[PATCH v2 0/4] hwmon: (adt7470) Clean up

[PATCH v2 0/4] hwmon: (adt7470) Clean up

[Chris Packham]

This does some cleanup of the adt7470. The major benefit is the added error
handling. The volume of code decreases a little but it's kind of a wash between
the removal of attribute handling code vs the addition of code to drive the
hwmon core.

Chris Packham (4):
  hwmon: (adt7470) Fix some style issues
  hwmon: (adt7470) Convert to use regmap
  hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API
  hwmon: (adt7470) Use standard update_interval property

 drivers/hwmon/adt7470.c | 1133 +++++++++++++++++++--------------------
 1 file changed, 552 insertions(+), 581 deletions(-)

-- 
2.32.0

[PATCH v2 1/4] hwmon: (adt7470) Fix some style issues

[Chris Packham]

In preparation for the changes that follow fix up some existing style
issues.
Specifically:
- add blank line between variable declaration and code
- use strscpy instead of strlcpy
- remove unnecessary braces

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Changes in v2:
- new

 drivers/hwmon/adt7470.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 2e8feacccf84..3358ec58b977 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -174,6 +174,7 @@ struct adt7470_data {
 static inline int adt7470_read_word_data(struct i2c_client *client, u8 reg)
 {
 	u16 foo;
+
 	foo = i2c_smbus_read_byte_data(client, reg);
 	foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
 	return foo;
@@ -1282,7 +1283,7 @@ static int adt7470_detect(struct i2c_client *client,
 	if (revision != ADT7470_REVISION)
 		return -ENODEV;
 
-	strlcpy(info->type, "adt7470", I2C_NAME_SIZE);
+	strscpy(info->type, "adt7470", I2C_NAME_SIZE);
 
 	return 0;
 }
@@ -1331,9 +1332,8 @@ static int adt7470_probe(struct i2c_client *client)
 
 	data->auto_update = kthread_run(adt7470_update_thread, client, "%s",
 					dev_name(hwmon_dev));
-	if (IS_ERR(data->auto_update)) {
+	if (IS_ERR(data->auto_update))
 		return PTR_ERR(data->auto_update);
-	}
 
 	return 0;
 }
-- 
2.32.0

[PATCH v2 2/4] hwmon: (adt7470) Convert to use regmap

[Chris Packham]

Convert the adt7470 to using regmap which allows better error handling.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Change in v2:
- split regmap and devm_hwmon_device_register_with_info into separate
  patches to aid review

 drivers/hwmon/adt7470.c | 430 +++++++++++++++++++++++-----------------
 1 file changed, 249 insertions(+), 181 deletions(-)

diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 3358ec58b977..ad3e46667be8 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/log2.h>
 #include <linux/kthread.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/util_macros.h>
 
@@ -35,7 +36,10 @@ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END };
 #define ADT7470_REG_PWM_MAX_BASE_ADDR		0x38
 #define ADT7470_REG_PWM_MAX_MAX_ADDR		0x3B
 #define ADT7470_REG_CFG				0x40
+#define		ADT7470_STRT_MASK		0x01
+#define		ADT7470_TEST_MASK		0x02
 #define		ADT7470_FSPD_MASK		0x04
+#define		ADT7470_T05_STB_MASK		0x80
 #define ADT7470_REG_ALARM1			0x41
 #define		ADT7470_R1T_ALARM		0x01
 #define		ADT7470_R2T_ALARM		0x02
@@ -137,7 +141,7 @@ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END };
 #define ADT7470_FREQ_SHIFT	4
 
 struct adt7470_data {
-	struct i2c_client	*client;
+	struct regmap		*regmap;
 	struct mutex		lock;
 	char			sensors_valid;
 	char			limits_valid;
@@ -171,52 +175,76 @@ struct adt7470_data {
  * 16-bit registers on the ADT7470 are low-byte first.  The data sheet says
  * that the low byte must be read before the high byte.
  */
-static inline int adt7470_read_word_data(struct i2c_client *client, u8 reg)
+static inline int adt7470_read_word_data(struct adt7470_data *data, unsigned int reg,
+					 unsigned int *val)
 {
-	u16 foo;
+	u8 regval[2];
+	int err;
 
-	foo = i2c_smbus_read_byte_data(client, reg);
-	foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
-	return foo;
+	err = regmap_bulk_read(data->regmap, reg, &regval, 2);
+	if (err < 0)
+		return err;
+
+	*val = regval[0] | (regval[1] << 8);
+
+	return 0;
 }
 
-static inline int adt7470_write_word_data(struct i2c_client *client, u8 reg,
-					  u16 value)
+static inline int adt7470_write_word_data(struct adt7470_data *data, unsigned int reg,
+					  unsigned int val)
 {
-	return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
-	       || i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+	u8 regval[2];
+
+	regval[0] = val & 0xFF;
+	regval[1] = val >> 8;
+
+	return regmap_bulk_write(data->regmap, reg, &regval, 2);
 }
 
 /* Probe for temperature sensors.  Assumes lock is held */
-static int adt7470_read_temperatures(struct i2c_client *client,
-				     struct adt7470_data *data)
+static int adt7470_read_temperatures(struct adt7470_data *data)
 {
 	unsigned long res;
+	unsigned int pwm_cfg[2];
+	int err;
 	int i;
-	u8 cfg, pwm[4], pwm_cfg[2];
+	u8 pwm[ADT7470_FAN_COUNT];
 
 	/* save pwm[1-4] config register */
-	pwm_cfg[0] = i2c_smbus_read_byte_data(client, ADT7470_REG_PWM_CFG(0));
-	pwm_cfg[1] = i2c_smbus_read_byte_data(client, ADT7470_REG_PWM_CFG(2));
+	err = regmap_read(data->regmap, ADT7470_REG_PWM_CFG(0), &pwm_cfg[0]);
+	if (err < 0)
+		return err;
+	err = regmap_read(data->regmap, ADT7470_REG_PWM_CFG(2), &pwm_cfg[1]);
+	if (err < 0)
+		return err;
 
 	/* set manual pwm to whatever it is set to now */
-	for (i = 0; i < ADT7470_FAN_COUNT; i++)
-		pwm[i] = i2c_smbus_read_byte_data(client, ADT7470_REG_PWM(i));
+	err = regmap_bulk_read(data->regmap, ADT7470_REG_PWM(0), &pwm[0],
+			       ADT7470_PWM_COUNT);
+	if (err < 0)
+		return err;
 
 	/* put pwm in manual mode */
-	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(0),
-		pwm_cfg[0] & ~(ADT7470_PWM_AUTO_MASK));
-	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(2),
-		pwm_cfg[1] & ~(ADT7470_PWM_AUTO_MASK));
+	err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(0),
+				 ADT7470_PWM_AUTO_MASK, 0);
+	if (err < 0)
+		return err;
+	err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(2),
+				 ADT7470_PWM_AUTO_MASK, 0);
+	if (err < 0)
+		return err;
 
 	/* write pwm control to whatever it was */
-	for (i = 0; i < ADT7470_FAN_COUNT; i++)
-		i2c_smbus_write_byte_data(client, ADT7470_REG_PWM(i), pwm[i]);
+	err = regmap_bulk_write(data->regmap, ADT7470_REG_PWM(0), &pwm[0],
+				ADT7470_PWM_COUNT);
+	if (err < 0)
+		return err;
 
 	/* start reading temperature sensors */
-	cfg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
-	cfg |= 0x80;
-	i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, cfg);
+	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG,
+				 ADT7470_T05_STB_MASK, ADT7470_T05_STB_MASK);
+	if (err < 0)
+		return err;
 
 	/* Delay is 200ms * number of temp sensors. */
 	res = msleep_interruptible((data->num_temp_sensors >= 0 ?
@@ -224,26 +252,31 @@ static int adt7470_read_temperatures(struct i2c_client *client,
 				    TEMP_COLLECTION_TIME));
 
 	/* done reading temperature sensors */
-	cfg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
-	cfg &= ~0x80;
-	i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, cfg);
+	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG,
+				 ADT7470_T05_STB_MASK, 0);
+	if (err < 0)
+		return err;
 
 	/* restore pwm[1-4] config registers */
-	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(0), pwm_cfg[0]);
-	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(2), pwm_cfg[1]);
+	err = regmap_write(data->regmap, ADT7470_REG_PWM_CFG(0), pwm_cfg[0]);
+	if (err < 0)
+		return err;
+	err = regmap_write(data->regmap, ADT7470_REG_PWM_CFG(2), pwm_cfg[1]);
+	if (err < 0)
+		return err;
 
-	if (res) {
-		pr_err("ha ha, interrupted\n");
+	if (res)
 		return -EAGAIN;
-	}
 
 	/* Only count fans if we have to */
 	if (data->num_temp_sensors >= 0)
 		return 0;
 
+	err = regmap_bulk_read(data->regmap, ADT7470_TEMP_REG(0), &data->temp[0],
+			       ADT7470_TEMP_COUNT);
+	if (err < 0)
+		return err;
 	for (i = 0; i < ADT7470_TEMP_COUNT; i++) {
-		data->temp[i] = i2c_smbus_read_byte_data(client,
-						ADT7470_TEMP_REG(i));
 		if (data->temp[i])
 			data->num_temp_sensors = i + 1;
 	}
@@ -258,7 +291,7 @@ static int adt7470_update_thread(void *p)
 
 	while (!kthread_should_stop()) {
 		mutex_lock(&data->lock);
-		adt7470_read_temperatures(client, data);
+		adt7470_read_temperatures(data);
 		mutex_unlock(&data->lock);
 
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -273,89 +306,116 @@ static int adt7470_update_thread(void *p)
 
 static int adt7470_update_sensors(struct adt7470_data *data)
 {
-	struct i2c_client *client = data->client;
-	u8 cfg;
+	unsigned int val;
+	int err;
 	int i;
 
 	if (!data->temperatures_probed)
-		adt7470_read_temperatures(client, data);
+		err = adt7470_read_temperatures(data);
 	else
-		for (i = 0; i < ADT7470_TEMP_COUNT; i++)
-			data->temp[i] = i2c_smbus_read_byte_data(client,
-						ADT7470_TEMP_REG(i));
+		err = regmap_bulk_read(data->regmap, ADT7470_TEMP_REG(0), &data->temp[0],
+				       ADT7470_TEMP_COUNT);
+	if (err < 0)
+		return err;
 
-	for (i = 0; i < ADT7470_FAN_COUNT; i++)
-		data->fan[i] = adt7470_read_word_data(client,
-						ADT7470_REG_FAN(i));
-
-	for (i = 0; i < ADT7470_PWM_COUNT; i++) {
-		int reg;
-		int reg_mask;
-
-		data->pwm[i] = i2c_smbus_read_byte_data(client,
-						ADT7470_REG_PWM(i));
-
-		if (i % 2)
-			reg_mask = ADT7470_PWM2_AUTO_MASK;
-		else
-			reg_mask = ADT7470_PWM1_AUTO_MASK;
-
-		reg = ADT7470_REG_PWM_CFG(i);
-		if (i2c_smbus_read_byte_data(client, reg) & reg_mask)
-			data->pwm_automatic[i] = 1;
-		else
-			data->pwm_automatic[i] = 0;
-
-		reg = ADT7470_REG_PWM_AUTO_TEMP(i);
-		cfg = i2c_smbus_read_byte_data(client, reg);
-		if (!(i % 2))
-			data->pwm_auto_temp[i] = cfg >> 4;
-		else
-			data->pwm_auto_temp[i] = cfg & 0xF;
+	for (i = 0; i < ADT7470_FAN_COUNT; i++) {
+		err = adt7470_read_word_data(data, ADT7470_REG_FAN(i), &val);
+		if (err < 0)
+			return err;
+		data->fan[i] =	val;
 	}
 
-	if (i2c_smbus_read_byte_data(client, ADT7470_REG_CFG) &
-	    ADT7470_FSPD_MASK)
-		data->force_pwm_max = 1;
-	else
-		data->force_pwm_max = 0;
+	err = regmap_bulk_read(data->regmap, ADT7470_REG_PWM(0), &data->pwm[0], ADT7470_PWM_COUNT);
+	if (err < 0)
+		return err;
 
-	data->alarm = i2c_smbus_read_byte_data(client, ADT7470_REG_ALARM1);
-	if (data->alarm & ADT7470_OOL_ALARM)
-		data->alarm |= ALARM2(i2c_smbus_read_byte_data(client,
-							ADT7470_REG_ALARM2));
-	data->alarms_mask = adt7470_read_word_data(client,
-						   ADT7470_REG_ALARM1_MASK);
+	for (i = 0; i < ADT7470_PWM_COUNT; i++) {
+		unsigned int mask;
+
+		if (i % 2)
+			mask = ADT7470_PWM2_AUTO_MASK;
+		else
+			mask = ADT7470_PWM1_AUTO_MASK;
+
+		err = regmap_read(data->regmap, ADT7470_REG_PWM_CFG(i), &val);
+		if (err < 0)
+			return err;
+		data->pwm_automatic[i] = !!(val & mask);
+
+		err = regmap_read(data->regmap, ADT7470_REG_PWM_AUTO_TEMP(i), &val);
+		if (err < 0)
+			return err;
+		if (!(i % 2))
+			data->pwm_auto_temp[i] = val >> 4;
+		else
+			data->pwm_auto_temp[i] = val & 0xF;
+	}
+
+	err = regmap_read(data->regmap, ADT7470_REG_CFG, &val);
+	if (err < 0)
+		return err;
+	data->force_pwm_max = !!(val & ADT7470_FSPD_MASK);
+
+	err = regmap_read(data->regmap, ADT7470_REG_ALARM1, &val);
+	if (err < 0)
+		return err;
+	data->alarm = val;
+	if (data->alarm & ADT7470_OOL_ALARM) {
+		err = regmap_read(data->regmap, ADT7470_REG_ALARM2, &val);
+		if (err < 0)
+			return err;
+		data->alarm |= ALARM2(val);
+	}
+
+	err = adt7470_read_word_data(data, ADT7470_REG_ALARM1_MASK, &val);
+	if (err < 0)
+		return err;
+	data->alarms_mask = val;
 
 	return 0;
 }
 
 static int adt7470_update_limits(struct adt7470_data *data)
 {
-	struct i2c_client *client = data->client;
+	unsigned int val;
+	int err;
 	int i;
 
 	for (i = 0; i < ADT7470_TEMP_COUNT; i++) {
-		data->temp_min[i] = i2c_smbus_read_byte_data(client,
-						ADT7470_TEMP_MIN_REG(i));
-		data->temp_max[i] = i2c_smbus_read_byte_data(client,
-						ADT7470_TEMP_MAX_REG(i));
+		err = regmap_read(data->regmap, ADT7470_TEMP_MIN_REG(i), &val);
+		if (err < 0)
+			return err;
+		data->temp_min[i] = (s8)val;
+		err = regmap_read(data->regmap, ADT7470_TEMP_MAX_REG(i), &val);
+		if (err < 0)
+			return err;
+		data->temp_max[i] = (s8)val;
 	}
 
 	for (i = 0; i < ADT7470_FAN_COUNT; i++) {
-		data->fan_min[i] = adt7470_read_word_data(client,
-						ADT7470_REG_FAN_MIN(i));
-		data->fan_max[i] = adt7470_read_word_data(client,
-						ADT7470_REG_FAN_MAX(i));
+		err = adt7470_read_word_data(data, ADT7470_REG_FAN_MIN(i), &val);
+		if (err < 0)
+			return err;
+		data->fan_min[i] = val;
+		err = adt7470_read_word_data(data, ADT7470_REG_FAN_MAX(i), &val);
+		if (err < 0)
+			return err;
+		data->fan_max[i] = val;
 	}
 
 	for (i = 0; i < ADT7470_PWM_COUNT; i++) {
-		data->pwm_max[i] = i2c_smbus_read_byte_data(client,
-						ADT7470_REG_PWM_MAX(i));
-		data->pwm_min[i] = i2c_smbus_read_byte_data(client,
-						ADT7470_REG_PWM_MIN(i));
-		data->pwm_tmin[i] = i2c_smbus_read_byte_data(client,
-						ADT7470_REG_PWM_TMIN(i));
+		err = regmap_read(data->regmap, ADT7470_REG_PWM_MAX(i), &val);
+		if (err < 0)
+			return err;
+		data->pwm_max[i] = val;
+		err = regmap_read(data->regmap, ADT7470_REG_PWM_MIN(i), &val);
+		if (err < 0)
+			return err;
+		data->pwm_min[i] = val;
+		err = regmap_read(data->regmap, ADT7470_REG_PWM_TMIN(i), &val);
+		if (err < 0)
+			return err;
+		data->pwm_tmin[i] = (s8)val;
 	}
 
 	return 0;
@@ -491,8 +551,8 @@ static ssize_t temp_min_store(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	long temp;
+	int err;
 
 	if (kstrtol(buf, 10, &temp))
 		return -EINVAL;
@@ -502,11 +562,11 @@ static ssize_t temp_min_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	data->temp_min[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7470_TEMP_MIN_REG(attr->index),
+	err = regmap_write(data->regmap, ADT7470_TEMP_MIN_REG(attr->index),
 				  temp);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t temp_max_show(struct device *dev,
@@ -527,8 +587,8 @@ static ssize_t temp_max_store(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	long temp;
+	int err;
 
 	if (kstrtol(buf, 10, &temp))
 		return -EINVAL;
@@ -538,11 +598,10 @@ static ssize_t temp_max_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	data->temp_max[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7470_TEMP_MAX_REG(attr->index),
-				  temp);
+	err = regmap_write(data->regmap, ADT7470_TEMP_MAX_REG(attr->index), temp);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
@@ -575,6 +634,7 @@ static ssize_t alarm_mask_store(struct device *dev,
 {
 	struct adt7470_data *data = dev_get_drvdata(dev);
 	long mask;
+	int err;
 
 	if (kstrtoul(buf, 0, &mask))
 		return -EINVAL;
@@ -584,10 +644,10 @@ static ssize_t alarm_mask_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	data->alarms_mask = mask;
-	adt7470_write_word_data(data->client, ADT7470_REG_ALARM1_MASK, mask);
+	err = adt7470_write_word_data(data, ADT7470_REG_ALARM1_MASK, mask);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t fan_max_show(struct device *dev,
@@ -612,8 +672,8 @@ static ssize_t fan_max_store(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	long temp;
+	int err;
 
 	if (kstrtol(buf, 10, &temp) || !temp)
 		return -EINVAL;
@@ -623,10 +683,10 @@ static ssize_t fan_max_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	data->fan_max[attr->index] = temp;
-	adt7470_write_word_data(client, ADT7470_REG_FAN_MAX(attr->index), temp);
+	err = adt7470_write_word_data(data, ADT7470_REG_FAN_MAX(attr->index), temp);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t fan_min_show(struct device *dev,
@@ -651,8 +711,8 @@ static ssize_t fan_min_store(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	long temp;
+	int err;
 
 	if (kstrtol(buf, 10, &temp) || !temp)
 		return -EINVAL;
@@ -662,10 +722,10 @@ static ssize_t fan_min_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	data->fan_min[attr->index] = temp;
-	adt7470_write_word_data(client, ADT7470_REG_FAN_MIN(attr->index), temp);
+	err = adt7470_write_word_data(data, ADT7470_REG_FAN_MIN(attr->index), temp);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t fan_show(struct device *dev, struct device_attribute *devattr,
@@ -700,24 +760,20 @@ static ssize_t force_pwm_max_store(struct device *dev,
 				   const char *buf, size_t count)
 {
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	long temp;
-	u8 reg;
+	int err;
 
 	if (kstrtol(buf, 10, &temp))
 		return -EINVAL;
 
 	mutex_lock(&data->lock);
 	data->force_pwm_max = temp;
-	reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
-	if (temp)
-		reg |= ADT7470_FSPD_MASK;
-	else
-		reg &= ~ADT7470_FSPD_MASK;
-	i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, reg);
+	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG,
+				 ADT7470_FSPD_MASK,
+				 temp ? ADT7470_FSPD_MASK : 0);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t pwm_show(struct device *dev, struct device_attribute *devattr,
@@ -737,8 +793,8 @@ static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	long temp;
+	int err;
 
 	if (kstrtol(buf, 10, &temp))
 		return -EINVAL;
@@ -747,10 +803,10 @@ static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr,
 
 	mutex_lock(&data->lock);
 	data->pwm[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM(attr->index), temp);
+	err = regmap_write(data->regmap, ADT7470_REG_PWM(attr->index), temp);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 /* These are the valid PWM frequencies to the nearest Hz */
@@ -762,13 +818,20 @@ static ssize_t pwm1_freq_show(struct device *dev,
 			      struct device_attribute *devattr, char *buf)
 {
 	struct adt7470_data *data = adt7470_update_device(dev);
-	unsigned char cfg_reg_1;
-	unsigned char cfg_reg_2;
+	unsigned int cfg_reg_1, cfg_reg_2;
 	int index;
+	int err;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
 
 	mutex_lock(&data->lock);
-	cfg_reg_1 = i2c_smbus_read_byte_data(data->client, ADT7470_REG_CFG);
-	cfg_reg_2 = i2c_smbus_read_byte_data(data->client, ADT7470_REG_CFG_2);
+	err = regmap_read(data->regmap, ADT7470_REG_CFG, &cfg_reg_1);
+	if (err < 0)
+		goto out;
+	err = regmap_read(data->regmap, ADT7470_REG_CFG_2, &cfg_reg_2);
+	if (err < 0)
+		goto out;
 	mutex_unlock(&data->lock);
 
 	index = (cfg_reg_2 & ADT7470_FREQ_MASK) >> ADT7470_FREQ_SHIFT;
@@ -778,6 +841,10 @@ static ssize_t pwm1_freq_show(struct device *dev,
 		index = ARRAY_SIZE(adt7470_freq_map) - 1;
 
 	return scnprintf(buf, PAGE_SIZE, "%d\n", adt7470_freq_map[index]);
+
+out:
+	mutex_unlock(&data->lock);
+	return err;
 }
 
 static ssize_t pwm1_freq_store(struct device *dev,
@@ -785,11 +852,10 @@ static ssize_t pwm1_freq_store(struct device *dev,
 			       const char *buf, size_t count)
 {
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	long freq;
 	int index;
 	int low_freq = ADT7470_CFG_LF;
-	unsigned char val;
+	int err;
 
 	if (kstrtol(buf, 10, &freq))
 		return -EINVAL;
@@ -805,16 +871,19 @@ static ssize_t pwm1_freq_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	/* Configuration Register 1 */
-	val = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
-	i2c_smbus_write_byte_data(client, ADT7470_REG_CFG,
-				  (val & ~ADT7470_CFG_LF) | low_freq);
+	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG,
+				 ADT7470_CFG_LF, low_freq);
+	if (err < 0)
+		goto out;
+
 	/* Configuration Register 2 */
-	val = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG_2);
-	i2c_smbus_write_byte_data(client, ADT7470_REG_CFG_2,
-		(val & ~ADT7470_FREQ_MASK) | (index << ADT7470_FREQ_SHIFT));
+	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG_2,
+				 ADT7470_FREQ_MASK,
+				 index << ADT7470_FREQ_SHIFT);
+out:
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t pwm_max_show(struct device *dev,
@@ -835,8 +904,8 @@ static ssize_t pwm_max_store(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	long temp;
+	int err;
 
 	if (kstrtol(buf, 10, &temp))
 		return -EINVAL;
@@ -845,11 +914,11 @@ static ssize_t pwm_max_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	data->pwm_max[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_MAX(attr->index),
-				  temp);
+	err = regmap_write(data->regmap, ADT7470_REG_PWM_MAX(attr->index),
+			   temp);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t pwm_min_show(struct device *dev,
@@ -870,8 +939,8 @@ static ssize_t pwm_min_store(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	long temp;
+	int err;
 
 	if (kstrtol(buf, 10, &temp))
 		return -EINVAL;
@@ -880,11 +949,11 @@ static ssize_t pwm_min_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	data->pwm_min[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_MIN(attr->index),
-				  temp);
+	err = regmap_write(data->regmap, ADT7470_REG_PWM_MIN(attr->index),
+			   temp);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t pwm_tmax_show(struct device *dev,
@@ -918,8 +987,8 @@ static ssize_t pwm_tmin_store(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	long temp;
+	int err;
 
 	if (kstrtol(buf, 10, &temp))
 		return -EINVAL;
@@ -929,11 +998,11 @@ static ssize_t pwm_tmin_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	data->pwm_tmin[attr->index] = temp;
-	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_TMIN(attr->index),
-				  temp);
+	err = regmap_write(data->regmap, ADT7470_REG_PWM_TMIN(attr->index),
+			   temp);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t pwm_auto_show(struct device *dev,
@@ -954,11 +1023,9 @@ static ssize_t pwm_auto_store(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
-	int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index);
 	int pwm_auto_reg_mask;
 	long temp;
-	u8 reg;
+	int err;
 
 	if (kstrtol(buf, 10, &temp))
 		return -EINVAL;
@@ -974,15 +1041,12 @@ static ssize_t pwm_auto_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	data->pwm_automatic[attr->index] = temp;
-	reg = i2c_smbus_read_byte_data(client, pwm_auto_reg);
-	if (temp)
-		reg |= pwm_auto_reg_mask;
-	else
-		reg &= ~pwm_auto_reg_mask;
-	i2c_smbus_write_byte_data(client, pwm_auto_reg, reg);
+	err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(attr->index),
+				 pwm_auto_reg_mask,
+				 temp ? pwm_auto_reg_mask : 0);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t pwm_auto_temp_show(struct device *dev,
@@ -1017,10 +1081,10 @@ static ssize_t pwm_auto_temp_store(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index);
+	unsigned int mask, val;
 	long temp;
-	u8 reg;
+	int err;
 
 	if (kstrtol(buf, 10, &temp))
 		return -EINVAL;
@@ -1031,20 +1095,19 @@ static ssize_t pwm_auto_temp_store(struct device *dev,
 
 	mutex_lock(&data->lock);
 	data->pwm_automatic[attr->index] = temp;
-	reg = i2c_smbus_read_byte_data(client, pwm_auto_reg);
 
 	if (!(attr->index % 2)) {
-		reg &= 0xF;
-		reg |= (temp << 4) & 0xF0;
+		mask = 0xF0;
+		val = (temp << 4) & 0xF0;
 	} else {
-		reg &= 0xF0;
-		reg |= temp & 0xF;
+		mask = 0x0F;
+		val = temp & 0x0F;
 	}
 
-	i2c_smbus_write_byte_data(client, pwm_auto_reg, reg);
+	err = regmap_update_bits(data->regmap, pwm_auto_reg, mask, val);
 	mutex_unlock(&data->lock);
 
-	return count;
+	return err < 0 ? err : count;
 }
 
 static ssize_t alarm_show(struct device *dev,
@@ -1053,6 +1116,9 @@ static ssize_t alarm_show(struct device *dev,
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = adt7470_update_device(dev);
 
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
 	if (data->alarm & attr->index)
 		return sprintf(buf, "1\n");
 	else
@@ -1288,23 +1354,19 @@ static int adt7470_detect(struct i2c_client *client,
 	return 0;
 }
 
-static void adt7470_init_client(struct i2c_client *client)
-{
-	int reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
-
-	if (reg < 0) {
-		dev_err(&client->dev, "cannot read configuration register\n");
-	} else {
-		/* start monitoring (and do a self-test) */
-		i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, reg | 3);
-	}
-}
+static const struct regmap_config adt7470_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.use_single_read = true,
+	.use_single_write = true,
+};
 
 static int adt7470_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct adt7470_data *data;
 	struct device *hwmon_dev;
+	int err;
 
 	data = devm_kzalloc(dev, sizeof(struct adt7470_data), GFP_KERNEL);
 	if (!data)
@@ -1312,15 +1374,21 @@ static int adt7470_probe(struct i2c_client *client)
 
 	data->num_temp_sensors = -1;
 	data->auto_update_interval = AUTO_UPDATE_INTERVAL;
+	data->regmap = devm_regmap_init_i2c(client, &adt7470_regmap_config);
+	if (IS_ERR(data->regmap))
+		return PTR_ERR(data->regmap);
 
 	i2c_set_clientdata(client, data);
-	data->client = client;
 	mutex_init(&data->lock);
 
 	dev_info(&client->dev, "%s chip found\n", client->name);
 
 	/* Initialize the ADT7470 chip */
-	adt7470_init_client(client);
+	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG,
+				 ADT7470_STRT_MASK | ADT7470_TEST_MASK,
+				 ADT7470_STRT_MASK | ADT7470_TEST_MASK);
+	if (err < 0)
+		return err;
 
 	/* Register sysfs hooks */
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
-- 
2.32.0

[PATCH v2 3/4] hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API

[Chris Packham]

Use the devm_hwmon_device_register_with_info API and remove code that
deals with the standard sensor attributes.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Change in v2:
- split regmap and devm_hwmon_device_register_with_info into separate
  patches to aid review

 drivers/hwmon/adt7470.c | 683 +++++++++++++++++-----------------------
 1 file changed, 286 insertions(+), 397 deletions(-)

diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index ad3e46667be8..db19a52b13de 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -533,87 +533,59 @@ static ssize_t num_temp_sensors_store(struct device *dev,
 	return count;
 }
 
-static ssize_t temp_min_show(struct device *dev,
-			     struct device_attribute *devattr, char *buf)
+static int adt7470_temp_read(struct device *dev, u32 attr, int channel, long *val)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = adt7470_update_device(dev);
 
 	if (IS_ERR(data))
 		return PTR_ERR(data);
 
-	return sprintf(buf, "%d\n", 1000 * data->temp_min[attr->index]);
+	switch (attr) {
+	case hwmon_temp_input:
+		*val = 1000 * data->temp[channel];
+		break;
+	case hwmon_temp_min:
+		*val = 1000 * data->temp_min[channel];
+		break;
+	case hwmon_temp_max:
+		*val = 1000 * data->temp_max[channel];
+		break;
+	case hwmon_temp_alarm:
+		*val = !!(data->alarm & channel);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
 }
 
-static ssize_t temp_min_store(struct device *dev,
-			      struct device_attribute *devattr,
-			      const char *buf, size_t count)
+static int adt7470_temp_write(struct device *dev, u32 attr, int channel, long val)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	long temp;
 	int err;
 
-	if (kstrtol(buf, 10, &temp))
-		return -EINVAL;
+	val = clamp_val(val, -128000, 127000);
+	val = DIV_ROUND_CLOSEST(val, 1000);
 
-	temp = clamp_val(temp, -128000, 127000);
-	temp = DIV_ROUND_CLOSEST(temp, 1000);
+	switch (attr) {
+	case hwmon_temp_min:
+		mutex_lock(&data->lock);
+		data->temp_min[channel] = val;
+		err = regmap_write(data->regmap, ADT7470_TEMP_MIN_REG(channel), val);
+		mutex_unlock(&data->lock);
+		break;
+	case hwmon_temp_max:
+		mutex_lock(&data->lock);
+		data->temp_max[channel] = val;
+		err = regmap_write(data->regmap, ADT7470_TEMP_MAX_REG(channel), val);
+		mutex_unlock(&data->lock);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
 
-	mutex_lock(&data->lock);
-	data->temp_min[attr->index] = temp;
-	err = regmap_write(data->regmap, ADT7470_TEMP_MIN_REG(attr->index),
-				  temp);
-	mutex_unlock(&data->lock);
-
-	return err < 0 ? err : count;
-}
-
-static ssize_t temp_max_show(struct device *dev,
-			     struct device_attribute *devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = adt7470_update_device(dev);
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	return sprintf(buf, "%d\n", 1000 * data->temp_max[attr->index]);
-}
-
-static ssize_t temp_max_store(struct device *dev,
-			      struct device_attribute *devattr,
-			      const char *buf, size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = dev_get_drvdata(dev);
-	long temp;
-	int err;
-
-	if (kstrtol(buf, 10, &temp))
-		return -EINVAL;
-
-	temp = clamp_val(temp, -128000, 127000);
-	temp = DIV_ROUND_CLOSEST(temp, 1000);
-
-	mutex_lock(&data->lock);
-	data->temp_max[attr->index] = temp;
-	err = regmap_write(data->regmap, ADT7470_TEMP_MAX_REG(attr->index), temp);
-	mutex_unlock(&data->lock);
-
-	return err < 0 ? err : count;
-}
-
-static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
-			 char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = adt7470_update_device(dev);
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	return sprintf(buf, "%d\n", 1000 * data->temp[attr->index]);
+	return err;
 }
 
 static ssize_t alarm_mask_show(struct device *dev,
@@ -650,98 +622,68 @@ static ssize_t alarm_mask_store(struct device *dev,
 	return err < 0 ? err : count;
 }
 
-static ssize_t fan_max_show(struct device *dev,
-			    struct device_attribute *devattr, char *buf)
+static int adt7470_fan_read(struct device *dev, u32 attr, int channel, long *val)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = adt7470_update_device(dev);
 
 	if (IS_ERR(data))
 		return PTR_ERR(data);
 
-	if (FAN_DATA_VALID(data->fan_max[attr->index]))
-		return sprintf(buf, "%d\n",
-			       FAN_PERIOD_TO_RPM(data->fan_max[attr->index]));
-	else
-		return sprintf(buf, "0\n");
+	switch (attr) {
+	case hwmon_fan_input:
+		if (FAN_DATA_VALID(data->fan[channel]))
+			*val = FAN_PERIOD_TO_RPM(data->fan[channel]);
+		else
+			*val = 0;
+		break;
+	case hwmon_fan_min:
+		if (FAN_DATA_VALID(data->fan_min[channel]))
+			*val = FAN_PERIOD_TO_RPM(data->fan_min[channel]);
+		else
+			*val = 0;
+		break;
+	case hwmon_fan_max:
+		if (FAN_DATA_VALID(data->fan_max[channel]))
+			*val = FAN_PERIOD_TO_RPM(data->fan_max[channel]);
+		else
+			*val = 0;
+		break;
+	case hwmon_fan_alarm:
+		*val = !!(data->alarm & (1 << (12 + channel)));
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
 }
 
-static ssize_t fan_max_store(struct device *dev,
-			     struct device_attribute *devattr,
-			     const char *buf, size_t count)
+static int adt7470_fan_write(struct device *dev, u32 attr, int channel, long val)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	long temp;
 	int err;
 
-	if (kstrtol(buf, 10, &temp) || !temp)
-		return -EINVAL;
+	val = FAN_RPM_TO_PERIOD(val);
+	val = clamp_val(val, 1, 65534);
 
-	temp = FAN_RPM_TO_PERIOD(temp);
-	temp = clamp_val(temp, 1, 65534);
+	switch (attr) {
+	case hwmon_fan_min:
+		mutex_lock(&data->lock);
+		data->fan_min[channel] = val;
+		err = adt7470_write_word_data(data, ADT7470_REG_FAN_MIN(channel), val);
+		mutex_unlock(&data->lock);
+		break;
+	case hwmon_fan_max:
+		mutex_lock(&data->lock);
+		data->fan_max[channel] = val;
+		err = adt7470_write_word_data(data, ADT7470_REG_FAN_MAX(channel), val);
+		mutex_unlock(&data->lock);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
 
-	mutex_lock(&data->lock);
-	data->fan_max[attr->index] = temp;
-	err = adt7470_write_word_data(data, ADT7470_REG_FAN_MAX(attr->index), temp);
-	mutex_unlock(&data->lock);
-
-	return err < 0 ? err : count;
-}
-
-static ssize_t fan_min_show(struct device *dev,
-			    struct device_attribute *devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = adt7470_update_device(dev);
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	if (FAN_DATA_VALID(data->fan_min[attr->index]))
-		return sprintf(buf, "%d\n",
-			       FAN_PERIOD_TO_RPM(data->fan_min[attr->index]));
-	else
-		return sprintf(buf, "0\n");
-}
-
-static ssize_t fan_min_store(struct device *dev,
-			     struct device_attribute *devattr,
-			     const char *buf, size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = dev_get_drvdata(dev);
-	long temp;
-	int err;
-
-	if (kstrtol(buf, 10, &temp) || !temp)
-		return -EINVAL;
-
-	temp = FAN_RPM_TO_PERIOD(temp);
-	temp = clamp_val(temp, 1, 65534);
-
-	mutex_lock(&data->lock);
-	data->fan_min[attr->index] = temp;
-	err = adt7470_write_word_data(data, ADT7470_REG_FAN_MIN(attr->index), temp);
-	mutex_unlock(&data->lock);
-
-	return err < 0 ? err : count;
-}
-
-static ssize_t fan_show(struct device *dev, struct device_attribute *devattr,
-			char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = adt7470_update_device(dev);
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	if (FAN_DATA_VALID(data->fan[attr->index]))
-		return sprintf(buf, "%d\n",
-			       FAN_PERIOD_TO_RPM(data->fan[attr->index]));
-	else
-		return sprintf(buf, "0\n");
+	return err;
 }
 
 static ssize_t force_pwm_max_show(struct device *dev,
@@ -776,55 +718,18 @@ static ssize_t force_pwm_max_store(struct device *dev,
 	return err < 0 ? err : count;
 }
 
-static ssize_t pwm_show(struct device *dev, struct device_attribute *devattr,
-			char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = adt7470_update_device(dev);
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	return sprintf(buf, "%d\n", data->pwm[attr->index]);
-}
-
-static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr,
-			 const char *buf, size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = dev_get_drvdata(dev);
-	long temp;
-	int err;
-
-	if (kstrtol(buf, 10, &temp))
-		return -EINVAL;
-
-	temp = clamp_val(temp, 0, 255);
-
-	mutex_lock(&data->lock);
-	data->pwm[attr->index] = temp;
-	err = regmap_write(data->regmap, ADT7470_REG_PWM(attr->index), temp);
-	mutex_unlock(&data->lock);
-
-	return err < 0 ? err : count;
-}
-
 /* These are the valid PWM frequencies to the nearest Hz */
 static const int adt7470_freq_map[] = {
 	11, 15, 22, 29, 35, 44, 59, 88, 1400, 22500
 };
 
-static ssize_t pwm1_freq_show(struct device *dev,
-			      struct device_attribute *devattr, char *buf)
+static int pwm1_freq_get(struct device *dev)
 {
-	struct adt7470_data *data = adt7470_update_device(dev);
+	struct adt7470_data *data = dev_get_drvdata(dev);
 	unsigned int cfg_reg_1, cfg_reg_2;
 	int index;
 	int err;
 
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
 	mutex_lock(&data->lock);
 	err = regmap_read(data->regmap, ADT7470_REG_CFG, &cfg_reg_1);
 	if (err < 0)
@@ -840,26 +745,44 @@ static ssize_t pwm1_freq_show(struct device *dev,
 	if (index >= ARRAY_SIZE(adt7470_freq_map))
 		index = ARRAY_SIZE(adt7470_freq_map) - 1;
 
-	return scnprintf(buf, PAGE_SIZE, "%d\n", adt7470_freq_map[index]);
+	return adt7470_freq_map[index];
 
 out:
 	mutex_unlock(&data->lock);
 	return err;
 }
 
-static ssize_t pwm1_freq_store(struct device *dev,
-			       struct device_attribute *devattr,
-			       const char *buf, size_t count)
+static int adt7470_pwm_read(struct device *dev, u32 attr, int channel, long *val)
+{
+	struct adt7470_data *data = adt7470_update_device(dev);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		*val = data->pwm[channel];
+		break;
+	case hwmon_pwm_enable:
+		*val = 1 + data->pwm_automatic[channel];
+		break;
+	case hwmon_pwm_freq:
+		*val = pwm1_freq_get(dev);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int pwm1_freq_set(struct device *dev, long freq)
 {
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	long freq;
+	unsigned int low_freq = ADT7470_CFG_LF;
 	int index;
-	int low_freq = ADT7470_CFG_LF;
 	int err;
 
-	if (kstrtol(buf, 10, &freq))
-		return -EINVAL;
-
 	/* Round the user value given to the closest available frequency */
 	index = find_closest(freq, adt7470_freq_map,
 			     ARRAY_SIZE(adt7470_freq_map));
@@ -883,7 +806,50 @@ static ssize_t pwm1_freq_store(struct device *dev,
 out:
 	mutex_unlock(&data->lock);
 
-	return err < 0 ? err : count;
+	return err;
+}
+
+static int adt7470_pwm_write(struct device *dev, u32 attr, int channel, long val)
+{
+	struct adt7470_data *data = dev_get_drvdata(dev);
+	unsigned int pwm_auto_reg_mask;
+	int err;
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		val = clamp_val(val, 0, 255);
+		mutex_lock(&data->lock);
+		data->pwm[channel] = val;
+		err = regmap_write(data->regmap, ADT7470_REG_PWM(channel),
+				   data->pwm[channel]);
+		mutex_unlock(&data->lock);
+		break;
+	case hwmon_pwm_enable:
+		if (channel % 2)
+			pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK;
+		else
+			pwm_auto_reg_mask = ADT7470_PWM1_AUTO_MASK;
+
+		if (val != 2 && val != 1)
+			return -EINVAL;
+		val--;
+
+		mutex_lock(&data->lock);
+		data->pwm_automatic[channel] = val;
+		err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(channel),
+				pwm_auto_reg_mask,
+				val ? pwm_auto_reg_mask : 0);
+		mutex_unlock(&data->lock);
+		break;
+	case hwmon_pwm_freq:
+		err = pwm1_freq_set(dev, val);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return err;
+
 }
 
 static ssize_t pwm_max_show(struct device *dev,
@@ -1005,50 +971,6 @@ static ssize_t pwm_tmin_store(struct device *dev,
 	return err < 0 ? err : count;
 }
 
-static ssize_t pwm_auto_show(struct device *dev,
-			     struct device_attribute *devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = adt7470_update_device(dev);
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	return sprintf(buf, "%d\n", 1 + data->pwm_automatic[attr->index]);
-}
-
-static ssize_t pwm_auto_store(struct device *dev,
-			      struct device_attribute *devattr,
-			      const char *buf, size_t count)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = dev_get_drvdata(dev);
-	int pwm_auto_reg_mask;
-	long temp;
-	int err;
-
-	if (kstrtol(buf, 10, &temp))
-		return -EINVAL;
-
-	if (attr->index % 2)
-		pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK;
-	else
-		pwm_auto_reg_mask = ADT7470_PWM1_AUTO_MASK;
-
-	if (temp != 2 && temp != 1)
-		return -EINVAL;
-	temp--;
-
-	mutex_lock(&data->lock);
-	data->pwm_automatic[attr->index] = temp;
-	err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(attr->index),
-				 pwm_auto_reg_mask,
-				 temp ? pwm_auto_reg_mask : 0);
-	mutex_unlock(&data->lock);
-
-	return err < 0 ? err : count;
-}
-
 static ssize_t pwm_auto_temp_show(struct device *dev,
 				  struct device_attribute *devattr, char *buf)
 {
@@ -1110,98 +1032,12 @@ static ssize_t pwm_auto_temp_store(struct device *dev,
 	return err < 0 ? err : count;
 }
 
-static ssize_t alarm_show(struct device *dev,
-			  struct device_attribute *devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct adt7470_data *data = adt7470_update_device(dev);
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	if (data->alarm & attr->index)
-		return sprintf(buf, "1\n");
-	else
-		return sprintf(buf, "0\n");
-}
-
 static DEVICE_ATTR_RW(alarm_mask);
 static DEVICE_ATTR_RW(num_temp_sensors);
 static DEVICE_ATTR_RW(auto_update_interval);
 
-static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
-static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
-static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2);
-static SENSOR_DEVICE_ATTR_RW(temp4_max, temp_max, 3);
-static SENSOR_DEVICE_ATTR_RW(temp5_max, temp_max, 4);
-static SENSOR_DEVICE_ATTR_RW(temp6_max, temp_max, 5);
-static SENSOR_DEVICE_ATTR_RW(temp7_max, temp_max, 6);
-static SENSOR_DEVICE_ATTR_RW(temp8_max, temp_max, 7);
-static SENSOR_DEVICE_ATTR_RW(temp9_max, temp_max, 8);
-static SENSOR_DEVICE_ATTR_RW(temp10_max, temp_max, 9);
-
-static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0);
-static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1);
-static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2);
-static SENSOR_DEVICE_ATTR_RW(temp4_min, temp_min, 3);
-static SENSOR_DEVICE_ATTR_RW(temp5_min, temp_min, 4);
-static SENSOR_DEVICE_ATTR_RW(temp6_min, temp_min, 5);
-static SENSOR_DEVICE_ATTR_RW(temp7_min, temp_min, 6);
-static SENSOR_DEVICE_ATTR_RW(temp8_min, temp_min, 7);
-static SENSOR_DEVICE_ATTR_RW(temp9_min, temp_min, 8);
-static SENSOR_DEVICE_ATTR_RW(temp10_min, temp_min, 9);
-
-static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
-static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
-static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
-static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3);
-static SENSOR_DEVICE_ATTR_RO(temp5_input, temp, 4);
-static SENSOR_DEVICE_ATTR_RO(temp6_input, temp, 5);
-static SENSOR_DEVICE_ATTR_RO(temp7_input, temp, 6);
-static SENSOR_DEVICE_ATTR_RO(temp8_input, temp, 7);
-static SENSOR_DEVICE_ATTR_RO(temp9_input, temp, 8);
-static SENSOR_DEVICE_ATTR_RO(temp10_input, temp, 9);
-
-static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, ADT7470_R1T_ALARM);
-static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, ADT7470_R2T_ALARM);
-static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, ADT7470_R3T_ALARM);
-static SENSOR_DEVICE_ATTR_RO(temp4_alarm, alarm, ADT7470_R4T_ALARM);
-static SENSOR_DEVICE_ATTR_RO(temp5_alarm, alarm, ADT7470_R5T_ALARM);
-static SENSOR_DEVICE_ATTR_RO(temp6_alarm, alarm, ADT7470_R6T_ALARM);
-static SENSOR_DEVICE_ATTR_RO(temp7_alarm, alarm, ADT7470_R7T_ALARM);
-static SENSOR_DEVICE_ATTR_RO(temp8_alarm, alarm, ALARM2(ADT7470_R8T_ALARM));
-static SENSOR_DEVICE_ATTR_RO(temp9_alarm, alarm, ALARM2(ADT7470_R9T_ALARM));
-static SENSOR_DEVICE_ATTR_RO(temp10_alarm, alarm, ALARM2(ADT7470_R10T_ALARM));
-
-static SENSOR_DEVICE_ATTR_RW(fan1_max, fan_max, 0);
-static SENSOR_DEVICE_ATTR_RW(fan2_max, fan_max, 1);
-static SENSOR_DEVICE_ATTR_RW(fan3_max, fan_max, 2);
-static SENSOR_DEVICE_ATTR_RW(fan4_max, fan_max, 3);
-
-static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
-static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
-static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2);
-static SENSOR_DEVICE_ATTR_RW(fan4_min, fan_min, 3);
-
-static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
-static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
-static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2);
-static SENSOR_DEVICE_ATTR_RO(fan4_input, fan, 3);
-
-static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, ALARM2(ADT7470_FAN1_ALARM));
-static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, ALARM2(ADT7470_FAN2_ALARM));
-static SENSOR_DEVICE_ATTR_RO(fan3_alarm, alarm, ALARM2(ADT7470_FAN3_ALARM));
-static SENSOR_DEVICE_ATTR_RO(fan4_alarm, alarm, ALARM2(ADT7470_FAN4_ALARM));
-
 static SENSOR_DEVICE_ATTR_RW(force_pwm_max, force_pwm_max, 0);
 
-static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
-static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1);
-static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, 2);
-static SENSOR_DEVICE_ATTR_RW(pwm4, pwm, 3);
-
-static DEVICE_ATTR_RW(pwm1_freq);
-
 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_pwm, pwm_min, 0);
 static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point1_pwm, pwm_min, 1);
 static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point1_pwm, pwm_min, 2);
@@ -1222,11 +1058,6 @@ static SENSOR_DEVICE_ATTR_RO(pwm2_auto_point2_temp, pwm_tmax, 1);
 static SENSOR_DEVICE_ATTR_RO(pwm3_auto_point2_temp, pwm_tmax, 2);
 static SENSOR_DEVICE_ATTR_RO(pwm4_auto_point2_temp, pwm_tmax, 3);
 
-static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_auto, 0);
-static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_auto, 1);
-static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_auto, 2);
-static SENSOR_DEVICE_ATTR_RW(pwm4_enable, pwm_auto, 3);
-
 static SENSOR_DEVICE_ATTR_RW(pwm1_auto_channels_temp, pwm_auto_temp, 0);
 static SENSOR_DEVICE_ATTR_RW(pwm2_auto_channels_temp, pwm_auto_temp, 1);
 static SENSOR_DEVICE_ATTR_RW(pwm3_auto_channels_temp, pwm_auto_temp, 2);
@@ -1236,68 +1067,7 @@ static struct attribute *adt7470_attrs[] = {
 	&dev_attr_alarm_mask.attr,
 	&dev_attr_num_temp_sensors.attr,
 	&dev_attr_auto_update_interval.attr,
-	&sensor_dev_attr_temp1_max.dev_attr.attr,
-	&sensor_dev_attr_temp2_max.dev_attr.attr,
-	&sensor_dev_attr_temp3_max.dev_attr.attr,
-	&sensor_dev_attr_temp4_max.dev_attr.attr,
-	&sensor_dev_attr_temp5_max.dev_attr.attr,
-	&sensor_dev_attr_temp6_max.dev_attr.attr,
-	&sensor_dev_attr_temp7_max.dev_attr.attr,
-	&sensor_dev_attr_temp8_max.dev_attr.attr,
-	&sensor_dev_attr_temp9_max.dev_attr.attr,
-	&sensor_dev_attr_temp10_max.dev_attr.attr,
-	&sensor_dev_attr_temp1_min.dev_attr.attr,
-	&sensor_dev_attr_temp2_min.dev_attr.attr,
-	&sensor_dev_attr_temp3_min.dev_attr.attr,
-	&sensor_dev_attr_temp4_min.dev_attr.attr,
-	&sensor_dev_attr_temp5_min.dev_attr.attr,
-	&sensor_dev_attr_temp6_min.dev_attr.attr,
-	&sensor_dev_attr_temp7_min.dev_attr.attr,
-	&sensor_dev_attr_temp8_min.dev_attr.attr,
-	&sensor_dev_attr_temp9_min.dev_attr.attr,
-	&sensor_dev_attr_temp10_min.dev_attr.attr,
-	&sensor_dev_attr_temp1_input.dev_attr.attr,
-	&sensor_dev_attr_temp2_input.dev_attr.attr,
-	&sensor_dev_attr_temp3_input.dev_attr.attr,
-	&sensor_dev_attr_temp4_input.dev_attr.attr,
-	&sensor_dev_attr_temp5_input.dev_attr.attr,
-	&sensor_dev_attr_temp6_input.dev_attr.attr,
-	&sensor_dev_attr_temp7_input.dev_attr.attr,
-	&sensor_dev_attr_temp8_input.dev_attr.attr,
-	&sensor_dev_attr_temp9_input.dev_attr.attr,
-	&sensor_dev_attr_temp10_input.dev_attr.attr,
-	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp4_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp5_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp6_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp7_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp8_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp9_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp10_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan1_max.dev_attr.attr,
-	&sensor_dev_attr_fan2_max.dev_attr.attr,
-	&sensor_dev_attr_fan3_max.dev_attr.attr,
-	&sensor_dev_attr_fan4_max.dev_attr.attr,
-	&sensor_dev_attr_fan1_min.dev_attr.attr,
-	&sensor_dev_attr_fan2_min.dev_attr.attr,
-	&sensor_dev_attr_fan3_min.dev_attr.attr,
-	&sensor_dev_attr_fan4_min.dev_attr.attr,
-	&sensor_dev_attr_fan1_input.dev_attr.attr,
-	&sensor_dev_attr_fan2_input.dev_attr.attr,
-	&sensor_dev_attr_fan3_input.dev_attr.attr,
-	&sensor_dev_attr_fan4_input.dev_attr.attr,
-	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
 	&sensor_dev_attr_force_pwm_max.dev_attr.attr,
-	&sensor_dev_attr_pwm1.dev_attr.attr,
-	&dev_attr_pwm1_freq.attr,
-	&sensor_dev_attr_pwm2.dev_attr.attr,
-	&sensor_dev_attr_pwm3.dev_attr.attr,
-	&sensor_dev_attr_pwm4.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
@@ -1314,10 +1084,6 @@ static struct attribute *adt7470_attrs[] = {
 	&sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr,
-	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
-	&sensor_dev_attr_pwm4_enable.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
@@ -1327,6 +1093,129 @@ static struct attribute *adt7470_attrs[] = {
 
 ATTRIBUTE_GROUPS(adt7470);
 
+static int adt7470_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+			int channel, long *val)
+{
+	switch (type) {
+	case hwmon_temp:
+		return adt7470_temp_read(dev, attr, channel, val);
+	case hwmon_fan:
+		return adt7470_fan_read(dev, attr, channel, val);
+	case hwmon_pwm:
+		return adt7470_pwm_read(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int adt7470_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+			int channel, long val)
+{
+	switch (type) {
+	case hwmon_temp:
+		return adt7470_temp_write(dev, attr, channel, val);
+	case hwmon_fan:
+		return adt7470_fan_write(dev, attr, channel, val);
+	case hwmon_pwm:
+		return adt7470_pwm_write(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static umode_t adt7470_is_visible(const void *_data, enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	umode_t mode = 0;
+
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp:
+		case hwmon_temp_alarm:
+			mode = 0444;
+			break;
+		case hwmon_temp_min:
+		case hwmon_temp_max:
+			mode = 0644;
+			break;
+		default:
+			break;
+		}
+		break;
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
+		case hwmon_fan_alarm:
+			mode = 0444;
+			break;
+		case hwmon_fan_min:
+		case hwmon_fan_max:
+			mode = 0644;
+			break;
+		default:
+			break;
+		}
+		break;
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+		case hwmon_pwm_enable:
+			mode = 0644;
+			break;
+		case hwmon_pwm_freq:
+			if (channel == 0)
+				mode = 0644;
+			else
+				mode = 0;
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return mode;
+}
+
+static const struct hwmon_ops adt7470_hwmon_ops = {
+	.is_visible = adt7470_is_visible,
+	.read = adt7470_read,
+	.write = adt7470_write,
+};
+
+static const struct hwmon_channel_info *adt7470_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
+			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
+			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
+			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
+			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
+			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
+			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
+			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
+			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
+			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM),
+	HWMON_CHANNEL_INFO(fan,
+			HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM,
+			HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM,
+			HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM,
+			HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM),
+	HWMON_CHANNEL_INFO(pwm,
+			HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_FREQ,
+			HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+			HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+			HWMON_PWM_INPUT | HWMON_PWM_ENABLE),
+	NULL
+};
+
+static const struct hwmon_chip_info adt7470_chip_info = {
+	.ops = &adt7470_hwmon_ops,
+	.info = adt7470_info,
+};
+
 /* Return 0 if detection is successful, -ENODEV otherwise */
 static int adt7470_detect(struct i2c_client *client,
 			  struct i2c_board_info *info)
@@ -1391,9 +1280,9 @@ static int adt7470_probe(struct i2c_client *client)
 		return err;
 
 	/* Register sysfs hooks */
-	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
-							   data,
-							   adt7470_groups);
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data,
+							 &adt7470_chip_info,
+							 adt7470_groups);
 
 	if (IS_ERR(hwmon_dev))
 		return PTR_ERR(hwmon_dev);
-- 
2.32.0

[PATCH v2 4/4] hwmon: (adt7470) Use standard update_interval property

[Chris Packham]

Instead of the non-standard auto_update_interval make use of the
update_interval property that is supported by the hwmon core.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    I kind of anticipate a NAK on this because it affects the ABI. But I figured
    I'd run it past the ML to see if moving towards the hwmon core is worth the hit
    in ABI compatibility.
    
    Changes in v2:
    - none

 drivers/hwmon/adt7470.c | 64 +++++++++++++++++++++++++----------------
 1 file changed, 39 insertions(+), 25 deletions(-)

diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index db19a52b13de..7afbd1e4721e 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -469,35 +469,37 @@ static struct adt7470_data *adt7470_update_device(struct device *dev)
 	return err < 0 ? ERR_PTR(err) : data;
 }
 
-static ssize_t auto_update_interval_show(struct device *dev,
-					 struct device_attribute *devattr,
-					 char *buf)
-{
-	struct adt7470_data *data = adt7470_update_device(dev);
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	return sprintf(buf, "%d\n", data->auto_update_interval);
-}
-
-static ssize_t auto_update_interval_store(struct device *dev,
-					  struct device_attribute *devattr,
-					  const char *buf, size_t count)
+static int adt7470_chip_read(struct device *dev, u32 attr, long *val)
 {
 	struct adt7470_data *data = dev_get_drvdata(dev);
-	long temp;
 
-	if (kstrtol(buf, 10, &temp))
-		return -EINVAL;
+	switch (attr) {
+	case hwmon_chip_update_interval:
+		*val = data->auto_update_interval;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
 
-	temp = clamp_val(temp, 0, 60000);
+	return 0;
+}
 
-	mutex_lock(&data->lock);
-	data->auto_update_interval = temp;
-	mutex_unlock(&data->lock);
+static int adt7470_chip_write(struct device *dev, u32 attr, long val)
+{
+	struct adt7470_data *data = dev_get_drvdata(dev);
 
-	return count;
+	switch (attr) {
+	case hwmon_chip_update_interval:
+		val = clamp_val(val, 0, 60000);
+		mutex_lock(&data->lock);
+		data->auto_update_interval = val;
+		mutex_unlock(&data->lock);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
 }
 
 static ssize_t num_temp_sensors_show(struct device *dev,
@@ -1034,7 +1036,6 @@ static ssize_t pwm_auto_temp_store(struct device *dev,
 
 static DEVICE_ATTR_RW(alarm_mask);
 static DEVICE_ATTR_RW(num_temp_sensors);
-static DEVICE_ATTR_RW(auto_update_interval);
 
 static SENSOR_DEVICE_ATTR_RW(force_pwm_max, force_pwm_max, 0);
 
@@ -1066,7 +1067,6 @@ static SENSOR_DEVICE_ATTR_RW(pwm4_auto_channels_temp, pwm_auto_temp, 3);
 static struct attribute *adt7470_attrs[] = {
 	&dev_attr_alarm_mask.attr,
 	&dev_attr_num_temp_sensors.attr,
-	&dev_attr_auto_update_interval.attr,
 	&sensor_dev_attr_force_pwm_max.dev_attr.attr,
 	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
@@ -1097,6 +1097,8 @@ static int adt7470_read(struct device *dev, enum hwmon_sensor_types type, u32 at
 			int channel, long *val)
 {
 	switch (type) {
+	case hwmon_chip:
+		return adt7470_chip_read(dev, attr, val);
 	case hwmon_temp:
 		return adt7470_temp_read(dev, attr, channel, val);
 	case hwmon_fan:
@@ -1112,6 +1114,8 @@ static int adt7470_write(struct device *dev, enum hwmon_sensor_types type, u32 a
 			int channel, long val)
 {
 	switch (type) {
+	case hwmon_chip:
+		return adt7470_chip_write(dev, attr, val);
 	case hwmon_temp:
 		return adt7470_temp_write(dev, attr, channel, val);
 	case hwmon_fan:
@@ -1129,6 +1133,15 @@ static umode_t adt7470_is_visible(const void *_data, enum hwmon_sensor_types typ
 	umode_t mode = 0;
 
 	switch (type) {
+	case hwmon_chip:
+		switch (attr) {
+		case hwmon_chip_update_interval:
+			mode = 0644;
+			break;
+		default:
+			break;
+		}
+		break;
 	case hwmon_temp:
 		switch (attr) {
 		case hwmon_temp:
@@ -1187,6 +1200,7 @@ static const struct hwmon_ops adt7470_hwmon_ops = {
 };
 
 static const struct hwmon_channel_info *adt7470_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
 	HWMON_CHANNEL_INFO(temp,
 			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
 			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
-- 
2.32.0

Re: [PATCH v2 1/4] hwmon: (adt7470) Fix some style issues

[Guenter Roeck]

On Thu, Aug 26, 2021 at 02:41:18PM +1200, Chris Packham wrote:
> In preparation for the changes that follow fix up some existing style
> issues.
> Specifically:
> - add blank line between variable declaration and code
> - use strscpy instead of strlcpy
> - remove unnecessary braces
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Applied.

Thanks,
Guenter

> ---
> Changes in v2:
> - new
> 
>  drivers/hwmon/adt7470.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
> index 2e8feacccf84..3358ec58b977 100644
> --- a/drivers/hwmon/adt7470.c
> +++ b/drivers/hwmon/adt7470.c
> @@ -174,6 +174,7 @@ struct adt7470_data {
>  static inline int adt7470_read_word_data(struct i2c_client *client, u8 reg)
>  {
>  	u16 foo;
> +
>  	foo = i2c_smbus_read_byte_data(client, reg);
>  	foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
>  	return foo;
> @@ -1282,7 +1283,7 @@ static int adt7470_detect(struct i2c_client *client,
>  	if (revision != ADT7470_REVISION)
>  		return -ENODEV;
>  
> -	strlcpy(info->type, "adt7470", I2C_NAME_SIZE);
> +	strscpy(info->type, "adt7470", I2C_NAME_SIZE);
>  
>  	return 0;
>  }
> @@ -1331,9 +1332,8 @@ static int adt7470_probe(struct i2c_client *client)
>  
>  	data->auto_update = kthread_run(adt7470_update_thread, client, "%s",
>  					dev_name(hwmon_dev));
> -	if (IS_ERR(data->auto_update)) {
> +	if (IS_ERR(data->auto_update))
>  		return PTR_ERR(data->auto_update);
> -	}
>  
>  	return 0;
>  }

Re: [PATCH v2 2/4] hwmon: (adt7470) Convert to use regmap

[Guenter Roeck]

On Thu, Aug 26, 2021 at 02:41:19PM +1200, Chris Packham wrote:
> Convert the adt7470 to using regmap which allows better error handling.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Applied.

Thanks,
Guenter

> ---
> Change in v2:
> - split regmap and devm_hwmon_device_register_with_info into separate
>   patches to aid review
> 
>  drivers/hwmon/adt7470.c | 430 +++++++++++++++++++++++-----------------
>  1 file changed, 249 insertions(+), 181 deletions(-)
> 
> diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
> index 3358ec58b977..ad3e46667be8 100644
> --- a/drivers/hwmon/adt7470.c
> +++ b/drivers/hwmon/adt7470.c
> @@ -18,6 +18,7 @@
>  #include <linux/delay.h>
>  #include <linux/log2.h>
>  #include <linux/kthread.h>
> +#include <linux/regmap.h>
>  #include <linux/slab.h>
>  #include <linux/util_macros.h>
>  
> @@ -35,7 +36,10 @@ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END };
>  #define ADT7470_REG_PWM_MAX_BASE_ADDR		0x38
>  #define ADT7470_REG_PWM_MAX_MAX_ADDR		0x3B
>  #define ADT7470_REG_CFG				0x40
> +#define		ADT7470_STRT_MASK		0x01
> +#define		ADT7470_TEST_MASK		0x02
>  #define		ADT7470_FSPD_MASK		0x04
> +#define		ADT7470_T05_STB_MASK		0x80
>  #define ADT7470_REG_ALARM1			0x41
>  #define		ADT7470_R1T_ALARM		0x01
>  #define		ADT7470_R2T_ALARM		0x02
> @@ -137,7 +141,7 @@ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END };
>  #define ADT7470_FREQ_SHIFT	4
>  
>  struct adt7470_data {
> -	struct i2c_client	*client;
> +	struct regmap		*regmap;
>  	struct mutex		lock;
>  	char			sensors_valid;
>  	char			limits_valid;
> @@ -171,52 +175,76 @@ struct adt7470_data {
>   * 16-bit registers on the ADT7470 are low-byte first.  The data sheet says
>   * that the low byte must be read before the high byte.
>   */
> -static inline int adt7470_read_word_data(struct i2c_client *client, u8 reg)
> +static inline int adt7470_read_word_data(struct adt7470_data *data, unsigned int reg,
> +					 unsigned int *val)
>  {
> -	u16 foo;
> +	u8 regval[2];
> +	int err;
>  
> -	foo = i2c_smbus_read_byte_data(client, reg);
> -	foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
> -	return foo;
> +	err = regmap_bulk_read(data->regmap, reg, &regval, 2);
> +	if (err < 0)
> +		return err;
> +
> +	*val = regval[0] | (regval[1] << 8);
> +
> +	return 0;
>  }
>  
> -static inline int adt7470_write_word_data(struct i2c_client *client, u8 reg,
> -					  u16 value)
> +static inline int adt7470_write_word_data(struct adt7470_data *data, unsigned int reg,
> +					  unsigned int val)
>  {
> -	return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
> -	       || i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
> +	u8 regval[2];
> +
> +	regval[0] = val & 0xFF;
> +	regval[1] = val >> 8;
> +
> +	return regmap_bulk_write(data->regmap, reg, &regval, 2);
>  }
>  
>  /* Probe for temperature sensors.  Assumes lock is held */
> -static int adt7470_read_temperatures(struct i2c_client *client,
> -				     struct adt7470_data *data)
> +static int adt7470_read_temperatures(struct adt7470_data *data)
>  {
>  	unsigned long res;
> +	unsigned int pwm_cfg[2];
> +	int err;
>  	int i;
> -	u8 cfg, pwm[4], pwm_cfg[2];
> +	u8 pwm[ADT7470_FAN_COUNT];
>  
>  	/* save pwm[1-4] config register */
> -	pwm_cfg[0] = i2c_smbus_read_byte_data(client, ADT7470_REG_PWM_CFG(0));
> -	pwm_cfg[1] = i2c_smbus_read_byte_data(client, ADT7470_REG_PWM_CFG(2));
> +	err = regmap_read(data->regmap, ADT7470_REG_PWM_CFG(0), &pwm_cfg[0]);
> +	if (err < 0)
> +		return err;
> +	err = regmap_read(data->regmap, ADT7470_REG_PWM_CFG(2), &pwm_cfg[1]);
> +	if (err < 0)
> +		return err;
>  
>  	/* set manual pwm to whatever it is set to now */
> -	for (i = 0; i < ADT7470_FAN_COUNT; i++)
> -		pwm[i] = i2c_smbus_read_byte_data(client, ADT7470_REG_PWM(i));
> +	err = regmap_bulk_read(data->regmap, ADT7470_REG_PWM(0), &pwm[0],
> +			       ADT7470_PWM_COUNT);
> +	if (err < 0)
> +		return err;
>  
>  	/* put pwm in manual mode */
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(0),
> -		pwm_cfg[0] & ~(ADT7470_PWM_AUTO_MASK));
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(2),
> -		pwm_cfg[1] & ~(ADT7470_PWM_AUTO_MASK));
> +	err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(0),
> +				 ADT7470_PWM_AUTO_MASK, 0);
> +	if (err < 0)
> +		return err;
> +	err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(2),
> +				 ADT7470_PWM_AUTO_MASK, 0);
> +	if (err < 0)
> +		return err;
>  
>  	/* write pwm control to whatever it was */
> -	for (i = 0; i < ADT7470_FAN_COUNT; i++)
> -		i2c_smbus_write_byte_data(client, ADT7470_REG_PWM(i), pwm[i]);
> +	err = regmap_bulk_write(data->regmap, ADT7470_REG_PWM(0), &pwm[0],
> +				ADT7470_PWM_COUNT);
> +	if (err < 0)
> +		return err;
>  
>  	/* start reading temperature sensors */
> -	cfg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
> -	cfg |= 0x80;
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, cfg);
> +	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG,
> +				 ADT7470_T05_STB_MASK, ADT7470_T05_STB_MASK);
> +	if (err < 0)
> +		return err;
>  
>  	/* Delay is 200ms * number of temp sensors. */
>  	res = msleep_interruptible((data->num_temp_sensors >= 0 ?
> @@ -224,26 +252,31 @@ static int adt7470_read_temperatures(struct i2c_client *client,
>  				    TEMP_COLLECTION_TIME));
>  
>  	/* done reading temperature sensors */
> -	cfg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
> -	cfg &= ~0x80;
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, cfg);
> +	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG,
> +				 ADT7470_T05_STB_MASK, 0);
> +	if (err < 0)
> +		return err;
>  
>  	/* restore pwm[1-4] config registers */
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(0), pwm_cfg[0]);
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(2), pwm_cfg[1]);
> +	err = regmap_write(data->regmap, ADT7470_REG_PWM_CFG(0), pwm_cfg[0]);
> +	if (err < 0)
> +		return err;
> +	err = regmap_write(data->regmap, ADT7470_REG_PWM_CFG(2), pwm_cfg[1]);
> +	if (err < 0)
> +		return err;
>  
> -	if (res) {
> -		pr_err("ha ha, interrupted\n");
> +	if (res)
>  		return -EAGAIN;
> -	}
>  
>  	/* Only count fans if we have to */
>  	if (data->num_temp_sensors >= 0)
>  		return 0;
>  
> +	err = regmap_bulk_read(data->regmap, ADT7470_TEMP_REG(0), &data->temp[0],
> +			       ADT7470_TEMP_COUNT);
> +	if (err < 0)
> +		return err;
>  	for (i = 0; i < ADT7470_TEMP_COUNT; i++) {
> -		data->temp[i] = i2c_smbus_read_byte_data(client,
> -						ADT7470_TEMP_REG(i));
>  		if (data->temp[i])
>  			data->num_temp_sensors = i + 1;
>  	}
> @@ -258,7 +291,7 @@ static int adt7470_update_thread(void *p)
>  
>  	while (!kthread_should_stop()) {
>  		mutex_lock(&data->lock);
> -		adt7470_read_temperatures(client, data);
> +		adt7470_read_temperatures(data);
>  		mutex_unlock(&data->lock);
>  
>  		set_current_state(TASK_INTERRUPTIBLE);
> @@ -273,89 +306,116 @@ static int adt7470_update_thread(void *p)
>  
>  static int adt7470_update_sensors(struct adt7470_data *data)
>  {
> -	struct i2c_client *client = data->client;
> -	u8 cfg;
> +	unsigned int val;
> +	int err;
>  	int i;
>  
>  	if (!data->temperatures_probed)
> -		adt7470_read_temperatures(client, data);
> +		err = adt7470_read_temperatures(data);
>  	else
> -		for (i = 0; i < ADT7470_TEMP_COUNT; i++)
> -			data->temp[i] = i2c_smbus_read_byte_data(client,
> -						ADT7470_TEMP_REG(i));
> +		err = regmap_bulk_read(data->regmap, ADT7470_TEMP_REG(0), &data->temp[0],
> +				       ADT7470_TEMP_COUNT);
> +	if (err < 0)
> +		return err;
>  
> -	for (i = 0; i < ADT7470_FAN_COUNT; i++)
> -		data->fan[i] = adt7470_read_word_data(client,
> -						ADT7470_REG_FAN(i));
> -
> -	for (i = 0; i < ADT7470_PWM_COUNT; i++) {
> -		int reg;
> -		int reg_mask;
> -
> -		data->pwm[i] = i2c_smbus_read_byte_data(client,
> -						ADT7470_REG_PWM(i));
> -
> -		if (i % 2)
> -			reg_mask = ADT7470_PWM2_AUTO_MASK;
> -		else
> -			reg_mask = ADT7470_PWM1_AUTO_MASK;
> -
> -		reg = ADT7470_REG_PWM_CFG(i);
> -		if (i2c_smbus_read_byte_data(client, reg) & reg_mask)
> -			data->pwm_automatic[i] = 1;
> -		else
> -			data->pwm_automatic[i] = 0;
> -
> -		reg = ADT7470_REG_PWM_AUTO_TEMP(i);
> -		cfg = i2c_smbus_read_byte_data(client, reg);
> -		if (!(i % 2))
> -			data->pwm_auto_temp[i] = cfg >> 4;
> -		else
> -			data->pwm_auto_temp[i] = cfg & 0xF;
> +	for (i = 0; i < ADT7470_FAN_COUNT; i++) {
> +		err = adt7470_read_word_data(data, ADT7470_REG_FAN(i), &val);
> +		if (err < 0)
> +			return err;
> +		data->fan[i] =	val;
>  	}
>  
> -	if (i2c_smbus_read_byte_data(client, ADT7470_REG_CFG) &
> -	    ADT7470_FSPD_MASK)
> -		data->force_pwm_max = 1;
> -	else
> -		data->force_pwm_max = 0;
> +	err = regmap_bulk_read(data->regmap, ADT7470_REG_PWM(0), &data->pwm[0], ADT7470_PWM_COUNT);
> +	if (err < 0)
> +		return err;
>  
> -	data->alarm = i2c_smbus_read_byte_data(client, ADT7470_REG_ALARM1);
> -	if (data->alarm & ADT7470_OOL_ALARM)
> -		data->alarm |= ALARM2(i2c_smbus_read_byte_data(client,
> -							ADT7470_REG_ALARM2));
> -	data->alarms_mask = adt7470_read_word_data(client,
> -						   ADT7470_REG_ALARM1_MASK);
> +	for (i = 0; i < ADT7470_PWM_COUNT; i++) {
> +		unsigned int mask;
> +
> +		if (i % 2)
> +			mask = ADT7470_PWM2_AUTO_MASK;
> +		else
> +			mask = ADT7470_PWM1_AUTO_MASK;
> +
> +		err = regmap_read(data->regmap, ADT7470_REG_PWM_CFG(i), &val);
> +		if (err < 0)
> +			return err;
> +		data->pwm_automatic[i] = !!(val & mask);
> +
> +		err = regmap_read(data->regmap, ADT7470_REG_PWM_AUTO_TEMP(i), &val);
> +		if (err < 0)
> +			return err;
> +		if (!(i % 2))
> +			data->pwm_auto_temp[i] = val >> 4;
> +		else
> +			data->pwm_auto_temp[i] = val & 0xF;
> +	}
> +
> +	err = regmap_read(data->regmap, ADT7470_REG_CFG, &val);
> +	if (err < 0)
> +		return err;
> +	data->force_pwm_max = !!(val & ADT7470_FSPD_MASK);
> +
> +	err = regmap_read(data->regmap, ADT7470_REG_ALARM1, &val);
> +	if (err < 0)
> +		return err;
> +	data->alarm = val;
> +	if (data->alarm & ADT7470_OOL_ALARM) {
> +		err = regmap_read(data->regmap, ADT7470_REG_ALARM2, &val);
> +		if (err < 0)
> +			return err;
> +		data->alarm |= ALARM2(val);
> +	}
> +
> +	err = adt7470_read_word_data(data, ADT7470_REG_ALARM1_MASK, &val);
> +	if (err < 0)
> +		return err;
> +	data->alarms_mask = val;
>  
>  	return 0;
>  }
>  
>  static int adt7470_update_limits(struct adt7470_data *data)
>  {
> -	struct i2c_client *client = data->client;
> +	unsigned int val;
> +	int err;
>  	int i;
>  
>  	for (i = 0; i < ADT7470_TEMP_COUNT; i++) {
> -		data->temp_min[i] = i2c_smbus_read_byte_data(client,
> -						ADT7470_TEMP_MIN_REG(i));
> -		data->temp_max[i] = i2c_smbus_read_byte_data(client,
> -						ADT7470_TEMP_MAX_REG(i));
> +		err = regmap_read(data->regmap, ADT7470_TEMP_MIN_REG(i), &val);
> +		if (err < 0)
> +			return err;
> +		data->temp_min[i] = (s8)val;
> +		err = regmap_read(data->regmap, ADT7470_TEMP_MAX_REG(i), &val);
> +		if (err < 0)
> +			return err;
> +		data->temp_max[i] = (s8)val;
>  	}
>  
>  	for (i = 0; i < ADT7470_FAN_COUNT; i++) {
> -		data->fan_min[i] = adt7470_read_word_data(client,
> -						ADT7470_REG_FAN_MIN(i));
> -		data->fan_max[i] = adt7470_read_word_data(client,
> -						ADT7470_REG_FAN_MAX(i));
> +		err = adt7470_read_word_data(data, ADT7470_REG_FAN_MIN(i), &val);
> +		if (err < 0)
> +			return err;
> +		data->fan_min[i] = val;
> +		err = adt7470_read_word_data(data, ADT7470_REG_FAN_MAX(i), &val);
> +		if (err < 0)
> +			return err;
> +		data->fan_max[i] = val;
>  	}
>  
>  	for (i = 0; i < ADT7470_PWM_COUNT; i++) {
> -		data->pwm_max[i] = i2c_smbus_read_byte_data(client,
> -						ADT7470_REG_PWM_MAX(i));
> -		data->pwm_min[i] = i2c_smbus_read_byte_data(client,
> -						ADT7470_REG_PWM_MIN(i));
> -		data->pwm_tmin[i] = i2c_smbus_read_byte_data(client,
> -						ADT7470_REG_PWM_TMIN(i));
> +		err = regmap_read(data->regmap, ADT7470_REG_PWM_MAX(i), &val);
> +		if (err < 0)
> +			return err;
> +		data->pwm_max[i] = val;
> +		err = regmap_read(data->regmap, ADT7470_REG_PWM_MIN(i), &val);
> +		if (err < 0)
> +			return err;
> +		data->pwm_min[i] = val;
> +		err = regmap_read(data->regmap, ADT7470_REG_PWM_TMIN(i), &val);
> +		if (err < 0)
> +			return err;
> +		data->pwm_tmin[i] = (s8)val;
>  	}
>  
>  	return 0;
> @@ -491,8 +551,8 @@ static ssize_t temp_min_store(struct device *dev,
>  {
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	long temp;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp))
>  		return -EINVAL;
> @@ -502,11 +562,11 @@ static ssize_t temp_min_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	data->temp_min[attr->index] = temp;
> -	i2c_smbus_write_byte_data(client, ADT7470_TEMP_MIN_REG(attr->index),
> +	err = regmap_write(data->regmap, ADT7470_TEMP_MIN_REG(attr->index),
>  				  temp);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t temp_max_show(struct device *dev,
> @@ -527,8 +587,8 @@ static ssize_t temp_max_store(struct device *dev,
>  {
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	long temp;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp))
>  		return -EINVAL;
> @@ -538,11 +598,10 @@ static ssize_t temp_max_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	data->temp_max[attr->index] = temp;
> -	i2c_smbus_write_byte_data(client, ADT7470_TEMP_MAX_REG(attr->index),
> -				  temp);
> +	err = regmap_write(data->regmap, ADT7470_TEMP_MAX_REG(attr->index), temp);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
> @@ -575,6 +634,7 @@ static ssize_t alarm_mask_store(struct device *dev,
>  {
>  	struct adt7470_data *data = dev_get_drvdata(dev);
>  	long mask;
> +	int err;
>  
>  	if (kstrtoul(buf, 0, &mask))
>  		return -EINVAL;
> @@ -584,10 +644,10 @@ static ssize_t alarm_mask_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	data->alarms_mask = mask;
> -	adt7470_write_word_data(data->client, ADT7470_REG_ALARM1_MASK, mask);
> +	err = adt7470_write_word_data(data, ADT7470_REG_ALARM1_MASK, mask);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t fan_max_show(struct device *dev,
> @@ -612,8 +672,8 @@ static ssize_t fan_max_store(struct device *dev,
>  {
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	long temp;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp) || !temp)
>  		return -EINVAL;
> @@ -623,10 +683,10 @@ static ssize_t fan_max_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	data->fan_max[attr->index] = temp;
> -	adt7470_write_word_data(client, ADT7470_REG_FAN_MAX(attr->index), temp);
> +	err = adt7470_write_word_data(data, ADT7470_REG_FAN_MAX(attr->index), temp);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t fan_min_show(struct device *dev,
> @@ -651,8 +711,8 @@ static ssize_t fan_min_store(struct device *dev,
>  {
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	long temp;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp) || !temp)
>  		return -EINVAL;
> @@ -662,10 +722,10 @@ static ssize_t fan_min_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	data->fan_min[attr->index] = temp;
> -	adt7470_write_word_data(client, ADT7470_REG_FAN_MIN(attr->index), temp);
> +	err = adt7470_write_word_data(data, ADT7470_REG_FAN_MIN(attr->index), temp);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t fan_show(struct device *dev, struct device_attribute *devattr,
> @@ -700,24 +760,20 @@ static ssize_t force_pwm_max_store(struct device *dev,
>  				   const char *buf, size_t count)
>  {
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	long temp;
> -	u8 reg;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp))
>  		return -EINVAL;
>  
>  	mutex_lock(&data->lock);
>  	data->force_pwm_max = temp;
> -	reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
> -	if (temp)
> -		reg |= ADT7470_FSPD_MASK;
> -	else
> -		reg &= ~ADT7470_FSPD_MASK;
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, reg);
> +	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG,
> +				 ADT7470_FSPD_MASK,
> +				 temp ? ADT7470_FSPD_MASK : 0);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t pwm_show(struct device *dev, struct device_attribute *devattr,
> @@ -737,8 +793,8 @@ static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr,
>  {
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	long temp;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp))
>  		return -EINVAL;
> @@ -747,10 +803,10 @@ static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr,
>  
>  	mutex_lock(&data->lock);
>  	data->pwm[attr->index] = temp;
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM(attr->index), temp);
> +	err = regmap_write(data->regmap, ADT7470_REG_PWM(attr->index), temp);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  /* These are the valid PWM frequencies to the nearest Hz */
> @@ -762,13 +818,20 @@ static ssize_t pwm1_freq_show(struct device *dev,
>  			      struct device_attribute *devattr, char *buf)
>  {
>  	struct adt7470_data *data = adt7470_update_device(dev);
> -	unsigned char cfg_reg_1;
> -	unsigned char cfg_reg_2;
> +	unsigned int cfg_reg_1, cfg_reg_2;
>  	int index;
> +	int err;
> +
> +	if (IS_ERR(data))
> +		return PTR_ERR(data);
>  
>  	mutex_lock(&data->lock);
> -	cfg_reg_1 = i2c_smbus_read_byte_data(data->client, ADT7470_REG_CFG);
> -	cfg_reg_2 = i2c_smbus_read_byte_data(data->client, ADT7470_REG_CFG_2);
> +	err = regmap_read(data->regmap, ADT7470_REG_CFG, &cfg_reg_1);
> +	if (err < 0)
> +		goto out;
> +	err = regmap_read(data->regmap, ADT7470_REG_CFG_2, &cfg_reg_2);
> +	if (err < 0)
> +		goto out;
>  	mutex_unlock(&data->lock);
>  
>  	index = (cfg_reg_2 & ADT7470_FREQ_MASK) >> ADT7470_FREQ_SHIFT;
> @@ -778,6 +841,10 @@ static ssize_t pwm1_freq_show(struct device *dev,
>  		index = ARRAY_SIZE(adt7470_freq_map) - 1;
>  
>  	return scnprintf(buf, PAGE_SIZE, "%d\n", adt7470_freq_map[index]);
> +
> +out:
> +	mutex_unlock(&data->lock);
> +	return err;
>  }
>  
>  static ssize_t pwm1_freq_store(struct device *dev,
> @@ -785,11 +852,10 @@ static ssize_t pwm1_freq_store(struct device *dev,
>  			       const char *buf, size_t count)
>  {
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	long freq;
>  	int index;
>  	int low_freq = ADT7470_CFG_LF;
> -	unsigned char val;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &freq))
>  		return -EINVAL;
> @@ -805,16 +871,19 @@ static ssize_t pwm1_freq_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	/* Configuration Register 1 */
> -	val = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_CFG,
> -				  (val & ~ADT7470_CFG_LF) | low_freq);
> +	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG,
> +				 ADT7470_CFG_LF, low_freq);
> +	if (err < 0)
> +		goto out;
> +
>  	/* Configuration Register 2 */
> -	val = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG_2);
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_CFG_2,
> -		(val & ~ADT7470_FREQ_MASK) | (index << ADT7470_FREQ_SHIFT));
> +	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG_2,
> +				 ADT7470_FREQ_MASK,
> +				 index << ADT7470_FREQ_SHIFT);
> +out:
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t pwm_max_show(struct device *dev,
> @@ -835,8 +904,8 @@ static ssize_t pwm_max_store(struct device *dev,
>  {
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	long temp;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp))
>  		return -EINVAL;
> @@ -845,11 +914,11 @@ static ssize_t pwm_max_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	data->pwm_max[attr->index] = temp;
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_MAX(attr->index),
> -				  temp);
> +	err = regmap_write(data->regmap, ADT7470_REG_PWM_MAX(attr->index),
> +			   temp);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t pwm_min_show(struct device *dev,
> @@ -870,8 +939,8 @@ static ssize_t pwm_min_store(struct device *dev,
>  {
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	long temp;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp))
>  		return -EINVAL;
> @@ -880,11 +949,11 @@ static ssize_t pwm_min_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	data->pwm_min[attr->index] = temp;
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_MIN(attr->index),
> -				  temp);
> +	err = regmap_write(data->regmap, ADT7470_REG_PWM_MIN(attr->index),
> +			   temp);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t pwm_tmax_show(struct device *dev,
> @@ -918,8 +987,8 @@ static ssize_t pwm_tmin_store(struct device *dev,
>  {
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	long temp;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp))
>  		return -EINVAL;
> @@ -929,11 +998,11 @@ static ssize_t pwm_tmin_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	data->pwm_tmin[attr->index] = temp;
> -	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_TMIN(attr->index),
> -				  temp);
> +	err = regmap_write(data->regmap, ADT7470_REG_PWM_TMIN(attr->index),
> +			   temp);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t pwm_auto_show(struct device *dev,
> @@ -954,11 +1023,9 @@ static ssize_t pwm_auto_store(struct device *dev,
>  {
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
> -	int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index);
>  	int pwm_auto_reg_mask;
>  	long temp;
> -	u8 reg;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp))
>  		return -EINVAL;
> @@ -974,15 +1041,12 @@ static ssize_t pwm_auto_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	data->pwm_automatic[attr->index] = temp;
> -	reg = i2c_smbus_read_byte_data(client, pwm_auto_reg);
> -	if (temp)
> -		reg |= pwm_auto_reg_mask;
> -	else
> -		reg &= ~pwm_auto_reg_mask;
> -	i2c_smbus_write_byte_data(client, pwm_auto_reg, reg);
> +	err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(attr->index),
> +				 pwm_auto_reg_mask,
> +				 temp ? pwm_auto_reg_mask : 0);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t pwm_auto_temp_show(struct device *dev,
> @@ -1017,10 +1081,10 @@ static ssize_t pwm_auto_temp_store(struct device *dev,
>  {
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	struct i2c_client *client = data->client;
>  	int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index);
> +	unsigned int mask, val;
>  	long temp;
> -	u8 reg;
> +	int err;
>  
>  	if (kstrtol(buf, 10, &temp))
>  		return -EINVAL;
> @@ -1031,20 +1095,19 @@ static ssize_t pwm_auto_temp_store(struct device *dev,
>  
>  	mutex_lock(&data->lock);
>  	data->pwm_automatic[attr->index] = temp;
> -	reg = i2c_smbus_read_byte_data(client, pwm_auto_reg);
>  
>  	if (!(attr->index % 2)) {
> -		reg &= 0xF;
> -		reg |= (temp << 4) & 0xF0;
> +		mask = 0xF0;
> +		val = (temp << 4) & 0xF0;
>  	} else {
> -		reg &= 0xF0;
> -		reg |= temp & 0xF;
> +		mask = 0x0F;
> +		val = temp & 0x0F;
>  	}
>  
> -	i2c_smbus_write_byte_data(client, pwm_auto_reg, reg);
> +	err = regmap_update_bits(data->regmap, pwm_auto_reg, mask, val);
>  	mutex_unlock(&data->lock);
>  
> -	return count;
> +	return err < 0 ? err : count;
>  }
>  
>  static ssize_t alarm_show(struct device *dev,
> @@ -1053,6 +1116,9 @@ static ssize_t alarm_show(struct device *dev,
>  	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = adt7470_update_device(dev);
>  
> +	if (IS_ERR(data))
> +		return PTR_ERR(data);
> +
>  	if (data->alarm & attr->index)
>  		return sprintf(buf, "1\n");
>  	else
> @@ -1288,23 +1354,19 @@ static int adt7470_detect(struct i2c_client *client,
>  	return 0;
>  }
>  
> -static void adt7470_init_client(struct i2c_client *client)
> -{
> -	int reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG);
> -
> -	if (reg < 0) {
> -		dev_err(&client->dev, "cannot read configuration register\n");
> -	} else {
> -		/* start monitoring (and do a self-test) */
> -		i2c_smbus_write_byte_data(client, ADT7470_REG_CFG, reg | 3);
> -	}
> -}
> +static const struct regmap_config adt7470_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.use_single_read = true,
> +	.use_single_write = true,
> +};
>  
>  static int adt7470_probe(struct i2c_client *client)
>  {
>  	struct device *dev = &client->dev;
>  	struct adt7470_data *data;
>  	struct device *hwmon_dev;
> +	int err;
>  
>  	data = devm_kzalloc(dev, sizeof(struct adt7470_data), GFP_KERNEL);
>  	if (!data)
> @@ -1312,15 +1374,21 @@ static int adt7470_probe(struct i2c_client *client)
>  
>  	data->num_temp_sensors = -1;
>  	data->auto_update_interval = AUTO_UPDATE_INTERVAL;
> +	data->regmap = devm_regmap_init_i2c(client, &adt7470_regmap_config);
> +	if (IS_ERR(data->regmap))
> +		return PTR_ERR(data->regmap);
>  
>  	i2c_set_clientdata(client, data);
> -	data->client = client;
>  	mutex_init(&data->lock);
>  
>  	dev_info(&client->dev, "%s chip found\n", client->name);
>  
>  	/* Initialize the ADT7470 chip */
> -	adt7470_init_client(client);
> +	err = regmap_update_bits(data->regmap, ADT7470_REG_CFG,
> +				 ADT7470_STRT_MASK | ADT7470_TEST_MASK,
> +				 ADT7470_STRT_MASK | ADT7470_TEST_MASK);
> +	if (err < 0)
> +		return err;
>  
>  	/* Register sysfs hooks */
>  	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,

Re: [PATCH v2 3/4] hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API

[Guenter Roeck]

On Thu, Aug 26, 2021 at 02:41:20PM +1200, Chris Packham wrote:
> Use the devm_hwmon_device_register_with_info API and remove code that
> deals with the standard sensor attributes.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Applied, after fixing up a couple of formattin issues reported by
checkpatch --strict.

> ---
> Change in v2:
> - split regmap and devm_hwmon_device_register_with_info into separate
>   patches to aid review

... and thanks a lot for that!

Guenter

> 
>  drivers/hwmon/adt7470.c | 683 +++++++++++++++++-----------------------
>  1 file changed, 286 insertions(+), 397 deletions(-)
> 
> diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
> index ad3e46667be8..db19a52b13de 100644
> --- a/drivers/hwmon/adt7470.c
> +++ b/drivers/hwmon/adt7470.c
> @@ -533,87 +533,59 @@ static ssize_t num_temp_sensors_store(struct device *dev,
>  	return count;
>  }
>  
> -static ssize_t temp_min_show(struct device *dev,
> -			     struct device_attribute *devattr, char *buf)
> +static int adt7470_temp_read(struct device *dev, u32 attr, int channel, long *val)
>  {
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = adt7470_update_device(dev);
>  
>  	if (IS_ERR(data))
>  		return PTR_ERR(data);
>  
> -	return sprintf(buf, "%d\n", 1000 * data->temp_min[attr->index]);
> +	switch (attr) {
> +	case hwmon_temp_input:
> +		*val = 1000 * data->temp[channel];
> +		break;
> +	case hwmon_temp_min:
> +		*val = 1000 * data->temp_min[channel];
> +		break;
> +	case hwmon_temp_max:
> +		*val = 1000 * data->temp_max[channel];
> +		break;
> +	case hwmon_temp_alarm:
> +		*val = !!(data->alarm & channel);
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	return 0;
>  }
>  
> -static ssize_t temp_min_store(struct device *dev,
> -			      struct device_attribute *devattr,
> -			      const char *buf, size_t count)
> +static int adt7470_temp_write(struct device *dev, u32 attr, int channel, long val)
>  {
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	long temp;
>  	int err;
>  
> -	if (kstrtol(buf, 10, &temp))
> -		return -EINVAL;
> +	val = clamp_val(val, -128000, 127000);
> +	val = DIV_ROUND_CLOSEST(val, 1000);
>  
> -	temp = clamp_val(temp, -128000, 127000);
> -	temp = DIV_ROUND_CLOSEST(temp, 1000);
> +	switch (attr) {
> +	case hwmon_temp_min:
> +		mutex_lock(&data->lock);
> +		data->temp_min[channel] = val;
> +		err = regmap_write(data->regmap, ADT7470_TEMP_MIN_REG(channel), val);
> +		mutex_unlock(&data->lock);
> +		break;
> +	case hwmon_temp_max:
> +		mutex_lock(&data->lock);
> +		data->temp_max[channel] = val;
> +		err = regmap_write(data->regmap, ADT7470_TEMP_MAX_REG(channel), val);
> +		mutex_unlock(&data->lock);
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
>  
> -	mutex_lock(&data->lock);
> -	data->temp_min[attr->index] = temp;
> -	err = regmap_write(data->regmap, ADT7470_TEMP_MIN_REG(attr->index),
> -				  temp);
> -	mutex_unlock(&data->lock);
> -
> -	return err < 0 ? err : count;
> -}
> -
> -static ssize_t temp_max_show(struct device *dev,
> -			     struct device_attribute *devattr, char *buf)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = adt7470_update_device(dev);
> -
> -	if (IS_ERR(data))
> -		return PTR_ERR(data);
> -
> -	return sprintf(buf, "%d\n", 1000 * data->temp_max[attr->index]);
> -}
> -
> -static ssize_t temp_max_store(struct device *dev,
> -			      struct device_attribute *devattr,
> -			      const char *buf, size_t count)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = dev_get_drvdata(dev);
> -	long temp;
> -	int err;
> -
> -	if (kstrtol(buf, 10, &temp))
> -		return -EINVAL;
> -
> -	temp = clamp_val(temp, -128000, 127000);
> -	temp = DIV_ROUND_CLOSEST(temp, 1000);
> -
> -	mutex_lock(&data->lock);
> -	data->temp_max[attr->index] = temp;
> -	err = regmap_write(data->regmap, ADT7470_TEMP_MAX_REG(attr->index), temp);
> -	mutex_unlock(&data->lock);
> -
> -	return err < 0 ? err : count;
> -}
> -
> -static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
> -			 char *buf)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = adt7470_update_device(dev);
> -
> -	if (IS_ERR(data))
> -		return PTR_ERR(data);
> -
> -	return sprintf(buf, "%d\n", 1000 * data->temp[attr->index]);
> +	return err;
>  }
>  
>  static ssize_t alarm_mask_show(struct device *dev,
> @@ -650,98 +622,68 @@ static ssize_t alarm_mask_store(struct device *dev,
>  	return err < 0 ? err : count;
>  }
>  
> -static ssize_t fan_max_show(struct device *dev,
> -			    struct device_attribute *devattr, char *buf)
> +static int adt7470_fan_read(struct device *dev, u32 attr, int channel, long *val)
>  {
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = adt7470_update_device(dev);
>  
>  	if (IS_ERR(data))
>  		return PTR_ERR(data);
>  
> -	if (FAN_DATA_VALID(data->fan_max[attr->index]))
> -		return sprintf(buf, "%d\n",
> -			       FAN_PERIOD_TO_RPM(data->fan_max[attr->index]));
> -	else
> -		return sprintf(buf, "0\n");
> +	switch (attr) {
> +	case hwmon_fan_input:
> +		if (FAN_DATA_VALID(data->fan[channel]))
> +			*val = FAN_PERIOD_TO_RPM(data->fan[channel]);
> +		else
> +			*val = 0;
> +		break;
> +	case hwmon_fan_min:
> +		if (FAN_DATA_VALID(data->fan_min[channel]))
> +			*val = FAN_PERIOD_TO_RPM(data->fan_min[channel]);
> +		else
> +			*val = 0;
> +		break;
> +	case hwmon_fan_max:
> +		if (FAN_DATA_VALID(data->fan_max[channel]))
> +			*val = FAN_PERIOD_TO_RPM(data->fan_max[channel]);
> +		else
> +			*val = 0;
> +		break;
> +	case hwmon_fan_alarm:
> +		*val = !!(data->alarm & (1 << (12 + channel)));
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	return 0;
>  }
>  
> -static ssize_t fan_max_store(struct device *dev,
> -			     struct device_attribute *devattr,
> -			     const char *buf, size_t count)
> +static int adt7470_fan_write(struct device *dev, u32 attr, int channel, long val)
>  {
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	long temp;
>  	int err;
>  
> -	if (kstrtol(buf, 10, &temp) || !temp)
> -		return -EINVAL;
> +	val = FAN_RPM_TO_PERIOD(val);
> +	val = clamp_val(val, 1, 65534);
>  
> -	temp = FAN_RPM_TO_PERIOD(temp);
> -	temp = clamp_val(temp, 1, 65534);
> +	switch (attr) {
> +	case hwmon_fan_min:
> +		mutex_lock(&data->lock);
> +		data->fan_min[channel] = val;
> +		err = adt7470_write_word_data(data, ADT7470_REG_FAN_MIN(channel), val);
> +		mutex_unlock(&data->lock);
> +		break;
> +	case hwmon_fan_max:
> +		mutex_lock(&data->lock);
> +		data->fan_max[channel] = val;
> +		err = adt7470_write_word_data(data, ADT7470_REG_FAN_MAX(channel), val);
> +		mutex_unlock(&data->lock);
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
>  
> -	mutex_lock(&data->lock);
> -	data->fan_max[attr->index] = temp;
> -	err = adt7470_write_word_data(data, ADT7470_REG_FAN_MAX(attr->index), temp);
> -	mutex_unlock(&data->lock);
> -
> -	return err < 0 ? err : count;
> -}
> -
> -static ssize_t fan_min_show(struct device *dev,
> -			    struct device_attribute *devattr, char *buf)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = adt7470_update_device(dev);
> -
> -	if (IS_ERR(data))
> -		return PTR_ERR(data);
> -
> -	if (FAN_DATA_VALID(data->fan_min[attr->index]))
> -		return sprintf(buf, "%d\n",
> -			       FAN_PERIOD_TO_RPM(data->fan_min[attr->index]));
> -	else
> -		return sprintf(buf, "0\n");
> -}
> -
> -static ssize_t fan_min_store(struct device *dev,
> -			     struct device_attribute *devattr,
> -			     const char *buf, size_t count)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = dev_get_drvdata(dev);
> -	long temp;
> -	int err;
> -
> -	if (kstrtol(buf, 10, &temp) || !temp)
> -		return -EINVAL;
> -
> -	temp = FAN_RPM_TO_PERIOD(temp);
> -	temp = clamp_val(temp, 1, 65534);
> -
> -	mutex_lock(&data->lock);
> -	data->fan_min[attr->index] = temp;
> -	err = adt7470_write_word_data(data, ADT7470_REG_FAN_MIN(attr->index), temp);
> -	mutex_unlock(&data->lock);
> -
> -	return err < 0 ? err : count;
> -}
> -
> -static ssize_t fan_show(struct device *dev, struct device_attribute *devattr,
> -			char *buf)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = adt7470_update_device(dev);
> -
> -	if (IS_ERR(data))
> -		return PTR_ERR(data);
> -
> -	if (FAN_DATA_VALID(data->fan[attr->index]))
> -		return sprintf(buf, "%d\n",
> -			       FAN_PERIOD_TO_RPM(data->fan[attr->index]));
> -	else
> -		return sprintf(buf, "0\n");
> +	return err;
>  }
>  
>  static ssize_t force_pwm_max_show(struct device *dev,
> @@ -776,55 +718,18 @@ static ssize_t force_pwm_max_store(struct device *dev,
>  	return err < 0 ? err : count;
>  }
>  
> -static ssize_t pwm_show(struct device *dev, struct device_attribute *devattr,
> -			char *buf)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = adt7470_update_device(dev);
> -
> -	if (IS_ERR(data))
> -		return PTR_ERR(data);
> -
> -	return sprintf(buf, "%d\n", data->pwm[attr->index]);
> -}
> -
> -static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr,
> -			 const char *buf, size_t count)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = dev_get_drvdata(dev);
> -	long temp;
> -	int err;
> -
> -	if (kstrtol(buf, 10, &temp))
> -		return -EINVAL;
> -
> -	temp = clamp_val(temp, 0, 255);
> -
> -	mutex_lock(&data->lock);
> -	data->pwm[attr->index] = temp;
> -	err = regmap_write(data->regmap, ADT7470_REG_PWM(attr->index), temp);
> -	mutex_unlock(&data->lock);
> -
> -	return err < 0 ? err : count;
> -}
> -
>  /* These are the valid PWM frequencies to the nearest Hz */
>  static const int adt7470_freq_map[] = {
>  	11, 15, 22, 29, 35, 44, 59, 88, 1400, 22500
>  };
>  
> -static ssize_t pwm1_freq_show(struct device *dev,
> -			      struct device_attribute *devattr, char *buf)
> +static int pwm1_freq_get(struct device *dev)
>  {
> -	struct adt7470_data *data = adt7470_update_device(dev);
> +	struct adt7470_data *data = dev_get_drvdata(dev);
>  	unsigned int cfg_reg_1, cfg_reg_2;
>  	int index;
>  	int err;
>  
> -	if (IS_ERR(data))
> -		return PTR_ERR(data);
> -
>  	mutex_lock(&data->lock);
>  	err = regmap_read(data->regmap, ADT7470_REG_CFG, &cfg_reg_1);
>  	if (err < 0)
> @@ -840,26 +745,44 @@ static ssize_t pwm1_freq_show(struct device *dev,
>  	if (index >= ARRAY_SIZE(adt7470_freq_map))
>  		index = ARRAY_SIZE(adt7470_freq_map) - 1;
>  
> -	return scnprintf(buf, PAGE_SIZE, "%d\n", adt7470_freq_map[index]);
> +	return adt7470_freq_map[index];
>  
>  out:
>  	mutex_unlock(&data->lock);
>  	return err;
>  }
>  
> -static ssize_t pwm1_freq_store(struct device *dev,
> -			       struct device_attribute *devattr,
> -			       const char *buf, size_t count)
> +static int adt7470_pwm_read(struct device *dev, u32 attr, int channel, long *val)
> +{
> +	struct adt7470_data *data = adt7470_update_device(dev);
> +
> +	if (IS_ERR(data))
> +		return PTR_ERR(data);
> +
> +	switch (attr) {
> +	case hwmon_pwm_input:
> +		*val = data->pwm[channel];
> +		break;
> +	case hwmon_pwm_enable:
> +		*val = 1 + data->pwm_automatic[channel];
> +		break;
> +	case hwmon_pwm_freq:
> +		*val = pwm1_freq_get(dev);
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	return 0;
> +}
> +
> +static int pwm1_freq_set(struct device *dev, long freq)
>  {
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	long freq;
> +	unsigned int low_freq = ADT7470_CFG_LF;
>  	int index;
> -	int low_freq = ADT7470_CFG_LF;
>  	int err;
>  
> -	if (kstrtol(buf, 10, &freq))
> -		return -EINVAL;
> -
>  	/* Round the user value given to the closest available frequency */
>  	index = find_closest(freq, adt7470_freq_map,
>  			     ARRAY_SIZE(adt7470_freq_map));
> @@ -883,7 +806,50 @@ static ssize_t pwm1_freq_store(struct device *dev,
>  out:
>  	mutex_unlock(&data->lock);
>  
> -	return err < 0 ? err : count;
> +	return err;
> +}
> +
> +static int adt7470_pwm_write(struct device *dev, u32 attr, int channel, long val)
> +{
> +	struct adt7470_data *data = dev_get_drvdata(dev);
> +	unsigned int pwm_auto_reg_mask;
> +	int err;
> +
> +	switch (attr) {
> +	case hwmon_pwm_input:
> +		val = clamp_val(val, 0, 255);
> +		mutex_lock(&data->lock);
> +		data->pwm[channel] = val;
> +		err = regmap_write(data->regmap, ADT7470_REG_PWM(channel),
> +				   data->pwm[channel]);
> +		mutex_unlock(&data->lock);
> +		break;
> +	case hwmon_pwm_enable:
> +		if (channel % 2)
> +			pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK;
> +		else
> +			pwm_auto_reg_mask = ADT7470_PWM1_AUTO_MASK;
> +
> +		if (val != 2 && val != 1)
> +			return -EINVAL;
> +		val--;
> +
> +		mutex_lock(&data->lock);
> +		data->pwm_automatic[channel] = val;
> +		err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(channel),
> +				pwm_auto_reg_mask,
> +				val ? pwm_auto_reg_mask : 0);
> +		mutex_unlock(&data->lock);
> +		break;
> +	case hwmon_pwm_freq:
> +		err = pwm1_freq_set(dev, val);
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	return err;
> +
>  }
>  
>  static ssize_t pwm_max_show(struct device *dev,
> @@ -1005,50 +971,6 @@ static ssize_t pwm_tmin_store(struct device *dev,
>  	return err < 0 ? err : count;
>  }
>  
> -static ssize_t pwm_auto_show(struct device *dev,
> -			     struct device_attribute *devattr, char *buf)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = adt7470_update_device(dev);
> -
> -	if (IS_ERR(data))
> -		return PTR_ERR(data);
> -
> -	return sprintf(buf, "%d\n", 1 + data->pwm_automatic[attr->index]);
> -}
> -
> -static ssize_t pwm_auto_store(struct device *dev,
> -			      struct device_attribute *devattr,
> -			      const char *buf, size_t count)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = dev_get_drvdata(dev);
> -	int pwm_auto_reg_mask;
> -	long temp;
> -	int err;
> -
> -	if (kstrtol(buf, 10, &temp))
> -		return -EINVAL;
> -
> -	if (attr->index % 2)
> -		pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK;
> -	else
> -		pwm_auto_reg_mask = ADT7470_PWM1_AUTO_MASK;
> -
> -	if (temp != 2 && temp != 1)
> -		return -EINVAL;
> -	temp--;
> -
> -	mutex_lock(&data->lock);
> -	data->pwm_automatic[attr->index] = temp;
> -	err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(attr->index),
> -				 pwm_auto_reg_mask,
> -				 temp ? pwm_auto_reg_mask : 0);
> -	mutex_unlock(&data->lock);
> -
> -	return err < 0 ? err : count;
> -}
> -
>  static ssize_t pwm_auto_temp_show(struct device *dev,
>  				  struct device_attribute *devattr, char *buf)
>  {
> @@ -1110,98 +1032,12 @@ static ssize_t pwm_auto_temp_store(struct device *dev,
>  	return err < 0 ? err : count;
>  }
>  
> -static ssize_t alarm_show(struct device *dev,
> -			  struct device_attribute *devattr, char *buf)
> -{
> -	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> -	struct adt7470_data *data = adt7470_update_device(dev);
> -
> -	if (IS_ERR(data))
> -		return PTR_ERR(data);
> -
> -	if (data->alarm & attr->index)
> -		return sprintf(buf, "1\n");
> -	else
> -		return sprintf(buf, "0\n");
> -}
> -
>  static DEVICE_ATTR_RW(alarm_mask);
>  static DEVICE_ATTR_RW(num_temp_sensors);
>  static DEVICE_ATTR_RW(auto_update_interval);
>  
> -static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
> -static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
> -static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2);
> -static SENSOR_DEVICE_ATTR_RW(temp4_max, temp_max, 3);
> -static SENSOR_DEVICE_ATTR_RW(temp5_max, temp_max, 4);
> -static SENSOR_DEVICE_ATTR_RW(temp6_max, temp_max, 5);
> -static SENSOR_DEVICE_ATTR_RW(temp7_max, temp_max, 6);
> -static SENSOR_DEVICE_ATTR_RW(temp8_max, temp_max, 7);
> -static SENSOR_DEVICE_ATTR_RW(temp9_max, temp_max, 8);
> -static SENSOR_DEVICE_ATTR_RW(temp10_max, temp_max, 9);
> -
> -static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0);
> -static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1);
> -static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2);
> -static SENSOR_DEVICE_ATTR_RW(temp4_min, temp_min, 3);
> -static SENSOR_DEVICE_ATTR_RW(temp5_min, temp_min, 4);
> -static SENSOR_DEVICE_ATTR_RW(temp6_min, temp_min, 5);
> -static SENSOR_DEVICE_ATTR_RW(temp7_min, temp_min, 6);
> -static SENSOR_DEVICE_ATTR_RW(temp8_min, temp_min, 7);
> -static SENSOR_DEVICE_ATTR_RW(temp9_min, temp_min, 8);
> -static SENSOR_DEVICE_ATTR_RW(temp10_min, temp_min, 9);
> -
> -static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
> -static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
> -static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
> -static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3);
> -static SENSOR_DEVICE_ATTR_RO(temp5_input, temp, 4);
> -static SENSOR_DEVICE_ATTR_RO(temp6_input, temp, 5);
> -static SENSOR_DEVICE_ATTR_RO(temp7_input, temp, 6);
> -static SENSOR_DEVICE_ATTR_RO(temp8_input, temp, 7);
> -static SENSOR_DEVICE_ATTR_RO(temp9_input, temp, 8);
> -static SENSOR_DEVICE_ATTR_RO(temp10_input, temp, 9);
> -
> -static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, ADT7470_R1T_ALARM);
> -static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, ADT7470_R2T_ALARM);
> -static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, ADT7470_R3T_ALARM);
> -static SENSOR_DEVICE_ATTR_RO(temp4_alarm, alarm, ADT7470_R4T_ALARM);
> -static SENSOR_DEVICE_ATTR_RO(temp5_alarm, alarm, ADT7470_R5T_ALARM);
> -static SENSOR_DEVICE_ATTR_RO(temp6_alarm, alarm, ADT7470_R6T_ALARM);
> -static SENSOR_DEVICE_ATTR_RO(temp7_alarm, alarm, ADT7470_R7T_ALARM);
> -static SENSOR_DEVICE_ATTR_RO(temp8_alarm, alarm, ALARM2(ADT7470_R8T_ALARM));
> -static SENSOR_DEVICE_ATTR_RO(temp9_alarm, alarm, ALARM2(ADT7470_R9T_ALARM));
> -static SENSOR_DEVICE_ATTR_RO(temp10_alarm, alarm, ALARM2(ADT7470_R10T_ALARM));
> -
> -static SENSOR_DEVICE_ATTR_RW(fan1_max, fan_max, 0);
> -static SENSOR_DEVICE_ATTR_RW(fan2_max, fan_max, 1);
> -static SENSOR_DEVICE_ATTR_RW(fan3_max, fan_max, 2);
> -static SENSOR_DEVICE_ATTR_RW(fan4_max, fan_max, 3);
> -
> -static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
> -static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
> -static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2);
> -static SENSOR_DEVICE_ATTR_RW(fan4_min, fan_min, 3);
> -
> -static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
> -static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
> -static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2);
> -static SENSOR_DEVICE_ATTR_RO(fan4_input, fan, 3);
> -
> -static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, ALARM2(ADT7470_FAN1_ALARM));
> -static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, ALARM2(ADT7470_FAN2_ALARM));
> -static SENSOR_DEVICE_ATTR_RO(fan3_alarm, alarm, ALARM2(ADT7470_FAN3_ALARM));
> -static SENSOR_DEVICE_ATTR_RO(fan4_alarm, alarm, ALARM2(ADT7470_FAN4_ALARM));
> -
>  static SENSOR_DEVICE_ATTR_RW(force_pwm_max, force_pwm_max, 0);
>  
> -static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
> -static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1);
> -static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, 2);
> -static SENSOR_DEVICE_ATTR_RW(pwm4, pwm, 3);
> -
> -static DEVICE_ATTR_RW(pwm1_freq);
> -
>  static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_pwm, pwm_min, 0);
>  static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point1_pwm, pwm_min, 1);
>  static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point1_pwm, pwm_min, 2);
> @@ -1222,11 +1058,6 @@ static SENSOR_DEVICE_ATTR_RO(pwm2_auto_point2_temp, pwm_tmax, 1);
>  static SENSOR_DEVICE_ATTR_RO(pwm3_auto_point2_temp, pwm_tmax, 2);
>  static SENSOR_DEVICE_ATTR_RO(pwm4_auto_point2_temp, pwm_tmax, 3);
>  
> -static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_auto, 0);
> -static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_auto, 1);
> -static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_auto, 2);
> -static SENSOR_DEVICE_ATTR_RW(pwm4_enable, pwm_auto, 3);
> -
>  static SENSOR_DEVICE_ATTR_RW(pwm1_auto_channels_temp, pwm_auto_temp, 0);
>  static SENSOR_DEVICE_ATTR_RW(pwm2_auto_channels_temp, pwm_auto_temp, 1);
>  static SENSOR_DEVICE_ATTR_RW(pwm3_auto_channels_temp, pwm_auto_temp, 2);
> @@ -1236,68 +1067,7 @@ static struct attribute *adt7470_attrs[] = {
>  	&dev_attr_alarm_mask.attr,
>  	&dev_attr_num_temp_sensors.attr,
>  	&dev_attr_auto_update_interval.attr,
> -	&sensor_dev_attr_temp1_max.dev_attr.attr,
> -	&sensor_dev_attr_temp2_max.dev_attr.attr,
> -	&sensor_dev_attr_temp3_max.dev_attr.attr,
> -	&sensor_dev_attr_temp4_max.dev_attr.attr,
> -	&sensor_dev_attr_temp5_max.dev_attr.attr,
> -	&sensor_dev_attr_temp6_max.dev_attr.attr,
> -	&sensor_dev_attr_temp7_max.dev_attr.attr,
> -	&sensor_dev_attr_temp8_max.dev_attr.attr,
> -	&sensor_dev_attr_temp9_max.dev_attr.attr,
> -	&sensor_dev_attr_temp10_max.dev_attr.attr,
> -	&sensor_dev_attr_temp1_min.dev_attr.attr,
> -	&sensor_dev_attr_temp2_min.dev_attr.attr,
> -	&sensor_dev_attr_temp3_min.dev_attr.attr,
> -	&sensor_dev_attr_temp4_min.dev_attr.attr,
> -	&sensor_dev_attr_temp5_min.dev_attr.attr,
> -	&sensor_dev_attr_temp6_min.dev_attr.attr,
> -	&sensor_dev_attr_temp7_min.dev_attr.attr,
> -	&sensor_dev_attr_temp8_min.dev_attr.attr,
> -	&sensor_dev_attr_temp9_min.dev_attr.attr,
> -	&sensor_dev_attr_temp10_min.dev_attr.attr,
> -	&sensor_dev_attr_temp1_input.dev_attr.attr,
> -	&sensor_dev_attr_temp2_input.dev_attr.attr,
> -	&sensor_dev_attr_temp3_input.dev_attr.attr,
> -	&sensor_dev_attr_temp4_input.dev_attr.attr,
> -	&sensor_dev_attr_temp5_input.dev_attr.attr,
> -	&sensor_dev_attr_temp6_input.dev_attr.attr,
> -	&sensor_dev_attr_temp7_input.dev_attr.attr,
> -	&sensor_dev_attr_temp8_input.dev_attr.attr,
> -	&sensor_dev_attr_temp9_input.dev_attr.attr,
> -	&sensor_dev_attr_temp10_input.dev_attr.attr,
> -	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
> -	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
> -	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
> -	&sensor_dev_attr_temp4_alarm.dev_attr.attr,
> -	&sensor_dev_attr_temp5_alarm.dev_attr.attr,
> -	&sensor_dev_attr_temp6_alarm.dev_attr.attr,
> -	&sensor_dev_attr_temp7_alarm.dev_attr.attr,
> -	&sensor_dev_attr_temp8_alarm.dev_attr.attr,
> -	&sensor_dev_attr_temp9_alarm.dev_attr.attr,
> -	&sensor_dev_attr_temp10_alarm.dev_attr.attr,
> -	&sensor_dev_attr_fan1_max.dev_attr.attr,
> -	&sensor_dev_attr_fan2_max.dev_attr.attr,
> -	&sensor_dev_attr_fan3_max.dev_attr.attr,
> -	&sensor_dev_attr_fan4_max.dev_attr.attr,
> -	&sensor_dev_attr_fan1_min.dev_attr.attr,
> -	&sensor_dev_attr_fan2_min.dev_attr.attr,
> -	&sensor_dev_attr_fan3_min.dev_attr.attr,
> -	&sensor_dev_attr_fan4_min.dev_attr.attr,
> -	&sensor_dev_attr_fan1_input.dev_attr.attr,
> -	&sensor_dev_attr_fan2_input.dev_attr.attr,
> -	&sensor_dev_attr_fan3_input.dev_attr.attr,
> -	&sensor_dev_attr_fan4_input.dev_attr.attr,
> -	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
> -	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
> -	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
> -	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
>  	&sensor_dev_attr_force_pwm_max.dev_attr.attr,
> -	&sensor_dev_attr_pwm1.dev_attr.attr,
> -	&dev_attr_pwm1_freq.attr,
> -	&sensor_dev_attr_pwm2.dev_attr.attr,
> -	&sensor_dev_attr_pwm3.dev_attr.attr,
> -	&sensor_dev_attr_pwm4.dev_attr.attr,
>  	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
>  	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
>  	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
> @@ -1314,10 +1084,6 @@ static struct attribute *adt7470_attrs[] = {
>  	&sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr,
> -	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
> -	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
> -	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
> -	&sensor_dev_attr_pwm4_enable.dev_attr.attr,
>  	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
>  	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
>  	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
> @@ -1327,6 +1093,129 @@ static struct attribute *adt7470_attrs[] = {
>  
>  ATTRIBUTE_GROUPS(adt7470);
>  
> +static int adt7470_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> +			int channel, long *val)
> +{
> +	switch (type) {
> +	case hwmon_temp:
> +		return adt7470_temp_read(dev, attr, channel, val);
> +	case hwmon_fan:
> +		return adt7470_fan_read(dev, attr, channel, val);
> +	case hwmon_pwm:
> +		return adt7470_pwm_read(dev, attr, channel, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int adt7470_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> +			int channel, long val)
> +{
> +	switch (type) {
> +	case hwmon_temp:
> +		return adt7470_temp_write(dev, attr, channel, val);
> +	case hwmon_fan:
> +		return adt7470_fan_write(dev, attr, channel, val);
> +	case hwmon_pwm:
> +		return adt7470_pwm_write(dev, attr, channel, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static umode_t adt7470_is_visible(const void *_data, enum hwmon_sensor_types type,
> +				  u32 attr, int channel)
> +{
> +	umode_t mode = 0;
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (attr) {
> +		case hwmon_temp:
> +		case hwmon_temp_alarm:
> +			mode = 0444;
> +			break;
> +		case hwmon_temp_min:
> +		case hwmon_temp_max:
> +			mode = 0644;
> +			break;
> +		default:
> +			break;
> +		}
> +		break;
> +	case hwmon_fan:
> +		switch (attr) {
> +		case hwmon_fan_input:
> +		case hwmon_fan_alarm:
> +			mode = 0444;
> +			break;
> +		case hwmon_fan_min:
> +		case hwmon_fan_max:
> +			mode = 0644;
> +			break;
> +		default:
> +			break;
> +		}
> +		break;
> +	case hwmon_pwm:
> +		switch (attr) {
> +		case hwmon_pwm_input:
> +		case hwmon_pwm_enable:
> +			mode = 0644;
> +			break;
> +		case hwmon_pwm_freq:
> +			if (channel == 0)
> +				mode = 0644;
> +			else
> +				mode = 0;
> +			break;
> +		default:
> +			break;
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return mode;
> +}
> +
> +static const struct hwmon_ops adt7470_hwmon_ops = {
> +	.is_visible = adt7470_is_visible,
> +	.read = adt7470_read,
> +	.write = adt7470_write,
> +};
> +
> +static const struct hwmon_channel_info *adt7470_info[] = {
> +	HWMON_CHANNEL_INFO(temp,
> +			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
> +			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
> +			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
> +			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
> +			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
> +			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
> +			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
> +			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
> +			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
> +			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM),
> +	HWMON_CHANNEL_INFO(fan,
> +			HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM,
> +			HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM,
> +			HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM,
> +			HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM),
> +	HWMON_CHANNEL_INFO(pwm,
> +			HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_FREQ,
> +			HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
> +			HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
> +			HWMON_PWM_INPUT | HWMON_PWM_ENABLE),
> +	NULL
> +};
> +
> +static const struct hwmon_chip_info adt7470_chip_info = {
> +	.ops = &adt7470_hwmon_ops,
> +	.info = adt7470_info,
> +};
> +
>  /* Return 0 if detection is successful, -ENODEV otherwise */
>  static int adt7470_detect(struct i2c_client *client,
>  			  struct i2c_board_info *info)
> @@ -1391,9 +1280,9 @@ static int adt7470_probe(struct i2c_client *client)
>  		return err;
>  
>  	/* Register sysfs hooks */
> -	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
> -							   data,
> -							   adt7470_groups);
> +	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data,
> +							 &adt7470_chip_info,
> +							 adt7470_groups);
>  
>  	if (IS_ERR(hwmon_dev))
>  		return PTR_ERR(hwmon_dev);

Re: [PATCH v2 4/4] hwmon: (adt7470) Use standard update_interval property

[Guenter Roeck]

On Thu, Aug 26, 2021 at 02:41:21PM +1200, Chris Packham wrote:
> Instead of the non-standard auto_update_interval make use of the
> update_interval property that is supported by the hwmon core.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> 
> Notes:
>     I kind of anticipate a NAK on this because it affects the ABI. But I figured
>     I'd run it past the ML to see if moving towards the hwmon core is worth the hit
>     in ABI compatibility.
>     
I personally don't mind (most likely no one is using it anyway), but let's
wait until after the upcoming commit window closes to give people time to
complain.

Guenter

>     Changes in v2:
>     - none
> 
>  drivers/hwmon/adt7470.c | 64 +++++++++++++++++++++++++----------------
>  1 file changed, 39 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
> index db19a52b13de..7afbd1e4721e 100644
> --- a/drivers/hwmon/adt7470.c
> +++ b/drivers/hwmon/adt7470.c
> @@ -469,35 +469,37 @@ static struct adt7470_data *adt7470_update_device(struct device *dev)
>  	return err < 0 ? ERR_PTR(err) : data;
>  }
>  
> -static ssize_t auto_update_interval_show(struct device *dev,
> -					 struct device_attribute *devattr,
> -					 char *buf)
> -{
> -	struct adt7470_data *data = adt7470_update_device(dev);
> -
> -	if (IS_ERR(data))
> -		return PTR_ERR(data);
> -
> -	return sprintf(buf, "%d\n", data->auto_update_interval);
> -}
> -
> -static ssize_t auto_update_interval_store(struct device *dev,
> -					  struct device_attribute *devattr,
> -					  const char *buf, size_t count)
> +static int adt7470_chip_read(struct device *dev, u32 attr, long *val)
>  {
>  	struct adt7470_data *data = dev_get_drvdata(dev);
> -	long temp;
>  
> -	if (kstrtol(buf, 10, &temp))
> -		return -EINVAL;
> +	switch (attr) {
> +	case hwmon_chip_update_interval:
> +		*val = data->auto_update_interval;
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
>  
> -	temp = clamp_val(temp, 0, 60000);
> +	return 0;
> +}
>  
> -	mutex_lock(&data->lock);
> -	data->auto_update_interval = temp;
> -	mutex_unlock(&data->lock);
> +static int adt7470_chip_write(struct device *dev, u32 attr, long val)
> +{
> +	struct adt7470_data *data = dev_get_drvdata(dev);
>  
> -	return count;
> +	switch (attr) {
> +	case hwmon_chip_update_interval:
> +		val = clamp_val(val, 0, 60000);
> +		mutex_lock(&data->lock);
> +		data->auto_update_interval = val;
> +		mutex_unlock(&data->lock);
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	return 0;
>  }
>  
>  static ssize_t num_temp_sensors_show(struct device *dev,
> @@ -1034,7 +1036,6 @@ static ssize_t pwm_auto_temp_store(struct device *dev,
>  
>  static DEVICE_ATTR_RW(alarm_mask);
>  static DEVICE_ATTR_RW(num_temp_sensors);
> -static DEVICE_ATTR_RW(auto_update_interval);
>  
>  static SENSOR_DEVICE_ATTR_RW(force_pwm_max, force_pwm_max, 0);
>  
> @@ -1066,7 +1067,6 @@ static SENSOR_DEVICE_ATTR_RW(pwm4_auto_channels_temp, pwm_auto_temp, 3);
>  static struct attribute *adt7470_attrs[] = {
>  	&dev_attr_alarm_mask.attr,
>  	&dev_attr_num_temp_sensors.attr,
> -	&dev_attr_auto_update_interval.attr,
>  	&sensor_dev_attr_force_pwm_max.dev_attr.attr,
>  	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
>  	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
> @@ -1097,6 +1097,8 @@ static int adt7470_read(struct device *dev, enum hwmon_sensor_types type, u32 at
>  			int channel, long *val)
>  {
>  	switch (type) {
> +	case hwmon_chip:
> +		return adt7470_chip_read(dev, attr, val);
>  	case hwmon_temp:
>  		return adt7470_temp_read(dev, attr, channel, val);
>  	case hwmon_fan:
> @@ -1112,6 +1114,8 @@ static int adt7470_write(struct device *dev, enum hwmon_sensor_types type, u32 a
>  			int channel, long val)
>  {
>  	switch (type) {
> +	case hwmon_chip:
> +		return adt7470_chip_write(dev, attr, val);
>  	case hwmon_temp:
>  		return adt7470_temp_write(dev, attr, channel, val);
>  	case hwmon_fan:
> @@ -1129,6 +1133,15 @@ static umode_t adt7470_is_visible(const void *_data, enum hwmon_sensor_types typ
>  	umode_t mode = 0;
>  
>  	switch (type) {
> +	case hwmon_chip:
> +		switch (attr) {
> +		case hwmon_chip_update_interval:
> +			mode = 0644;
> +			break;
> +		default:
> +			break;
> +		}
> +		break;
>  	case hwmon_temp:
>  		switch (attr) {
>  		case hwmon_temp:
> @@ -1187,6 +1200,7 @@ static const struct hwmon_ops adt7470_hwmon_ops = {
>  };
>  
>  static const struct hwmon_channel_info *adt7470_info[] = {
> +	HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
>  	HWMON_CHANNEL_INFO(temp,
>  			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
>  			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,

Re: [PATCH v2 4/4] hwmon: (adt7470) Use standard update_interval property

[Chris Packham]

On 28/08/21 9:29 am, Guenter Roeck wrote:
> On Thu, Aug 26, 2021 at 02:41:21PM +1200, Chris Packham wrote:
>> Instead of the non-standard auto_update_interval make use of the
>> update_interval property that is supported by the hwmon core.
>>
>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>> ---
>>
>> Notes:
>>      I kind of anticipate a NAK on this because it affects the ABI. But I figured
>>      I'd run it past the ML to see if moving towards the hwmon core is worth the hit
>>      in ABI compatibility.
>>      
> I personally don't mind (most likely no one is using it anyway), but let's
> wait until after the upcoming commit window closes to give people time to
> complain.

I know of one application using this sysfs entry. But it's our in-house 
environmental monitoring code so if this gets merged I'll just update it 
to use the new path.

One thought I had was we could do both. i.e. have an entry that conforms 
to the hwmon core and a backwards compatible entry that just aliases the 
new path.

>
> Guenter
>
>>      Changes in v2:
>>      - none
>>
>>   drivers/hwmon/adt7470.c | 64 +++++++++++++++++++++++++----------------
>>   1 file changed, 39 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
>> index db19a52b13de..7afbd1e4721e 100644
>> --- a/drivers/hwmon/adt7470.c
>> +++ b/drivers/hwmon/adt7470.c
>> @@ -469,35 +469,37 @@ static struct adt7470_data *adt7470_update_device(struct device *dev)
>>   	return err < 0 ? ERR_PTR(err) : data;
>>   }
>>   
>> -static ssize_t auto_update_interval_show(struct device *dev,
>> -					 struct device_attribute *devattr,
>> -					 char *buf)
>> -{
>> -	struct adt7470_data *data = adt7470_update_device(dev);
>> -
>> -	if (IS_ERR(data))
>> -		return PTR_ERR(data);
>> -
>> -	return sprintf(buf, "%d\n", data->auto_update_interval);
>> -}
>> -
>> -static ssize_t auto_update_interval_store(struct device *dev,
>> -					  struct device_attribute *devattr,
>> -					  const char *buf, size_t count)
>> +static int adt7470_chip_read(struct device *dev, u32 attr, long *val)
>>   {
>>   	struct adt7470_data *data = dev_get_drvdata(dev);
>> -	long temp;
>>   
>> -	if (kstrtol(buf, 10, &temp))
>> -		return -EINVAL;
>> +	switch (attr) {
>> +	case hwmon_chip_update_interval:
>> +		*val = data->auto_update_interval;
>> +		break;
>> +	default:
>> +		return -EOPNOTSUPP;
>> +	}
>>   
>> -	temp = clamp_val(temp, 0, 60000);
>> +	return 0;
>> +}
>>   
>> -	mutex_lock(&data->lock);
>> -	data->auto_update_interval = temp;
>> -	mutex_unlock(&data->lock);
>> +static int adt7470_chip_write(struct device *dev, u32 attr, long val)
>> +{
>> +	struct adt7470_data *data = dev_get_drvdata(dev);
>>   
>> -	return count;
>> +	switch (attr) {
>> +	case hwmon_chip_update_interval:
>> +		val = clamp_val(val, 0, 60000);
>> +		mutex_lock(&data->lock);
>> +		data->auto_update_interval = val;
>> +		mutex_unlock(&data->lock);
>> +		break;
>> +	default:
>> +		return -EOPNOTSUPP;
>> +	}
>> +
>> +	return 0;
>>   }
>>   
>>   static ssize_t num_temp_sensors_show(struct device *dev,
>> @@ -1034,7 +1036,6 @@ static ssize_t pwm_auto_temp_store(struct device *dev,
>>   
>>   static DEVICE_ATTR_RW(alarm_mask);
>>   static DEVICE_ATTR_RW(num_temp_sensors);
>> -static DEVICE_ATTR_RW(auto_update_interval);
>>   
>>   static SENSOR_DEVICE_ATTR_RW(force_pwm_max, force_pwm_max, 0);
>>   
>> @@ -1066,7 +1067,6 @@ static SENSOR_DEVICE_ATTR_RW(pwm4_auto_channels_temp, pwm_auto_temp, 3);
>>   static struct attribute *adt7470_attrs[] = {
>>   	&dev_attr_alarm_mask.attr,
>>   	&dev_attr_num_temp_sensors.attr,
>> -	&dev_attr_auto_update_interval.attr,
>>   	&sensor_dev_attr_force_pwm_max.dev_attr.attr,
>>   	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
>>   	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
>> @@ -1097,6 +1097,8 @@ static int adt7470_read(struct device *dev, enum hwmon_sensor_types type, u32 at
>>   			int channel, long *val)
>>   {
>>   	switch (type) {
>> +	case hwmon_chip:
>> +		return adt7470_chip_read(dev, attr, val);
>>   	case hwmon_temp:
>>   		return adt7470_temp_read(dev, attr, channel, val);
>>   	case hwmon_fan:
>> @@ -1112,6 +1114,8 @@ static int adt7470_write(struct device *dev, enum hwmon_sensor_types type, u32 a
>>   			int channel, long val)
>>   {
>>   	switch (type) {
>> +	case hwmon_chip:
>> +		return adt7470_chip_write(dev, attr, val);
>>   	case hwmon_temp:
>>   		return adt7470_temp_write(dev, attr, channel, val);
>>   	case hwmon_fan:
>> @@ -1129,6 +1133,15 @@ static umode_t adt7470_is_visible(const void *_data, enum hwmon_sensor_types typ
>>   	umode_t mode = 0;
>>   
>>   	switch (type) {
>> +	case hwmon_chip:
>> +		switch (attr) {
>> +		case hwmon_chip_update_interval:
>> +			mode = 0644;
>> +			break;
>> +		default:
>> +			break;
>> +		}
>> +		break;
>>   	case hwmon_temp:
>>   		switch (attr) {
>>   		case hwmon_temp:
>> @@ -1187,6 +1200,7 @@ static const struct hwmon_ops adt7470_hwmon_ops = {
>>   };
>>   
>>   static const struct hwmon_channel_info *adt7470_info[] = {
>> +	HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
>>   	HWMON_CHANNEL_INFO(temp,
>>   			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,
>>   			HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM,

Re: [PATCH v2 4/4] hwmon: (adt7470) Use standard update_interval property

[Guenter Roeck]

On 8/29/21 2:09 PM, Chris Packham wrote:
> 
> On 28/08/21 9:29 am, Guenter Roeck wrote:
>> On Thu, Aug 26, 2021 at 02:41:21PM +1200, Chris Packham wrote:
>>> Instead of the non-standard auto_update_interval make use of the
>>> update_interval property that is supported by the hwmon core.
>>>
>>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>>> ---
>>>
>>> Notes:
>>>       I kind of anticipate a NAK on this because it affects the ABI. But I figured
>>>       I'd run it past the ML to see if moving towards the hwmon core is worth the hit
>>>       in ABI compatibility.
>>>       
>> I personally don't mind (most likely no one is using it anyway), but let's
>> wait until after the upcoming commit window closes to give people time to
>> complain.
> 
> I know of one application using this sysfs entry. But it's our in-house
> environmental monitoring code so if this gets merged I'll just update it
> to use the new path.
> 
> One thought I had was we could do both. i.e. have an entry that conforms
> to the hwmon core and a backwards compatible entry that just aliases the
> new path.
> 
Now you almost convinced me to indeed reject this patch. The idea of the new API
is to simplify driver code, not to make it more complicated. If we can't simplify
the code, it is better to leave it alone.

Guenter

Re: [PATCH v2 4/4] hwmon: (adt7470) Use standard update_interval property

[Chris Packham]

On 31/08/21 3:36 am, Guenter Roeck wrote:
> On 8/29/21 2:09 PM, Chris Packham wrote:
>>
>> On 28/08/21 9:29 am, Guenter Roeck wrote:
>>> On Thu, Aug 26, 2021 at 02:41:21PM +1200, Chris Packham wrote:
>>>> Instead of the non-standard auto_update_interval make use of the
>>>> update_interval property that is supported by the hwmon core.
>>>>
>>>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>>>> ---
>>>>
>>>> Notes:
>>>>       I kind of anticipate a NAK on this because it affects the 
>>>> ABI. But I figured
>>>>       I'd run it past the ML to see if moving towards the hwmon 
>>>> core is worth the hit
>>>>       in ABI compatibility.
>>> I personally don't mind (most likely no one is using it anyway), but 
>>> let's
>>> wait until after the upcoming commit window closes to give people 
>>> time to
>>> complain.
>>
>> I know of one application using this sysfs entry. But it's our in-house
>> environmental monitoring code so if this gets merged I'll just update it
>> to use the new path.
>>
>> One thought I had was we could do both. i.e. have an entry that conforms
>> to the hwmon core and a backwards compatible entry that just aliases the
>> new path.
>>
> Now you almost convinced me to indeed reject this patch. The idea of 
> the new API
> is to simplify driver code, not to make it more complicated. If we 
> can't simplify
> the code, it is better to leave it alone.
Sold. I agree what I've just suggested is adding more complexity without 
much gain. If something does start to care about having a standard 
update_interval property we could resurrect this.
>
> Guenter