From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dinh Nguyen <dinguyen@kernel.org>
Date: Mon, 16 Oct 2017 07:39:05 -0500
Subject: [U-Boot] [PATCH v3 03/20] arm: socfpga: Add Arria 10 SoCFPGA
 programming interface
In-Reply-To: <1507882137-27841-4-git-send-email-tien.fong.chee@intel.com>
References: <1507882137-27841-1-git-send-email-tien.fong.chee@intel.com>
 <1507882137-27841-4-git-send-email-tien.fong.chee@intel.com>
Message-ID: <d9eb5819-9745-99da-4a58-ecbcb03bd4e5@kernel.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Please run get_maintainer on this patch. I think you need to include a
few more people.

On 10/13/2017 03:08 AM, tien.fong.chee at intel.com wrote:
> From: Tien Fong Chee <tien.fong.chee@intel.com>
> 
> Add code necessary into the FPGA driver framework in U-Boot
> so it can be used via the 'fpga' command for programing Arria 10
> SoCFPGA.
> 
> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
> ---
>  cmd/fpga.c            |  2 +-
>  drivers/fpga/altera.c | 40 ++++++++++++++++++++++++++++++++--------
>  drivers/fpga/fpga.c   |  8 ++++++++
>  include/fpga.h        |  2 ++
>  4 files changed, 43 insertions(+), 9 deletions(-)
> 
> diff --git a/cmd/fpga.c b/cmd/fpga.c
> index ac6f504..3cb0bcd 100644
> --- a/cmd/fpga.c
> +++ b/cmd/fpga.c
> @@ -363,7 +363,7 @@ U_BOOT_CMD(fpga, 6, 1, do_fpga,
>  	   "(Xilinx only)\n"
>  #endif
>  #if defined(CONFIG_CMD_FPGA_LOADFS)
> -	   "Load device from filesystem (FAT by default) (Xilinx only)\n"
> +	   "Load device from filesystem (FAT by default)\n
>  	   "  loadfs [dev] [address] [image size] [blocksize] <interface>\n"
>  	   "        [<dev[:part]>] <filename>\n"
>  #endif
> diff --git a/drivers/fpga/altera.c b/drivers/fpga/altera.c
> index 135a357..a03e835 100644
> --- a/drivers/fpga/altera.c
> +++ b/drivers/fpga/altera.c
> @@ -23,25 +23,31 @@ static const struct altera_fpga {
>  	enum altera_family	family;
>  	const char		*name;
>  	int			(*load)(Altera_desc *, const void *, size_t);
> +	int (*loadfs)(Altera_desc *, const void *, size_t, fpga_fs_info *);
>  	int			(*dump)(Altera_desc *, const void *, size_t);
>  	int			(*info)(Altera_desc *);
>  } altera_fpga[] = {
>  #if defined(CONFIG_FPGA_ACEX1K)
> -	{ Altera_ACEX1K, "ACEX1K", ACEX1K_load, ACEX1K_dump, ACEX1K_info },
> -	{ Altera_CYC2,   "ACEX1K", ACEX1K_load, ACEX1K_dump, ACEX1K_info },
> +	{ Altera_ACEX1K, "ACEX1K", ACEX1K_load, NULL, ACEX1K_dump,
> +	 ACEX1K_info },
> +	{ Altera_CYC2,   "ACEX1K", ACEX1K_load, NULL, ACEX1K_dump,
> +	 ACEX1K_info },
>  #elif defined(CONFIG_FPGA_CYCLON2)
> -	{ Altera_ACEX1K, "CycloneII", CYC2_load, CYC2_dump, CYC2_info },
> -	{ Altera_CYC2,   "CycloneII", CYC2_load, CYC2_dump, CYC2_info },
> +	{ Altera_ACEX1K, "CycloneII", CYC2_load, NULL, CYC2_dump, CYC2_info },
> +	{ Altera_CYC2,   "CycloneII", CYC2_load, NULL, CYC2_dump, CYC2_info },
>  #endif
>  #if defined(CONFIG_FPGA_STRATIX_II)
> -	{ Altera_StratixII, "StratixII", StratixII_load,
> +	{ Altera_StratixII, "StratixII", StratixII_load, NULL,
>  	  StratixII_dump, StratixII_info },
>  #endif
>  #if defined(CONFIG_FPGA_STRATIX_V)
> -	{ Altera_StratixV, "StratixV", stratixv_load, NULL, NULL },
> +	{ Altera_StratixV, "StratixV", stratixv_load, NULL, NULL, NULL },

What is the purpose of the above 3 changes if this patch is for Arria10?

Dinh