* [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds
@ 2014-06-09 22:52 ` Marcel Ziswiler
0 siblings, 0 replies; 14+ messages in thread
From: Marcel Ziswiler @ 2014-06-09 22:52 UTC (permalink / raw)
To: swarren, thierry.reding
Cc: devicetree, linux, linux-kernel, stefan, Marcel Ziswiler,
linux-tegra, linux-arm-kernel
The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
buses and PWM LEDs generically accessible from user space and an
LM95245 temperature sensor chip. The later four can also be found on
the Colibri T30 module.
While at it move the PCA953x GPIO entry down to its proper place to
have it all nicely ordered again.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
Changes since v1:
- Forget about spidev for now.
arch/arm/configs/tegra_defconfig | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index fb25e29..d05eec8 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -23,7 +23,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_GPIO_PCA953X=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
@@ -111,6 +110,7 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
+CONFIG_IGB=y
CONFIG_R8169=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
@@ -125,6 +125,8 @@ CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
# CONFIG_LEGACY_PTYS is not set
@@ -135,6 +137,7 @@ CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_TEGRA=y
@@ -144,6 +147,7 @@ CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TPS6586X=y
@@ -155,10 +159,12 @@ CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM95245=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_MAX8907=y
+CONFIG_MFD_STMPE=y
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS6586X=y
@@ -221,6 +227,7 @@ CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds
@ 2014-06-09 22:52 ` Marcel Ziswiler
0 siblings, 0 replies; 14+ messages in thread
From: Marcel Ziswiler @ 2014-06-09 22:52 UTC (permalink / raw)
To: swarren, thierry.reding
Cc: linux, devicetree, linux-arm-kernel, linux-kernel, linux-tegra,
stefan, Marcel Ziswiler
The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
buses and PWM LEDs generically accessible from user space and an
LM95245 temperature sensor chip. The later four can also be found on
the Colibri T30 module.
While at it move the PCA953x GPIO entry down to its proper place to
have it all nicely ordered again.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
Changes since v1:
- Forget about spidev for now.
arch/arm/configs/tegra_defconfig | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index fb25e29..d05eec8 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -23,7 +23,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_GPIO_PCA953X=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
@@ -111,6 +110,7 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
+CONFIG_IGB=y
CONFIG_R8169=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
@@ -125,6 +125,8 @@ CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
# CONFIG_LEGACY_PTYS is not set
@@ -135,6 +137,7 @@ CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_TEGRA=y
@@ -144,6 +147,7 @@ CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TPS6586X=y
@@ -155,10 +159,12 @@ CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM95245=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_MAX8907=y
+CONFIG_MFD_STMPE=y
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS6586X=y
@@ -221,6 +227,7 @@ CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds
@ 2014-06-09 22:52 ` Marcel Ziswiler
0 siblings, 0 replies; 14+ messages in thread
From: Marcel Ziswiler @ 2014-06-09 22:52 UTC (permalink / raw)
To: linux-arm-kernel
The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
buses and PWM LEDs generically accessible from user space and an
LM95245 temperature sensor chip. The later four can also be found on
the Colibri T30 module.
While at it move the PCA953x GPIO entry down to its proper place to
have it all nicely ordered again.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
Changes since v1:
- Forget about spidev for now.
arch/arm/configs/tegra_defconfig | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index fb25e29..d05eec8 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -23,7 +23,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_GPIO_PCA953X=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
@@ -111,6 +110,7 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
+CONFIG_IGB=y
CONFIG_R8169=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
@@ -125,6 +125,8 @@ CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
# CONFIG_LEGACY_PTYS is not set
@@ -135,6 +137,7 @@ CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_TEGRA=y
@@ -144,6 +147,7 @@ CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TPS6586X=y
@@ -155,10 +159,12 @@ CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM95245=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_MAX8907=y
+CONFIG_MFD_STMPE=y
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS6586X=y
@@ -221,6 +227,7 @@ CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 3/3] arm: tegra: initial support for apalis t30
2014-06-09 22:52 ` Marcel Ziswiler
@ 2014-06-09 22:52 ` Marcel Ziswiler
-1 siblings, 0 replies; 14+ messages in thread
From: Marcel Ziswiler @ 2014-06-09 22:52 UTC (permalink / raw)
To: swarren, thierry.reding
Cc: linux, devicetree, linux-arm-kernel, linux-kernel, linux-tegra,
stefan, Marcel Ziswiler
This patch adds the device tree to support Toradex Apalis T30, a
computer on module which can be used on different carrier boards.
The module consists of a Tegra 3 SoC, two PMICs, 1 or 2 GB of DDR3L
RAM, eMMC, an LM95245 temperature sensor chip, an i210 resp. i211
gigabit Ethernet controller, an STMPE811 ADC/touch controller as well
as two MCP2515 CAN controllers. Furthermore, there is an SGTL5000 audio
codec which is not yet supported. Anything that is not self contained
on the module is disabled by default.
The device tree for the Evaluation Board includes the modules device
tree and enables the supported peripherals of the carrier board (the
Evaluation Board supports almost all of them).
While at it also add the device tree binding documentation for Apalis
T30.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
Changes since v1:
- Drop binding documentation not related to Apalis support.
- Add blank lines between nodes.
- Put status properties first.
- Drop unused sdhci labels.
- Drop blank lines between related properties.
- Sort PWM nodes alphanumerically.
- Start regulator numbering at 0.
- Drop spidev nodes considered evil.
Documentation/devicetree/bindings/arm/tegra.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/tegra30-apalis-eval.dts | 258 +++++++++
arch/arm/boot/dts/tegra30-apalis.dtsi | 673 +++++++++++++++++++++++
4 files changed, 934 insertions(+)
create mode 100644 arch/arm/boot/dts/tegra30-apalis-eval.dts
create mode 100644 arch/arm/boot/dts/tegra30-apalis.dtsi
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt
index 558ed4b..73278c6 100644
--- a/Documentation/devicetree/bindings/arm/tegra.txt
+++ b/Documentation/devicetree/bindings/arm/tegra.txt
@@ -30,6 +30,8 @@ board-specific compatible values:
nvidia,seaboard
nvidia,ventana
nvidia,whistler
+ toradex,apalis_t30
+ toradex,apalis_t30-eval
toradex,colibri_t20-512
toradex,iris
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c1a257a..333ac53 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -364,6 +364,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-whistler.dtb \
+ tegra30-apalis-eval.dtb \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
new file mode 100644
index 0000000..347cc60
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -0,0 +1,258 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis.dtsi"
+
+/ {
+ model = "Toradex Apalis T30 on Apalis Evaluation Board";
+ compatible = "toradex,apalis_t30-eval", "nvidia,tegra30";
+
+ aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/tps65911@2d";
+ rtc2 = "/rtc@7000e000";
+ };
+
+ pcie-controller@00003000 {
+ status = "okay";
+
+ pci@1,0 {
+ status = "okay";
+ };
+
+ pci@2,0 {
+ status = "okay";
+ };
+
+ pci@3,0 {
+ status = "okay";
+ };
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+ hdmi@54280000 {
+ status = "okay";
+ };
+ };
+
+ serial@70006000 {
+ status = "okay";
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pcie-switch@58 {
+ compatible = "plx,pex8605";
+ reg = <0x58>;
+ };
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t00";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /*
+ * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+ * carrier board)
+ */
+ cami2c: i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
+
+ /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+ hdmiddc: i2c@7000c700 {
+ status = "okay";
+ };
+
+ /* SPI1: Apalis SPI1 */
+ spi@7000d400 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ spidev0: spidev@1 {
+ compatible = "spidev";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+ };
+ };
+
+ /* SPI5: Apalis SPI2 */
+ spi@7000dc00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ spidev1: spidev@2 {
+ compatible = "spidev";
+ reg = <2>;
+ spi-max-frequency = <25000000>;
+ };
+ };
+
+ sd1: sdhci@78000000 {
+ status = "okay";
+ bus-width = <4>;
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ };
+
+ mmc1: sdhci@78000400 {
+ status = "okay";
+ bus-width = <8>;
+ /* MMC1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ };
+
+ /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+ usb@7d000000 {
+ status = "okay";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ vbus-supply = <&usbo1_vbus_reg>;
+ };
+
+ /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+ usb@7d004000 {
+ status = "okay";
+ };
+
+ usb-phy@7d004000 {
+ status = "okay";
+ vbus-supply = <&usbh_vbus_reg>;
+ };
+
+ /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ vbus-supply = <&usbh_vbus_reg>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ /* PWM0 */
+ pwms = <&pwm 0 5000000>;
+ brightness-levels = <255 231 223 207 191 159 127 0>;
+ default-brightness-level = <6>;
+ /* BKL1_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+
+ backlight = <&backlight>;
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ pwm3 {
+ label = "PWM3";
+ pwms = <&pwm 1 19600>;
+ max-brightness = <255>;
+ };
+ pwm2 {
+ label = "PWM2";
+ pwms = <&pwm 2 19600>;
+ max-brightness = <255>;
+ };
+ pwm1 {
+ label = "PWM1";
+ pwms = <&pwm 3 19600>;
+ max-brightness = <255>;
+ };
+ };
+
+ regulators {
+ sys_5v0_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ /* USBO1_EN */
+ usbo1_vbus_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usbo1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&sys_5v0_reg>;
+ };
+
+ /* USBH_EN */
+ usbh_vbus_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usbh_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&sys_5v0_reg>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
new file mode 100644
index 0000000..d04efcf
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -0,0 +1,673 @@
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Device Tree
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
+ */
+/ {
+ model = "Toradex Apalis T30";
+ compatible = "toradex,apalis_t30", "nvidia,tegra30";
+
+ pcie-controller@00003000 {
+ pex-clk-supply = <&sys_3v3_reg>;
+ vdd-supply = <&vdd2_reg>;
+ avdd-supply = <&ldo6_reg>;
+
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ };
+
+ pci@2,0 {
+ nvidia,num-lanes = <1>;
+ };
+
+ pci@3,0 {
+ nvidia,num-lanes = <1>;
+ };
+ };
+
+ host1x@50000000 {
+ hdmi@54280000 {
+ vdd-supply = <&sys_3v3_reg>;
+ pll-supply = <&vio_reg>;
+
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,ddc-i2c-bus = <&hdmiddc>;
+ };
+ };
+
+ pinmux@70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ /* Apalis BKL1_ON */
+ pv2 {
+ nvidia,pins = "pv2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis BKL1_PWM */
+ uart3_rts_n_pc0 {
+ nvidia,pins = "uart3_rts_n_pc0";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+ uart3_cts_n_pa1 {
+ nvidia,pins = "uart3_cts_n_pa1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis CAN1 on SPI6 */
+ spi2_cs0_n_px3 {
+ nvidia,pins = "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* CAN_INT1 */
+ spi2_cs1_n_pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis CAN2 on SPI4 */
+ gmi_a16_pj7 {
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* CAN_INT2 */
+ spi2_cs2_n_pw3 {
+ nvidia,pins = "spi2_cs2_n_pw3";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C3 */
+ cam_i2c_scl_pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis MMC1 */
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6",
+ "sdmmc3_cmd_pa7";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3_dat0_pb7 {
+ nvidia,pins = "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_dat4_pd1",
+ "sdmmc3_dat5_pd0",
+ "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis MMC1_CD# */
+ pv3 {
+ nvidia,pins = "pv3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis PWM1 */
+ gpio_pu6 {
+ nvidia,pins = "gpio_pu6";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM2 */
+ gpio_pu5 {
+ nvidia,pins = "gpio_pu5";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM3 */
+ gpio_pu4 {
+ nvidia,pins = "gpio_pu4";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM4 */
+ gpio_pu3 {
+ nvidia,pins = "gpio_pu3";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis RESET_MOCI# */
+ gmi_rst_n_pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SD1 */
+ sdmmc1_clk_pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc1_cmd_pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis SD1_CD# */
+ clk2_req_pcc5 {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPI1 */
+ spi1_sck_px5 {
+ nvidia,pins = "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_miso_px7",
+ "spi1_cs0_n_px6";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SPI2 */
+ lcd_sck_pz4 {
+ nvidia,pins = "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_sdin_pz2",
+ "lcd_cs0_n_pn4";
+ nvidia,function = "spi5";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART1 */
+ ulpi_data0 {
+ nvidia,pins = "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART2 */
+ ulpi_clk_py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART3 */
+ uart2_rxd_pc3 {
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_txd_pc2";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART4 */
+ uart3_rxd_pw7 {
+ nvidia,pins = "uart3_rxd_pw7",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBO1_EN */
+ gen2_i2c_scl_pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBO1_OC# */
+ gen2_i2c_sda_pt6 {
+ nvidia,pins = "gen2_i2c_sda_pt6";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis WAKE1_MICO */
+ pv1 {
+ nvidia,pins = "pv1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* eMMC (On-module) */
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* LVDS Transceiver Configuration */
+ pbb0 {
+ nvidia,pins = "pbb0",
+ "pbb7",
+ "pcc1",
+ "pcc2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3",
+ "pbb4",
+ "pbb5",
+ "pbb6";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Power I2C (On-module) */
+ pwr_i2c_scl_pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * THERMD_ALERT#, unlatched I2C address pin of LM95245
+ * temperature sensor therefore requires disabling for
+ * now
+ */
+ lcd_dc1_pd2 {
+ nvidia,pins = "lcd_dc1_pd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* TOUCH_PEN_INT# */
+ pv0 {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+
+ hdmiddc: i2c@7000c700 {
+ clock-frequency = <100000>;
+ };
+
+ /*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic: tps65911@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&sys_3v3_reg>;
+ vcc2-supply = <&sys_3v3_reg>;
+ vcc3-supply = <&vio_reg>;
+ vcc4-supply = <&sys_3v3_reg>;
+ vcc5-supply = <&sys_3v3_reg>;
+ vcc6-supply = <&vio_reg>;
+ vcc7-supply = <&sys_5v0_reg>;
+ vccio-supply = <&sys_3v3_reg>;
+
+ regulators {
+ /* SW1: +V1.35_VDDIO_DDR */
+ vdd1_reg: vdd1 {
+ regulator-name = "vddio_ddr_1v35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ /* SW2: +V1.05 */
+ vdd2_reg: vdd2 {
+ regulator-name =
+ "vdd_pexa,vdd_pexb,vdd_sata";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ /* SW CTRL: +V1.0_VDD_CPU */
+ vddctrl_reg: vddctrl {
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ };
+
+ /* SWIO: +V1.8 */
+ vio_reg: vio {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /* LDO1: unused */
+
+ /*
+ * EN_+V3.3 switching via FET:
+ * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+ * see also v3_3 fixed supply
+ */
+ ldo2_reg: ldo2 {
+ regulator-name = "en_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* +V1.2_CSI */
+ ldo3_reg: ldo3 {
+ regulator-name =
+ "avdd_dsi_csi,pwrdet_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ /* +V1.2_VDD_RTC */
+ ldo4_reg: ldo4 {
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V2.8_AVDD_VDAC:
+ * only required for analog RGB
+ */
+ ldo5_reg: ldo5 {
+ regulator-name = "avdd_vdac";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+ * but LDO6 can't set voltage in 50mV
+ * granularity
+ */
+ ldo6_reg: ldo6 {
+ regulator-name = "avdd_plle";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ /* +V1.2_AVDD_PLL */
+ ldo7_reg: ldo7 {
+ regulator-name = "avdd_pll";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /* +V1.0_VDD_DDR_HS */
+ ldo8_reg: ldo8 {
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ /* STMPE811 touch screen controller */
+ stmpe811@41 {
+ compatible = "st,stmpe811";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ reg = <0>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+ };
+
+ /*
+ * LM95245 temperature sensor
+ * Note: OVERT_N directly connected to PMIC PWRDN
+ */
+ temp-sensor@4c {
+ compatible = "national,lm95245";
+ reg = <0x4c>;
+ };
+
+ /* SW: +V1.2_VDD_CORE */
+ tps62362@60 {
+ compatible = "ti,tps62362";
+ reg = <0x60>;
+
+ regulator-name = "tps62362-vout";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-low;
+ /* VSEL1: EN_CORE_DVFS_N low for DVFS */
+ ti,vsel1-state-low;
+ };
+ };
+
+ /* SPI4: CAN2 */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can@1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ /* SPI6: CAN1 */
+ spi@7000de00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clk@0 {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ clk16m: clk@1 {
+ compatible = "fixed-clock";
+ reg=<1>;
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ clock-output-names = "clk16m";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_3v3_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 3/3] arm: tegra: initial support for apalis t30
@ 2014-06-09 22:52 ` Marcel Ziswiler
0 siblings, 0 replies; 14+ messages in thread
From: Marcel Ziswiler @ 2014-06-09 22:52 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds the device tree to support Toradex Apalis T30, a
computer on module which can be used on different carrier boards.
The module consists of a Tegra 3 SoC, two PMICs, 1 or 2 GB of DDR3L
RAM, eMMC, an LM95245 temperature sensor chip, an i210 resp. i211
gigabit Ethernet controller, an STMPE811 ADC/touch controller as well
as two MCP2515 CAN controllers. Furthermore, there is an SGTL5000 audio
codec which is not yet supported. Anything that is not self contained
on the module is disabled by default.
The device tree for the Evaluation Board includes the modules device
tree and enables the supported peripherals of the carrier board (the
Evaluation Board supports almost all of them).
While at it also add the device tree binding documentation for Apalis
T30.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
Changes since v1:
- Drop binding documentation not related to Apalis support.
- Add blank lines between nodes.
- Put status properties first.
- Drop unused sdhci labels.
- Drop blank lines between related properties.
- Sort PWM nodes alphanumerically.
- Start regulator numbering at 0.
- Drop spidev nodes considered evil.
Documentation/devicetree/bindings/arm/tegra.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/tegra30-apalis-eval.dts | 258 +++++++++
arch/arm/boot/dts/tegra30-apalis.dtsi | 673 +++++++++++++++++++++++
4 files changed, 934 insertions(+)
create mode 100644 arch/arm/boot/dts/tegra30-apalis-eval.dts
create mode 100644 arch/arm/boot/dts/tegra30-apalis.dtsi
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt
index 558ed4b..73278c6 100644
--- a/Documentation/devicetree/bindings/arm/tegra.txt
+++ b/Documentation/devicetree/bindings/arm/tegra.txt
@@ -30,6 +30,8 @@ board-specific compatible values:
nvidia,seaboard
nvidia,ventana
nvidia,whistler
+ toradex,apalis_t30
+ toradex,apalis_t30-eval
toradex,colibri_t20-512
toradex,iris
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c1a257a..333ac53 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -364,6 +364,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-whistler.dtb \
+ tegra30-apalis-eval.dtb \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
new file mode 100644
index 0000000..347cc60
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -0,0 +1,258 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis.dtsi"
+
+/ {
+ model = "Toradex Apalis T30 on Apalis Evaluation Board";
+ compatible = "toradex,apalis_t30-eval", "nvidia,tegra30";
+
+ aliases {
+ rtc0 = "/i2c at 7000c000/rtc at 68";
+ rtc1 = "/i2c at 7000d000/tps65911 at 2d";
+ rtc2 = "/rtc at 7000e000";
+ };
+
+ pcie-controller at 00003000 {
+ status = "okay";
+
+ pci at 1,0 {
+ status = "okay";
+ };
+
+ pci at 2,0 {
+ status = "okay";
+ };
+
+ pci at 3,0 {
+ status = "okay";
+ };
+ };
+
+ host1x at 50000000 {
+ dc at 54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+ hdmi at 54280000 {
+ status = "okay";
+ };
+ };
+
+ serial at 70006000 {
+ status = "okay";
+ };
+
+ serial at 70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ serial at 70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ serial at 70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ pwm at 7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+ * board)
+ */
+ i2c at 7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pcie-switch at 58 {
+ compatible = "plx,pex8605";
+ reg = <0x58>;
+ };
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc at 68 {
+ compatible = "st,m41t00";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /*
+ * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+ * carrier board)
+ */
+ cami2c: i2c at 7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
+
+ /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+ hdmiddc: i2c at 7000c700 {
+ status = "okay";
+ };
+
+ /* SPI1: Apalis SPI1 */
+ spi at 7000d400 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ spidev0: spidev at 1 {
+ compatible = "spidev";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+ };
+ };
+
+ /* SPI5: Apalis SPI2 */
+ spi at 7000dc00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ spidev1: spidev at 2 {
+ compatible = "spidev";
+ reg = <2>;
+ spi-max-frequency = <25000000>;
+ };
+ };
+
+ sd1: sdhci at 78000000 {
+ status = "okay";
+ bus-width = <4>;
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ };
+
+ mmc1: sdhci at 78000400 {
+ status = "okay";
+ bus-width = <8>;
+ /* MMC1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ };
+
+ /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+ usb at 7d000000 {
+ status = "okay";
+ };
+
+ usb-phy at 7d000000 {
+ status = "okay";
+ vbus-supply = <&usbo1_vbus_reg>;
+ };
+
+ /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+ usb at 7d004000 {
+ status = "okay";
+ };
+
+ usb-phy at 7d004000 {
+ status = "okay";
+ vbus-supply = <&usbh_vbus_reg>;
+ };
+
+ /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+ usb at 7d008000 {
+ status = "okay";
+ };
+
+ usb-phy at 7d008000 {
+ status = "okay";
+ vbus-supply = <&usbh_vbus_reg>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ /* PWM0 */
+ pwms = <&pwm 0 5000000>;
+ brightness-levels = <255 231 223 207 191 159 127 0>;
+ default-brightness-level = <6>;
+ /* BKL1_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+
+ backlight = <&backlight>;
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ pwm3 {
+ label = "PWM3";
+ pwms = <&pwm 1 19600>;
+ max-brightness = <255>;
+ };
+ pwm2 {
+ label = "PWM2";
+ pwms = <&pwm 2 19600>;
+ max-brightness = <255>;
+ };
+ pwm1 {
+ label = "PWM1";
+ pwms = <&pwm 3 19600>;
+ max-brightness = <255>;
+ };
+ };
+
+ regulators {
+ sys_5v0_reg: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ /* USBO1_EN */
+ usbo1_vbus_reg: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usbo1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&sys_5v0_reg>;
+ };
+
+ /* USBH_EN */
+ usbh_vbus_reg: regulator at 3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usbh_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&sys_5v0_reg>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
new file mode 100644
index 0000000..d04efcf
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -0,0 +1,673 @@
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Device Tree
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
+ */
+/ {
+ model = "Toradex Apalis T30";
+ compatible = "toradex,apalis_t30", "nvidia,tegra30";
+
+ pcie-controller at 00003000 {
+ pex-clk-supply = <&sys_3v3_reg>;
+ vdd-supply = <&vdd2_reg>;
+ avdd-supply = <&ldo6_reg>;
+
+ pci at 1,0 {
+ nvidia,num-lanes = <4>;
+ };
+
+ pci at 2,0 {
+ nvidia,num-lanes = <1>;
+ };
+
+ pci at 3,0 {
+ nvidia,num-lanes = <1>;
+ };
+ };
+
+ host1x at 50000000 {
+ hdmi at 54280000 {
+ vdd-supply = <&sys_3v3_reg>;
+ pll-supply = <&vio_reg>;
+
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,ddc-i2c-bus = <&hdmiddc>;
+ };
+ };
+
+ pinmux at 70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ /* Apalis BKL1_ON */
+ pv2 {
+ nvidia,pins = "pv2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis BKL1_PWM */
+ uart3_rts_n_pc0 {
+ nvidia,pins = "uart3_rts_n_pc0";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+ uart3_cts_n_pa1 {
+ nvidia,pins = "uart3_cts_n_pa1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis CAN1 on SPI6 */
+ spi2_cs0_n_px3 {
+ nvidia,pins = "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* CAN_INT1 */
+ spi2_cs1_n_pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis CAN2 on SPI4 */
+ gmi_a16_pj7 {
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* CAN_INT2 */
+ spi2_cs2_n_pw3 {
+ nvidia,pins = "spi2_cs2_n_pw3";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C3 */
+ cam_i2c_scl_pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis MMC1 */
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6",
+ "sdmmc3_cmd_pa7";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3_dat0_pb7 {
+ nvidia,pins = "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_dat4_pd1",
+ "sdmmc3_dat5_pd0",
+ "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis MMC1_CD# */
+ pv3 {
+ nvidia,pins = "pv3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis PWM1 */
+ gpio_pu6 {
+ nvidia,pins = "gpio_pu6";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM2 */
+ gpio_pu5 {
+ nvidia,pins = "gpio_pu5";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM3 */
+ gpio_pu4 {
+ nvidia,pins = "gpio_pu4";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM4 */
+ gpio_pu3 {
+ nvidia,pins = "gpio_pu3";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis RESET_MOCI# */
+ gmi_rst_n_pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SD1 */
+ sdmmc1_clk_pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc1_cmd_pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis SD1_CD# */
+ clk2_req_pcc5 {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPI1 */
+ spi1_sck_px5 {
+ nvidia,pins = "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_miso_px7",
+ "spi1_cs0_n_px6";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SPI2 */
+ lcd_sck_pz4 {
+ nvidia,pins = "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_sdin_pz2",
+ "lcd_cs0_n_pn4";
+ nvidia,function = "spi5";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART1 */
+ ulpi_data0 {
+ nvidia,pins = "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART2 */
+ ulpi_clk_py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART3 */
+ uart2_rxd_pc3 {
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_txd_pc2";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART4 */
+ uart3_rxd_pw7 {
+ nvidia,pins = "uart3_rxd_pw7",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBO1_EN */
+ gen2_i2c_scl_pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBO1_OC# */
+ gen2_i2c_sda_pt6 {
+ nvidia,pins = "gen2_i2c_sda_pt6";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis WAKE1_MICO */
+ pv1 {
+ nvidia,pins = "pv1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* eMMC (On-module) */
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* LVDS Transceiver Configuration */
+ pbb0 {
+ nvidia,pins = "pbb0",
+ "pbb7",
+ "pcc1",
+ "pcc2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3",
+ "pbb4",
+ "pbb5",
+ "pbb6";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Power I2C (On-module) */
+ pwr_i2c_scl_pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * THERMD_ALERT#, unlatched I2C address pin of LM95245
+ * temperature sensor therefore requires disabling for
+ * now
+ */
+ lcd_dc1_pd2 {
+ nvidia,pins = "lcd_dc1_pd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* TOUCH_PEN_INT# */
+ pv0 {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+
+ hdmiddc: i2c at 7000c700 {
+ clock-frequency = <100000>;
+ };
+
+ /*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+ i2c at 7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic: tps65911 at 2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&sys_3v3_reg>;
+ vcc2-supply = <&sys_3v3_reg>;
+ vcc3-supply = <&vio_reg>;
+ vcc4-supply = <&sys_3v3_reg>;
+ vcc5-supply = <&sys_3v3_reg>;
+ vcc6-supply = <&vio_reg>;
+ vcc7-supply = <&sys_5v0_reg>;
+ vccio-supply = <&sys_3v3_reg>;
+
+ regulators {
+ /* SW1: +V1.35_VDDIO_DDR */
+ vdd1_reg: vdd1 {
+ regulator-name = "vddio_ddr_1v35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ /* SW2: +V1.05 */
+ vdd2_reg: vdd2 {
+ regulator-name =
+ "vdd_pexa,vdd_pexb,vdd_sata";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ /* SW CTRL: +V1.0_VDD_CPU */
+ vddctrl_reg: vddctrl {
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ };
+
+ /* SWIO: +V1.8 */
+ vio_reg: vio {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /* LDO1: unused */
+
+ /*
+ * EN_+V3.3 switching via FET:
+ * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+ * see also v3_3 fixed supply
+ */
+ ldo2_reg: ldo2 {
+ regulator-name = "en_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* +V1.2_CSI */
+ ldo3_reg: ldo3 {
+ regulator-name =
+ "avdd_dsi_csi,pwrdet_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ /* +V1.2_VDD_RTC */
+ ldo4_reg: ldo4 {
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V2.8_AVDD_VDAC:
+ * only required for analog RGB
+ */
+ ldo5_reg: ldo5 {
+ regulator-name = "avdd_vdac";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+ * but LDO6 can't set voltage in 50mV
+ * granularity
+ */
+ ldo6_reg: ldo6 {
+ regulator-name = "avdd_plle";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ /* +V1.2_AVDD_PLL */
+ ldo7_reg: ldo7 {
+ regulator-name = "avdd_pll";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /* +V1.0_VDD_DDR_HS */
+ ldo8_reg: ldo8 {
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ /* STMPE811 touch screen controller */
+ stmpe811 at 41 {
+ compatible = "st,stmpe811";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ reg = <0>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+ };
+
+ /*
+ * LM95245 temperature sensor
+ * Note: OVERT_N directly connected to PMIC PWRDN
+ */
+ temp-sensor at 4c {
+ compatible = "national,lm95245";
+ reg = <0x4c>;
+ };
+
+ /* SW: +V1.2_VDD_CORE */
+ tps62362 at 60 {
+ compatible = "ti,tps62362";
+ reg = <0x60>;
+
+ regulator-name = "tps62362-vout";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-low;
+ /* VSEL1: EN_CORE_DVFS_N low for DVFS */
+ ti,vsel1-state-low;
+ };
+ };
+
+ /* SPI4: CAN2 */
+ spi at 7000da00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can at 1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ /* SPI6: CAN1 */
+ spi at 7000de00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can at 0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ pmc at 7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ sdhci at 78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clk at 0 {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ clk16m: clk at 1 {
+ compatible = "fixed-clock";
+ reg=<1>;
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ clock-output-names = "clk16m";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_3v3_reg: regulator at 100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v2 3/3] arm: tegra: initial support for apalis t30
2014-06-09 22:52 ` Marcel Ziswiler
(?)
@ 2014-06-12 19:45 ` Stephen Warren
-1 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2014-06-12 19:45 UTC (permalink / raw)
To: Marcel Ziswiler, thierry.reding-Re5JQEeQqe8AvxtiuMwx3w
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, stefan-XLVq0VzYD2Y
On 06/09/2014 04:52 PM, Marcel Ziswiler wrote:
> This patch adds the device tree to support Toradex Apalis T30, a
> computer on module which can be used on different carrier boards.
This looks OK; I'll apply once the merge window is done.
> diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
> + pwmleds {
...
> + pwm3 {
> + pwm2 {
> + pwm1 {
Those still aren't sorted. I'll try and remember to fix that when I
apply it.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 3/3] arm: tegra: initial support for apalis t30
@ 2014-06-12 19:45 ` Stephen Warren
0 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2014-06-12 19:45 UTC (permalink / raw)
To: Marcel Ziswiler, thierry.reding
Cc: linux, devicetree, linux-arm-kernel, linux-kernel, linux-tegra, stefan
On 06/09/2014 04:52 PM, Marcel Ziswiler wrote:
> This patch adds the device tree to support Toradex Apalis T30, a
> computer on module which can be used on different carrier boards.
This looks OK; I'll apply once the merge window is done.
> diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
> + pwmleds {
...
> + pwm3 {
> + pwm2 {
> + pwm1 {
Those still aren't sorted. I'll try and remember to fix that when I
apply it.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 3/3] arm: tegra: initial support for apalis t30
@ 2014-06-12 19:45 ` Stephen Warren
0 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2014-06-12 19:45 UTC (permalink / raw)
To: linux-arm-kernel
On 06/09/2014 04:52 PM, Marcel Ziswiler wrote:
> This patch adds the device tree to support Toradex Apalis T30, a
> computer on module which can be used on different carrier boards.
This looks OK; I'll apply once the merge window is done.
> diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
> + pwmleds {
...
> + pwm3 {
> + pwm2 {
> + pwm1 {
Those still aren't sorted. I'll try and remember to fix that when I
apply it.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds
2014-06-09 22:52 ` Marcel Ziswiler
(?)
@ 2014-06-16 18:57 ` Stephen Warren
-1 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2014-06-16 18:57 UTC (permalink / raw)
To: Marcel Ziswiler, thierry.reding-Re5JQEeQqe8AvxtiuMwx3w
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, stefan-XLVq0VzYD2Y
On 06/09/2014 04:52 PM, Marcel Ziswiler wrote:
> The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
> i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
> buses and PWM LEDs generically accessible from user space and an
> LM95245 temperature sensor chip. The later four can also be found on
> the Colibri T30 module.
I've applied this patch to Tegra's for-3.17/defconfig branch.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds
@ 2014-06-16 18:57 ` Stephen Warren
0 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2014-06-16 18:57 UTC (permalink / raw)
To: Marcel Ziswiler, thierry.reding
Cc: linux, devicetree, linux-arm-kernel, linux-kernel, linux-tegra, stefan
On 06/09/2014 04:52 PM, Marcel Ziswiler wrote:
> The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
> i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
> buses and PWM LEDs generically accessible from user space and an
> LM95245 temperature sensor chip. The later four can also be found on
> the Colibri T30 module.
I've applied this patch to Tegra's for-3.17/defconfig branch.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds
@ 2014-06-16 18:57 ` Stephen Warren
0 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2014-06-16 18:57 UTC (permalink / raw)
To: linux-arm-kernel
On 06/09/2014 04:52 PM, Marcel Ziswiler wrote:
> The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp.
> i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
> buses and PWM LEDs generically accessible from user space and an
> LM95245 temperature sensor chip. The later four can also be found on
> the Colibri T30 module.
I've applied this patch to Tegra's for-3.17/defconfig branch.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 3/3] arm: tegra: initial support for apalis t30
2014-06-09 22:52 ` Marcel Ziswiler
(?)
@ 2014-06-16 19:14 ` Stephen Warren
-1 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2014-06-16 19:14 UTC (permalink / raw)
To: Marcel Ziswiler, thierry.reding-Re5JQEeQqe8AvxtiuMwx3w
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, stefan-XLVq0VzYD2Y
On 06/09/2014 04:52 PM, Marcel Ziswiler wrote:
> This patch adds the device tree to support Toradex Apalis T30, a
> computer on module which can be used on different carrier boards.
>
> The module consists of a Tegra 3 SoC, two PMICs, 1 or 2 GB of DDR3L
> RAM, eMMC, an LM95245 temperature sensor chip, an i210 resp. i211
> gigabit Ethernet controller, an STMPE811 ADC/touch controller as well
> as two MCP2515 CAN controllers. Furthermore, there is an SGTL5000 audio
> codec which is not yet supported. Anything that is not self contained
> on the module is disabled by default.
>
> The device tree for the Evaluation Board includes the modules device
> tree and enables the supported peripherals of the carrier board (the
> Evaluation Board supports almost all of them).
>
> While at it also add the device tree binding documentation for Apalis
> T30.
Applied to Tegra's for-3.17/dt branch.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 3/3] arm: tegra: initial support for apalis t30
@ 2014-06-16 19:14 ` Stephen Warren
0 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2014-06-16 19:14 UTC (permalink / raw)
To: Marcel Ziswiler, thierry.reding
Cc: linux, devicetree, linux-arm-kernel, linux-kernel, linux-tegra, stefan
On 06/09/2014 04:52 PM, Marcel Ziswiler wrote:
> This patch adds the device tree to support Toradex Apalis T30, a
> computer on module which can be used on different carrier boards.
>
> The module consists of a Tegra 3 SoC, two PMICs, 1 or 2 GB of DDR3L
> RAM, eMMC, an LM95245 temperature sensor chip, an i210 resp. i211
> gigabit Ethernet controller, an STMPE811 ADC/touch controller as well
> as two MCP2515 CAN controllers. Furthermore, there is an SGTL5000 audio
> codec which is not yet supported. Anything that is not self contained
> on the module is disabled by default.
>
> The device tree for the Evaluation Board includes the modules device
> tree and enables the supported peripherals of the carrier board (the
> Evaluation Board supports almost all of them).
>
> While at it also add the device tree binding documentation for Apalis
> T30.
Applied to Tegra's for-3.17/dt branch.
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 3/3] arm: tegra: initial support for apalis t30
@ 2014-06-16 19:14 ` Stephen Warren
0 siblings, 0 replies; 14+ messages in thread
From: Stephen Warren @ 2014-06-16 19:14 UTC (permalink / raw)
To: linux-arm-kernel
On 06/09/2014 04:52 PM, Marcel Ziswiler wrote:
> This patch adds the device tree to support Toradex Apalis T30, a
> computer on module which can be used on different carrier boards.
>
> The module consists of a Tegra 3 SoC, two PMICs, 1 or 2 GB of DDR3L
> RAM, eMMC, an LM95245 temperature sensor chip, an i210 resp. i211
> gigabit Ethernet controller, an STMPE811 ADC/touch controller as well
> as two MCP2515 CAN controllers. Furthermore, there is an SGTL5000 audio
> codec which is not yet supported. Anything that is not self contained
> on the module is disabled by default.
>
> The device tree for the Evaluation Board includes the modules device
> tree and enables the supported peripherals of the carrier board (the
> Evaluation Board supports almost all of them).
>
> While at it also add the device tree binding documentation for Apalis
> T30.
Applied to Tegra's for-3.17/dt branch.
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2014-06-16 19:14 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-06-09 22:52 [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds Marcel Ziswiler
2014-06-09 22:52 ` Marcel Ziswiler
2014-06-09 22:52 ` Marcel Ziswiler
2014-06-09 22:52 ` [PATCH v2 3/3] arm: tegra: initial support for apalis t30 Marcel Ziswiler
2014-06-09 22:52 ` Marcel Ziswiler
[not found] ` <95c131deb3e410e8defc9fe125dc662bdb276310.1402353627.git.marcel-mitwqZ+T+m9Wk0Htik3J/w@public.gmane.org>
2014-06-12 19:45 ` Stephen Warren
2014-06-12 19:45 ` Stephen Warren
2014-06-12 19:45 ` Stephen Warren
2014-06-16 19:14 ` Stephen Warren
2014-06-16 19:14 ` Stephen Warren
2014-06-16 19:14 ` Stephen Warren
[not found] ` <dadd07f9ed693d6bcf541764b62a2caf4cc38630.1402353627.git.marcel-mitwqZ+T+m9Wk0Htik3J/w@public.gmane.org>
2014-06-16 18:57 ` [PATCH v2 2/3] arm: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds Stephen Warren
2014-06-16 18:57 ` Stephen Warren
2014-06-16 18:57 ` Stephen Warren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.