)
To: u-boot
On Mon, Feb 19, 2018 at 11:47:28PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> On 2018년 02월 19일 20:27, Jaehoon Chung wrote:
> > Dear Tom,
> >
> > Could you pull these patches to u-boot/master?
> > If there is a problem, let me know, plz.
>
> Discard this PR. I found the Build error from travis-ci. After
> reverting some patches, will resend the PR.
OK, thanks.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180219/eda5cc81/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2018-02-19 14:48 ` Tom Rini
@ 2018-02-19 17:00 ` Marek Vasut
0 siblings, 0 replies; 71+ messages in thread
From: Marek Vasut @ 2018-02-19 17:00 UTC (permalink / raw)
To: u-boot
On 02/19/2018 03:48 PM, Tom Rini wrote:
> On Mon, Feb 19, 2018 at 11:47:28PM +0900, Jaehoon Chung wrote:
>> Dear Tom,
>>
>> On 2018년 02월 19일 20:27, Jaehoon Chung wrote:
>>> Dear Tom,
>>>
>>> Could you pull these patches to u-boot/master?
>>> If there is a problem, let me know, plz.
>>
>> Discard this PR. I found the Build error from travis-ci. After
>> reverting some patches, will resend the PR.
>
> OK, thanks.
The Renesas patches should be for 2018.05 cycle, we're already in RC3 now.
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20180124073159epcas2p18ec97927c7e6c3c04bbe52a8240492fb@epcas2p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20180124073159epcas2p18ec97927c7e6c3c04bbe52a8240492fb@epcas2p1.samsung.com>
@ 2018-01-24 7:31 ` Jaehoon Chung
2018-01-25 0:57 ` Jaehoon Chung
2018-01-25 2:25 ` Tom Rini
0 siblings, 2 replies; 71+ messages in thread
From: Jaehoon Chung @ 2018-01-24 7:31 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches to u-boot/master?
If there is a problem, let me know, plz.
The following changes since commit 557767ed29968af0294e3aae48433e5d5a298e0b:
Merge git://git.denx.de/u-boot-marvell (2018-01-20 08:39:47 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 2f516e4aa286eb0203e34ab9be68b08f7a3c44c1:
mmc: Poll for broken card detection case (2018-01-24 16:12:03 +0900)
----------------------------------------------------------------
Benoît Thébaudeau (1):
mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Jaehoon Chung (5):
mmc: fix the wrong disabling clock
power: regulator: s2mps11: add a regulator driver for s2mps11
power: pmic: s2mps11: probe the regulator driver
configs: odroid-xu3: enable the configs relevant to regulator
mmc: fix to assign to correct clock value when clock is enabling
Jun Nie (1):
mmc: Poll for broken card detection case
Masahiro Yamada (8):
dm: add dev_read_u32()
mmc: do not overwrite cfg->f_max if "max-frequency" if missing
mmc: let mmc_of_parse() fail for insane bus-width value
mmc: sdhci: do not overwrite host_caps in sdhci_setup_cfg()
mmc: sdhci-cadence: use bitfield access macros for cleanup
mmc: sdhci-cadence: call mmc_of_parse()
mmc: sdhci-cadence: add HS200 support
mmc: sdhci: change data transfer failure into debug message
configs/odroid-xu3_defconfig | 2 +
drivers/core/read.c | 5 +
drivers/mmc/Kconfig | 5 +
drivers/mmc/fsl_esdhc.c | 7 +-
drivers/mmc/mmc-uclass.c | 9 +-
drivers/mmc/mmc.c | 16 +-
drivers/mmc/sdhci-cadence.c | 114 +++++-
drivers/mmc/sdhci.c | 6 +-
drivers/power/pmic/s2mps11.c | 28 ++
drivers/power/regulator/Kconfig | 8 +
drivers/power/regulator/Makefile | 1 +
drivers/power/regulator/s2mps11_regulator.c | 597 ++++++++++++++++++++++++++++
include/dm/read.h | 16 +
include/power/s2mps11.h | 55 +++
14 files changed, 836 insertions(+), 33 deletions(-)
create mode 100644 drivers/power/regulator/s2mps11_regulator.c
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2018-01-24 7:31 ` Jaehoon Chung
@ 2018-01-25 0:57 ` Jaehoon Chung
2018-01-25 1:44 ` Tom Rini
2018-01-25 2:25 ` Tom Rini
1 sibling, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2018-01-25 0:57 UTC (permalink / raw)
To: u-boot
Dear Tom,
On 01/24/2018 04:31 PM, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> If there is a problem, let me know, plz.
I don't know what this PR isn't seen at patchwork.
Current u-boot/master branch has the some issue about MMC.
So need to apply the fixing patches for mmc.
Best Regards,
Jaehoon Chung
>
> The following changes since commit 557767ed29968af0294e3aae48433e5d5a298e0b:
>
> Merge git://git.denx.de/u-boot-marvell (2018-01-20 08:39:47 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 2f516e4aa286eb0203e34ab9be68b08f7a3c44c1:
>
> mmc: Poll for broken card detection case (2018-01-24 16:12:03 +0900)
>
> ----------------------------------------------------------------
> Benoît Thébaudeau (1):
> mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
>
> Jaehoon Chung (5):
> mmc: fix the wrong disabling clock
> power: regulator: s2mps11: add a regulator driver for s2mps11
> power: pmic: s2mps11: probe the regulator driver
> configs: odroid-xu3: enable the configs relevant to regulator
> mmc: fix to assign to correct clock value when clock is enabling
>
> Jun Nie (1):
> mmc: Poll for broken card detection case
>
> Masahiro Yamada (8):
> dm: add dev_read_u32()
> mmc: do not overwrite cfg->f_max if "max-frequency" if missing
> mmc: let mmc_of_parse() fail for insane bus-width value
> mmc: sdhci: do not overwrite host_caps in sdhci_setup_cfg()
> mmc: sdhci-cadence: use bitfield access macros for cleanup
> mmc: sdhci-cadence: call mmc_of_parse()
> mmc: sdhci-cadence: add HS200 support
> mmc: sdhci: change data transfer failure into debug message
>
> configs/odroid-xu3_defconfig | 2 +
> drivers/core/read.c | 5 +
> drivers/mmc/Kconfig | 5 +
> drivers/mmc/fsl_esdhc.c | 7 +-
> drivers/mmc/mmc-uclass.c | 9 +-
> drivers/mmc/mmc.c | 16 +-
> drivers/mmc/sdhci-cadence.c | 114 +++++-
> drivers/mmc/sdhci.c | 6 +-
> drivers/power/pmic/s2mps11.c | 28 ++
> drivers/power/regulator/Kconfig | 8 +
> drivers/power/regulator/Makefile | 1 +
> drivers/power/regulator/s2mps11_regulator.c | 597 ++++++++++++++++++++++++++++
> include/dm/read.h | 16 +
> include/power/s2mps11.h | 55 +++
> 14 files changed, 836 insertions(+), 33 deletions(-)
> create mode 100644 drivers/power/regulator/s2mps11_regulator.c
>
> Best Regards,
> Jaehoon Chung
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2018-01-25 0:57 ` Jaehoon Chung
@ 2018-01-25 1:44 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2018-01-25 1:44 UTC (permalink / raw)
To: u-boot
On Thu, Jan 25, 2018 at 09:57:49AM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> On 01/24/2018 04:31 PM, Jaehoon Chung wrote:
> > Dear Tom,
> >
> > Could you pull these patches to u-boot/master?
> > If there is a problem, let me know, plz.
>
> I don't know what this PR isn't seen at patchwork.
> Current u-boot/master branch has the some issue about MMC.
> So need to apply the fixing patches for mmc.
I've seen a number of PRs not show up in patchwork of late, I'm not sure
why. I'm testing this locally and will push it soon, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180124/d4ab4b5d/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2018-01-24 7:31 ` Jaehoon Chung
2018-01-25 0:57 ` Jaehoon Chung
@ 2018-01-25 2:25 ` Tom Rini
1 sibling, 0 replies; 71+ messages in thread
From: Tom Rini @ 2018-01-25 2:25 UTC (permalink / raw)
To: u-boot
On Wed, Jan 24, 2018 at 04:31:58PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> If there is a problem, let me know, plz.
>
> The following changes since commit 557767ed29968af0294e3aae48433e5d5a298e0b:
>
> Merge git://git.denx.de/u-boot-marvell (2018-01-20 08:39:47 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 2f516e4aa286eb0203e34ab9be68b08f7a3c44c1:
>
> mmc: Poll for broken card detection case (2018-01-24 16:12:03 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180124/5ff711dc/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20180115023505epcas1p37c76459b4841dd1817c53159477db616@epcas1p3.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20180115023505epcas1p37c76459b4841dd1817c53159477db616@epcas1p3.samsung.com>
@ 2018-01-15 2:35 ` Jaehoon Chung
2018-01-15 13:53 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2018-01-15 2:35 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches to u-boot/master?
Main topic is the support for HS200/UHS mode.
If there are any problem, let me know. After applying to u-boot/master, will apply the other patches.
The following changes since commit f3dd87e0b98999a78e500e8c6d2b063ebadf535a:
Prepare v2018.01 (2018-01-08 20:25:29 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to db359efd5907edbeaea2e3eb3504729f60208cd8:
mmc: fsl_esdhc: Fix eMMC 1.8v setting issue (2018-01-13 00:08:44 +0900)
----------------------------------------------------------------
Felix Brack (1):
mmc: sanitize includes for DM i2c
Heinrich Schuchardt (1):
mmc: sdhci: do not compare pointer to 0
Jaehoon Chung (1):
mmc: meson_gx_mmc: fix the complie error
Jean-Jacques Hiblot (38):
mmc: dm: get the IO-line and main voltage regulators from the dts
mmc: split mmc_startup()
mmc: move the MMC startup for version above v4.0 in a separate function
mmc: make ext_csd part of struct mmc
mmc: add a function to read and test the ext csd (mmc >= 4)
mmc: introduce mmc modes
mmc: Add a function to dump the mmc capabilities
mmc: use mmc modes to select the correct bus speed
cmd: mmc: display the mode name and current bus speed in the mmc info
mmc: refactor SD startup to make it easier to support new modes
mmc: refactor MMC startup to make it easier to support new modes
mmc: Add a new callback function to perform the 74 clocks cycle sequence
mmc: Add support for UHS modes
mmc: disable UHS modes if Vcc cannot be switched on and off
mmc: Change mode when switching to a boot partition
mmc: use the right voltage level for MMC DDR and HS200 modes
mmc: add a library function to send tuning command
mmc: dump card and host capabilities if debug is enabled
dm: mmc: update mmc_of_parse()
mmc: Fixed a problem with old sd or mmc that do not support High speed
mmc: all hosts support 1-bit bus width and legacy timings
mmc: fix for old MMCs (below version 4)
mmc: don't use malloc_cache_aligned()
mmc: convert most of printf() to pr_err() and pr_warn()
mmc: make UHS and HS200 optional
mmc: make optional the support for eMMC hardware partitioning
configs: openrd: removed support for eMMC hardware partitioning
configs: omapl138_lcdk: decrease the loglevel to reduce the size of the SPL
dm: mmc: sandbox: Update SD card emulation
common: do not compile common fastboot code when building the SPL
mmc: atmel: when sending a data command, use the provided block size
mmc: compile out more code if support for UHS and HS200 is not enabled
mmc: reworked version lookup in mmc_startup_v4
mmc: add a Kconfig option to enable the support for MMC write operations
mmc: read ssr only if MMC write support is enabled
mmc: compile out erase and write mmc commands if write operations are not enabled
mmc: don't read the size of eMMC enhanced user data area in SPL
mmc: remove hc_wp_grp_size from struct mmc if not needed
Jorge Ramirez-Ortiz (1):
mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT
Kishon Vijay Abraham I (9):
mmc: make mmc_set_ios() return status
mmc: Enable signal voltage to be selected from mmc core
mmc: add power cyle support in mmc core
mmc: add a new mmc parameter to disable mmc clock
mmc: disable the mmc clock during power off
mmc: Add a execute_tuning() callback to the mmc operations.
mmc: add HS200 support in MMC core
mmc: Retry some MMC cmds on failure
dm: mmc: Add a library function to parse generic dt binding
Peng Fan (1):
mmc: fsl_esdhc: Fix eMMC 1.8v setting issue
Suniel Mahesh (2):
drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
drivers: mmc: Avoid memory leak in case of failure
Tom Rini (2):
am335x_hs_evm: Trim options in SPL to reduce binary size
power: Rearrange code to guard power command with CONFIG_SPL_BUILD guard
cmd/mmc.c | 21 +-
cmd/mvebu/bubt.c | 2 +-
common/Makefile | 2 +
common/spl/Kconfig | 9 +
configs/am335x_hs_evm_defconfig | 4 +
configs/omapl138_lcdk_defconfig | 1 +
configs/openrd_base_defconfig | 1 +
configs/openrd_client_defconfig | 1 +
configs/openrd_ultimate_defconfig | 1 +
drivers/mmc/Kconfig | 76 ++
drivers/mmc/Makefile | 4 +-
drivers/mmc/exynos_dw_mmc.c | 3 +
drivers/mmc/fsl_esdhc.c | 11 +-
drivers/mmc/gen_atmel_mci.c | 42 +-
drivers/mmc/meson_gx_mmc.c | 2 +-
drivers/mmc/mmc-uclass.c | 99 ++-
drivers/mmc/mmc.c | 1642 ++++++++++++++++++++++++++++---------
drivers/mmc/mmc_private.h | 4 +-
drivers/mmc/omap_hsmmc.c | 4 +-
drivers/mmc/sandbox_mmc.c | 5 +-
drivers/mmc/sdhci.c | 7 +-
drivers/power/power_core.c | 61 +-
include/mmc.h | 212 ++++-
23 files changed, 1745 insertions(+), 469 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2018-01-15 2:35 ` Jaehoon Chung
@ 2018-01-15 13:53 ` Tom Rini
2018-01-16 8:50 ` Jaehoon Chung
0 siblings, 1 reply; 71+ messages in thread
From: Tom Rini @ 2018-01-15 13:53 UTC (permalink / raw)
To: u-boot
On Mon, Jan 15, 2018 at 11:35:05AM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> Main topic is the support for HS200/UHS mode.
> If there are any problem, let me know. After applying to u-boot/master, will apply the other patches.
>
> The following changes since commit f3dd87e0b98999a78e500e8c6d2b063ebadf535a:
>
> Prepare v2018.01 (2018-01-08 20:25:29 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to db359efd5907edbeaea2e3eb3504729f60208cd8:
>
> mmc: fsl_esdhc: Fix eMMC 1.8v setting issue (2018-01-13 00:08:44 +0900)
>
Applied to u-boot/master, thanks!
But please note the following issues from checkpatch that need to be
looked into and possibly followed up on:
CHECK: Macro argument reuse 'mwt' - possible side-effects?
#180: FILE: drivers/mmc/mmc.c:1245:
+#define for_each_sd_mode_by_pref(caps, mwt) \
+ for (mwt = sd_modes_by_pref;\
+ mwt < sd_modes_by_pref + ARRAY_SIZE(sd_modes_by_pref);\
+ mwt++) \
+ if (caps & MMC_CAP(mwt->mode))
total: 0 errors, 0 warnings, 1 checks, 265 lines checked
CHECK: Macro argument reuse 'mwt' - possible side-effects?
#159: FILE: drivers/mmc/mmc.c:1382:
+#define for_each_mmc_mode_by_pref(caps, mwt) \
+ for (mwt = mmc_modes_by_pref;\
+ mwt < mmc_modes_by_pref + ARRAY_SIZE(mmc_modes_by_pref);\
+ mwt++) \
+ if (caps & MMC_CAP(mwt->mode))
CHECK: Macro argument reuse 'ecbv' - possible side-effects?
#177: FILE: drivers/mmc/mmc.c:1400:
+#define for_each_supported_width(caps, ddr, ecbv) \
+ for (ecbv = ext_csd_bus_width;\
+ ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\
+ ecbv++) \
+ if ((ddr == ecbv->is_ddr) && (caps & ecbv->cap))
CHECK: Alignment should match open parenthesis
#253: FILE: drivers/mmc/mmc.c:1437:
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_BUS_WIDTH,
WARNING: 'occured' may be misspelled - perhaps 'occurred'?
#292: FILE: drivers/mmc/mmc.c:1469:
+ /* if an error occured, revert to a safer bus mode */
total: 0 errors, 1 warnings, 3 checks, 320 lines checked
WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#7:
function ignore this. Modify mmc_set_ios() and the callers of mmc_set_ios() to
total: 0 errors, 1 warnings, 0 checks, 46 lines checked
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
#30: FILE: drivers/mmc/mmc-uclass.c:100:
+ return -ENOSYS;
total: 0 errors, 1 warnings, 0 checks, 60 lines checked
WARNING: 'capabilites' may be misspelled - perhaps 'capabilities'?
#6:
Add UHS modes to the list of supported modes, get the UHS capabilites of
total: 0 errors, 5 warnings, 0 checks, 381 lines checked
WARNING: line over 80 characters
#59: FILE: drivers/mmc/mmc.c:2217:
+ debug("Unable to do a full power cycle. Disabling the UHS modes for safety\n");
total: 0 errors, 1 warnings, 0 checks, 50 lines checked
WARNING: 'optionnal' may be misspelled - perhaps 'optional'?
#13:
To make it clear that those are optionnal workarounds, a new Kconfig
total: 0 errors, 1 warnings, 0 checks, 102 lines checked
WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#6:
The SDcard initialization procedure does a few more things than it did earlier:
total: 0 errors, 1 warnings, 0 checks, 13 lines checked
WARNING: please write a paragraph that describes the config symbol fully
#50: FILE: common/spl/Kconfig:419:
+config SPL_MMC_WRITE
WARNING: please write a paragraph that describes the config symbol fully
#69: FILE: drivers/mmc/Kconfig:13:
+config MMC_WRITE
total: 0 errors, 2 warnings, 0 checks, 82 lines checked
CHECK: Unbalanced braces around else statement
#85: FILE: drivers/mmc/mmc.c:2089:
+ else {
total: 0 errors, 0 warnings, 1 checks, 116 lines checked
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#35:
new file mode 100644
total: 0 errors, 1 warnings, 0 checks, 403 lines checked
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#27:
new file mode 100644
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180115/1958f295/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2018-01-15 13:53 ` Tom Rini
@ 2018-01-16 8:50 ` Jaehoon Chung
0 siblings, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2018-01-16 8:50 UTC (permalink / raw)
To: u-boot
On 01/15/2018 10:53 PM, Tom Rini wrote:
> On Mon, Jan 15, 2018 at 11:35:05AM +0900, Jaehoon Chung wrote:
>
>> Dear Tom,
>>
>> Could you pull these patches to u-boot/master?
>> Main topic is the support for HS200/UHS mode.
>> If there are any problem, let me know. After applying to u-boot/master, will apply the other patches.
>>
>> The following changes since commit f3dd87e0b98999a78e500e8c6d2b063ebadf535a:
>>
>> Prepare v2018.01 (2018-01-08 20:25:29 -0500)
>>
>> are available in the Git repository at:
>>
>> git://git.denx.de/u-boot-mmc.git master
>>
>> for you to fetch changes up to db359efd5907edbeaea2e3eb3504729f60208cd8:
>>
>> mmc: fsl_esdhc: Fix eMMC 1.8v setting issue (2018-01-13 00:08:44 +0900)
>>
>
> Applied to u-boot/master, thanks!
Thanks!
>
> But please note the following issues from checkpatch that need to be
> looked into and possibly followed up on:
I have also checked from checkpatch.pl..Will fix the something to check.
Best Regards,
Jaehoon Chung
> CHECK: Macro argument reuse 'mwt' - possible side-effects?
> #180: FILE: drivers/mmc/mmc.c:1245:
> +#define for_each_sd_mode_by_pref(caps, mwt) \
> + for (mwt = sd_modes_by_pref;\
> + mwt < sd_modes_by_pref + ARRAY_SIZE(sd_modes_by_pref);\
> + mwt++) \
> + if (caps & MMC_CAP(mwt->mode))
>
> total: 0 errors, 0 warnings, 1 checks, 265 lines checked
> CHECK: Macro argument reuse 'mwt' - possible side-effects?
> #159: FILE: drivers/mmc/mmc.c:1382:
> +#define for_each_mmc_mode_by_pref(caps, mwt) \
> + for (mwt = mmc_modes_by_pref;\
> + mwt < mmc_modes_by_pref + ARRAY_SIZE(mmc_modes_by_pref);\
> + mwt++) \
> + if (caps & MMC_CAP(mwt->mode))
>
> CHECK: Macro argument reuse 'ecbv' - possible side-effects?
> #177: FILE: drivers/mmc/mmc.c:1400:
> +#define for_each_supported_width(caps, ddr, ecbv) \
> + for (ecbv = ext_csd_bus_width;\
> + ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\
> + ecbv++) \
> + if ((ddr == ecbv->is_ddr) && (caps & ecbv->cap))
>
> CHECK: Alignment should match open parenthesis
> #253: FILE: drivers/mmc/mmc.c:1437:
> + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_BUS_WIDTH,
>
> WARNING: 'occured' may be misspelled - perhaps 'occurred'?
> #292: FILE: drivers/mmc/mmc.c:1469:
> + /* if an error occured, revert to a safer bus mode */
>
> total: 0 errors, 1 warnings, 3 checks, 320 lines checked
> WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
> #7:
> function ignore this. Modify mmc_set_ios() and the callers of mmc_set_ios() to
>
> total: 0 errors, 1 warnings, 0 checks, 46 lines checked
> WARNING: ENOSYS means 'invalid syscall nr' and nothing else
> #30: FILE: drivers/mmc/mmc-uclass.c:100:
> + return -ENOSYS;
>
> total: 0 errors, 1 warnings, 0 checks, 60 lines checked
> WARNING: 'capabilites' may be misspelled - perhaps 'capabilities'?
> #6:
> Add UHS modes to the list of supported modes, get the UHS capabilites of
>
> total: 0 errors, 5 warnings, 0 checks, 381 lines checked
> WARNING: line over 80 characters
> #59: FILE: drivers/mmc/mmc.c:2217:
> + debug("Unable to do a full power cycle. Disabling the UHS modes for safety\n");
>
> total: 0 errors, 1 warnings, 0 checks, 50 lines checked
> WARNING: 'optionnal' may be misspelled - perhaps 'optional'?
> #13:
> To make it clear that those are optionnal workarounds, a new Kconfig
>
> total: 0 errors, 1 warnings, 0 checks, 102 lines checked
> WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
> #6:
> The SDcard initialization procedure does a few more things than it did earlier:
>
> total: 0 errors, 1 warnings, 0 checks, 13 lines checked
> WARNING: please write a paragraph that describes the config symbol fully
> #50: FILE: common/spl/Kconfig:419:
> +config SPL_MMC_WRITE
>
> WARNING: please write a paragraph that describes the config symbol fully
> #69: FILE: drivers/mmc/Kconfig:13:
> +config MMC_WRITE
>
> total: 0 errors, 2 warnings, 0 checks, 82 lines checked
> CHECK: Unbalanced braces around else statement
> #85: FILE: drivers/mmc/mmc.c:2089:
> + else {
>
> total: 0 errors, 0 warnings, 1 checks, 116 lines checked
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #35:
> new file mode 100644
>
> total: 0 errors, 1 warnings, 0 checks, 403 lines checked
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #27:
> new file mode 100644
>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20171128022004epcas2p150a95af40d2b05cefb9817e1582f58ab@epcas2p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20171128022004epcas2p150a95af40d2b05cefb9817e1582f58ab@epcas2p1.samsung.com>
@ 2017-11-28 2:20 ` Jaehoon Chung
2017-11-28 12:15 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-11-28 2:20 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches to u-boot/master?
After applied these patches, i will send the patches relevant to fixing patches.
- I have tested the buildman, it's passed.
Note:
- When run "mmc rescan", it is failed with timeout.
- Need to fix the minor issues.
- Need to test about HS200 and UHS mode.
- Before releasing, needs to make the stable for HS200 and UHS mode.
- If there are that i missed some patches, i will rebase on this version.
The following changes since commit 93a51d301ad051ec6f8c6016862c7719b8b434d3:
Merge git://git.denx.de/u-boot-arc (2017-11-24 11:45:15 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to f20c1c47ad289b4266a3be42e12540add8ef551c:
mmc: meson_gx_mmc: fix the complie error (2017-11-27 18:46:30 +0900)
----------------------------------------------------------------
Felix Brack (1):
mmc: sanitize includes for DM i2c
Heinrich Schuchardt (1):
mmc: sdhci: do not compare pointer to 0
Jaehoon Chung (1):
mmc: meson_gx_mmc: fix the complie error
Jean-Jacques Hiblot (17):
mmc: dm: get the IO-line and main voltage regulators from the dts
mmc: split mmc_startup()
mmc: move the MMC startup for version above v4.0 in a separate function
mmc: make ext_csd part of struct mmc
mmc: add a function to read and test the ext csd (mmc >= 4)
mmc: introduce mmc modes
mmc: Add a function to dump the mmc capabilities
mmc: use mmc modes to select the correct bus speed
cmd: mmc: display the mode name and current bus speed in the mmc info
mmc: refactor SD startup to make it easier to support new modes
mmc: refactor MMC startup to make it easier to support new modes
mmc: Add a new callback function to perform the 74 clocks cycle sequence
mmc: Add support for UHS modes
mmc: disable UHS modes if Vcc cannot be switched on and off
mmc: Change mode when switching to a boot partition
mmc: use the right voltage level for MMC DDR and HS200 modes
mmc: add a library function to send tuning command
Jorge Ramirez-Ortiz (1):
mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT
Kishon Vijay Abraham I (9):
mmc: make mmc_set_ios() return status
mmc: Enable signal voltage to be selected from mmc core
mmc: add power cyle support in mmc core
mmc: add a new mmc parameter to disable mmc clock
mmc: disable the mmc clock during power off
mmc: Add a execute_tuning() callback to the mmc operations.
mmc: add HS200 support in MMC core
mmc: Retry some MMC cmds on failure
dm: mmc: Add a library function to parse generic dt binding
Suniel Mahesh (2):
drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
drivers: mmc: Avoid memory leak in case of failure
cmd/mmc.c | 3 +-
drivers/mmc/Kconfig | 23 +
drivers/mmc/exynos_dw_mmc.c | 3 +
drivers/mmc/fsl_esdhc.c | 2 +-
drivers/mmc/meson_gx_mmc.c | 2 +-
drivers/mmc/mmc-uclass.c | 87 +++
drivers/mmc/mmc.c | 1517 ++++++++++++++++++++++++++++++++-----------
drivers/mmc/omap_hsmmc.c | 4 +-
drivers/mmc/sdhci.c | 7 +-
include/mmc.h | 176 ++++-
10 files changed, 1430 insertions(+), 394 deletions(-)
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-11-28 2:20 ` Jaehoon Chung
@ 2017-11-28 12:15 ` Tom Rini
2017-11-28 16:22 ` Jean-Jacques Hiblot
2017-11-30 1:35 ` Jaehoon Chung
0 siblings, 2 replies; 71+ messages in thread
From: Tom Rini @ 2017-11-28 12:15 UTC (permalink / raw)
To: u-boot
On Tue, Nov 28, 2017 at 11:20:04AM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> After applied these patches, i will send the patches relevant to fixing patches.
> - I have tested the buildman, it's passed.
>
> Note:
> - When run "mmc rescan", it is failed with timeout.
> - Need to fix the minor issues.
> - Need to test about HS200 and UHS mode.
> - Before releasing, needs to make the stable for HS200 and UHS mode.
> - If there are that i missed some patches, i will rebase on this version.
>
> The following changes since commit 93a51d301ad051ec6f8c6016862c7719b8b434d3:
>
> Merge git://git.denx.de/u-boot-arc (2017-11-24 11:45:15 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to f20c1c47ad289b4266a3be42e12540add8ef551c:
>
> mmc: meson_gx_mmc: fix the complie error (2017-11-27 18:46:30 +0900)
>
NAK. Some of the listed problems lead to tests failing, and we also
have a number of size problems introduced with this too, please fix.
See https://travis-ci.org/trini/u-boot/builds/308244111
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171128/3a0b61e2/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-11-28 12:15 ` Tom Rini
@ 2017-11-28 16:22 ` Jean-Jacques Hiblot
2017-11-30 1:39 ` Jaehoon Chung
2017-11-30 1:35 ` Jaehoon Chung
1 sibling, 1 reply; 71+ messages in thread
From: Jean-Jacques Hiblot @ 2017-11-28 16:22 UTC (permalink / raw)
To: u-boot
Hi all,
On 28/11/2017 13:15, Tom Rini wrote:
> On Tue, Nov 28, 2017 at 11:20:04AM +0900, Jaehoon Chung wrote:
>
>> Dear Tom,
>>
>> Could you pull these patches to u-boot/master?
>> After applied these patches, i will send the patches relevant to fixing patches.
>> - I have tested the buildman, it's passed.
>>
>> Note:
>> - When run "mmc rescan", it is failed with timeout.
Jaehoon, FYI I don't see this problem with TI-based platforms
>> - Need to fix the minor issues.
>> - Need to test about HS200 and UHS mode.
>> - Before releasing, needs to make the stable for HS200 and UHS mode.
>> - If there are that i missed some patches, i will rebase on this version.
>>
>> The following changes since commit 93a51d301ad051ec6f8c6016862c7719b8b434d3:
>>
>> Merge git://git.denx.de/u-boot-arc (2017-11-24 11:45:15 -0500)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-mmc.git master
>>
>> for you to fetch changes up to f20c1c47ad289b4266a3be42e12540add8ef551c:
>>
>> mmc: meson_gx_mmc: fix the complie error (2017-11-27 18:46:30 +0900)
>>
> NAK. Some of the listed problems lead to tests failing, and we also
> have a number of size problems introduced with this too, please fix.
> See https://travis-ci.org/trini/u-boot/builds/308244111
The support for UHS and HS200 adds a lot of stuff (tuning, IO voltage
control etc.). I'll work to making it optional.
JJ
>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-11-28 16:22 ` Jean-Jacques Hiblot
@ 2017-11-30 1:39 ` Jaehoon Chung
0 siblings, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-11-30 1:39 UTC (permalink / raw)
To: u-boot
On 11/29/2017 01:22 AM, Jean-Jacques Hiblot wrote:
> Hi all,
>
>
> On 28/11/2017 13:15, Tom Rini wrote:
>> On Tue, Nov 28, 2017 at 11:20:04AM +0900, Jaehoon Chung wrote:
>>
>>> Dear Tom,
>>>
>>> Could you pull these patches to u-boot/master?
>>> After applied these patches, i will send the patches relevant to fixing patches.
>>> - I have tested the buildman, it's passed.
>>>
>>> Note:
>>> - When run "mmc rescan", it is failed with timeout.
> Jaehoon, FYI I don't see this problem with TI-based platforms
It seems that the drive what doesn't support DM is occurred.
>>> - Need to fix the minor issues.
>>> - Need to test about HS200 and UHS mode.
>>> - Before releasing, needs to make the stable for HS200 and UHS mode.
>>> - If there are that i missed some patches, i will rebase on this version.
>>>
>>> The following changes since commit 93a51d301ad051ec6f8c6016862c7719b8b434d3:
>>>
>>> Merge git://git.denx.de/u-boot-arc (2017-11-24 11:45:15 -0500)
>>>
>>> are available in the git repository at:
>>>
>>> git://git.denx.de/u-boot-mmc.git master
>>>
>>> for you to fetch changes up to f20c1c47ad289b4266a3be42e12540add8ef551c:
>>>
>>> mmc: meson_gx_mmc: fix the complie error (2017-11-27 18:46:30 +0900)
>>>
>> NAK. Some of the listed problems lead to tests failing, and we also
>> have a number of size problems introduced with this too, please fix.
>> See https://travis-ci.org/trini/u-boot/builds/308244111
> The support for UHS and HS200 adds a lot of stuff (tuning, IO voltage control etc.). I'll work to making it optional.
Also i will check them. Thanks!
Best Regards,
Jaehoon Chung
>
> JJ
>>
>
>
>
>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-11-28 12:15 ` Tom Rini
2017-11-28 16:22 ` Jean-Jacques Hiblot
@ 2017-11-30 1:35 ` Jaehoon Chung
1 sibling, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-11-30 1:35 UTC (permalink / raw)
To: u-boot
On 11/28/2017 09:15 PM, Tom Rini wrote:
> On Tue, Nov 28, 2017 at 11:20:04AM +0900, Jaehoon Chung wrote:
>
>> Dear Tom,
>>
>> Could you pull these patches to u-boot/master?
>> After applied these patches, i will send the patches relevant to fixing patches.
>> - I have tested the buildman, it's passed.
>>
>> Note:
>> - When run "mmc rescan", it is failed with timeout.
>> - Need to fix the minor issues.
>> - Need to test about HS200 and UHS mode.
>> - Before releasing, needs to make the stable for HS200 and UHS mode.
>> - If there are that i missed some patches, i will rebase on this version.
>>
>> The following changes since commit 93a51d301ad051ec6f8c6016862c7719b8b434d3:
>>
>> Merge git://git.denx.de/u-boot-arc (2017-11-24 11:45:15 -0500)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-mmc.git master
>>
>> for you to fetch changes up to f20c1c47ad289b4266a3be42e12540add8ef551c:
>>
>> mmc: meson_gx_mmc: fix the complie error (2017-11-27 18:46:30 +0900)
>>
>
> NAK. Some of the listed problems lead to tests failing, and we also
> have a number of size problems introduced with this too, please fix.
> See https://travis-ci.org/trini/u-boot/builds/308244111
Ok, i will check them. Thanks!
Best Regards,
Jaehoon Chung
>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20171127075849epcas2p2e0e6f0ddab3c8c25ddd093353fa52331@epcas2p2.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20171127075849epcas2p2e0e6f0ddab3c8c25ddd093353fa52331@epcas2p2.samsung.com>
@ 2017-11-27 7:58 ` Jaehoon Chung
2017-11-27 9:31 ` Jaehoon Chung
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-11-27 7:58 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches to u-boot/master?
After applied these patches, i will send the patches relevant to fixing patches.
Note:
- When run "mmc rescan", it is failed with timeout.
- Need to fix the minor issues.
- Need to test about HS200 and UHS mode.
- Before releasing, needs to make the stable for HS200 and UHS mode.
- If there are that i missed some patches, i will rebase on this version.
The following changes since commit 93a51d301ad051ec6f8c6016862c7719b8b434d3:
Merge git://git.denx.de/u-boot-arc (2017-11-24 11:45:15 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 48e4a0a6dd7d4e97dd66353d40932049716a106b:
dm: mmc: Add a library function to parse generic dt binding (2017-11-27 15:51:17 +0900)
----------------------------------------------------------------
Felix Brack (1):
mmc: sanitize includes for DM i2c
Heinrich Schuchardt (1):
mmc: sdhci: do not compare pointer to 0
Jean-Jacques Hiblot (17):
mmc: dm: get the IO-line and main voltage regulators from the dts
mmc: split mmc_startup()
mmc: move the MMC startup for version above v4.0 in a separate function
mmc: make ext_csd part of struct mmc
mmc: add a function to read and test the ext csd (mmc >= 4)
mmc: introduce mmc modes
mmc: Add a function to dump the mmc capabilities
mmc: use mmc modes to select the correct bus speed
cmd: mmc: display the mode name and current bus speed in the mmc info
mmc: refactor SD startup to make it easier to support new modes
mmc: refactor MMC startup to make it easier to support new modes
mmc: Add a new callback function to perform the 74 clocks cycle sequence
mmc: Add support for UHS modes
mmc: disable UHS modes if Vcc cannot be switched on and off
mmc: Change mode when switching to a boot partition
mmc: use the right voltage level for MMC DDR and HS200 modes
mmc: add a library function to send tuning command
Jorge Ramirez-Ortiz (1):
mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT
Kishon Vijay Abraham I (9):
mmc: make mmc_set_ios() return status
mmc: Enable signal voltage to be selected from mmc core
mmc: add power cyle support in mmc core
mmc: add a new mmc parameter to disable mmc clock
mmc: disable the mmc clock during power off
mmc: Add a execute_tuning() callback to the mmc operations.
mmc: add HS200 support in MMC core
mmc: Retry some MMC cmds on failure
dm: mmc: Add a library function to parse generic dt binding
Suniel Mahesh (2):
drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
drivers: mmc: Avoid memory leak in case of failure
cmd/mmc.c | 3 +-
drivers/mmc/Kconfig | 23 +
drivers/mmc/exynos_dw_mmc.c | 3 +
drivers/mmc/fsl_esdhc.c | 2 +-
drivers/mmc/mmc-uclass.c | 87 +++
drivers/mmc/mmc.c | 1517 ++++++++++++++++++++++++++++++++-----------
drivers/mmc/omap_hsmmc.c | 4 +-
drivers/mmc/sdhci.c | 7 +-
include/mmc.h | 176 ++++-
9 files changed, 1429 insertions(+), 393 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-11-27 7:58 ` Jaehoon Chung
@ 2017-11-27 9:31 ` Jaehoon Chung
0 siblings, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-11-27 9:31 UTC (permalink / raw)
To: u-boot
On 11/27/2017 04:58 PM, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> After applied these patches, i will send the patches relevant to fixing patches.
Sorry. Will resend the PR. Discard this PR.
>
> Note:
> - When run "mmc rescan", it is failed with timeout.
> - Need to fix the minor issues.
> - Need to test about HS200 and UHS mode.
> - Before releasing, needs to make the stable for HS200 and UHS mode.
> - If there are that i missed some patches, i will rebase on this version.
>
> The following changes since commit 93a51d301ad051ec6f8c6016862c7719b8b434d3:
>
> Merge git://git.denx.de/u-boot-arc (2017-11-24 11:45:15 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 48e4a0a6dd7d4e97dd66353d40932049716a106b:
>
> dm: mmc: Add a library function to parse generic dt binding (2017-11-27 15:51:17 +0900)
>
> ----------------------------------------------------------------
> Felix Brack (1):
> mmc: sanitize includes for DM i2c
>
> Heinrich Schuchardt (1):
> mmc: sdhci: do not compare pointer to 0
>
> Jean-Jacques Hiblot (17):
> mmc: dm: get the IO-line and main voltage regulators from the dts
> mmc: split mmc_startup()
> mmc: move the MMC startup for version above v4.0 in a separate function
> mmc: make ext_csd part of struct mmc
> mmc: add a function to read and test the ext csd (mmc >= 4)
> mmc: introduce mmc modes
> mmc: Add a function to dump the mmc capabilities
> mmc: use mmc modes to select the correct bus speed
> cmd: mmc: display the mode name and current bus speed in the mmc info
> mmc: refactor SD startup to make it easier to support new modes
> mmc: refactor MMC startup to make it easier to support new modes
> mmc: Add a new callback function to perform the 74 clocks cycle sequence
> mmc: Add support for UHS modes
> mmc: disable UHS modes if Vcc cannot be switched on and off
> mmc: Change mode when switching to a boot partition
> mmc: use the right voltage level for MMC DDR and HS200 modes
> mmc: add a library function to send tuning command
>
> Jorge Ramirez-Ortiz (1):
> mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT
>
> Kishon Vijay Abraham I (9):
> mmc: make mmc_set_ios() return status
> mmc: Enable signal voltage to be selected from mmc core
> mmc: add power cyle support in mmc core
> mmc: add a new mmc parameter to disable mmc clock
> mmc: disable the mmc clock during power off
> mmc: Add a execute_tuning() callback to the mmc operations.
> mmc: add HS200 support in MMC core
> mmc: Retry some MMC cmds on failure
> dm: mmc: Add a library function to parse generic dt binding
>
> Suniel Mahesh (2):
> drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
> drivers: mmc: Avoid memory leak in case of failure
>
> cmd/mmc.c | 3 +-
> drivers/mmc/Kconfig | 23 +
> drivers/mmc/exynos_dw_mmc.c | 3 +
> drivers/mmc/fsl_esdhc.c | 2 +-
> drivers/mmc/mmc-uclass.c | 87 +++
> drivers/mmc/mmc.c | 1517 ++++++++++++++++++++++++++++++++-----------
> drivers/mmc/omap_hsmmc.c | 4 +-
> drivers/mmc/sdhci.c | 7 +-
> include/mmc.h | 176 ++++-
> 9 files changed, 1429 insertions(+), 393 deletions(-)
>
> Best Regards,
> Jaehoon Chung
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170925053103epcas2p190b97c9c8b6b7ce3fa5859b3b662463a@epcas2p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170925053103epcas2p190b97c9c8b6b7ce3fa5859b3b662463a@epcas2p1.samsung.com>
@ 2017-09-25 5:31 ` Jaehoon Chung
2017-09-26 12:17 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-09-25 5:31 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches into u-boot/master?
If there is a problem, let me know, plz.
Other patches needs to check more, so i didn't apply them.
If i need to send PR again, i will send the PR as "take v2" for other patches.
(Patches relevant to HS200 and omap_hsmmc.)
The following changes since commit e884656c2c0b2406b9bf99ea76f5a8c75128a331:
Merge git://www.denx.de/git/u-boot-imx (2017-09-20 12:32:34 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 8ff7763d62d09c541e398239b7e4e3a5e732d273:
regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1 (2017-09-22 23:23:54 +0900)
----------------------------------------------------------------
Jean-Jacques Hiblot (2):
dm: core: Add functions to get strings and the string count from a stringlist
regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1
Marek Vasut (5):
mmc: uniphier-sd: Factor out register IO
mmc: uniphier-sd: Add support for 64bit controller
mmc: uniphier-sd: Add support for 64bit FIFO
mmc: uniphier-sd: Add support for quirks
mmc: uniphier-sd: Add support for R8A7795 and R7A7796
drivers/core/read.c | 11 ++
drivers/mmc/Kconfig | 8 +-
drivers/mmc/uniphier-sd.c | 219 +++++++++++++++-------
drivers/power/regulator/Kconfig | 13 ++
drivers/power/regulator/Makefile | 1 +
drivers/power/regulator/pbias_regulator.c | 301 ++++++++++++++++++++++++++++++
include/dm/read.h | 36 ++++
7 files changed, 521 insertions(+), 68 deletions(-)
create mode 100644 drivers/power/regulator/pbias_regulator.c
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-09-25 5:31 ` Jaehoon Chung
@ 2017-09-26 12:17 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2017-09-26 12:17 UTC (permalink / raw)
To: u-boot
On Mon, Sep 25, 2017 at 02:31:03PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches into u-boot/master?
> If there is a problem, let me know, plz.
>
> Other patches needs to check more, so i didn't apply them.
> If i need to send PR again, i will send the PR as "take v2" for other patches.
> (Patches relevant to HS200 and omap_hsmmc.)
>
> The following changes since commit e884656c2c0b2406b9bf99ea76f5a8c75128a331:
>
> Merge git://www.denx.de/git/u-boot-imx (2017-09-20 12:32:34 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 8ff7763d62d09c541e398239b7e4e3a5e732d273:
>
> regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1 (2017-09-22 23:23:54 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170926/a56b35cc/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170818053954epcas1p232acd1af824a992adc6aaa44c1e7a907@epcas1p2.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170818053954epcas1p232acd1af824a992adc6aaa44c1e7a907@epcas1p2.samsung.com>
@ 2017-08-18 5:39 ` Jaehoon Chung
2017-08-18 6:35 ` Jaehoon Chung
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-08-18 5:39 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches to u-boot/master?
Sorry for late about reviewing patches.
Because of my late reviewing, some guys can't keep going their progress.
I had tested the buildman about all..As i see, there is no issue.
If there is any issue, let me know, plz.
The following changes since commit 2d3c4ae350fe8c196698681ab9410733bf9017e0:
Prepare v2017.09-rc2 (2017-08-14 20:02:11 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to b441a8ac51f8f628c0ae6efbf58f464464332c1d:
mmc: Support generic PCI SD host controller (2017-08-18 14:18:23 +0900)
----------------------------------------------------------------
Angelo Dureghello (1):
cmd: mmc: add mmc partconf read capability
Bin Meng (1):
mmc: Support generic PCI SD host controller
Jean-Jacques Hiblot (1):
regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1
Marek Vasut (4):
mmc: uniphier-sd: Fix long response processing
mmc: sh_sdhi: Add DM and DT probing support
mmc: sh_sdhi: Fix the ACMD handling
mmc: sd_sdhi: Enable clock using clock framework
Simon Glass (40):
dm: core: Avoid calling dm_scan_fdt_dev() with of-platdata
dm: blk: Add a function to find an interface-type name
dm: blk: Add a generic function for block device commands
dm: sata: Adjust the 'sata' command to use blk_common_cmd()
dm: scsi: Adjust the 'scsi' command to use blk_common_cmd()
dm: ide: Adjust the 'ide' command to use blk_common_cmd()
dm: usb: Adjust the 'usb' command to use blk_common_cmd()
dm: blk: Update return value in blk_create_devicef()
dm: core: Add a comment about the device_remove() flags
dm: sata: dwc_ahsata: Make functions static
dm: sata: dw_sata: Drop dwc_ahsata_rw_ncq_cmd()
dm: sata: dw_sata: Move exported functions to the end
dm: sata: dw_sata: Rename 'probe_ent' to uc_priv
dm: sata: dw_sata: Drop unnecessary casts
dm: sata: dw_sata: Pass uc_priv to internal functions
dm: sata: dw_sata: Drop unnecessary brackets
dm: sata: dw_sata: Sort #include directives
dm: sata: dw_sata: Rename the dwc_ahsata private header
dm: sata: dw_sata: Drop is_ready
dm: sata: dw_sata: More ahci_init_one() futher down
dm: sata: dw_sata: Set up common versions of operations
dm: sata: Support driver model with the 'sata' command
dm: sata: imx: Allow driver model to be used for sata
dm: sata: Update the AHCI uclass to support operations
dm: sata: dwc_ahsata: Add support for driver model
dm: mmc: fsl_esdhc: Pass private data to internal functions
dm: mmc: fsl_esdhc: Set up common versions of operations
dm: mmc: fsl_esdhc: Detect reset failure
dm: mmc: fsl_esdhc: Detect init failure
dm: mmc: fsl_esdhc: Set up platform data
dm: mmc: fsl_esdhc: Drop mmc_init() call from fsl_esdhc_init()
dm: mmc: fsl_esdhc: Update to support livetree
dm: mmc: fsl_esdhc: Update to support MMC operations
dm: imx: cm_fx6: Support driver model for SATA
dm: imx: cm_fx6: Add device tree for cm_fx6
dm: imx: cm_fx6: Add MMC support for CONFIG_BLK
dm: imx: cm_fx6: Enable more driver model support
dm: imx: Move i.MX devices to use CONFIG_DM_MMC_OPS
dm: mmc: Correct Kconfig condition for SPL_DM_MMC_OPS
dm: mmc: Drop CONFIG_DM_MMC_OPS
Wenyou.Yang at microchip.com (1):
mmc: gen_atmel_mci: Fix wrong arguments used of bind()
arch/arm/Kconfig | 2 -
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx6q-cm-fx6.dts | 115 ++++
arch/arm/mach-imx/cpu.c | 2 +-
arch/arm/mach-rmobile/include/mach/sh_sdhi.h | 5 -
board/compulab/cm_fx6/cm_fx6.c | 80 +++
cmd/Makefile | 1 +
cmd/blk_common.c | 104 ++++
cmd/ide.c | 107 +---
cmd/mmc.c | 38 +-
cmd/sata.c | 178 +++---
cmd/scsi.c | 79 +--
cmd/usb.c | 111 +---
common/splash_source.c | 2 +-
configs/cm_fx6_defconfig | 8 +-
configs/imx6q_logic_defconfig | 1 -
configs/imx6qdl_icore_mmc_defconfig | 1 -
configs/imx6qdl_icore_rqs_defconfig | 1 -
configs/imx6ul_geam_mmc_defconfig | 1 -
configs/imx6ul_geam_nand_defconfig | 1 -
configs/imx6ul_isiot_emmc_defconfig | 1 -
configs/imx6ul_isiot_mmc_defconfig | 1 -
configs/imx6ul_isiot_nand_defconfig | 1 -
configs/ls1012aqds_qspi_defconfig | 1 -
configs/ls1012ardb_qspi_defconfig | 1 -
configs/mx6slevk_defconfig | 1 -
configs/mx6slevk_spinor_defconfig | 1 -
configs/mx6sllevk_defconfig | 1 -
configs/mx6sllevk_plugin_defconfig | 1 -
configs/mx6sxsabreauto_defconfig | 1 -
configs/mx6ull_14x14_evk_defconfig | 1 -
configs/mx6ull_14x14_evk_plugin_defconfig | 1 -
configs/mx7dsabresd_defconfig | 1 -
configs/mx7dsabresd_secure_defconfig | 1 -
configs/mx7ulp_evk_defconfig | 1 -
configs/mx7ulp_evk_plugin_defconfig | 1 -
configs/opos6uldev_defconfig | 1 -
drivers/ata/dwc_ahsata.c | 797 +++++++++++++-----------
drivers/ata/{dwc_ahsata.h => dwc_ahsata_priv.h} | 6 +-
drivers/ata/sata.c | 37 ++
drivers/block/blk-uclass.c | 7 +-
drivers/block/blk_legacy.c | 7 +
drivers/core/syscon-uclass.c | 3 +
drivers/mmc/Kconfig | 40 +-
drivers/mmc/dw_mmc.c | 8 +-
drivers/mmc/fsl_esdhc.c | 261 +++++---
drivers/mmc/gen_atmel_mci.c | 64 +-
drivers/mmc/mmc-uclass.c | 4 -
drivers/mmc/mmc.c | 12 +-
drivers/mmc/mmc_boot.c | 17 +-
drivers/mmc/mmc_legacy.c | 2 +-
drivers/mmc/pci_mmc.c | 7 +-
drivers/mmc/sdhci.c | 8 +-
drivers/mmc/sh_sdhi.c | 283 +++++++--
drivers/mmc/uniphier-sd.c | 14 +-
drivers/power/regulator/Kconfig | 13 +
drivers/power/regulator/Makefile | 1 +
drivers/power/regulator/pbias_regulator.c | 302 +++++++++
include/ahci.h | 54 ++
include/blk.h | 20 +
include/configs/am335x_evm.h | 1 -
include/configs/am335x_shc.h | 1 -
include/configs/chiliboard.h | 1 -
include/configs/omap3_logic.h | 1 -
include/dm/device-internal.h | 2 +-
include/dwc_ahsata.h | 16 +
include/dwmmc.h | 2 +-
include/mmc.h | 10 +-
include/sata.h | 5 +-
include/sdhci.h | 2 +-
70 files changed, 1827 insertions(+), 1036 deletions(-)
create mode 100644 arch/arm/dts/imx6q-cm-fx6.dts
create mode 100644 cmd/blk_common.c
rename drivers/ata/{dwc_ahsata.h => dwc_ahsata_priv.h} (99%)
create mode 100644 drivers/power/regulator/pbias_regulator.c
create mode 100644 include/dwc_ahsata.h
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-08-18 5:39 ` Jaehoon Chung
@ 2017-08-18 6:35 ` Jaehoon Chung
0 siblings, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-08-18 6:35 UTC (permalink / raw)
To: u-boot
Dear Tom,
I will resend the PR. Discard this PR.
Best Regards,
Jaehoon Chung
On 08/18/2017 02:39 PM, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> Sorry for late about reviewing patches.
> Because of my late reviewing, some guys can't keep going their progress.
>
> I had tested the buildman about all..As i see, there is no issue.
> If there is any issue, let me know, plz.
>
> The following changes since commit 2d3c4ae350fe8c196698681ab9410733bf9017e0:
>
> Prepare v2017.09-rc2 (2017-08-14 20:02:11 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to b441a8ac51f8f628c0ae6efbf58f464464332c1d:
>
> mmc: Support generic PCI SD host controller (2017-08-18 14:18:23 +0900)
>
> ----------------------------------------------------------------
> Angelo Dureghello (1):
> cmd: mmc: add mmc partconf read capability
>
> Bin Meng (1):
> mmc: Support generic PCI SD host controller
>
> Jean-Jacques Hiblot (1):
> regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1
>
> Marek Vasut (4):
> mmc: uniphier-sd: Fix long response processing
> mmc: sh_sdhi: Add DM and DT probing support
> mmc: sh_sdhi: Fix the ACMD handling
> mmc: sd_sdhi: Enable clock using clock framework
>
> Simon Glass (40):
> dm: core: Avoid calling dm_scan_fdt_dev() with of-platdata
> dm: blk: Add a function to find an interface-type name
> dm: blk: Add a generic function for block device commands
> dm: sata: Adjust the 'sata' command to use blk_common_cmd()
> dm: scsi: Adjust the 'scsi' command to use blk_common_cmd()
> dm: ide: Adjust the 'ide' command to use blk_common_cmd()
> dm: usb: Adjust the 'usb' command to use blk_common_cmd()
> dm: blk: Update return value in blk_create_devicef()
> dm: core: Add a comment about the device_remove() flags
> dm: sata: dwc_ahsata: Make functions static
> dm: sata: dw_sata: Drop dwc_ahsata_rw_ncq_cmd()
> dm: sata: dw_sata: Move exported functions to the end
> dm: sata: dw_sata: Rename 'probe_ent' to uc_priv
> dm: sata: dw_sata: Drop unnecessary casts
> dm: sata: dw_sata: Pass uc_priv to internal functions
> dm: sata: dw_sata: Drop unnecessary brackets
> dm: sata: dw_sata: Sort #include directives
> dm: sata: dw_sata: Rename the dwc_ahsata private header
> dm: sata: dw_sata: Drop is_ready
> dm: sata: dw_sata: More ahci_init_one() futher down
> dm: sata: dw_sata: Set up common versions of operations
> dm: sata: Support driver model with the 'sata' command
> dm: sata: imx: Allow driver model to be used for sata
> dm: sata: Update the AHCI uclass to support operations
> dm: sata: dwc_ahsata: Add support for driver model
> dm: mmc: fsl_esdhc: Pass private data to internal functions
> dm: mmc: fsl_esdhc: Set up common versions of operations
> dm: mmc: fsl_esdhc: Detect reset failure
> dm: mmc: fsl_esdhc: Detect init failure
> dm: mmc: fsl_esdhc: Set up platform data
> dm: mmc: fsl_esdhc: Drop mmc_init() call from fsl_esdhc_init()
> dm: mmc: fsl_esdhc: Update to support livetree
> dm: mmc: fsl_esdhc: Update to support MMC operations
> dm: imx: cm_fx6: Support driver model for SATA
> dm: imx: cm_fx6: Add device tree for cm_fx6
> dm: imx: cm_fx6: Add MMC support for CONFIG_BLK
> dm: imx: cm_fx6: Enable more driver model support
> dm: imx: Move i.MX devices to use CONFIG_DM_MMC_OPS
> dm: mmc: Correct Kconfig condition for SPL_DM_MMC_OPS
> dm: mmc: Drop CONFIG_DM_MMC_OPS
>
> Wenyou.Yang at microchip.com (1):
> mmc: gen_atmel_mci: Fix wrong arguments used of bind()
>
> arch/arm/Kconfig | 2 -
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/imx6q-cm-fx6.dts | 115 ++++
> arch/arm/mach-imx/cpu.c | 2 +-
> arch/arm/mach-rmobile/include/mach/sh_sdhi.h | 5 -
> board/compulab/cm_fx6/cm_fx6.c | 80 +++
> cmd/Makefile | 1 +
> cmd/blk_common.c | 104 ++++
> cmd/ide.c | 107 +---
> cmd/mmc.c | 38 +-
> cmd/sata.c | 178 +++---
> cmd/scsi.c | 79 +--
> cmd/usb.c | 111 +---
> common/splash_source.c | 2 +-
> configs/cm_fx6_defconfig | 8 +-
> configs/imx6q_logic_defconfig | 1 -
> configs/imx6qdl_icore_mmc_defconfig | 1 -
> configs/imx6qdl_icore_rqs_defconfig | 1 -
> configs/imx6ul_geam_mmc_defconfig | 1 -
> configs/imx6ul_geam_nand_defconfig | 1 -
> configs/imx6ul_isiot_emmc_defconfig | 1 -
> configs/imx6ul_isiot_mmc_defconfig | 1 -
> configs/imx6ul_isiot_nand_defconfig | 1 -
> configs/ls1012aqds_qspi_defconfig | 1 -
> configs/ls1012ardb_qspi_defconfig | 1 -
> configs/mx6slevk_defconfig | 1 -
> configs/mx6slevk_spinor_defconfig | 1 -
> configs/mx6sllevk_defconfig | 1 -
> configs/mx6sllevk_plugin_defconfig | 1 -
> configs/mx6sxsabreauto_defconfig | 1 -
> configs/mx6ull_14x14_evk_defconfig | 1 -
> configs/mx6ull_14x14_evk_plugin_defconfig | 1 -
> configs/mx7dsabresd_defconfig | 1 -
> configs/mx7dsabresd_secure_defconfig | 1 -
> configs/mx7ulp_evk_defconfig | 1 -
> configs/mx7ulp_evk_plugin_defconfig | 1 -
> configs/opos6uldev_defconfig | 1 -
> drivers/ata/dwc_ahsata.c | 797 +++++++++++++-----------
> drivers/ata/{dwc_ahsata.h => dwc_ahsata_priv.h} | 6 +-
> drivers/ata/sata.c | 37 ++
> drivers/block/blk-uclass.c | 7 +-
> drivers/block/blk_legacy.c | 7 +
> drivers/core/syscon-uclass.c | 3 +
> drivers/mmc/Kconfig | 40 +-
> drivers/mmc/dw_mmc.c | 8 +-
> drivers/mmc/fsl_esdhc.c | 261 +++++---
> drivers/mmc/gen_atmel_mci.c | 64 +-
> drivers/mmc/mmc-uclass.c | 4 -
> drivers/mmc/mmc.c | 12 +-
> drivers/mmc/mmc_boot.c | 17 +-
> drivers/mmc/mmc_legacy.c | 2 +-
> drivers/mmc/pci_mmc.c | 7 +-
> drivers/mmc/sdhci.c | 8 +-
> drivers/mmc/sh_sdhi.c | 283 +++++++--
> drivers/mmc/uniphier-sd.c | 14 +-
> drivers/power/regulator/Kconfig | 13 +
> drivers/power/regulator/Makefile | 1 +
> drivers/power/regulator/pbias_regulator.c | 302 +++++++++
> include/ahci.h | 54 ++
> include/blk.h | 20 +
> include/configs/am335x_evm.h | 1 -
> include/configs/am335x_shc.h | 1 -
> include/configs/chiliboard.h | 1 -
> include/configs/omap3_logic.h | 1 -
> include/dm/device-internal.h | 2 +-
> include/dwc_ahsata.h | 16 +
> include/dwmmc.h | 2 +-
> include/mmc.h | 10 +-
> include/sata.h | 5 +-
> include/sdhci.h | 2 +-
> 70 files changed, 1827 insertions(+), 1036 deletions(-)
> create mode 100644 arch/arm/dts/imx6q-cm-fx6.dts
> create mode 100644 cmd/blk_common.c
> rename drivers/ata/{dwc_ahsata.h => dwc_ahsata_priv.h} (99%)
> create mode 100644 drivers/power/regulator/pbias_regulator.c
> create mode 100644 include/dwc_ahsata.h
>
> Best Regards,
> Jaehoon Chung
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170731025907epcas1p1fb9b643ec83cc77b12ab0d8550755be7@epcas1p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170731025907epcas1p1fb9b643ec83cc77b12ab0d8550755be7@epcas1p1.samsung.com>
@ 2017-07-31 2:59 ` Jaehoon Chung
2017-07-31 11:27 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-07-31 2:59 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches into u-boot/master?
The following changes since commit 55f228b07e2d84938a88737445441e736de41340:
x86: minnowmax: Remove CONFIG_SMSC_LPC47M (2017-07-30 10:30:25 +0800)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 9b32160db8264d32f5b0640412c9cb1b882c1d6e:
dm: syscon: scan sub-nodes of the syscon node (2017-07-31 11:49:18 +0900)
----------------------------------------------------------------
Jean-Jacques Hiblot (4):
regulator: palmas: disable bypass when the LDO is enabled
dm: core: Add functions to get strings and the string count from a stringlist
regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1
dm: syscon: scan sub-nodes of the syscon node
Kishon Vijay Abraham I (1):
regulator: palmas: Add support for LDO1 regulator to provide 1.8V
Simon Glass (14):
ahci: Support non-PCI controllers
dm: mmc: Allow disabling driver model in SPL
fdt: Correct fdt_get_base_address()
dm: scsi: Drop duplicate SCSI and DM_SCSI options
dm: ahci: Correct uclass private data
dm: mmc: sunxi: Rename struct sunxi_mmc_host to sunxi_mmc_priv
dm: mmc: sunxi: Rename mmchost to priv
dm: mmc: sunxi: Pass private data around explicitly
dm: mmc: sunxi: Drop mmc_clk_io_on()
dm: mmc: sunxi: Add support for driver model
dm: sunxi: Linksprite_pcDuino3: Correct polarity of MMC card detect
dm: sunxi: sata: Don't build sata support into SPL
dm: sata: sunxi: Add support for driver model
dm: sunxi: Move Linksprite_pcDuino3 to use DM for MMC, SATA
arch/arm/dts/sun7i-a20-pcduino3.dts | 2 +-
arch/x86/cpu/ivybridge/sata.c | 2 +-
board/sunxi/Makefile | 2 +
board/sunxi/ahci.c | 61 ++++-
common/fdt_support.c | 7 +-
common/spl/spl_mmc.c | 4 +-
configs/Linksprite_pcDuino3_defconfig | 7 +-
drivers/ata/Kconfig | 18 --
drivers/ata/ahci-uclass.c | 2 +
drivers/ata/ahci.c | 28 ++-
drivers/block/Kconfig | 12 +
drivers/block/Makefile | 4 +-
drivers/core/read.c | 11 +
drivers/core/syscon-uclass.c | 1 +
drivers/mmc/Kconfig | 22 ++
drivers/mmc/Makefile | 4 +-
drivers/mmc/mmc-uclass.c | 6 +-
drivers/mmc/mmc.c | 28 +--
drivers/mmc/mmc_legacy.c | 2 +-
drivers/mmc/mmc_private.h | 6 +-
drivers/mmc/omap_hsmmc.c | 20 +-
drivers/mmc/sunxi_mmc.c | 359 ++++++++++++++++++++---------
drivers/power/palmas.c | 5 +-
drivers/power/regulator/Kconfig | 10 +
drivers/power/regulator/Makefile | 1 +
drivers/power/regulator/palmas_regulator.c | 36 +++
drivers/power/regulator/pbias_regulator.c | 302 ++++++++++++++++++++++++
drivers/scsi/scsi.c | 2 +-
include/ahci.h | 14 +-
include/blk.h | 4 +-
include/dm/read.h | 36 +++
include/mmc.h | 12 +-
include/power/palmas.h | 1 +
33 files changed, 832 insertions(+), 199 deletions(-)
create mode 100644 drivers/power/regulator/pbias_regulator.c
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-07-31 2:59 ` Jaehoon Chung
@ 2017-07-31 11:27 ` Tom Rini
2017-08-01 2:48 ` Jaehoon Chung
0 siblings, 1 reply; 71+ messages in thread
From: Tom Rini @ 2017-07-31 11:27 UTC (permalink / raw)
To: u-boot
On Mon, Jul 31, 2017 at 11:59:07AM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches into u-boot/master?
>
> The following changes since commit 55f228b07e2d84938a88737445441e736de41340:
>
> x86: minnowmax: Remove CONFIG_SMSC_LPC47M (2017-07-30 10:30:25 +0800)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 9b32160db8264d32f5b0640412c9cb1b882c1d6e:
>
> dm: syscon: scan sub-nodes of the syscon node (2017-07-31 11:49:18 +0900)
>
This fails with at least:
arm: + am57xx_hs_evm
+(am57xx_hs_evm) drivers/power/regulator/built-in.o: In function `pbias_write':
+(am57xx_hs_evm) build/../drivers/power/regulator/pbias_regulator.c:49: undefined reference to `regmap_write'
+(am57xx_hs_evm) drivers/power/regulator/built-in.o: In function `pbias_read':
+(am57xx_hs_evm) build/../drivers/power/regulator/pbias_regulator.c:59: undefined reference to `regmap_read'
+(am57xx_hs_evm) drivers/power/regulator/built-in.o: In function `pbias_ofdata_to_platdata':
+(am57xx_hs_evm) build/../drivers/power/regulator/pbias_regulator.c:78: undefined reference to `syscon_get_regmap'
+(am57xx_hs_evm) arm-linux-gnueabihf-ld.bfd: BFD (GNU Binutils for Debian) 2.28 assertion fail ../../bfd/elf32-arm.c:9514
+(am57xx_hs_evm) make[1]: *** [u-boot] Error 1
+(am57xx_hs_evm) make: *** [sub-make] Error 2
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170731/bda57c83/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-07-31 11:27 ` Tom Rini
@ 2017-08-01 2:48 ` Jaehoon Chung
0 siblings, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-08-01 2:48 UTC (permalink / raw)
To: u-boot
Dear Tom,
On 07/31/2017 08:27 PM, Tom Rini wrote:
> On Mon, Jul 31, 2017 at 11:59:07AM +0900, Jaehoon Chung wrote:
>
>> Dear Tom,
>>
>> Could you pull these patches into u-boot/master?
>>
>> The following changes since commit 55f228b07e2d84938a88737445441e736de41340:
>>
>> x86: minnowmax: Remove CONFIG_SMSC_LPC47M (2017-07-30 10:30:25 +0800)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-mmc.git master
>>
>> for you to fetch changes up to 9b32160db8264d32f5b0640412c9cb1b882c1d6e:
>>
>> dm: syscon: scan sub-nodes of the syscon node (2017-07-31 11:49:18 +0900)
>>
>
> This fails with at least:
> arm: + am57xx_hs_evm
> +(am57xx_hs_evm) drivers/power/regulator/built-in.o: In function `pbias_write':
> +(am57xx_hs_evm) build/../drivers/power/regulator/pbias_regulator.c:49: undefined reference to `regmap_write'
> +(am57xx_hs_evm) drivers/power/regulator/built-in.o: In function `pbias_read':
> +(am57xx_hs_evm) build/../drivers/power/regulator/pbias_regulator.c:59: undefined reference to `regmap_read'
> +(am57xx_hs_evm) drivers/power/regulator/built-in.o: In function `pbias_ofdata_to_platdata':
> +(am57xx_hs_evm) build/../drivers/power/regulator/pbias_regulator.c:78: undefined reference to `syscon_get_regmap'
> +(am57xx_hs_evm) arm-linux-gnueabihf-ld.bfd: BFD (GNU Binutils for Debian) 2.28 assertion fail ../../bfd/elf32-arm.c:9514
> +(am57xx_hs_evm) make[1]: *** [u-boot] Error 1
> +(am57xx_hs_evm) make: *** [sub-make] Error 2
after fixing it, resend the PR. Sorry for bothering you.
>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170719101711epcas5p1e73a75ea548997594e3f5ba23da0e565@epcas5p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170719101711epcas5p1e73a75ea548997594e3f5ba23da0e565@epcas5p1.samsung.com>
@ 2017-07-19 10:17 ` Jaehoon Chung
2017-07-21 15:48 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-07-19 10:17 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could pull these patches into your u-boot/master?
After that, i will send PR take2....now i'm checking other pending review patches..
The following changes since commit 2710d54f54bb2242e81a23930b4e954654800d1f:
ARM: Mark AE boards orphan (2017-07-18 15:21:30 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to aae6f016a7928edc79dff78d1235103fff282a34:
mmc: cadence: use fdt32_t for DT property value to fix sparse warning (2017-07-19 19:13:59 +0900)
----------------------------------------------------------------
Keerthy (12):
regulator: Change get_enable return type to integer from bool
power: regulator: fixed: get_enable should return integer
power: regulator: act8846: get_enable should return integer
power: regulator: max77686: get_enable should return integer
power: regulator: palmas: get_enable should return integer
power: regulator: pfuze100: get_enable should return integer
power: regulator: tps65090: get_enable should return integer
power: regulator: rk8xx: get_enable should return integer
power: sandbox: fixed: get_enable should return integer
power: regulator: s5m8767: get_enable should return integer
power: regulator: lp873x: get_enable should return integer
power: regulator: lp87565: get_enable should return integer
Kever Yang (2):
mmc: use new hwpart API when CONFIG_BLK enabled
mmc: rpmb: update size format for write_counter
Masahiro Yamada (2):
mmc: add static to spl_mmc_get_device_index()
mmc: cadence: use fdt32_t for DT property value to fix sparse warning
cmd/mmc.c | 4 ++++
common/spl/spl_mmc.c | 2 +-
drivers/mmc/rpmb.c | 2 +-
drivers/mmc/sdhci-cadence.c | 2 +-
drivers/power/regulator/act8846.c | 2 +-
drivers/power/regulator/fixed.c | 2 +-
drivers/power/regulator/lp873x_regulator.c | 4 ++--
drivers/power/regulator/lp87565_regulator.c | 2 +-
drivers/power/regulator/max77686.c | 4 ++--
drivers/power/regulator/palmas_regulator.c | 4 ++--
drivers/power/regulator/pfuze100.c | 2 +-
drivers/power/regulator/regulator-uclass.c | 2 +-
drivers/power/regulator/rk8xx.c | 6 +++---
drivers/power/regulator/s5m8767.c | 4 ++--
drivers/power/regulator/sandbox.c | 4 ++--
drivers/power/regulator/tps65090_regulator.c | 2 +-
include/power/regulator.h | 8 ++++----
17 files changed, 30 insertions(+), 26 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-07-19 10:17 ` Jaehoon Chung
@ 2017-07-21 15:48 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2017-07-21 15:48 UTC (permalink / raw)
To: u-boot
On Wed, Jul 19, 2017 at 07:17:10PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could pull these patches into your u-boot/master?
> After that, i will send PR take2....now i'm checking other pending review patches..
>
> The following changes since commit 2710d54f54bb2242e81a23930b4e954654800d1f:
>
> ARM: Mark AE boards orphan (2017-07-18 15:21:30 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to aae6f016a7928edc79dff78d1235103fff282a34:
>
> mmc: cadence: use fdt32_t for DT property value to fix sparse warning (2017-07-19 19:13:59 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170721/c07f4f7c/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170630034821epcas1p193104bec121303c6897391e690a943f3@epcas1p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170630034821epcas1p193104bec121303c6897391e690a943f3@epcas1p1.samsung.com>
@ 2017-06-30 3:48 ` Jaehoon Chung
2017-06-30 10:48 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-06-30 3:48 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches into u-boot/master?
If there is a problem, let me know, plz.
The following changes since commit 08546df976b79b1694af3ff12b26baf2931f371a:
Merge git://git.denx.de/u-boot-x86 (2017-06-27 09:33:10 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 34c529a6267a784dc92466909616cd4e03e3f205:
mmc: cadence: use fdt32_t for DT property value to fix sparse warning (2017-06-30 12:22:06 +0900)
----------------------------------------------------------------
Keerthy (12):
regulator: Change get_enable return type to integer from bool
power: regulator: fixed: get_enable should return integer
power: regulator: act8846: get_enable should return integer
power: regulator: max77686: get_enable should return integer
power: regulator: palmas: get_enable should return integer
power: regulator: pfuze100: get_enable should return integer
power: regulator: tps65090: get_enable should return integer
power: regulator: rk8xx: get_enable should return integer
power: sandbox: fixed: get_enable should return integer
power: regulator: s5m8767: get_enable should return integer
power: regulator: lp873x: get_enable should return integer
power: regulator: lp87565: get_enable should return integer
Kever Yang (2):
mmc: use new hwpart API when CONFIG_BLK enabled
mmc: rpmb: update size format for write_counter
Masahiro Yamada (2):
mmc: add static to spl_mmc_get_device_index()
mmc: cadence: use fdt32_t for DT property value to fix sparse warning
cmd/mmc.c | 4 ++++
common/spl/spl_mmc.c | 2 +-
drivers/mmc/rpmb.c | 2 +-
drivers/mmc/sdhci-cadence.c | 2 +-
drivers/power/regulator/act8846.c | 2 +-
drivers/power/regulator/fixed.c | 2 +-
drivers/power/regulator/lp873x_regulator.c | 4 ++--
drivers/power/regulator/lp87565_regulator.c | 2 +-
drivers/power/regulator/max77686.c | 4 ++--
drivers/power/regulator/palmas_regulator.c | 4 ++--
drivers/power/regulator/pfuze100.c | 2 +-
drivers/power/regulator/regulator-uclass.c | 2 +-
drivers/power/regulator/rk8xx.c | 6 +++---
drivers/power/regulator/s5m8767.c | 4 ++--
drivers/power/regulator/sandbox.c | 4 ++--
drivers/power/regulator/tps65090_regulator.c | 2 +-
include/power/regulator.h | 8 ++++----
17 files changed, 30 insertions(+), 26 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-06-30 3:48 ` Jaehoon Chung
@ 2017-06-30 10:48 ` Tom Rini
2017-06-30 11:59 ` Jaehoon Chung
0 siblings, 1 reply; 71+ messages in thread
From: Tom Rini @ 2017-06-30 10:48 UTC (permalink / raw)
To: u-boot
On Fri, Jun 30, 2017 at 12:48:20PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches into u-boot/master?
> If there is a problem, let me know, plz.
>
> The following changes since commit 08546df976b79b1694af3ff12b26baf2931f371a:
>
> Merge git://git.denx.de/u-boot-x86 (2017-06-27 09:33:10 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 34c529a6267a784dc92466909616cd4e03e3f205:
>
> mmc: cadence: use fdt32_t for DT property value to fix sparse warning (2017-06-30 12:22:06 +0900)
Since -rc3 is coming Monday, is there anything here that's just a
bugfix? Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170630/99cab581/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-06-30 10:48 ` Tom Rini
@ 2017-06-30 11:59 ` Jaehoon Chung
0 siblings, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-06-30 11:59 UTC (permalink / raw)
To: u-boot
Hi Tom,
On 06/30/2017 07:48 PM, Tom Rini wrote:
> On Fri, Jun 30, 2017 at 12:48:20PM +0900, Jaehoon Chung wrote:
>
>> Dear Tom,
>>
>> Could you pull these patches into u-boot/master?
>> If there is a problem, let me know, plz.
>>
>> The following changes since commit 08546df976b79b1694af3ff12b26baf2931f371a:
>>
>> Merge git://git.denx.de/u-boot-x86 (2017-06-27 09:33:10 -0400)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-mmc.git master
>>
>> for you to fetch changes up to 34c529a6267a784dc92466909616cd4e03e3f205:
>>
>> mmc: cadence: use fdt32_t for DT property value to fix sparse warning (2017-06-30 12:22:06 +0900)
>
> Since -rc3 is coming Monday, is there anything here that's just a
> bugfix? Thanks!
There is no bugfix..then i will keep these patches in my repository until opening the next merge window.
Best Regards,
Jaehoon Chung
>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170609112846epcas1p1db6eece58f727344e6789e434afa09c9@epcas1p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170609112846epcas1p1db6eece58f727344e6789e434afa09c9@epcas1p1.samsung.com>
@ 2017-06-09 11:28 ` Jaehoon Chung
2017-06-10 22:00 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-06-09 11:28 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches into u-boot/master?
The following changes since commit 156d64fa55e9914b144c5e83f2a9e13d1223a4d3:
Merge git://git.denx.de/u-boot-rockchip (2017-06-08 12:14:11 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to abf54bf978ed9932d69ee7f937012398d0d8d08f:
Fixup bug in PMIC TPS65217 register address definition (2017-06-09 20:25:16 +0900)
----------------------------------------------------------------
Brock Zheng Techyauld Ltd (1):
Fixup bug in PMIC TPS65217 register address definition
Keerthy (5):
power: regulator: palmas: Add smps12 dual regulator for tps65917
power: pmic: tps65218: Add DCDC3 configuration
board: ti: AM43XX: Add ddr voltage rail configuration
power: pmic: lp87565: Add the basic pmic support
power: regulator: lp87565: add regulator support
Kouei Abe (4):
mmc: sh_sdhi: Set SD_INFOx interrupt mask before command starting
mmc: sh_sdhi: Add 64-bit access to sd_buf support
mmc: sh_sdhi: Add MMC version 5.0 support
mmc: sh_sdhi: Add SDHI support
Marek Vasut (1):
mmc: sh_sdhi: Fix Kconfig entry
Simon Glass (3):
dm: blk: Add a way to obtain a block device from its parent
dm: mmc: Ensure that block device is probed
dm: mmc: Avoid probing block devices in find_mmc_device()
arch/arm/mach-rmobile/include/mach/sh_sdhi.h | 15 +-
board/ti/am43xx/board.c | 7 +
common/env_mmc.c | 7 +-
drivers/block/blk-uclass.c | 26 ++++
drivers/mmc/Kconfig | 2 +-
drivers/mmc/mmc-uclass.c | 6 +-
drivers/mmc/sh_sdhi.c | 95 ++++++++++---
drivers/power/pmic/Kconfig | 7 +
drivers/power/pmic/Makefile | 1 +
drivers/power/pmic/lp87565.c | 87 ++++++++++++
drivers/power/pmic/pmic_tps65218.c | 3 +-
drivers/power/regulator/Kconfig | 10 ++
drivers/power/regulator/Makefile | 1 +
drivers/power/regulator/lp87565_regulator.c | 199 +++++++++++++++++++++++++++
drivers/power/regulator/palmas_regulator.c | 6 +-
include/blk.h | 7 +
include/power/lp87565.h | 12 ++
include/power/tps65217.h | 1 +
include/power/tps65218.h | 1 +
test/dm/blk.c | 18 +++
20 files changed, 484 insertions(+), 27 deletions(-)
create mode 100644 drivers/power/pmic/lp87565.c
create mode 100644 drivers/power/regulator/lp87565_regulator.c
create mode 100644 include/power/lp87565.h
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-06-09 11:28 ` Jaehoon Chung
@ 2017-06-10 22:00 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2017-06-10 22:00 UTC (permalink / raw)
To: u-boot
On Fri, Jun 09, 2017 at 08:28:46PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches into u-boot/master?
>
> The following changes since commit 156d64fa55e9914b144c5e83f2a9e13d1223a4d3:
>
> Merge git://git.denx.de/u-boot-rockchip (2017-06-08 12:14:11 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to abf54bf978ed9932d69ee7f937012398d0d8d08f:
>
> Fixup bug in PMIC TPS65217 register address definition (2017-06-09 20:25:16 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170610/ffb1aba0/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170529083151epcas5p1d26d3ff44c53bba61cc380bfd78a910f@epcas5p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170529083151epcas5p1d26d3ff44c53bba61cc380bfd78a910f@epcas5p1.samsung.com>
@ 2017-05-29 8:31 ` Jaehoon Chung
2017-05-31 2:06 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-05-29 8:31 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches into u-boot/master?
I have tested the buildman..but if there is a problem, let me know, plz.
The following changes since commit 380e86f361e4e2aef83295972863654fde157560:
Merge git://git.denx.de/u-boot-fsl-qoriq (2017-05-26 11:19:27 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to de59d10cd0a4e79c85e4f791fb8f023164d0890e:
doc: document u-boot, mmc-env-offset and u-boot, mmc-env-offset-redund (2017-05-29 17:28:52 +0900)
----------------------------------------------------------------
Heiner Kallweit (1):
mmc: meson: increase max block number per request
Keerthy (1):
power: pmic: tps65218: Fix tps65218_voltage_update function
Philipp Tomsich (2):
env_mmc: configure environment offsets via device tree
doc: document u-boot, mmc-env-offset and u-boot, mmc-env-offset-redund
Tom Rini (2):
mmc: Change 'part_config' to be a u8 not char.
drivers/power/regulator/max77686.c: Fix comparisons of unsigned expressions
common/env_mmc.c | 31 +++++++++++++++++++++++++++----
doc/device-tree-bindings/config.txt | 12 ++++++++++++
drivers/mmc/meson_gx_mmc.c | 2 +-
drivers/power/pmic/pmic_tps65218.c | 2 +-
drivers/power/regulator/max77686.c | 16 ++++++++--------
include/mmc.h | 2 +-
include/power/tps65218.h | 2 ++
7 files changed, 52 insertions(+), 15 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-05-29 8:31 ` Jaehoon Chung
@ 2017-05-31 2:06 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2017-05-31 2:06 UTC (permalink / raw)
To: u-boot
On Mon, May 29, 2017 at 05:31:50PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches into u-boot/master?
> I have tested the buildman..but if there is a problem, let me know, plz.
>
> The following changes since commit 380e86f361e4e2aef83295972863654fde157560:
>
> Merge git://git.denx.de/u-boot-fsl-qoriq (2017-05-26 11:19:27 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to de59d10cd0a4e79c85e4f791fb8f023164d0890e:
>
> doc: document u-boot, mmc-env-offset and u-boot, mmc-env-offset-redund (2017-05-29 17:28:52 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170530/7fb90e5c/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170515050639epcas1p3d4f0aca8a724070fbe556078835f2e61@epcas1p3.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170515050639epcas1p3d4f0aca8a724070fbe556078835f2e61@epcas1p3.samsung.com>
@ 2017-05-15 5:06 ` Jaehoon Chung
2017-05-15 6:18 ` Jaehoon Chung
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-05-15 5:06 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches into u-boot/master?
If there are problems, let me knows.
The following changes since commit 22f3368e71321db1e0e15dfbf54b052367890ec7:
Merge branch 'master' of git://git.denx.de/u-boot-mips (2017-05-13 16:45:35 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 08c424fc0073cfad854ebc6164a24c99f31aa125:
mmc: atmel_sdhci: Enable the quirk SDHCI_QUIRK_WAIT_SEND_CMD (2017-05-15 14:00:07 +0900)
----------------------------------------------------------------
Jean-Jacques Hiblot (2):
include: config: am335x: disable DM_MMC_OPS if DM_MMC is disabled
drivers: omap_hsmmc: move to DM_MMC_OPS
Masahiro Yamada (5):
mmc: sdhci-cadence: import updates from Linux 4.12
sandbox_noblk_defconfig: disable CONFIG_GENERIC_MMC
blanche_defconfig: enable CONFIG_MMC
mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC
mmc: descend into drivers/mmc only when CONFIG_MMC is enabled
Philipp Tomsich (2):
env_mmc: configure environment offsets via device tree
doc: document u-boot, mmc-env-offset and u-boot, mmc-env-offset-redund
Wenyou Yang (2):
mmc: sdhci: Fix maximum clock for programmable clock mode
mmc: atmel_sdhci: Enable the quirk SDHCI_QUIRK_WAIT_SEND_CMD
Makefile | 1 -
arch/arm/Kconfig | 2 +-
board/BuR/common/common.c | 2 +-
board/bosch/shc/board.c | 2 +-
board/compulab/cl-som-am57x/cl-som-am57x.c | 4 +-
board/compulab/cm_t35/cm_t35.c | 4 +-
board/compulab/cm_t3517/cm_t3517.c | 2 +-
board/compulab/cm_t54/cm_t54.c | 2 +-
board/corscience/tricorder/tricorder.c | 4 +-
board/gumstix/duovero/duovero.c | 2 +-
board/hisilicon/hikey/hikey.c | 2 +-
board/isee/igep00x0/igep00x0.c | 4 +-
board/logicpd/am3517evm/am3517evm.c | 2 +-
board/logicpd/omap3som/omap3logic.c | 4 +-
board/logicpd/zoom1/zoom1.c | 2 +-
board/overo/overo.c | 4 +-
board/pandora/pandora.c | 2 +-
board/quipos/cairo/cairo.c | 2 +-
board/samsung/arndale/arndale.c | 2 +-
board/samsung/common/board.c | 2 +-
board/samsung/common/misc.c | 4 +-
board/samsung/goni/goni.c | 2 +-
board/samsung/smdkv310/smdkv310.c | 2 +-
board/sunxi/board.c | 2 +-
board/technexion/tao3530/tao3530.c | 4 +-
board/ti/am3517crane/am3517crane.c | 2 +-
board/ti/am57xx/board.c | 2 +-
board/ti/beagle/beagle.c | 4 +-
board/ti/dra7xx/evm.c | 2 +-
board/ti/evm/evm.c | 4 +-
board/ti/ks2_evm/board_k2g.c | 2 +-
board/ti/omap5_uevm/evm.c | 2 +-
board/ti/panda/panda.c | 2 +-
board/ti/sdp4430/sdp.c | 2 +-
board/ti/ti814x/evm.c | 2 +-
board/timll/devkit8000/devkit8000.c | 4 +-
common/board_r.c | 4 +-
common/env_mmc.c | 31 ++++++++++++--
common/spl/Kconfig | 4 +-
configs/blanche_defconfig | 3 +-
configs/sandbox_noblk_defconfig | 1 -
doc/device-tree-bindings/config.txt | 12 ++++++
drivers/Makefile | 1 +
drivers/mmc/Kconfig | 5 +--
drivers/mmc/Makefile | 28 ++++++-------
drivers/mmc/atmel_sdhci.c | 4 +-
drivers/mmc/davinci_mmc.c | 2 +-
drivers/mmc/omap_hsmmc.c | 38 ++++++++++++++---
drivers/mmc/sdhci-cadence.c | 67 +++++++++++++++++++++++++-----
drivers/mmc/sdhci.c | 18 ++++----
include/configs/am335x_evm.h | 2 +
include/configs/am335x_shc.h | 1 +
include/configs/chiliboard.h | 1 +
53 files changed, 211 insertions(+), 104 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-05-15 5:06 ` Jaehoon Chung
@ 2017-05-15 6:18 ` Jaehoon Chung
0 siblings, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-05-15 6:18 UTC (permalink / raw)
To: u-boot
Dear Tom,
On 05/15/2017 02:06 PM, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches into u-boot/master?
> If there are problems, let me knows.
Discard this PR..When i checked some patches, there are problem..So i will resend the PR.
Best Regards,
Jaehoon Chung
>
>
> The following changes since commit 22f3368e71321db1e0e15dfbf54b052367890ec7:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mips (2017-05-13 16:45:35 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 08c424fc0073cfad854ebc6164a24c99f31aa125:
>
> mmc: atmel_sdhci: Enable the quirk SDHCI_QUIRK_WAIT_SEND_CMD (2017-05-15 14:00:07 +0900)
>
> ----------------------------------------------------------------
> Jean-Jacques Hiblot (2):
> include: config: am335x: disable DM_MMC_OPS if DM_MMC is disabled
> drivers: omap_hsmmc: move to DM_MMC_OPS
>
> Masahiro Yamada (5):
> mmc: sdhci-cadence: import updates from Linux 4.12
> sandbox_noblk_defconfig: disable CONFIG_GENERIC_MMC
> blanche_defconfig: enable CONFIG_MMC
> mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC
> mmc: descend into drivers/mmc only when CONFIG_MMC is enabled
>
> Philipp Tomsich (2):
> env_mmc: configure environment offsets via device tree
> doc: document u-boot, mmc-env-offset and u-boot, mmc-env-offset-redund
>
> Wenyou Yang (2):
> mmc: sdhci: Fix maximum clock for programmable clock mode
> mmc: atmel_sdhci: Enable the quirk SDHCI_QUIRK_WAIT_SEND_CMD
>
> Makefile | 1 -
> arch/arm/Kconfig | 2 +-
> board/BuR/common/common.c | 2 +-
> board/bosch/shc/board.c | 2 +-
> board/compulab/cl-som-am57x/cl-som-am57x.c | 4 +-
> board/compulab/cm_t35/cm_t35.c | 4 +-
> board/compulab/cm_t3517/cm_t3517.c | 2 +-
> board/compulab/cm_t54/cm_t54.c | 2 +-
> board/corscience/tricorder/tricorder.c | 4 +-
> board/gumstix/duovero/duovero.c | 2 +-
> board/hisilicon/hikey/hikey.c | 2 +-
> board/isee/igep00x0/igep00x0.c | 4 +-
> board/logicpd/am3517evm/am3517evm.c | 2 +-
> board/logicpd/omap3som/omap3logic.c | 4 +-
> board/logicpd/zoom1/zoom1.c | 2 +-
> board/overo/overo.c | 4 +-
> board/pandora/pandora.c | 2 +-
> board/quipos/cairo/cairo.c | 2 +-
> board/samsung/arndale/arndale.c | 2 +-
> board/samsung/common/board.c | 2 +-
> board/samsung/common/misc.c | 4 +-
> board/samsung/goni/goni.c | 2 +-
> board/samsung/smdkv310/smdkv310.c | 2 +-
> board/sunxi/board.c | 2 +-
> board/technexion/tao3530/tao3530.c | 4 +-
> board/ti/am3517crane/am3517crane.c | 2 +-
> board/ti/am57xx/board.c | 2 +-
> board/ti/beagle/beagle.c | 4 +-
> board/ti/dra7xx/evm.c | 2 +-
> board/ti/evm/evm.c | 4 +-
> board/ti/ks2_evm/board_k2g.c | 2 +-
> board/ti/omap5_uevm/evm.c | 2 +-
> board/ti/panda/panda.c | 2 +-
> board/ti/sdp4430/sdp.c | 2 +-
> board/ti/ti814x/evm.c | 2 +-
> board/timll/devkit8000/devkit8000.c | 4 +-
> common/board_r.c | 4 +-
> common/env_mmc.c | 31 ++++++++++++--
> common/spl/Kconfig | 4 +-
> configs/blanche_defconfig | 3 +-
> configs/sandbox_noblk_defconfig | 1 -
> doc/device-tree-bindings/config.txt | 12 ++++++
> drivers/Makefile | 1 +
> drivers/mmc/Kconfig | 5 +--
> drivers/mmc/Makefile | 28 ++++++-------
> drivers/mmc/atmel_sdhci.c | 4 +-
> drivers/mmc/davinci_mmc.c | 2 +-
> drivers/mmc/omap_hsmmc.c | 38 ++++++++++++++---
> drivers/mmc/sdhci-cadence.c | 67 +++++++++++++++++++++++++-----
> drivers/mmc/sdhci.c | 18 ++++----
> include/configs/am335x_evm.h | 2 +
> include/configs/am335x_shc.h | 1 +
> include/configs/chiliboard.h | 1 +
> 53 files changed, 211 insertions(+), 104 deletions(-)
>
> Best Regards,
> Jaehoon Chung
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170414065148epcas5p1f02fb69f9925f4b4a7bf176a76e447f7@epcas5p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170414065148epcas5p1f02fb69f9925f4b4a7bf176a76e447f7@epcas5p1.samsung.com>
@ 2017-04-14 6:51 ` Jaehoon Chung
2017-04-14 21:09 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-04-14 6:51 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches into u-boot/master?
The following changes since commit 40a808f173008729a0c631ab84693b6a2b0dcfc9:
ARCv2: SLC: Make sure busy bit is set properly on SLC flushing (2017-04-11 17:54:31 +0300)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 7dde50d70787eb2faeced82d0c025762b12363ea:
mmc: sdhci: Wait for SDHCI_INT_DATA_END when transferring. (2017-04-14 15:23:14 +0900)
----------------------------------------------------------------
Alex Deymo (1):
mmc: sdhci: Wait for SDHCI_INT_DATA_END when transferring.
Carlo Caione (1):
mmc: meson: add MMC driver for Meson GX (S905)
Heiner Kallweit (2):
arm: dts: update Meson GXBB / Odroid-C2 DT with recent Linux version
odroid-c2: enable new Meson GX MMC driver in board defconfig
Jocelyn Bohr (1):
mmc: bcm2835_sdhci: Speed up mmc writes.
Wenyou Yang (1):
mmc: gen_atmel_mci: add driver model support for mci
arch/arm/dts/meson-gx.dtsi | 447 +++++++++++++++++++
arch/arm/dts/meson-gxbb-odroidc2.dts | 147 +++++-
arch/arm/dts/meson-gxbb.dtsi | 718 ++++++++++++++++++------------
arch/arm/include/asm/arch-meson/sd_emmc.h | 89 ++++
configs/odroid-c2_defconfig | 5 +-
drivers/mmc/Kconfig | 15 +
drivers/mmc/Makefile | 1 +
drivers/mmc/bcm2835_sdhci.c | 8 +-
drivers/mmc/gen_atmel_mci.c | 158 ++++++-
drivers/mmc/meson_gx_mmc.c | 291 ++++++++++++
drivers/mmc/sdhci.c | 15 +-
include/dt-bindings/clock/gxbb-aoclkc.h | 66 +++
include/dt-bindings/clock/gxbb-clkc.h | 34 ++
include/dt-bindings/reset/gxbb-aoclkc.h | 66 +++
14 files changed, 1777 insertions(+), 283 deletions(-)
create mode 100644 arch/arm/dts/meson-gx.dtsi
create mode 100644 arch/arm/include/asm/arch-meson/sd_emmc.h
create mode 100644 drivers/mmc/meson_gx_mmc.c
create mode 100644 include/dt-bindings/clock/gxbb-aoclkc.h
create mode 100644 include/dt-bindings/clock/gxbb-clkc.h
create mode 100644 include/dt-bindings/reset/gxbb-aoclkc.h
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-04-14 6:51 ` Jaehoon Chung
@ 2017-04-14 21:09 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2017-04-14 21:09 UTC (permalink / raw)
To: u-boot
On Fri, Apr 14, 2017 at 03:51:48PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches into u-boot/master?
>
> The following changes since commit 40a808f173008729a0c631ab84693b6a2b0dcfc9:
>
> ARCv2: SLC: Make sure busy bit is set properly on SLC flushing (2017-04-11 17:54:31 +0300)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 7dde50d70787eb2faeced82d0c025762b12363ea:
>
> mmc: sdhci: Wait for SDHCI_INT_DATA_END when transferring. (2017-04-14 15:23:14 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170414/f73f885d/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170330052139epcas5p1e95ad9a80664dd907de79e6c2ad05763@epcas5p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170330052139epcas5p1e95ad9a80664dd907de79e6c2ad05763@epcas5p1.samsung.com>
@ 2017-03-30 5:21 ` Jaehoon Chung
2017-04-04 20:00 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-03-30 5:21 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could pull these patches into u-boot/master?
The following changes since commit 5cf618ee60a752d058a767372ca1ecb8d9c09b16:
Merge git://git.denx.de/u-boot-arc (2017-03-24 08:19:30 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 17c9a1c121e7d78d820fdb4f7ca070f53e23c29a:
mmc: omap_hsmmc: add support for CONFIG_BLK (2017-03-30 14:19:58 +0900)
----------------------------------------------------------------
Jean-Jacques Hiblot (4):
mmc: omap_hsmmc: use an accessor to get the private data
mmc: omap_hsmmc: use mmc_get_blk_desc() to get the block device desc
mmc: omap_hsmmc: move the mmc_config to platdata when DM_MMC is used
mmc: omap_hsmmc: add support for CONFIG_BLK
drivers/mmc/omap_hsmmc.c | 100 ++++++++++++++++++++++++++++++++++-------------
1 file changed, 73 insertions(+), 27 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-03-30 5:21 ` Jaehoon Chung
@ 2017-04-04 20:00 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2017-04-04 20:00 UTC (permalink / raw)
To: u-boot
On Thu, Mar 30, 2017 at 02:21:39PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could pull these patches into u-boot/master?
>
> The following changes since commit 5cf618ee60a752d058a767372ca1ecb8d9c09b16:
>
> Merge git://git.denx.de/u-boot-arc (2017-03-24 08:19:30 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to 17c9a1c121e7d78d820fdb4f7ca070f53e23c29a:
>
> mmc: omap_hsmmc: add support for CONFIG_BLK (2017-03-30 14:19:58 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170404/8645436c/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170321121100epcas5p19374186df9de3d740bceb6ba2d97f8c3@epcas5p1.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170321121100epcas5p19374186df9de3d740bceb6ba2d97f8c3@epcas5p1.samsung.com>
@ 2017-03-21 12:11 ` Jaehoon Chung
2017-03-22 0:51 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-03-21 12:11 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches into your master branch?
The following changes since commit d5abcf94c7123167725fc22ace342f0d455093c1:
ti: boot: Register the MMC controllers in SPL in the same way as in u-boot (2017-03-19 22:17:14 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to de0359c21e7993f7cf39156932fb73d171b2450a:
mmc: xenon_sdhci: Add missing host->max_clk to Xenon SDHCI driver (2017-03-21 21:06:59 +0900)
----------------------------------------------------------------
Felipe Balbi (2):
mmc: pci: Add CONFIG_MMC_PCI
mmc: tangier: Add Intel Tangier eMMC/SDHCI driver
Kevin Liu (1):
mmc: sdhci: only flush cache for data command
Stefan Roese (1):
mmc: xenon_sdhci: Add missing host->max_clk to Xenon SDHCI driver
Xu Ziyuan (1):
mmc: drop unnecessary send_status request
configs/bayleybay_defconfig | 1 +
...conga-qeval20-qa3-e3845-internal-uart_defconfig | 1 +
configs/conga-qeval20-qa3-e3845_defconfig | 1 +
configs/crownbay_defconfig | 1 +
configs/dfi-bt700-q7x-151_defconfig | 1 +
configs/galileo_defconfig | 1 +
configs/minnowmax_defconfig | 1 +
configs/theadorable-x86-dfi-bt700_defconfig | 1 +
drivers/mmc/Kconfig | 22 ++++++
drivers/mmc/Makefile | 3 +-
drivers/mmc/mmc.c | 4 --
drivers/mmc/sdhci.c | 6 +-
drivers/mmc/tangier_sdhci.c | 81 ++++++++++++++++++++++
drivers/mmc/xenon_sdhci.c | 3 +-
14 files changed, 119 insertions(+), 8 deletions(-)
create mode 100644 drivers/mmc/tangier_sdhci.c
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-03-21 12:11 ` Jaehoon Chung
@ 2017-03-22 0:51 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2017-03-22 0:51 UTC (permalink / raw)
To: u-boot
On Tue, Mar 21, 2017 at 09:11:00PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches into your master branch?
>
> The following changes since commit d5abcf94c7123167725fc22ace342f0d455093c1:
>
> ti: boot: Register the MMC controllers in SPL in the same way as in u-boot (2017-03-19 22:17:14 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to de0359c21e7993f7cf39156932fb73d171b2450a:
>
> mmc: xenon_sdhci: Add missing host->max_clk to Xenon SDHCI driver (2017-03-21 21:06:59 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170321/2d2e4b74/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170209115016epcas5p2c78275706402e633c0da384936a1692f@epcas5p2.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170209115016epcas5p2c78275706402e633c0da384936a1692f@epcas5p2.samsung.com>
@ 2017-02-09 11:50 ` Jaehoon Chung
2017-02-09 19:50 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-02-09 11:50 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches on your master branch?
These patch are related to pmic and mmc. (Tested buildman.)
If you are ok, i will send the split PR at next time.
(One is u-boot-mmc master, other is u-boot-mmc pmic)
What do you think about? Plz let me know.
The following changes since commit 21342d4aed6c77a4aa7a5b2579b3c23e21aea31a:
Merge git://git.denx.de/u-boot-dm (2017-02-08 16:24:44 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to a0269bb6e891c6c3b984a2f3d6a12c07e244484a:
mmc: init mmc block devices on probe (2017-02-09 20:37:06 +0900)
----------------------------------------------------------------
Adam Ford (1):
drivers: mmc: omap_hsmmc: Fix IO Buffer on OMAP36xx
Fiach Antaw (1):
mmc: init mmc block devices on probe
Jaehoon Chung (4):
power: pmic: add the max8997 controller for DM
arm: dts: trats: add the pmic node for using DM
mmc: mmc-uclass: use the fixed devnum with alias node
mmc: ftsdc021_sdhci: remove the ftsdc021_sdhci.c
arch/arm/dts/exynos4210-trats.dts | 150 ++++++++++++++++++++++++++++++++++++--
configs/omap3_logic_defconfig | 1 +
drivers/mmc/Kconfig | 12 +++
drivers/mmc/Makefile | 1 -
drivers/mmc/ftsdc021_sdhci.c | 34 ---------
drivers/mmc/mmc-uclass.c | 25 ++++++-
drivers/mmc/omap_hsmmc.c | 18 +++++
drivers/power/pmic/Kconfig | 15 ++++
drivers/power/pmic/Makefile | 1 +
drivers/power/pmic/max8997.c | 61 ++++++++++++++++
drivers/power/pmic/max8998.c | 2 +-
11 files changed, 273 insertions(+), 47 deletions(-)
delete mode 100644 drivers/mmc/ftsdc021_sdhci.c
create mode 100644 drivers/power/pmic/max8997.c
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-02-09 11:50 ` Jaehoon Chung
@ 2017-02-09 19:50 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2017-02-09 19:50 UTC (permalink / raw)
To: u-boot
On Thu, Feb 09, 2017 at 08:50:16PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches on your master branch?
> These patch are related to pmic and mmc. (Tested buildman.)
>
> If you are ok, i will send the split PR at next time.
> (One is u-boot-mmc master, other is u-boot-mmc pmic)
> What do you think about? Plz let me know.
>
> The following changes since commit 21342d4aed6c77a4aa7a5b2579b3c23e21aea31a:
>
> Merge git://git.denx.de/u-boot-dm (2017-02-08 16:24:44 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to a0269bb6e891c6c3b984a2f3d6a12c07e244484a:
>
> mmc: init mmc block devices on probe (2017-02-09 20:37:06 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170209/32c52c3c/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170131232440epcas5p2ff99c09928cf938f10d640785b25b911@epcas5p2.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170131232440epcas5p2ff99c09928cf938f10d640785b25b911@epcas5p2.samsung.com>
@ 2017-01-31 23:24 ` Jaehoon Chung
2017-02-01 21:33 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-01-31 23:24 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches on your master branch?
I have tested a buildman with all case.
The following changes since commit 794c6e2c96c20f8fc62890a5e13cc71ab99a2e57:
Prepare v2017.03-rc1 (2017-01-30 19:05:43 -0500)
are available in the git repository at:
http://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to dd3b64eb56dae10016bd314e59a650da511c1a4e:
mmc: atmel: rename CONFIG_ATMEL_SDHCI to CONFIG_MMC_SDHCI_ATMEL (2017-01-31 21:50:47 +0900)
----------------------------------------------------------------
Masahiro Yamada (7):
mmc: move CONFIG_GENERIC_MMC to Kconfig
mmc: sandbox: rename CONFIG, fix dependency, and use it in Makefile
mmc: zynq: rename CONFIG_ZYNQ_SDHCI to CONFIG_MMC_SDHCI_ZYNQ
mmc: rockchip: rename CONFIG_ROCKCHIP_SDHCI to CONFIG_MMC_SDHCI_ROCKCHIP
mmc: msm: rename CONFIG_MSM_SDHCI to CONFIG_MMC_SDHCI_MSM
mmc: pic32: rename CONFIG_PIC32_SDHCI to CONFIG_MMC_SDHCI_PIC32
mmc: atmel: rename CONFIG_ATMEL_SDHCI to CONFIG_MMC_SDHCI_ATMEL
README | 3 -
arch/arm/mach-zynq/Kconfig | 2 +-
configs/blanche_defconfig | 3 +-
configs/dragonboard410c_defconfig | 2 +-
configs/evb-rk3399_defconfig | 2 +-
configs/pic32mzdask_defconfig | 2 +-
configs/sama5d2_xplained_mmc_defconfig | 2 +-
configs/sama5d2_xplained_spiflash_defconfig | 2 +-
configs/sandbox_defconfig | 2 +-
configs/sandbox_noblk_defconfig | 1 +
configs/sandbox_spl_defconfig | 2 +-
configs/topic_miami_defconfig | 2 +-
configs/topic_miamiplus_defconfig | 2 +-
configs/xilinx_zynqmp_ep_defconfig | 2 +-
configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 2 +-
configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 2 +-
configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 2 +-
configs/xilinx_zynqmp_zcu102_defconfig | 2 +-
configs/xilinx_zynqmp_zcu102_revB_defconfig | 2 +-
configs/zynq_microzed_defconfig | 2 +-
configs/zynq_picozed_defconfig | 2 +-
configs/zynq_zc702_defconfig | 2 +-
configs/zynq_zc706_defconfig | 2 +-
configs/zynq_zc770_xm010_defconfig | 2 +-
configs/zynq_zed_defconfig | 2 +-
configs/zynq_zybo_defconfig | 2 +-
doc/README.atmel_mci | 2 -
doc/README.socfpga | 3 -
drivers/mmc/Kconfig | 96 +++++++++++++-----------
drivers/mmc/Makefile | 16 ++--
include/configs/BSC9132QDS.h | 1 -
include/configs/MPC8308RDB.h | 2 -
include/configs/MPC837XEMDS.h | 1 -
include/configs/MPC837XERDB.h | 1 -
include/configs/MPC8536DS.h | 1 -
include/configs/MPC8569MDS.h | 1 -
include/configs/P1010RDB.h | 1 -
include/configs/P1022DS.h | 1 -
include/configs/P2041RDB.h | 1 -
include/configs/T102xQDS.h | 1 -
include/configs/T102xRDB.h | 1 -
include/configs/T1040QDS.h | 1 -
include/configs/T104xRDB.h | 1 -
include/configs/T208xQDS.h | 1 -
include/configs/T208xRDB.h | 1 -
include/configs/T4240QDS.h | 1 -
include/configs/T4240RDB.h | 1 -
include/configs/UCP1020.h | 1 -
include/configs/adp-ag101p.h | 1 -
include/configs/advantech_dms-ba16.h | 1 -
include/configs/alt.h | 2 -
include/configs/am3517_crane.h | 1 -
include/configs/am3517_evm.h | 3 -
include/configs/apalis_imx6.h | 1 -
include/configs/apalis_t30.h | 3 -
include/configs/apf27.h | 1 -
include/configs/at91sam9260ek.h | 1 -
include/configs/at91sam9263ek.h | 1 -
include/configs/at91sam9m10g45ek.h | 1 -
include/configs/at91sam9n12ek.h | 1 -
include/configs/at91sam9rlek.h | 1 -
include/configs/at91sam9x5ek.h | 1 -
include/configs/atngw100.h | 1 -
include/configs/atngw100mkii.h | 1 -
include/configs/atstk1002.h | 1 -
include/configs/axs10x.h | 5 --
include/configs/bayleybay.h | 2 -
include/configs/bcm23550_w1d.h | 2 -
include/configs/bcm28155_ap.h | 2 -
include/configs/beaver.h | 3 -
include/configs/bf518f-ezbrd.h | 1 -
include/configs/bf527-ad7160-eval.h | 1 -
include/configs/bf537-stamp.h | 3 -
include/configs/bf548-ezkit.h | 1 -
include/configs/bf609-ezkit.h | 1 -
include/configs/blanche.h | 2 -
include/configs/brppt1.h | 1 -
include/configs/brxre1.h | 1 -
include/configs/cardhu.h | 3 -
include/configs/cei-tk1-som.h | 3 -
include/configs/clearfog.h | 1 -
include/configs/cm-bf537e.h | 1 -
include/configs/cm-bf537u.h | 1 -
include/configs/cm_t35.h | 2 -
include/configs/cm_t3517.h | 2 -
include/configs/colibri_imx6.h | 1 -
include/configs/colibri_t20.h | 3 -
include/configs/colibri_t30.h | 3 -
include/configs/colibri_vf.h | 2 -
include/configs/conga-qeval20-qa3-e3845.h | 2 -
include/configs/controlcenterd.h | 2 -
include/configs/corenet_ds.h | 1 -
include/configs/crownbay.h | 2 -
include/configs/cyrus.h | 1 -
include/configs/da850evm.h | 5 --
include/configs/dalmore.h | 3 -
include/configs/db-88f6820-gp.h | 1 -
include/configs/dfi-bt700.h | 2 -
include/configs/dragonboard410c.h | 3 -
include/configs/e2220-1170.h | 3 -
include/configs/ethernut5.h | 1 -
include/configs/exynos-common.h | 1 -
include/configs/galileo.h | 3 -
include/configs/ge_bx50v3.h | 1 -
include/configs/gose.h | 1 -
include/configs/harmony.h | 3 -
include/configs/hikey.h | 1 -
include/configs/hrcon.h | 2 -
include/configs/imx27lite-common.h | 5 --
include/configs/jetson-tk1.h | 3 -
include/configs/k2g_evm.h | 3 -
include/configs/kc1.h | 6 --
include/configs/koelsch.h | 1 -
include/configs/lager.h | 2 -
include/configs/legoev3.h | 3 -
include/configs/ls1012aqds.h | 1 -
include/configs/ls1012ardb.h | 1 -
include/configs/ls1021aiot.h | 1 -
include/configs/ls1021aqds.h | 1 -
include/configs/ls1021atwr.h | 1 -
include/configs/ls1043a_common.h | 1 -
include/configs/ls1046a_common.h | 1 -
include/configs/ls2080a_simu.h | 1 -
include/configs/ls2080aqds.h | 1 -
include/configs/ls2080ardb.h | 1 -
include/configs/m53evk.h | 1 -
include/configs/ma5d4evk.h | 1 -
include/configs/mcx.h | 1 -
include/configs/medcom-wide.h | 3 -
include/configs/minnowmax.h | 2 -
include/configs/mvebu_armada-8k.h | 3 -
include/configs/mvebu_db-88f3720.h | 3 -
include/configs/mx25pdk.h | 1 -
include/configs/mx35pdk.h | 1 -
include/configs/mx51evk.h | 2 -
include/configs/mx53ard.h | 2 -
include/configs/mx53cx9020.h | 2 -
include/configs/mx53evk.h | 2 -
include/configs/mx53loco.h | 2 -
include/configs/mx53smd.h | 2 -
include/configs/mx6_common.h | 1 -
include/configs/mx7_common.h | 1 -
include/configs/mxs.h | 1 -
include/configs/nokia_rx51.h | 1 -
include/configs/nyan-big.h | 3 -
include/configs/omap3_evm.h | 3 -
include/configs/omapl138_lcdk.h | 2 -
include/configs/openrd.h | 1 -
include/configs/p1_p2_rdb_pc.h | 1 -
include/configs/p1_twr.h | 1 -
include/configs/p2371-0000.h | 3 -
include/configs/p2371-2180.h | 3 -
include/configs/p2571.h | 3 -
include/configs/p2771-0000.h | 3 -
include/configs/paz00.h | 3 -
include/configs/pcm052.h | 2 -
include/configs/pic32mzdask.h | 5 --
include/configs/pico-imx6ul.h | 2 -
include/configs/picosam9g45.h | 1 -
include/configs/plutux.h | 3 -
include/configs/porter.h | 1 -
include/configs/pxa-common.h | 1 -
include/configs/rk3036_common.h | 1 -
include/configs/rk3288_common.h | 1 -
include/configs/rk3399_common.h | 1 -
include/configs/rpi.h | 3 -
include/configs/s32v234evb.h | 1 -
include/configs/s5p_goni.h | 1 -
include/configs/sama5d2_xplained.h | 5 --
include/configs/sama5d3_xplained.h | 1 -
include/configs/sama5d3xek.h | 1 -
include/configs/sama5d4_xplained.h | 1 -
include/configs/sama5d4ek.h | 1 -
include/configs/sandbox.h | 2 -
include/configs/seaboard.h | 3 -
include/configs/sh7752evb.h | 1 -
include/configs/sh7753evb.h | 1 -
include/configs/sh7757lcr.h | 1 -
include/configs/sheevaplug.h | 1 -
include/configs/siemens-am33x-common.h | 2 -
include/configs/silk.h | 1 -
include/configs/snapper9g45.h | 1 -
include/configs/sniper.h | 6 --
include/configs/socfpga_common.h | 1 -
include/configs/stout.h | 3 -
include/configs/strider.h | 2 -
include/configs/sunxi-common.h | 1 -
include/configs/tam3517-common.h | 2 -
include/configs/tao3530.h | 1 -
include/configs/tcm-bf537.h | 1 -
include/configs/tec-ng.h | 3 -
include/configs/tec.h | 3 -
include/configs/tegra-common-post.h | 7 --
include/configs/ti814x_evm.h | 1 -
include/configs/ti816x_evm.h | 1 -
include/configs/ti_armv7_common.h | 3 -
include/configs/ti_armv7_keystone2.h | 7 --
include/configs/tricorder.h | 3 -
include/configs/trimslice.h | 3 -
include/configs/ts4800.h | 2 -
include/configs/uniphier.h | 1 -
include/configs/usbarmory.h | 1 -
include/configs/venice2.h | 3 -
include/configs/ventana.h | 3 -
include/configs/vexpress_common.h | 1 -
include/configs/vf610twr.h | 2 -
include/configs/vinco.h | 1 -
include/configs/whistler.h | 3 -
include/configs/woodburn_common.h | 1 -
include/configs/xilinx_zynqmp.h | 11 ++-
include/configs/zipitz2.h | 1 -
include/configs/zynq-common.h | 9 +--
scripts/config_whitelist.txt | 1 -
213 files changed, 93 insertions(+), 427 deletions(-)
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170124093735epcas5p2696f062ee887233d1eacc5319f25b156@epcas5p2.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170124093735epcas5p2696f062ee887233d1eacc5319f25b156@epcas5p2.samsung.com>
@ 2017-01-24 9:37 ` Jaehoon Chung
2017-01-25 2:15 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-01-24 9:37 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches on your master branch?
The following changes since commit 0c9e85f67cd86d2d7a3424ea3ebff0e6db7a3915:
Merge branch 'master' of git://git.denx.de/u-boot-uniphier (2017-01-22 17:07:48 -0500)
are available in the git repository at:
http://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 919b485834a746cf839ccded41e456d17d57a31f:
mmc: Print error code for mmc_complete_init failure (2017-01-23 15:37:42 +0900)
----------------------------------------------------------------
Jagan Teki (1):
mmc: Print error code for mmc_complete_init failure
Stefan Herbrechtsmeier (1):
mmc: sdhci: Distinguish between base clock and maximum peripheral frequency
drivers/mmc/atmel_sdhci.c | 7 +++++--
drivers/mmc/bcm2835_sdhci.c | 3 ++-
drivers/mmc/ftsdc021_sdhci.c | 3 ++-
drivers/mmc/kona_sdhci.c | 3 ++-
drivers/mmc/mmc.c | 4 +++-
drivers/mmc/msm_sdhci.c | 2 ++
drivers/mmc/mv_sdhci.c | 3 ++-
drivers/mmc/pci_mmc.c | 1 +
drivers/mmc/pic32_sdhci.c | 4 +++-
drivers/mmc/rockchip_sdhci.c | 4 ++--
drivers/mmc/s5p_sdhci.c | 5 +++--
drivers/mmc/sdhci.c | 34 ++++++++++++++++++----------------
drivers/mmc/zynq_sdhci.c | 4 +++-
include/sdhci.h | 13 +++++++------
14 files changed, 55 insertions(+), 35 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170110054802epcas5p47773e1927ecb61adccb970ff738c45a2@epcas5p4.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170110054802epcas5p47773e1927ecb61adccb970ff738c45a2@epcas5p4.samsung.com>
@ 2017-01-10 5:48 ` Jaehoon Chung
2017-01-10 17:32 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-01-10 5:48 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches on your master branch?
If there is an issue, let me know, plz.(Buildman was passed.)
The following changes since commit a705ebc81b7f91bbd0ef7c634284208342901149:
Prepare v2017.01 (2017-01-09 11:57:05 -0500)
are available in the git repository at:
http://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to e20dd3f86f05227e75d979f100559cfdace2816b:
ARM: sunxi: remove bare default for CONFIG_MMC (2017-01-10 14:08:23 +0900)
----------------------------------------------------------------
Jaehoon Chung (12):
mmc: sdhci: disable the 8bit mode when host doesn't support it
mmc: sdhci: add the get_cd callback function in sdhci_ops
mmc: sdhci: remove the unused code about testing Card detect
mmc: pic32_sdhci: move the code to pic32_sdhci.c
mmc: sdhci: remove the SDHCI_QUIRK_NO_CD
mmc: change the set_ios return type from void to int
mmc: s5p_sdhci: add the s5p_set_clock function
mmc: sdhci: move the callback function into sdhci_ops
mmc: sdhci: use the bitops APIs in sdhci.h
mmc: sdhci: remove the SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER
mmc: sdhci: combine the Host controller v3.0 feature into one condition
power: change from meaningless value to error number
Masahiro Yamada (9):
mmc: sdhci-cadence: add Cadence SD4HC support
mmc: uniphier-sd: fix Kconfig dependency
ARM: socfpga: remove unused CONFIG option and cleanup README.socfpga
mmc: rename CONFIG_ROCKCHIP_DWMMC to CONFIG_MMC_DW_ROCKCHIP
mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DW
mmc: move DesignWare-based drivers to Kconfig
ARM: davinci: remove unused CONFIG_DAVINCI_MMC_SD1
mmc: move more driver config options to Kconfig
ARM: sunxi: remove bare default for CONFIG_MMC
arch/arm/cpu/arm926ejs/mx27/generic.c | 8 +-
arch/arm/include/asm/arch-mx27/imx-regs.h | 4 +-
arch/arm/mach-davinci/da830_pinmux.c | 2 +-
arch/arm/mach-omap2/am33xx/board.c | 2 +-
arch/arm/mach-tegra/board2.c | 2 +-
board/armadeus/apf27/apf27.c | 2 +-
board/avionic-design/common/tamonten.c | 2 +-
board/compal/paz00/paz00.c | 2 +-
board/davinci/da8xxevm/da850evm.c | 12 +--
board/davinci/da8xxevm/omapl138_lcdk.c | 10 +--
board/hisilicon/hikey/hikey.c | 2 +-
board/htkw/mcx/mcx.c | 2 +-
board/lego/ev3/legoev3.c | 4 +-
board/nvidia/cardhu/cardhu.c | 2 +-
board/nvidia/dalmore/dalmore.c | 2 +-
board/nvidia/harmony/harmony.c | 2 +-
board/nvidia/seaboard/seaboard.c | 2 +-
board/nvidia/whistler/whistler.c | 2 +-
board/samsung/common/board.c | 2 +-
board/sunxi/Kconfig | 4 -
board/technexion/twister/twister.c | 2 +-
board/teejet/mt_ventoux/mt_ventoux.c | 2 +-
board/toradex/colibri_t20/colibri_t20.c | 2 +-
configs/am335x_baltos_defconfig | 1 +
configs/am335x_boneblack_defconfig | 1 +
configs/am335x_boneblack_vboot_defconfig | 1 +
configs/am335x_evm_defconfig | 1 +
configs/am335x_evm_nor_defconfig | 1 +
configs/am335x_evm_norboot_defconfig | 1 +
configs/am335x_evm_spiboot_defconfig | 1 +
configs/am335x_evm_usbspl_defconfig | 1 +
configs/am335x_igep0033_defconfig | 1 +
configs/am335x_shc_defconfig | 1 +
configs/am335x_shc_ict_defconfig | 1 +
configs/am335x_shc_netboot_defconfig | 1 +
configs/am335x_shc_prompt_defconfig | 1 +
configs/am335x_shc_sdboot_defconfig | 1 +
configs/am335x_shc_sdboot_prompt_defconfig | 1 +
configs/am335x_sl50_defconfig | 1 +
configs/am3517_crane_defconfig | 1 +
configs/am3517_evm_defconfig | 1 +
configs/am43xx_evm_defconfig | 1 +
configs/am43xx_evm_ethboot_defconfig | 1 +
configs/am43xx_evm_qspiboot_defconfig | 1 +
configs/am43xx_evm_usbhost_boot_defconfig | 1 +
configs/am43xx_hs_evm_defconfig | 1 +
configs/am57xx_evm_defconfig | 1 +
configs/am57xx_evm_nodt_defconfig | 1 +
configs/am57xx_hs_evm_defconfig | 1 +
configs/apf27_defconfig | 1 +
configs/apx4devkit_defconfig | 1 +
configs/arndale_defconfig | 1 +
configs/axs101_defconfig | 1 +
configs/axs103_defconfig | 1 +
configs/birdland_bav335a_defconfig | 1 +
configs/birdland_bav335b_defconfig | 1 +
configs/brppt1_mmc_defconfig | 1 +
configs/brppt1_spi_defconfig | 1 +
configs/brxre1_defconfig | 1 +
configs/cairo_defconfig | 1 +
configs/chromebit_mickey_defconfig | 3 +-
configs/chromebook_jerry_defconfig | 3 +-
configs/chromebook_minnie_defconfig | 3 +-
configs/cl-som-am57x_defconfig | 1 +
configs/cm_t335_defconfig | 1 +
configs/cm_t3517_defconfig | 1 +
configs/cm_t35_defconfig | 1 +
configs/cm_t43_defconfig | 1 +
configs/cm_t54_defconfig | 1 +
configs/devkit8000_defconfig | 1 +
configs/dra7xx_evm_defconfig | 1 +
configs/dra7xx_hs_evm_defconfig | 1 +
configs/draco_defconfig | 1 +
configs/duovero_defconfig | 1 +
configs/eco5pk_defconfig | 1 +
configs/etamin_defconfig | 1 +
configs/evb-rk3036_defconfig | 3 +-
configs/evb-rk3288_defconfig | 3 +-
configs/evb-rk3399_defconfig | 3 +-
configs/fennec-rk3288_defconfig | 3 +-
configs/firefly-rk3288_defconfig | 3 +-
configs/hikey_defconfig | 2 +
configs/igep0020_defconfig | 1 +
configs/igep0030_defconfig | 1 +
configs/igep0032_defconfig | 1 +
configs/k2g_evm_defconfig | 1 +
configs/kc1_defconfig | 1 +
configs/kylin-rk3036_defconfig | 3 +-
configs/m28evk_defconfig | 1 +
configs/mcx_defconfig | 1 +
configs/miniarm-rk3288_defconfig | 3 +-
configs/mt_ventoux_defconfig | 1 +
configs/mx23_olinuxino_defconfig | 1 +
configs/mx23evk_defconfig | 1 +
configs/mx28evk_auart_console_defconfig | 1 +
configs/mx28evk_defconfig | 1 +
configs/mx28evk_nand_defconfig | 1 +
configs/mx28evk_spi_defconfig | 1 +
configs/nokia_rx51_defconfig | 1 +
configs/odroid-xu3_defconfig | 1 +
configs/odroid_defconfig | 1 +
configs/omap3_beagle_defconfig | 1 +
configs/omap3_evm_defconfig | 1 +
configs/omap3_ha_defconfig | 1 +
configs/omap3_logic_defconfig | 1 +
configs/omap3_overo_defconfig | 1 +
configs/omap3_pandora_defconfig | 1 +
configs/omap3_zoom1_defconfig | 1 +
configs/omap4_panda_defconfig | 1 +
configs/omap4_sdp4430_defconfig | 1 +
configs/omap5_uevm_defconfig | 1 +
configs/origen_defconfig | 1 +
configs/pcm051_rev1_defconfig | 1 +
configs/pcm051_rev3_defconfig | 1 +
configs/peach-pi_defconfig | 1 +
configs/peach-pit_defconfig | 1 +
configs/pengwyn_defconfig | 1 +
configs/pepper_defconfig | 1 +
configs/popmetal-rk3288_defconfig | 3 +-
configs/pxm2_defconfig | 1 +
configs/rastaban_defconfig | 1 +
configs/rock2_defconfig | 3 +-
configs/rut_defconfig | 1 +
configs/s5pc210_universal_defconfig | 1 +
configs/sansa_fuze_plus_defconfig | 1 +
configs/sc_sps_1_defconfig | 1 +
configs/smdk5250_defconfig | 1 +
configs/smdk5420_defconfig | 1 +
configs/smdkv310_defconfig | 1 +
configs/sniper_defconfig | 1 +
configs/snow_defconfig | 1 +
configs/socfpga_arria5_defconfig | 1 +
configs/socfpga_cyclone5_defconfig | 1 +
configs/socfpga_de0_nano_soc_defconfig | 1 +
configs/socfpga_de1_soc_defconfig | 1 +
configs/socfpga_mcvevk_defconfig | 1 +
configs/socfpga_sockit_defconfig | 1 +
configs/socfpga_socrates_defconfig | 1 +
configs/socfpga_sr1500_defconfig | 1 +
configs/socfpga_vining_fpga_defconfig | 1 +
configs/spring_defconfig | 1 +
configs/tao3530_defconfig | 1 +
configs/thuban_defconfig | 1 +
configs/ti814x_evm_defconfig | 1 +
configs/ti816x_evm_defconfig | 1 +
configs/trats2_defconfig | 1 +
configs/trats_defconfig | 1 +
configs/tricorder_defconfig | 1 +
configs/tricorder_flash_defconfig | 1 +
configs/ts4600_defconfig | 1 +
configs/twister_defconfig | 1 +
configs/xfi3_defconfig | 1 +
doc/README.socfpga | 32 -------
drivers/mmc/Kconfig | 107 ++++++++++++++++++++++-
drivers/mmc/Makefile | 27 +++---
drivers/mmc/dw_mmc.c | 5 +-
drivers/mmc/mxsmmc.c | 4 +-
drivers/mmc/omap_hsmmc.c | 6 +-
drivers/mmc/pic32_sdhci.c | 15 +++-
drivers/mmc/s5p_sdhci.c | 15 +++-
drivers/mmc/sdhci-cadence.c | 125 +++++++++++++++++++++++++++
drivers/mmc/sdhci.c | 59 ++++---------
drivers/mmc/sunxi_mmc.c | 6 +-
drivers/power/axp152.c | 2 +-
drivers/power/axp209.c | 2 +-
drivers/power/battery/bat_trats2.c | 2 +-
drivers/power/exynos-tmu.c | 8 +-
drivers/power/fuel_gauge/fg_max17042.c | 4 +-
drivers/power/mfd/fg_max77693.c | 4 +-
drivers/power/mfd/pmic_max77693.c | 8 +-
drivers/power/palmas.c | 11 ++-
drivers/power/pmic/pmic_hi6553.c | 4 +-
drivers/power/pmic/pmic_max77686.c | 18 ++--
drivers/power/pmic/pmic_max8997.c | 8 +-
drivers/power/power_core.c | 8 +-
drivers/power/power_i2c.c | 22 ++---
drivers/power/power_spi.c | 18 ++--
drivers/power/tps6586x.c | 12 +--
include/configs/am3517_crane.h | 1 -
include/configs/am3517_evm.h | 1 -
include/configs/apalis_t30.h | 1 -
include/configs/apf27.h | 1 -
include/configs/axs10x.h | 1 -
include/configs/beaver.h | 1 -
include/configs/brppt1.h | 1 -
include/configs/brxre1.h | 1 -
include/configs/cardhu.h | 1 -
include/configs/cei-tk1-som.h | 1 -
include/configs/cm_t35.h | 1 -
include/configs/cm_t3517.h | 1 -
include/configs/colibri_t20.h | 1 -
include/configs/colibri_t30.h | 1 -
include/configs/da850evm.h | 2 -
include/configs/dalmore.h | 1 -
include/configs/e2220-1170.h | 1 -
include/configs/exynos-common.h | 2 -
include/configs/harmony.h | 1 -
include/configs/hikey.h | 2 -
include/configs/imx27lite-common.h | 1 -
include/configs/jetson-tk1.h | 1 -
include/configs/k2g_evm.h | 1 -
include/configs/kc1.h | 1 -
include/configs/legoev3.h | 2 -
include/configs/mcx.h | 1 -
include/configs/medcom-wide.h | 1 -
include/configs/mxs.h | 1 -
include/configs/nokia_rx51.h | 1 -
include/configs/nyan-big.h | 1 -
include/configs/omap3_evm.h | 1 -
include/configs/omapl138_lcdk.h | 1 -
include/configs/p2371-0000.h | 1 -
include/configs/p2371-2180.h | 1 -
include/configs/p2571.h | 1 -
include/configs/p2771-0000.h | 1 -
include/configs/paz00.h | 1 -
include/configs/plutux.h | 1 -
include/configs/rk3036_common.h | 1 -
include/configs/rk3288_common.h | 1 -
include/configs/rk3399_common.h | 1 -
include/configs/seaboard.h | 1 -
include/configs/siemens-am33x-common.h | 1 -
include/configs/sniper.h | 1 -
include/configs/socfpga_common.h | 3 -
include/configs/sunxi-common.h | 1 -
include/configs/tam3517-common.h | 1 -
include/configs/tao3530.h | 1 -
include/configs/tec-ng.h | 1 -
include/configs/tec.h | 1 -
include/configs/tegra-common-post.h | 3 -
include/configs/ti814x_evm.h | 1 -
include/configs/ti816x_evm.h | 1 -
include/configs/ti_armv7_omap.h | 3 -
include/configs/tricorder.h | 1 -
include/configs/trimslice.h | 1 -
include/configs/venice2.h | 1 -
include/configs/ventana.h | 1 -
include/configs/whistler.h | 1 -
include/mmc.h | 2 +-
include/sdhci.h | 131 ++++++++++++++---------------
239 files changed, 608 insertions(+), 356 deletions(-)
create mode 100644 drivers/mmc/sdhci-cadence.c
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-01-10 5:48 ` Jaehoon Chung
@ 2017-01-10 17:32 ` Tom Rini
2017-01-11 2:11 ` Jaehoon Chung
2017-01-11 12:39 ` Jaehoon Chung
0 siblings, 2 replies; 71+ messages in thread
From: Tom Rini @ 2017-01-10 17:32 UTC (permalink / raw)
To: u-boot
On Tue, Jan 10, 2017 at 02:48:01PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches on your master branch?
> If there is an issue, let me know, plz.(Buildman was passed.)
I don't think you're including MIPS in your buildman runs, travis-ci
catches the following:
https://travis-ci.org/trini/u-boot/jobs/190603224
Which is some problems with:
commit da09b3024985d8a3be377a87fe0b3ddd67133c14
Author: Jaehoon Chung <jh80.chung@samsung.com>
Date: Fri Dec 30 15:30:14 2016 +0900
mmc: pic32_sdhci: move the code to pic32_sdhci.c
not being build tested. Please fix, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170110/359df42b/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-01-10 17:32 ` Tom Rini
@ 2017-01-11 2:11 ` Jaehoon Chung
2017-01-11 12:39 ` Jaehoon Chung
1 sibling, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-01-11 2:11 UTC (permalink / raw)
To: u-boot
On 01/11/2017 02:32 AM, Tom Rini wrote:
> On Tue, Jan 10, 2017 at 02:48:01PM +0900, Jaehoon Chung wrote:
>
>> Dear Tom,
>>
>> Could you pull these patches on your master branch?
>> If there is an issue, let me know, plz.(Buildman was passed.)
>
> I don't think you're including MIPS in your buildman runs, travis-ci
> catches the following:
> https://travis-ci.org/trini/u-boot/jobs/190603224
>
> Which is some problems with:
> commit da09b3024985d8a3be377a87fe0b3ddd67133c14
> Author: Jaehoon Chung <jh80.chung@samsung.com>
> Date: Fri Dec 30 15:30:14 2016 +0900
>
> mmc: pic32_sdhci: move the code to pic32_sdhci.c
>
> not being build tested. Please fix, thanks!
Oh, sorry for it. i will recheck it and resend the PR.
Best Regards,
Jaehoon Chung
>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-01-10 17:32 ` Tom Rini
2017-01-11 2:11 ` Jaehoon Chung
@ 2017-01-11 12:39 ` Jaehoon Chung
2017-01-11 16:28 ` Tom Rini
1 sibling, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2017-01-11 12:39 UTC (permalink / raw)
To: u-boot
Dear Tom,
I fixed the buildman error, and pushed them by force.
- checked the mips, arm and the other things with buildman.
- And rebased on latest u-boot/master
Sorry for not checking in more detail
Could you pull these patches on your master branch?
The following changes since commit 04770e6e917b0f766a9496e3f37bcdf2ebb1beb4:
Merge git://git.denx.de/u-boot-dm (2017-01-10 08:19:33 -0500)
are available in the git repository at:
http://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to f401e907fcbc94adff1a8e8097c8f0a5b0aee580:
ARM: sunxi: remove bare default for CONFIG_MMC (2017-01-11 19:40:15 +0900)
----------------------------------------------------------------
Jaehoon Chung (12):
mmc: sdhci: disable the 8bit mode when host doesn't support it
mmc: sdhci: add the get_cd callback function in sdhci_ops
mmc: sdhci: remove the unused code about testing Card detect
mmc: pic32_sdhci: move the code to pic32_sdhci.c
mmc: sdhci: remove the SDHCI_QUIRK_NO_CD
mmc: change the set_ios return type from void to int
mmc: s5p_sdhci: add the s5p_set_clock function
mmc: sdhci: move the callback function into sdhci_ops
mmc: sdhci: use the bitops APIs in sdhci.h
mmc: sdhci: remove the SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER
mmc: sdhci: combine the Host controller v3.0 feature into one condition
power: change from meaningless value to error number
Masahiro Yamada (9):
mmc: sdhci-cadence: add Cadence SD4HC support
mmc: uniphier-sd: fix Kconfig dependency
ARM: socfpga: remove unused CONFIG option and cleanup README.socfpga
mmc: rename CONFIG_ROCKCHIP_DWMMC to CONFIG_MMC_DW_ROCKCHIP
mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DW
mmc: move DesignWare-based drivers to Kconfig
ARM: davinci: remove unused CONFIG_DAVINCI_MMC_SD1
mmc: move more driver config options to Kconfig
ARM: sunxi: remove bare default for CONFIG_MMC
arch/arm/cpu/arm926ejs/mx27/generic.c | 8 +-
arch/arm/include/asm/arch-mx27/imx-regs.h | 4 +-
arch/arm/mach-davinci/da830_pinmux.c | 2 +-
arch/arm/mach-omap2/am33xx/board.c | 2 +-
arch/arm/mach-tegra/board2.c | 2 +-
board/armadeus/apf27/apf27.c | 2 +-
board/avionic-design/common/tamonten.c | 2 +-
board/compal/paz00/paz00.c | 2 +-
board/davinci/da8xxevm/da850evm.c | 12 +--
board/davinci/da8xxevm/omapl138_lcdk.c | 10 +--
board/hisilicon/hikey/hikey.c | 2 +-
board/htkw/mcx/mcx.c | 2 +-
board/lego/ev3/legoev3.c | 4 +-
board/nvidia/cardhu/cardhu.c | 2 +-
board/nvidia/dalmore/dalmore.c | 2 +-
board/nvidia/harmony/harmony.c | 2 +-
board/nvidia/seaboard/seaboard.c | 2 +-
board/nvidia/whistler/whistler.c | 2 +-
board/samsung/common/board.c | 2 +-
board/sunxi/Kconfig | 4 -
board/technexion/twister/twister.c | 2 +-
board/teejet/mt_ventoux/mt_ventoux.c | 2 +-
board/toradex/colibri_t20/colibri_t20.c | 2 +-
configs/am335x_baltos_defconfig | 1 +
configs/am335x_boneblack_defconfig | 1 +
configs/am335x_boneblack_vboot_defconfig | 1 +
configs/am335x_evm_defconfig | 1 +
configs/am335x_evm_nor_defconfig | 1 +
configs/am335x_evm_norboot_defconfig | 1 +
configs/am335x_evm_spiboot_defconfig | 1 +
configs/am335x_evm_usbspl_defconfig | 1 +
configs/am335x_igep0033_defconfig | 1 +
configs/am335x_shc_defconfig | 1 +
configs/am335x_shc_ict_defconfig | 1 +
configs/am335x_shc_netboot_defconfig | 1 +
configs/am335x_shc_prompt_defconfig | 1 +
configs/am335x_shc_sdboot_defconfig | 1 +
configs/am335x_shc_sdboot_prompt_defconfig | 1 +
configs/am335x_sl50_defconfig | 1 +
configs/am3517_crane_defconfig | 1 +
configs/am3517_evm_defconfig | 1 +
configs/am43xx_evm_defconfig | 1 +
configs/am43xx_evm_ethboot_defconfig | 1 +
configs/am43xx_evm_qspiboot_defconfig | 1 +
configs/am43xx_evm_usbhost_boot_defconfig | 1 +
configs/am43xx_hs_evm_defconfig | 1 +
configs/am57xx_evm_defconfig | 1 +
configs/am57xx_evm_nodt_defconfig | 1 +
configs/am57xx_hs_evm_defconfig | 1 +
configs/apf27_defconfig | 1 +
configs/apx4devkit_defconfig | 1 +
configs/arndale_defconfig | 1 +
configs/axs101_defconfig | 1 +
configs/axs103_defconfig | 1 +
configs/birdland_bav335a_defconfig | 1 +
configs/birdland_bav335b_defconfig | 1 +
configs/brppt1_mmc_defconfig | 1 +
configs/brppt1_spi_defconfig | 1 +
configs/brxre1_defconfig | 1 +
configs/cairo_defconfig | 1 +
configs/chromebit_mickey_defconfig | 3 +-
configs/chromebook_jerry_defconfig | 3 +-
configs/chromebook_minnie_defconfig | 3 +-
configs/cl-som-am57x_defconfig | 1 +
configs/cm_t335_defconfig | 1 +
configs/cm_t3517_defconfig | 1 +
configs/cm_t35_defconfig | 1 +
configs/cm_t43_defconfig | 1 +
configs/cm_t54_defconfig | 1 +
configs/devkit8000_defconfig | 1 +
configs/dra7xx_evm_defconfig | 1 +
configs/dra7xx_hs_evm_defconfig | 1 +
configs/draco_defconfig | 1 +
configs/duovero_defconfig | 1 +
configs/eco5pk_defconfig | 1 +
configs/etamin_defconfig | 1 +
configs/evb-rk3036_defconfig | 3 +-
configs/evb-rk3288_defconfig | 3 +-
configs/evb-rk3399_defconfig | 3 +-
configs/fennec-rk3288_defconfig | 3 +-
configs/firefly-rk3288_defconfig | 3 +-
configs/hikey_defconfig | 2 +
configs/igep0020_defconfig | 1 +
configs/igep0030_defconfig | 1 +
configs/igep0032_defconfig | 1 +
configs/k2g_evm_defconfig | 1 +
configs/kc1_defconfig | 1 +
configs/kylin-rk3036_defconfig | 3 +-
configs/m28evk_defconfig | 1 +
configs/mcx_defconfig | 1 +
configs/miniarm-rk3288_defconfig | 3 +-
configs/mt_ventoux_defconfig | 1 +
configs/mx23_olinuxino_defconfig | 1 +
configs/mx23evk_defconfig | 1 +
configs/mx28evk_auart_console_defconfig | 1 +
configs/mx28evk_defconfig | 1 +
configs/mx28evk_nand_defconfig | 1 +
configs/mx28evk_spi_defconfig | 1 +
configs/nokia_rx51_defconfig | 1 +
configs/odroid-xu3_defconfig | 1 +
configs/odroid_defconfig | 1 +
configs/omap3_beagle_defconfig | 1 +
configs/omap3_evm_defconfig | 1 +
configs/omap3_ha_defconfig | 1 +
configs/omap3_logic_defconfig | 1 +
configs/omap3_overo_defconfig | 1 +
configs/omap3_pandora_defconfig | 1 +
configs/omap3_zoom1_defconfig | 1 +
configs/omap4_panda_defconfig | 1 +
configs/omap4_sdp4430_defconfig | 1 +
configs/omap5_uevm_defconfig | 1 +
configs/origen_defconfig | 1 +
configs/pcm051_rev1_defconfig | 1 +
configs/pcm051_rev3_defconfig | 1 +
configs/peach-pi_defconfig | 1 +
configs/peach-pit_defconfig | 1 +
configs/pengwyn_defconfig | 1 +
configs/pepper_defconfig | 1 +
configs/popmetal-rk3288_defconfig | 3 +-
configs/pxm2_defconfig | 1 +
configs/rastaban_defconfig | 1 +
configs/rock2_defconfig | 3 +-
configs/rut_defconfig | 1 +
configs/s5pc210_universal_defconfig | 1 +
configs/sansa_fuze_plus_defconfig | 1 +
configs/sc_sps_1_defconfig | 1 +
configs/smdk5250_defconfig | 1 +
configs/smdk5420_defconfig | 1 +
configs/smdkv310_defconfig | 1 +
configs/sniper_defconfig | 1 +
configs/snow_defconfig | 1 +
configs/socfpga_arria5_defconfig | 1 +
configs/socfpga_cyclone5_defconfig | 1 +
configs/socfpga_de0_nano_soc_defconfig | 1 +
configs/socfpga_de1_soc_defconfig | 1 +
configs/socfpga_mcvevk_defconfig | 1 +
configs/socfpga_sockit_defconfig | 1 +
configs/socfpga_socrates_defconfig | 1 +
configs/socfpga_sr1500_defconfig | 1 +
configs/socfpga_vining_fpga_defconfig | 1 +
configs/spring_defconfig | 1 +
configs/tao3530_defconfig | 1 +
configs/thuban_defconfig | 1 +
configs/ti814x_evm_defconfig | 1 +
configs/ti816x_evm_defconfig | 1 +
configs/trats2_defconfig | 1 +
configs/trats_defconfig | 1 +
configs/tricorder_defconfig | 1 +
configs/tricorder_flash_defconfig | 1 +
configs/ts4600_defconfig | 1 +
configs/twister_defconfig | 1 +
configs/xfi3_defconfig | 1 +
doc/README.socfpga | 32 -------
drivers/mmc/Kconfig | 107 ++++++++++++++++++++++-
drivers/mmc/Makefile | 27 +++---
drivers/mmc/arm_pl180_mmci.c | 4 +-
drivers/mmc/bfin_sdh.c | 4 +-
drivers/mmc/davinci_mmc.c | 4 +-
drivers/mmc/dw_mmc.c | 5 +-
drivers/mmc/fsl_esdhc.c | 3 +-
drivers/mmc/ftsdc010_mci.c | 4 +-
drivers/mmc/gen_atmel_mci.c | 4 +-
drivers/mmc/mmc_spi.c | 3 +-
drivers/mmc/mvebu_mmc.c | 4 +-
drivers/mmc/mxcmmc.c | 4 +-
drivers/mmc/mxsmmc.c | 4 +-
drivers/mmc/omap_hsmmc.c | 6 +-
drivers/mmc/pic32_sdhci.c | 17 +++-
drivers/mmc/pxa_mmc_gen.c | 8 +-
drivers/mmc/s3c_sdi.c | 6 +-
drivers/mmc/s5p_sdhci.c | 15 +++-
drivers/mmc/sdhci-cadence.c | 125 +++++++++++++++++++++++++++
drivers/mmc/sdhci.c | 59 ++++---------
drivers/mmc/sh_mmcif.c | 4 +-
drivers/mmc/sh_sdhi.c | 6 +-
drivers/mmc/sunxi_mmc.c | 6 +-
drivers/mmc/tegra_mmc.c | 4 +-
drivers/power/axp152.c | 2 +-
drivers/power/axp209.c | 2 +-
drivers/power/battery/bat_trats2.c | 2 +-
drivers/power/exynos-tmu.c | 8 +-
drivers/power/fuel_gauge/fg_max17042.c | 4 +-
drivers/power/mfd/fg_max77693.c | 4 +-
drivers/power/mfd/pmic_max77693.c | 8 +-
drivers/power/palmas.c | 11 ++-
drivers/power/pmic/pmic_hi6553.c | 4 +-
drivers/power/pmic/pmic_max77686.c | 18 ++--
drivers/power/pmic/pmic_max8997.c | 8 +-
drivers/power/power_core.c | 8 +-
drivers/power/power_i2c.c | 22 ++---
drivers/power/power_spi.c | 18 ++--
drivers/power/tps6586x.c | 12 +--
include/configs/am3517_crane.h | 1 -
include/configs/am3517_evm.h | 1 -
include/configs/apalis_t30.h | 1 -
include/configs/apf27.h | 1 -
include/configs/axs10x.h | 1 -
include/configs/beaver.h | 1 -
include/configs/brppt1.h | 1 -
include/configs/brxre1.h | 1 -
include/configs/cardhu.h | 1 -
include/configs/cei-tk1-som.h | 1 -
include/configs/cm_t35.h | 1 -
include/configs/cm_t3517.h | 1 -
include/configs/colibri_t20.h | 1 -
include/configs/colibri_t30.h | 1 -
include/configs/da850evm.h | 2 -
include/configs/dalmore.h | 1 -
include/configs/e2220-1170.h | 1 -
include/configs/exynos-common.h | 2 -
include/configs/harmony.h | 1 -
include/configs/hikey.h | 2 -
include/configs/imx27lite-common.h | 1 -
include/configs/jetson-tk1.h | 1 -
include/configs/k2g_evm.h | 1 -
include/configs/kc1.h | 1 -
include/configs/legoev3.h | 2 -
include/configs/mcx.h | 1 -
include/configs/medcom-wide.h | 1 -
include/configs/mxs.h | 1 -
include/configs/nokia_rx51.h | 1 -
include/configs/nyan-big.h | 1 -
include/configs/omap3_evm.h | 1 -
include/configs/omapl138_lcdk.h | 1 -
include/configs/p2371-0000.h | 1 -
include/configs/p2371-2180.h | 1 -
include/configs/p2571.h | 1 -
include/configs/p2771-0000.h | 1 -
include/configs/paz00.h | 1 -
include/configs/plutux.h | 1 -
include/configs/rk3036_common.h | 1 -
include/configs/rk3288_common.h | 1 -
include/configs/rk3399_common.h | 1 -
include/configs/seaboard.h | 1 -
include/configs/siemens-am33x-common.h | 1 -
include/configs/sniper.h | 1 -
include/configs/socfpga_common.h | 3 -
include/configs/sunxi-common.h | 1 -
include/configs/tam3517-common.h | 1 -
include/configs/tao3530.h | 1 -
include/configs/tec-ng.h | 1 -
include/configs/tec.h | 1 -
include/configs/tegra-common-post.h | 3 -
include/configs/ti814x_evm.h | 1 -
include/configs/ti816x_evm.h | 1 -
include/configs/ti_armv7_omap.h | 3 -
include/configs/tricorder.h | 1 -
include/configs/trimslice.h | 1 -
include/configs/venice2.h | 1 -
include/configs/ventana.h | 1 -
include/configs/whistler.h | 1 -
include/mmc.h | 2 +-
include/sdhci.h | 131 ++++++++++++++---------------
253 files changed, 654 insertions(+), 374 deletions(-)
create mode 100644 drivers/mmc/sdhci-cadence.c
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-01-11 12:39 ` Jaehoon Chung
@ 2017-01-11 16:28 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2017-01-11 16:28 UTC (permalink / raw)
To: u-boot
On Wed, Jan 11, 2017 at 09:39:48PM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> I fixed the buildman error, and pushed them by force.
> - checked the mips, arm and the other things with buildman.
> - And rebased on latest u-boot/master
>
> Sorry for not checking in more detail
>
> Could you pull these patches on your master branch?
>
> The following changes since commit 04770e6e917b0f766a9496e3f37bcdf2ebb1beb4:
>
> Merge git://git.denx.de/u-boot-dm (2017-01-10 08:19:33 -0500)
>
> are available in the git repository at:
>
> http://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to f401e907fcbc94adff1a8e8097c8f0a5b0aee580:
>
> ARM: sunxi: remove bare default for CONFIG_MMC (2017-01-11 19:40:15 +0900)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170111/f10da5a3/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
[parent not found: <CGME20170103011718epcas5p45970bc6129500aea930bc0e359be6cb4@epcas5p4.samsung.com>]
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
[not found] <CGME20170103011718epcas5p45970bc6129500aea930bc0e359be6cb4@epcas5p4.samsung.com>
@ 2017-01-03 1:17 ` Jaehoon Chung
2017-01-03 1:19 ` Jaehoon Chung
2017-01-05 14:34 ` Tom Rini
0 siblings, 2 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-01-03 1:17 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches on your master branch?
There is a patch relevant to PMIC for PR.
I considered to make the pmic branch, but just included this patch in this PR.
(If you want to split the PR, I will do it.)
If there is an issue, let me know, plz.
The following changes since commit 87f5f5417fc897df0b05826b408f0f4b7d2ee388:
Prepare v2017.01-rc3 (2017-01-02 20:00:55 -0500)
are available in the git repository at:
http://git.denx.de/u-boot-master master
for you to fetch changes up to 4c73d121d86f431221d48ae215f17887f06abff2:
power: change from meaningless value to error number (2017-01-03 10:11:34 +0900)
----------------------------------------------------------------
Jaehoon Chung (12):
mmc: sdhci: disable the 8bit mode when host doesn't support it
mmc: sdhci: add the get_cd callback function in sdhci_ops
mmc: sdhci: remove the unused code about testing Card detect
mmc: pic32_sdhci: move the code to pic32_sdhci.c
mmc: sdhci: remove the SDHCI_QUIRK_NO_CD
mmc: change the set_ios return type from void to int
mmc: s5p_sdhci: add the s5p_set_clock function
mmc: sdhci: move the callback function into sdhci_ops
mmc: sdhci: use the bitops APIs in sdhci.h
mmc: sdhci: remove the SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER
mmc: sdhci: combine the Host controller v3.0 feature into one condition
power: change from meaningless value to error number
Masahiro Yamada (2):
mmc: sdhci-cadence: add Cadence SD4HC support
mmc: uniphier-sd: fix Kconfig dependency
drivers/mmc/Kconfig | 16 ++++++++++++++--
drivers/mmc/Makefile | 1 +
drivers/mmc/dw_mmc.c | 5 ++---
drivers/mmc/pic32_sdhci.c | 15 ++++++++++++++-
drivers/mmc/s5p_sdhci.c | 15 ++++++++++++---
drivers/mmc/sdhci-cadence.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/mmc/sdhci.c | 59 +++++++++++++++++------------------------------------------
drivers/power/axp152.c | 2 +-
drivers/power/axp209.c | 2 +-
drivers/power/battery/bat_trats2.c | 2 +-
drivers/power/exynos-tmu.c | 8 ++++----
drivers/power/fuel_gauge/fg_max17042.c | 4 ++--
drivers/power/mfd/fg_max77693.c | 4 ++--
drivers/power/mfd/pmic_max77693.c | 8 ++++----
drivers/power/palmas.c | 11 +++++++----
drivers/power/pmic/pmic_hi6553.c | 4 ++--
drivers/power/pmic/pmic_max77686.c | 18 +++++++++---------
drivers/power/pmic/pmic_max8997.c | 8 ++++----
drivers/power/power_core.c | 8 ++++----
drivers/power/power_i2c.c | 22 +++++++++++-----------
drivers/power/power_spi.c | 18 ++++++------------
drivers/power/tps6586x.c | 12 ++++++------
include/mmc.h | 2 +-
include/sdhci.h | 131 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------
24 files changed, 315 insertions(+), 185 deletions(-)
create mode 100644 drivers/mmc/sdhci-cadence.c
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-01-03 1:17 ` Jaehoon Chung
@ 2017-01-03 1:19 ` Jaehoon Chung
2017-01-05 14:34 ` Tom Rini
1 sibling, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-01-03 1:19 UTC (permalink / raw)
To: u-boot
On 01/03/2017 10:17 AM, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches on your master branch?
> There is a patch relevant to PMIC for PR.
> I considered to make the pmic branch, but just included this patch in this PR.
> (If you want to split the PR, I will do it.)
> If there is an issue, let me know, plz.
Sorry for late.
>
> The following changes since commit 87f5f5417fc897df0b05826b408f0f4b7d2ee388:
>
> Prepare v2017.01-rc3 (2017-01-02 20:00:55 -0500)
>
> are available in the git repository at:
>
> http://git.denx.de/u-boot-master master
>
> for you to fetch changes up to 4c73d121d86f431221d48ae215f17887f06abff2:
>
> power: change from meaningless value to error number (2017-01-03 10:11:34 +0900)
>
> ----------------------------------------------------------------
> Jaehoon Chung (12):
> mmc: sdhci: disable the 8bit mode when host doesn't support it
> mmc: sdhci: add the get_cd callback function in sdhci_ops
> mmc: sdhci: remove the unused code about testing Card detect
> mmc: pic32_sdhci: move the code to pic32_sdhci.c
> mmc: sdhci: remove the SDHCI_QUIRK_NO_CD
> mmc: change the set_ios return type from void to int
> mmc: s5p_sdhci: add the s5p_set_clock function
> mmc: sdhci: move the callback function into sdhci_ops
> mmc: sdhci: use the bitops APIs in sdhci.h
> mmc: sdhci: remove the SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER
> mmc: sdhci: combine the Host controller v3.0 feature into one condition
> power: change from meaningless value to error number
>
> Masahiro Yamada (2):
> mmc: sdhci-cadence: add Cadence SD4HC support
> mmc: uniphier-sd: fix Kconfig dependency
>
> drivers/mmc/Kconfig | 16 ++++++++++++++--
> drivers/mmc/Makefile | 1 +
> drivers/mmc/dw_mmc.c | 5 ++---
> drivers/mmc/pic32_sdhci.c | 15 ++++++++++++++-
> drivers/mmc/s5p_sdhci.c | 15 ++++++++++++---
> drivers/mmc/sdhci-cadence.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/mmc/sdhci.c | 59 +++++++++++++++++------------------------------------------
> drivers/power/axp152.c | 2 +-
> drivers/power/axp209.c | 2 +-
> drivers/power/battery/bat_trats2.c | 2 +-
> drivers/power/exynos-tmu.c | 8 ++++----
> drivers/power/fuel_gauge/fg_max17042.c | 4 ++--
> drivers/power/mfd/fg_max77693.c | 4 ++--
> drivers/power/mfd/pmic_max77693.c | 8 ++++----
> drivers/power/palmas.c | 11 +++++++----
> drivers/power/pmic/pmic_hi6553.c | 4 ++--
> drivers/power/pmic/pmic_max77686.c | 18 +++++++++---------
> drivers/power/pmic/pmic_max8997.c | 8 ++++----
> drivers/power/power_core.c | 8 ++++----
> drivers/power/power_i2c.c | 22 +++++++++++-----------
> drivers/power/power_spi.c | 18 ++++++------------
> drivers/power/tps6586x.c | 12 ++++++------
> include/mmc.h | 2 +-
> include/sdhci.h | 131 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------
> 24 files changed, 315 insertions(+), 185 deletions(-)
> create mode 100644 drivers/mmc/sdhci-cadence.c
>
> Best Regards,
> Jaehoon Chung
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>
>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-01-03 1:17 ` Jaehoon Chung
2017-01-03 1:19 ` Jaehoon Chung
@ 2017-01-05 14:34 ` Tom Rini
2017-01-06 1:19 ` Jaehoon Chung
1 sibling, 1 reply; 71+ messages in thread
From: Tom Rini @ 2017-01-05 14:34 UTC (permalink / raw)
To: u-boot
On Tue, Jan 03, 2017 at 10:17:18AM +0900, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches on your master branch?
> There is a patch relevant to PMIC for PR.
> I considered to make the pmic branch, but just included this patch in this PR.
> (If you want to split the PR, I will do it.)
> If there is an issue, let me know, plz.
>
> The following changes since commit 87f5f5417fc897df0b05826b408f0f4b7d2ee388:
>
> Prepare v2017.01-rc3 (2017-01-02 20:00:55 -0500)
>
> are available in the git repository at:
>
> http://git.denx.de/u-boot-master master
>
> for you to fetch changes up to 4c73d121d86f431221d48ae215f17887f06abff2:
>
> power: change from meaningless value to error number (2017-01-03 10:11:34 +0900)
>
> ----------------------------------------------------------------
> Jaehoon Chung (12):
> mmc: sdhci: disable the 8bit mode when host doesn't support it
> mmc: sdhci: add the get_cd callback function in sdhci_ops
> mmc: sdhci: remove the unused code about testing Card detect
> mmc: pic32_sdhci: move the code to pic32_sdhci.c
> mmc: sdhci: remove the SDHCI_QUIRK_NO_CD
> mmc: change the set_ios return type from void to int
> mmc: s5p_sdhci: add the s5p_set_clock function
> mmc: sdhci: move the callback function into sdhci_ops
> mmc: sdhci: use the bitops APIs in sdhci.h
> mmc: sdhci: remove the SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER
> mmc: sdhci: combine the Host controller v3.0 feature into one condition
> power: change from meaningless value to error number
>
> Masahiro Yamada (2):
> mmc: sdhci-cadence: add Cadence SD4HC support
> mmc: uniphier-sd: fix Kconfig dependency
Sorry for not replying sooner, but I had thought I had. This is too
much change I think for this late in the release cycle. Sorry.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170105/51b36ab0/attachment.sig>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
2017-01-05 14:34 ` Tom Rini
@ 2017-01-06 1:19 ` Jaehoon Chung
0 siblings, 0 replies; 71+ messages in thread
From: Jaehoon Chung @ 2017-01-06 1:19 UTC (permalink / raw)
To: u-boot
On 01/05/2017 11:34 PM, Tom Rini wrote:
> On Tue, Jan 03, 2017 at 10:17:18AM +0900, Jaehoon Chung wrote:
>
>> Dear Tom,
>>
>> Could you pull these patches on your master branch?
>> There is a patch relevant to PMIC for PR.
>> I considered to make the pmic branch, but just included this patch in this PR.
>> (If you want to split the PR, I will do it.)
>> If there is an issue, let me know, plz.
>>
>> The following changes since commit 87f5f5417fc897df0b05826b408f0f4b7d2ee388:
>>
>> Prepare v2017.01-rc3 (2017-01-02 20:00:55 -0500)
>>
>> are available in the git repository at:
>>
>> http://git.denx.de/u-boot-master master
>>
>> for you to fetch changes up to 4c73d121d86f431221d48ae215f17887f06abff2:
>>
>> power: change from meaningless value to error number (2017-01-03 10:11:34 +0900)
>>
>> ----------------------------------------------------------------
>> Jaehoon Chung (12):
>> mmc: sdhci: disable the 8bit mode when host doesn't support it
>> mmc: sdhci: add the get_cd callback function in sdhci_ops
>> mmc: sdhci: remove the unused code about testing Card detect
>> mmc: pic32_sdhci: move the code to pic32_sdhci.c
>> mmc: sdhci: remove the SDHCI_QUIRK_NO_CD
>> mmc: change the set_ios return type from void to int
>> mmc: s5p_sdhci: add the s5p_set_clock function
>> mmc: sdhci: move the callback function into sdhci_ops
>> mmc: sdhci: use the bitops APIs in sdhci.h
>> mmc: sdhci: remove the SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER
>> mmc: sdhci: combine the Host controller v3.0 feature into one condition
>> power: change from meaningless value to error number
>>
>> Masahiro Yamada (2):
>> mmc: sdhci-cadence: add Cadence SD4HC support
>> mmc: uniphier-sd: fix Kconfig dependency
>
> Sorry for not replying sooner, but I had thought I had. This is too
> much change I think for this late in the release cycle. Sorry.
Ah, Ok. It's my fault for sending PR late.
then I will resend the PR at 2017.03-rc1 time.
Best Regards,
Jaehoon Chung
>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
@ 2016-12-21 22:12 Jaehoon Chung
2016-12-22 2:30 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2016-12-21 22:12 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches on your master branch?
The following changes since commit 0d92f2141ac5ef5c80d13e9501890f914525d43c:
arm64: mvebu: Fix A8K memory mapping and add documentation (2016-12-21 09:52:35 +0100)
are available in the git repository at:
http://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 9c4132b5267b8d58712077c1c231717c76c4d52f:
mmc: Extend dependencies for zynq sdhci (2016-12-22 07:08:52 +0900)
----------------------------------------------------------------
Jaehoon Chung (1):
mmc: spear: remove the entire spear_sdhci.c file
Michal Simek (1):
mmc: Extend dependencies for zynq sdhci
drivers/mmc/Kconfig | 2 +-
drivers/mmc/Makefile | 1 -
drivers/mmc/spear_sdhci.c | 27 ---------------------------
3 files changed, 1 insertion(+), 29 deletions(-)
delete mode 100644 drivers/mmc/spear_sdhci.c
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [GIT PULL] Please pull u-boot-mmc master
@ 2016-12-01 7:01 Jaehoon Chung
2016-12-01 18:17 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Jaehoon Chung @ 2016-12-01 7:01 UTC (permalink / raw)
To: u-boot
Dear Tom,
Could you pull these patches on your master branch?
If there are some problems, let me know, plz.
The following changes since commit 38c4f0bdce5bca8535eadab08ece80dff45ad0ee:
ts4600: Disable CONFIG_DISPLAY_CPUINFO (2016-11-30 19:31:18 -0500)
are available in the git repository at:
http://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 09410c65724dd0a58e01f94a518c80befc413d90:
SPL: mmc: Make spl_mmc_load_image available (2016-12-01 14:06:41 +0900)
----------------------------------------------------------------
Marek Vasut (3):
mmc: Fix warning if debug() is not used
mmc: Tinification of the mmc code
SPL: mmc: Make spl_mmc_load_image available
Seung-Woo Kim (1):
mmc: s5p_sdhci: fix to check proper pinmux id
Tomas Melin (1):
mmc: add bkops-enable command
cmd/Kconfig | 9 +++++++++
cmd/mmc.c | 32 ++++++++++++++++++++++++++++++++
common/spl/spl_mmc.c | 10 +++++++---
drivers/mmc/Kconfig | 15 +++++++++++++++
drivers/mmc/mmc.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
drivers/mmc/mmc_legacy.c | 32 ++++++++++++++++++++++++++++++++
drivers/mmc/s5p_sdhci.c | 2 +-
include/mmc.h | 7 +++++++
include/spl.h | 3 +++
9 files changed, 171 insertions(+), 6 deletions(-)
Best Regards,
Jaehoon Chung
^ permalink raw reply [flat|nested] 71+ messages in thread
end of thread, other threads:[~2018-05-09 1:30 UTC | newest]
Thread overview: 71+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20171023045432epcas2p37d83600c293491c657180667df894ae6@epcas2p3.samsung.com>
2017-10-23 4:54 ` [U-Boot] [GIT PULL] Please pull u-boot-mmc master Jaehoon Chung
2017-10-24 7:58 ` Jaehoon Chung
[not found] <CGME20180508072215epcas1p2cbd07880b5188605fe679ccb248b87eb@epcas1p2.samsung.com>
2018-05-08 7:22 ` Jaehoon Chung
2018-05-09 1:30 ` Tom Rini
[not found] <CGME20180502020320epcas1p1b59166567ba1b0c1bb1c700503bc2d09@epcas1p1.samsung.com>
2018-05-02 2:03 ` Jaehoon Chung
2018-05-02 22:10 ` Tom Rini
[not found] <CGME20180226015859epcas1p30bda4a35316c512366573946d617d484@epcas1p3.samsung.com>
2018-02-26 1:58 ` [U-Boot] [GIT PULL ] " Jaehoon Chung
2018-02-26 15:49 ` Tom Rini
[not found] <CGME20180220035728epcas2p152ee76e870ed334c7e91ef8d7ec0b699@epcas2p1.samsung.com>
2018-02-20 3:57 ` Jaehoon Chung
2018-02-20 13:20 ` Tom Rini
[not found] <CGME20180219112702epcas1p2bb88ec4017cd6b54b2ea2d8801ec3835@epcas1p2.samsung.com>
2018-02-19 11:27 ` [U-Boot] [GIT PULL] " Jaehoon Chung
2018-02-19 14:47 ` Jaehoon Chung
2018-02-19 14:48 ` Tom Rini
2018-02-19 17:00 ` Marek Vasut
[not found] <CGME20180124073159epcas2p18ec97927c7e6c3c04bbe52a8240492fb@epcas2p1.samsung.com>
2018-01-24 7:31 ` Jaehoon Chung
2018-01-25 0:57 ` Jaehoon Chung
2018-01-25 1:44 ` Tom Rini
2018-01-25 2:25 ` Tom Rini
[not found] <CGME20180115023505epcas1p37c76459b4841dd1817c53159477db616@epcas1p3.samsung.com>
2018-01-15 2:35 ` Jaehoon Chung
2018-01-15 13:53 ` Tom Rini
2018-01-16 8:50 ` Jaehoon Chung
[not found] <CGME20171128022004epcas2p150a95af40d2b05cefb9817e1582f58ab@epcas2p1.samsung.com>
2017-11-28 2:20 ` Jaehoon Chung
2017-11-28 12:15 ` Tom Rini
2017-11-28 16:22 ` Jean-Jacques Hiblot
2017-11-30 1:39 ` Jaehoon Chung
2017-11-30 1:35 ` Jaehoon Chung
[not found] <CGME20171127075849epcas2p2e0e6f0ddab3c8c25ddd093353fa52331@epcas2p2.samsung.com>
2017-11-27 7:58 ` Jaehoon Chung
2017-11-27 9:31 ` Jaehoon Chung
[not found] <CGME20170925053103epcas2p190b97c9c8b6b7ce3fa5859b3b662463a@epcas2p1.samsung.com>
2017-09-25 5:31 ` Jaehoon Chung
2017-09-26 12:17 ` Tom Rini
[not found] <CGME20170818053954epcas1p232acd1af824a992adc6aaa44c1e7a907@epcas1p2.samsung.com>
2017-08-18 5:39 ` Jaehoon Chung
2017-08-18 6:35 ` Jaehoon Chung
[not found] <CGME20170731025907epcas1p1fb9b643ec83cc77b12ab0d8550755be7@epcas1p1.samsung.com>
2017-07-31 2:59 ` Jaehoon Chung
2017-07-31 11:27 ` Tom Rini
2017-08-01 2:48 ` Jaehoon Chung
[not found] <CGME20170719101711epcas5p1e73a75ea548997594e3f5ba23da0e565@epcas5p1.samsung.com>
2017-07-19 10:17 ` Jaehoon Chung
2017-07-21 15:48 ` Tom Rini
[not found] <CGME20170630034821epcas1p193104bec121303c6897391e690a943f3@epcas1p1.samsung.com>
2017-06-30 3:48 ` Jaehoon Chung
2017-06-30 10:48 ` Tom Rini
2017-06-30 11:59 ` Jaehoon Chung
[not found] <CGME20170609112846epcas1p1db6eece58f727344e6789e434afa09c9@epcas1p1.samsung.com>
2017-06-09 11:28 ` Jaehoon Chung
2017-06-10 22:00 ` Tom Rini
[not found] <CGME20170529083151epcas5p1d26d3ff44c53bba61cc380bfd78a910f@epcas5p1.samsung.com>
2017-05-29 8:31 ` Jaehoon Chung
2017-05-31 2:06 ` Tom Rini
[not found] <CGME20170515050639epcas1p3d4f0aca8a724070fbe556078835f2e61@epcas1p3.samsung.com>
2017-05-15 5:06 ` Jaehoon Chung
2017-05-15 6:18 ` Jaehoon Chung
[not found] <CGME20170414065148epcas5p1f02fb69f9925f4b4a7bf176a76e447f7@epcas5p1.samsung.com>
2017-04-14 6:51 ` Jaehoon Chung
2017-04-14 21:09 ` Tom Rini
[not found] <CGME20170330052139epcas5p1e95ad9a80664dd907de79e6c2ad05763@epcas5p1.samsung.com>
2017-03-30 5:21 ` Jaehoon Chung
2017-04-04 20:00 ` Tom Rini
[not found] <CGME20170321121100epcas5p19374186df9de3d740bceb6ba2d97f8c3@epcas5p1.samsung.com>
2017-03-21 12:11 ` Jaehoon Chung
2017-03-22 0:51 ` Tom Rini
[not found] <CGME20170209115016epcas5p2c78275706402e633c0da384936a1692f@epcas5p2.samsung.com>
2017-02-09 11:50 ` Jaehoon Chung
2017-02-09 19:50 ` Tom Rini
[not found] <CGME20170131232440epcas5p2ff99c09928cf938f10d640785b25b911@epcas5p2.samsung.com>
2017-01-31 23:24 ` Jaehoon Chung
2017-02-01 21:33 ` Tom Rini
[not found] <CGME20170124093735epcas5p2696f062ee887233d1eacc5319f25b156@epcas5p2.samsung.com>
2017-01-24 9:37 ` Jaehoon Chung
2017-01-25 2:15 ` Tom Rini
[not found] <CGME20170110054802epcas5p47773e1927ecb61adccb970ff738c45a2@epcas5p4.samsung.com>
2017-01-10 5:48 ` Jaehoon Chung
2017-01-10 17:32 ` Tom Rini
2017-01-11 2:11 ` Jaehoon Chung
2017-01-11 12:39 ` Jaehoon Chung
2017-01-11 16:28 ` Tom Rini
[not found] <CGME20170103011718epcas5p45970bc6129500aea930bc0e359be6cb4@epcas5p4.samsung.com>
2017-01-03 1:17 ` Jaehoon Chung
2017-01-03 1:19 ` Jaehoon Chung
2017-01-05 14:34 ` Tom Rini
2017-01-06 1:19 ` Jaehoon Chung
2016-12-21 22:12 Jaehoon Chung
2016-12-22 2:30 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2016-12-01 7:01 Jaehoon Chung
2016-12-01 18:17 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.