* [BUG][NOUVEAU] G70 broken since 5.10-rc1
@ 2020-11-25 22:16 Mark Hounschell
[not found] ` <db0e5f78-8271-24b5-62f6-5473f69ac8d6-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Mark Hounschell @ 2020-11-25 22:16 UTC (permalink / raw)
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
Cc: Christian König, Mark Hounschell
I'm running an older "NVIDIA Corporation G70 [GeForce 7800 GT] (rev a1)"
card in a newer BIOSTAR B550GTA MB. Kernel 5.10-rcx does not work. I get
no virtual consoles or X screen.
My dmesg seems to show the cause:
[ 5.825702] fb0: switching to nouveaufb from VESA VGA
[ 6.242991] nouveau 0000:14:00.0: vgaarb: deactivate vga console
[ 6.243066] nouveau 0000:14:00.0: NVIDIA G70 (047200a1)
[ 6.443671] nouveau 0000:14:00.0: bios: version 05.70.02.13.7b
[ 6.443948] nouveau 0000:14:00.0: fb: 256 MiB GDDR3
[ 6.498039] nouveau 0000:14:00.0: DRM: VRAM: 250 MiB
[ 6.498041] nouveau 0000:14:00.0: DRM: GART: 512 MiB
[ 6.498044] nouveau 0000:14:00.0: DRM: TMDS table version 1.1
[ 6.498046] nouveau 0000:14:00.0: DRM: DCB version 3.0
[ 6.498049] nouveau 0000:14:00.0: DRM: DCB outp 00: 01000300 00000028
[ 6.498051] nouveau 0000:14:00.0: DRM: DCB outp 01: 03000302 00000000
[ 6.498053] nouveau 0000:14:00.0: DRM: DCB outp 02: 04011310 00000028
[ 6.498055] nouveau 0000:14:00.0: DRM: DCB outp 03: 04011312 00000000
[ 6.498057] nouveau 0000:14:00.0: DRM: DCB outp 04: 020223f1 0040c080
[ 6.498060] nouveau 0000:14:00.0: DRM: DCB conn 00: 1030
[ 6.498062] nouveau 0000:14:00.0: DRM: DCB conn 01: 2130
[ 6.498064] nouveau 0000:14:00.0: DRM: DCB conn 02: 0210
[ 6.498065] nouveau 0000:14:00.0: DRM: DCB conn 03: 0211
[ 6.498067] nouveau 0000:14:00.0: DRM: DCB conn 04: 0213
[ 6.502949] nouveau 0000:14:00.0: DRM: Setting dpms mode 3 on TV
encoder (output 4)
[ 6.585845] nouveau 0000:14:00.0: DRM: failed to map fb: -28
[ 6.585949] [drm] Initialized nouveau 1.3.1 20120801 for 0000:14:00.0
on minor 0
This commit caused the BUG
141b15e59175aa174ca1f7596188bd15a7ca17ba is the first bad commit
commit 141b15e59175aa174ca1f7596188bd15a7ca17ba
Author: Christian König <christian.koenig@amd.com>
Date: Fri Aug 21 16:06:50 2020 +0200
drm/nouveau: move io_reserve_lru handling into the driver v5
While working on TTM cleanups I've found that the io_reserve_lru
used by
Nouveau is actually not working at all.
In general we should remove driver specific handling from the memory
management, so this patch moves the io_reserve_lru handling into
Nouveau
instead.
v2: don't call ttm_bo_unmap_virtual in nouveau_ttm_io_mem_reserve
v3: rebased and use both base and offset in the check
v4: fix small typos and test the patch
v5: rebased and keep the mem.bus init in TTM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/388643/
drivers/gpu/drm/nouveau/nouveau_bo.c | 101
+++++++++++++++++++++++++++-------
drivers/gpu/drm/nouveau/nouveau_bo.h | 3 +
drivers/gpu/drm/nouveau/nouveau_drv.h | 2 +
drivers/gpu/drm/nouveau/nouveau_ttm.c | 44 ++++++++++++++-
4 files changed, 127 insertions(+), 23 deletions(-)
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG][NOUVEAU] G70 broken since 5.10-rc1
[not found] ` <db0e5f78-8271-24b5-62f6-5473f69ac8d6-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2020-11-26 8:35 ` Christian König
[not found] ` <c2ee46af-79a8-9a07-b12d-b755017ee500-5C7GfCeVMHo@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Christian König @ 2020-11-26 8:35 UTC (permalink / raw)
To: markh-n2QNKt385d+sTnJN9+BGXg, nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
Cc: Mark Hounschell
Hi do you have a full dmesg? This is a bit short.
Going to take a look later today.
Thanks,
Christian.
Am 25.11.20 um 23:16 schrieb Mark Hounschell:
>
> I'm running an older "NVIDIA Corporation G70 [GeForce 7800 GT] (rev
> a1)" card in a newer BIOSTAR B550GTA MB. Kernel 5.10-rcx does not
> work. I get no virtual consoles or X screen.
>
>
> My dmesg seems to show the cause:
>
> [ 5.825702] fb0: switching to nouveaufb from VESA VGA
> [ 6.242991] nouveau 0000:14:00.0: vgaarb: deactivate vga console
> [ 6.243066] nouveau 0000:14:00.0: NVIDIA G70 (047200a1)
> [ 6.443671] nouveau 0000:14:00.0: bios: version 05.70.02.13.7b
> [ 6.443948] nouveau 0000:14:00.0: fb: 256 MiB GDDR3
> [ 6.498039] nouveau 0000:14:00.0: DRM: VRAM: 250 MiB
> [ 6.498041] nouveau 0000:14:00.0: DRM: GART: 512 MiB
> [ 6.498044] nouveau 0000:14:00.0: DRM: TMDS table version 1.1
> [ 6.498046] nouveau 0000:14:00.0: DRM: DCB version 3.0
> [ 6.498049] nouveau 0000:14:00.0: DRM: DCB outp 00: 01000300 00000028
> [ 6.498051] nouveau 0000:14:00.0: DRM: DCB outp 01: 03000302 00000000
> [ 6.498053] nouveau 0000:14:00.0: DRM: DCB outp 02: 04011310 00000028
> [ 6.498055] nouveau 0000:14:00.0: DRM: DCB outp 03: 04011312 00000000
> [ 6.498057] nouveau 0000:14:00.0: DRM: DCB outp 04: 020223f1 0040c080
> [ 6.498060] nouveau 0000:14:00.0: DRM: DCB conn 00: 1030
> [ 6.498062] nouveau 0000:14:00.0: DRM: DCB conn 01: 2130
> [ 6.498064] nouveau 0000:14:00.0: DRM: DCB conn 02: 0210
> [ 6.498065] nouveau 0000:14:00.0: DRM: DCB conn 03: 0211
> [ 6.498067] nouveau 0000:14:00.0: DRM: DCB conn 04: 0213
> [ 6.502949] nouveau 0000:14:00.0: DRM: Setting dpms mode 3 on TV
> encoder (output 4)
> [ 6.585845] nouveau 0000:14:00.0: DRM: failed to map fb: -28
> [ 6.585949] [drm] Initialized nouveau 1.3.1 20120801 for
> 0000:14:00.0 on minor 0
>
> This commit caused the BUG
>
> 141b15e59175aa174ca1f7596188bd15a7ca17ba is the first bad commit
> commit 141b15e59175aa174ca1f7596188bd15a7ca17ba
> Author: Christian König <christian.koenig@amd.com>
> Date: Fri Aug 21 16:06:50 2020 +0200
>
> drm/nouveau: move io_reserve_lru handling into the driver v5
>
> While working on TTM cleanups I've found that the io_reserve_lru
> used by
> Nouveau is actually not working at all.
>
> In general we should remove driver specific handling from the memory
> management, so this patch moves the io_reserve_lru handling into
> Nouveau
> instead.
>
> v2: don't call ttm_bo_unmap_virtual in nouveau_ttm_io_mem_reserve
> v3: rebased and use both base and offset in the check
> v4: fix small typos and test the patch
> v5: rebased and keep the mem.bus init in TTM.
>
> Signed-off-by: Christian König <christian.koenig@amd.com>
> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
> Link:
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.freedesktop.org%2Fpatch%2F388643%2F&data=04%7C01%7Cchristian.koenig%40amd.com%7C03438c404c6144472f9b08d8918fb87e%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637419393771591426%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=bsapJBDZ9FyWSH%2Fos1jxXcmxgJy%2FmF%2FiFNzWQ3X1wAs%3D&reserved=0
>
> drivers/gpu/drm/nouveau/nouveau_bo.c | 101
> +++++++++++++++++++++++++++-------
> drivers/gpu/drm/nouveau/nouveau_bo.h | 3 +
> drivers/gpu/drm/nouveau/nouveau_drv.h | 2 +
> drivers/gpu/drm/nouveau/nouveau_ttm.c | 44 ++++++++++++++-
> 4 files changed, 127 insertions(+), 23 deletions(-)
>
>
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG][NOUVEAU] G70 broken since 5.10-rc1
[not found] ` <c2ee46af-79a8-9a07-b12d-b755017ee500-5C7GfCeVMHo@public.gmane.org>
@ 2020-11-26 9:59 ` Mark Hounschell
[not found] ` <aa4e3741-b1b2-4ae2-6b35-880b40c985c8-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Mark Hounschell @ 2020-11-26 9:59 UTC (permalink / raw)
To: Christian König, nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
Cc: Mark Hounschell
On 11/26/20 3:35 AM, Christian König wrote:
> Hi do you have a full dmesg? This is a bit short.
>
> Going to take a look later today.
>
> Thanks,
> Christian.
>
> Am 25.11.20 um 23:16 schrieb Mark Hounschell:
>>
>> I'm running an older "NVIDIA Corporation G70 [GeForce 7800 GT] (rev
>> a1)" card in a newer BIOSTAR B550GTA MB. Kernel 5.10-rcx does not
>> work. I get no virtual consoles or X screen.
>>
>>
>> My dmesg seems to show the cause:
>>
>> [ 5.825702] fb0: switching to nouveaufb from VESA VGA
>> [ 6.242991] nouveau 0000:14:00.0: vgaarb: deactivate vga console
>> [ 6.243066] nouveau 0000:14:00.0: NVIDIA G70 (047200a1)
>> [ 6.443671] nouveau 0000:14:00.0: bios: version 05.70.02.13.7b
>> [ 6.443948] nouveau 0000:14:00.0: fb: 256 MiB GDDR3
>> [ 6.498039] nouveau 0000:14:00.0: DRM: VRAM: 250 MiB
>> [ 6.498041] nouveau 0000:14:00.0: DRM: GART: 512 MiB
>> [ 6.498044] nouveau 0000:14:00.0: DRM: TMDS table version 1.1
>> [ 6.498046] nouveau 0000:14:00.0: DRM: DCB version 3.0
>> [ 6.498049] nouveau 0000:14:00.0: DRM: DCB outp 00: 01000300 00000028
>> [ 6.498051] nouveau 0000:14:00.0: DRM: DCB outp 01: 03000302 00000000
>> [ 6.498053] nouveau 0000:14:00.0: DRM: DCB outp 02: 04011310 00000028
>> [ 6.498055] nouveau 0000:14:00.0: DRM: DCB outp 03: 04011312 00000000
>> [ 6.498057] nouveau 0000:14:00.0: DRM: DCB outp 04: 020223f1 0040c080
>> [ 6.498060] nouveau 0000:14:00.0: DRM: DCB conn 00: 1030
>> [ 6.498062] nouveau 0000:14:00.0: DRM: DCB conn 01: 2130
>> [ 6.498064] nouveau 0000:14:00.0: DRM: DCB conn 02: 0210
>> [ 6.498065] nouveau 0000:14:00.0: DRM: DCB conn 03: 0211
>> [ 6.498067] nouveau 0000:14:00.0: DRM: DCB conn 04: 0213
>> [ 6.502949] nouveau 0000:14:00.0: DRM: Setting dpms mode 3 on TV
>> encoder (output 4)
>> [ 6.585845] nouveau 0000:14:00.0: DRM: failed to map fb: -28
>> [ 6.585949] [drm] Initialized nouveau 1.3.1 20120801 for
>> 0000:14:00.0 on minor 0
>>
>> This commit caused the BUG
>>
>> 141b15e59175aa174ca1f7596188bd15a7ca17ba is the first bad commit
>> commit 141b15e59175aa174ca1f7596188bd15a7ca17ba
>> Author: Christian König <christian.koenig@amd.com>
>> Date: Fri Aug 21 16:06:50 2020 +0200
>>
>> drm/nouveau: move io_reserve_lru handling into the driver v5
>>
>> While working on TTM cleanups I've found that the io_reserve_lru
>> used by
>> Nouveau is actually not working at all.
>>
>> In general we should remove driver specific handling from the memory
>> management, so this patch moves the io_reserve_lru handling into
>> Nouveau
>> instead.
>>
>> v2: don't call ttm_bo_unmap_virtual in nouveau_ttm_io_mem_reserve
>> v3: rebased and use both base and offset in the check
>> v4: fix small typos and test the patch
>> v5: rebased and keep the mem.bus init in TTM.
>>
>> Signed-off-by: Christian König <christian.koenig@amd.com>
>> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
>> Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
>> Link:
>> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.freedesktop.org%2Fpatch%2F388643%2F&data=04%7C01%7Cchristian.koenig%40amd.com%7C03438c404c6144472f9b08d8918fb87e%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637419393771591426%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=bsapJBDZ9FyWSH%2Fos1jxXcmxgJy%2FmF%2FiFNzWQ3X1wAs%3D&reserved=0
>>
>>
>> drivers/gpu/drm/nouveau/nouveau_bo.c | 101
>> +++++++++++++++++++++++++++-------
>> drivers/gpu/drm/nouveau/nouveau_bo.h | 3 +
>> drivers/gpu/drm/nouveau/nouveau_drv.h | 2 +
>> drivers/gpu/drm/nouveau/nouveau_ttm.c | 44 ++++++++++++++-
>> 4 files changed, 127 insertions(+), 23 deletions(-)
>>
>>
>
markh@harley:~> dmesg
[ 0.000000] Linux version 5.9.0-rc1+ (root@harley) (gcc (SUSE Linux)
7.5.0, GNU ld (GNU Binutils; openSUSE Leap 15.2)
2.35.0.20200915-lp152.4.3) #9 SMP PREEMPT Wed Nov 25 15:31:57 EST 2020
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.9.0-rc1+
root=/dev/disk/by-label/LEAP-15.2 video=1600x1200 noresume showopts
apm=off splash=verbose audit=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832
bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a210000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000ac89dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ac89e000-0x00000000acbf2fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000acbf3000-0x00000000acc24fff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000acc25000-0x00000000ad2a0fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ad2a1000-0x00000000addfefff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000addff000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af000000-0x00000000afffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044f37ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000044f380000-0x000000044fffffff]
reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: BIOSTAR Group B550GTA/B550GTA, BIOS 5.17 07/06/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3892.822 MHz processor
[ 0.000512] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000513] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000518] last_pfn = 0x44f380 max_arch_pfn = 0x400000000
[ 0.000521] MTRR default type: uncachable
[ 0.000522] MTRR fixed ranges enabled:
[ 0.000523] 00000-9FFFF write-back
[ 0.000523] A0000-BFFFF write-through
[ 0.000524] C0000-FFFFF write-protect
[ 0.000524] MTRR variable ranges enabled:
[ 0.000525] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000526] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000526] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000527] 3 base 0000AD540000 mask FFFFFFFF0000 uncachable
[ 0.000527] 4 disabled
[ 0.000527] 5 disabled
[ 0.000527] 6 disabled
[ 0.000528] 7 disabled
[ 0.000528] TOM2: 0000000450000000 aka 17664M
[ 0.001356] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC-
WT
[ 0.001581] e820: update [mem 0xad540000-0xad54ffff] usable ==> reserved
[ 0.001583] e820: update [mem 0xb0000000-0xffffffff] usable ==> reserved
[ 0.001586] last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[ 0.005043] Using GB pages for direct mapping
[ 0.005708] RAMDISK: [mem 0x3685f000-0x37426fff]
[ 0.005715] ACPI: Early table checksum verification disabled
[ 0.005718] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.005721] ACPI: XSDT 0x00000000AD289728 0000AC (v01 ALASKA A M I
01072009 AMI 01000013)
[ 0.005725] ACPI: FACP 0x00000000ACC15000 000114 (v06 ALASKA A M I
01072009 AMI 00010013)
[ 0.005729] ACPI: DSDT 0x00000000ACC0F000 00576B (v02 ALASKA A M I
01072009 INTL 20120913)
[ 0.005731] ACPI: FACS 0x00000000AD284000 000040
[ 0.005733] ACPI: BHMB 0x00000000ACC24000 000474 (v01 ALASKA A M I
00000001 AMI 00000001)
[ 0.005735] ACPI: SSDT 0x00000000ACC1B000 008C98 (v02 AMD AmdTable
00000002 MSFT 04000000)
[ 0.005737] ACPI: SSDT 0x00000000ACC17000 003ACF (v01 AMD AMD AOD
00000001 INTL 20120913)
[ 0.005739] ACPI: SSDT 0x00000000ACC16000 000221 (v02 ALASKA CPUSSDT
01072009 AMI 01072009)
[ 0.005741] ACPI: FIDT 0x00000000ACC0E000 00009C (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.005743] ACPI: MCFG 0x00000000ACC0D000 00003C (v01 ALASKA A M I
01072009 MSFT 00010013)
[ 0.005745] ACPI: HPET 0x00000000ACC0C000 000038 (v01 ALASKA A M I
01072009 AMI 00000005)
[ 0.005747] ACPI: IVRS 0x00000000ACC0A000 0000D0 (v02 AMD AmdTable
00000001 AMD 00000000)
[ 0.005749] ACPI: PCCT 0x00000000ACC09000 00006E (v02 AMD AmdTable
00000001 AMD 00000000)
[ 0.005750] ACPI: CRAT 0x00000000ACC08000 000ED8 (v01 AMD AmdTable
00000001 AMD 00000001)
[ 0.005753] ACPI: CDIT 0x00000000ACC07000 000029 (v01 AMD AmdTable
00000001 AMD 00000001)
[ 0.005754] ACPI: SSDT 0x00000000ACC03000 003282 (v01 AMD AmdTable
00000001 INTL 20120913)
[ 0.005756] ACPI: WSMT 0x00000000ACC02000 000028 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.005758] ACPI: APIC 0x00000000ACC01000 00015E (v03 ALASKA A M I
01072009 AMI 00010013)
[ 0.005760] ACPI: SSDT 0x00000000ACC00000 0000BF (v01 AMD AmdTable
00001000 INTL 20120913)
[ 0.005762] ACPI: FPDT 0x00000000ACBFF000 000044 (v01 ALASKA A M I
01072009 AMI 01000013)
[ 0.005767] ACPI: Local APIC address 0xfee00000
[ 0.005786] Zone ranges:
[ 0.005787] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.005788] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.005789] Normal [mem 0x0000000100000000-0x000000044f37ffff]
[ 0.005790] Movable zone start for each node
[ 0.005790] Early memory node ranges
[ 0.005791] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.005792] node 0: [mem 0x0000000000100000-0x0000000009bfefff]
[ 0.005793] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.005793] node 0: [mem 0x000000000a210000-0x000000000affffff]
[ 0.005794] node 0: [mem 0x000000000b020000-0x00000000ac89dfff]
[ 0.005795] node 0: [mem 0x00000000addff000-0x00000000aeffffff]
[ 0.005796] node 0: [mem 0x0000000100000000-0x000000044f37ffff]
[ 0.005870] Zeroed struct page in unavailable ranges: 13942 pages
[ 0.005871] Initmem setup node 0 [mem
0x0000000000001000-0x000000044f37ffff]
[ 0.005873] On node 0 totalpages: 4180362
[ 0.005874] DMA zone: 64 pages used for memmap
[ 0.005874] DMA zone: 21 pages reserved
[ 0.005875] DMA zone: 3996 pages, LIFO batch:0
[ 0.005894] DMA32 zone: 11034 pages used for memmap
[ 0.005894] DMA32 zone: 706158 pages, LIFO batch:63
[ 0.010205] Normal zone: 54222 pages used for memmap
[ 0.010207] Normal zone: 3470208 pages, LIFO batch:63
[ 0.012474] ACPI: PM-Timer IO Port: 0x808
[ 0.012476] ACPI: Local APIC address 0xfee00000
[ 0.012482] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.012493] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000,
GSI 0-23
[ 0.012499] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000,
GSI 24-55
[ 0.012500] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.012502] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.012503] ACPI: IRQ0 used by override.
[ 0.012504] ACPI: IRQ9 used by override.
[ 0.012505] Using ACPI (MADT) for SMP configuration information
[ 0.012507] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.012510] smpboot: Allowing 32 CPUs, 16 hotplug CPUs
[ 0.012530] PM: hibernation: Registered nosave memory: [mem
0x00000000-0x00000fff]
[ 0.012532] PM: hibernation: Registered nosave memory: [mem
0x0009d000-0x0009dfff]
[ 0.012533] PM: hibernation: Registered nosave memory: [mem
0x0009e000-0x0009ffff]
[ 0.012533] PM: hibernation: Registered nosave memory: [mem
0x000a0000-0x000dffff]
[ 0.012534] PM: hibernation: Registered nosave memory: [mem
0x000e0000-0x000fffff]
[ 0.012535] PM: hibernation: Registered nosave memory: [mem
0x09bff000-0x09ffffff]
[ 0.012536] PM: hibernation: Registered nosave memory: [mem
0x0a200000-0x0a20ffff]
[ 0.012538] PM: hibernation: Registered nosave memory: [mem
0x0b000000-0x0b01ffff]
[ 0.012539] PM: hibernation: Registered nosave memory: [mem
0xac89e000-0xacbf2fff]
[ 0.012540] PM: hibernation: Registered nosave memory: [mem
0xacbf3000-0xacc24fff]
[ 0.012540] PM: hibernation: Registered nosave memory: [mem
0xacc25000-0xad2a0fff]
[ 0.012541] PM: hibernation: Registered nosave memory: [mem
0xad2a1000-0xaddfefff]
[ 0.012542] PM: hibernation: Registered nosave memory: [mem
0xaf000000-0xafffffff]
[ 0.012543] PM: hibernation: Registered nosave memory: [mem
0xb0000000-0xefffffff]
[ 0.012544] PM: hibernation: Registered nosave memory: [mem
0xf0000000-0xf7ffffff]
[ 0.012544] PM: hibernation: Registered nosave memory: [mem
0xf8000000-0xfd1fffff]
[ 0.012545] PM: hibernation: Registered nosave memory: [mem
0xfd200000-0xfd2fffff]
[ 0.012545] PM: hibernation: Registered nosave memory: [mem
0xfd300000-0xfd5fffff]
[ 0.012546] PM: hibernation: Registered nosave memory: [mem
0xfd600000-0xfd7fffff]
[ 0.012547] PM: hibernation: Registered nosave memory: [mem
0xfd800000-0xfe9fffff]
[ 0.012547] PM: hibernation: Registered nosave memory: [mem
0xfea00000-0xfea0ffff]
[ 0.012548] PM: hibernation: Registered nosave memory: [mem
0xfea10000-0xfeb7ffff]
[ 0.012548] PM: hibernation: Registered nosave memory: [mem
0xfeb80000-0xfec01fff]
[ 0.012549] PM: hibernation: Registered nosave memory: [mem
0xfec02000-0xfec0ffff]
[ 0.012550] PM: hibernation: Registered nosave memory: [mem
0xfec10000-0xfec10fff]
[ 0.012550] PM: hibernation: Registered nosave memory: [mem
0xfec11000-0xfec2ffff]
[ 0.012551] PM: hibernation: Registered nosave memory: [mem
0xfec30000-0xfec30fff]
[ 0.012551] PM: hibernation: Registered nosave memory: [mem
0xfec31000-0xfecfffff]
[ 0.012552] PM: hibernation: Registered nosave memory: [mem
0xfed00000-0xfed00fff]
[ 0.012553] PM: hibernation: Registered nosave memory: [mem
0xfed01000-0xfed3ffff]
[ 0.012553] PM: hibernation: Registered nosave memory: [mem
0xfed40000-0xfed44fff]
[ 0.012554] PM: hibernation: Registered nosave memory: [mem
0xfed45000-0xfed7ffff]
[ 0.012554] PM: hibernation: Registered nosave memory: [mem
0xfed80000-0xfed8ffff]
[ 0.012555] PM: hibernation: Registered nosave memory: [mem
0xfed90000-0xfedc1fff]
[ 0.012556] PM: hibernation: Registered nosave memory: [mem
0xfedc2000-0xfedcffff]
[ 0.012556] PM: hibernation: Registered nosave memory: [mem
0xfedd0000-0xfedd3fff]
[ 0.012557] PM: hibernation: Registered nosave memory: [mem
0xfedd4000-0xfedd5fff]
[ 0.012557] PM: hibernation: Registered nosave memory: [mem
0xfedd6000-0xfeffffff]
[ 0.012558] PM: hibernation: Registered nosave memory: [mem
0xff000000-0xffffffff]
[ 0.012560] [mem 0xb0000000-0xefffffff] available for PCI devices
[ 0.012561] Booting paravirtualized kernel on bare hardware
[ 0.012564] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.015763] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128
nr_cpu_ids:32 nr_node_ids:1
[ 0.016863] percpu: Embedded 58 pages/cpu s200704 r8192 d28672 u262144
[ 0.016869] pcpu-alloc: s200704 r8192 d28672 u262144 alloc=1*2097152
[ 0.016869] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11
12 13 14 15
[ 0.016872] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27
28 29 30 31
[ 0.016890] Built 1 zonelists, mobility grouping on. Total pages:
4115021
[ 0.016892] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.9.0-rc1+
root=/dev/disk/by-label/LEAP-15.2 video=1600x1200 noresume showopts
apm=off splash=verbose audit=0
[ 0.016959] audit: disabled (until reboot)
[ 0.016962] printk: log_buf_len individual max cpu contribution:
32768 bytes
[ 0.016963] printk: log_buf_len total cpu_extra contributions:
1015808 bytes
[ 0.016964] printk: log_buf_len min size: 262144 bytes
[ 0.017182] printk: log_buf_len: 2097152 bytes
[ 0.017183] printk: early log buf free: 247620(94%)
[ 0.018737] Dentry cache hash table entries: 2097152 (order: 12,
16777216 bytes, linear)
[ 0.019538] Inode-cache hash table entries: 1048576 (order: 11,
8388608 bytes, linear)
[ 0.019608] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.031384] Memory: 2893744K/16721448K available (12291K kernel code,
1449K rwdata, 4040K rodata, 1640K init, 3228K bss, 403052K reserved, 0K
cma-reserved)
[ 0.031434] random: get_random_u64 called from
cache_random_seq_create+0x5f/0x140 with crng_init=0
[ 0.031497] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.031509] ftrace: allocating 39243 entries in 154 pages
[ 0.041207] ftrace: allocated 154 pages with 4 groups
[ 0.041309] rcu: Preemptible hierarchical RCU implementation.
[ 0.041310] rcu: RCU dyntick-idle grace-period acceleration is
enabled.
[ 0.041311] rcu: RCU restricting CPUs from NR_CPUS=128 to
nr_cpu_ids=32.
[ 0.041311] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.041312] Trampoline variant of Tasks RCU enabled.
[ 0.041313] Rude variant of Tasks RCU enabled.
[ 0.041313] Tracing variant of Tasks RCU enabled.
[ 0.041314] rcu: RCU calculated value of scheduler-enlistment delay
is 100 jiffies.
[ 0.041315] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.043613] NR_IRQS: 8448, nr_irqs: 1224, preallocated irqs: 16
[ 0.043781] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.043924] spurious 8259A interrupt: IRQ7.
[ 0.043935] Console: colour dummy device 80x25
[ 0.044174] printk: console [tty0] enabled
[ 0.044185] ACPI: Core revision 20200717
[ 0.044292] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484873504 ns
[ 0.044308] APIC: Switch to symmetric I/O mode setup
[ 0.364488] Switched APIC routing to physical flat.
[ 0.365105] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.369295] clocksource: tsc-early: mask: 0xffffffffffffffff
max_cycles: 0x7039bb22ad2, max_idle_ns: 881590412535 ns
[ 0.369298] Calibrating delay loop (skipped), value calculated using
timer frequency.. 7785.64 BogoMIPS (lpj=3892822)
[ 0.369301] pid_max: default: 32768 minimum: 301
[ 0.369323] LSM: Security Framework initializing
[ 0.369335] SELinux: Initializing.
[ 0.369349] TOMOYO Linux initialized
[ 0.369396] Mount-cache hash table entries: 32768 (order: 6, 262144
bytes, linear)
[ 0.369420] Mountpoint-cache hash table entries: 32768 (order: 6,
262144 bytes, linear)
[ 0.369595] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.369649] LVT offset 1 assigned for vector 0xf9
[ 0.369786] LVT offset 2 assigned for vector 0xf4
[ 0.369820] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.369821] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.369824] Spectre V1 : Mitigation: usercopy/swapgs barriers and
__user pointer sanitization
[ 0.369827] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.369829] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling
RSB on context switch
[ 0.369831] Spectre V2 : mitigation: Enabling conditional Indirect
Branch Prediction Barrier
[ 0.369834] Spectre V2 : User space: Mitigation: STIBP via seccomp
and prctl
[ 0.369836] Speculative Store Bypass: Mitigation: Speculative Store
Bypass disabled via prctl and seccomp
[ 0.369967] Freeing SMP alternatives memory: 32K
[ 0.473532] smpboot: CPU0: AMD Ryzen 7 3800X 8-Core Processor
(family: 0x17, model: 0x71, stepping: 0x0)
[ 0.473588] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.473593] ... version: 0
[ 0.473594] ... bit width: 48
[ 0.473595] ... generic registers: 6
[ 0.473597] ... value mask: 0000ffffffffffff
[ 0.473598] ... max period: 00007fffffffffff
[ 0.473600] ... fixed-purpose events: 0
[ 0.473601] ... event mask: 000000000000003f
[ 0.473623] rcu: Hierarchical SRCU implementation.
[ 0.473727] NMI watchdog: Enabled. Permanently consumes one hw-PMU
counter.
[ 0.473886] smp: Bringing up secondary CPUs ...
[ 0.473942] x86: Booting SMP configuration:
[ 0.473944] .... node #0, CPUs: #1
[ 0.320493] __common_interrupt: 1.55 No irq handler for vector
[ 0.475350] #2
[ 0.320493] __common_interrupt: 2.55 No irq handler for vector
[ 0.476350] #3
[ 0.320493] __common_interrupt: 3.55 No irq handler for vector
[ 0.477346] #4
[ 0.320493] __common_interrupt: 4.55 No irq handler for vector
[ 0.478351] #5
[ 0.320493] __common_interrupt: 5.55 No irq handler for vector
[ 0.480351] #6
[ 0.320493] __common_interrupt: 6.55 No irq handler for vector
[ 0.481350] #7
[ 0.320493] __common_interrupt: 7.55 No irq handler for vector
[ 0.482350] #8
[ 0.320493] __common_interrupt: 8.55 No irq handler for vector
[ 0.483388] #9
[ 0.320493] __common_interrupt: 9.55 No irq handler for vector
[ 0.485354] #10
[ 0.320493] __common_interrupt: 10.55 No irq handler for vector
[ 0.486349] #11 #12 #13 #14 #15
[ 0.492322] smp: Brought up 1 node, 16 CPUs
[ 0.492322] smpboot: Max logical packages: 2
[ 0.492322] smpboot: Total of 16 processors activated (124570.30
BogoMIPS)
[ 0.508732] node 0 deferred pages initialised in 15ms
[ 0.508734] devtmpfs: initialized
[ 0.508734] PM: Registering ACPI NVS region [mem
0x0a200000-0x0a20ffff] (65536 bytes)
[ 0.508734] PM: Registering ACPI NVS region [mem
0xacc25000-0xad2a0fff] (6799360 bytes)
[ 0.509308] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.509310] futex hash table entries: 8192 (order: 7, 524288 bytes,
linear)
[ 0.509567] pinctrl core: initialized pinctrl subsystem
[ 0.509659] PM: RTC time: 21:00:59, date: 2020-11-25
[ 0.509780] NET: Registered protocol family 16
[ 0.509859] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic
allocations
[ 0.509867] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for
atomic allocations
[ 0.509876] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for
atomic allocations
[ 0.509927] thermal_sys: Registered thermal governor 'fair_share'
[ 0.509927] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.509929] thermal_sys: Registered thermal governor 'step_wise'
[ 0.509931] thermal_sys: Registered thermal governor 'user_space'
[ 0.509941] cpuidle: using governor ladder
[ 0.509941] cpuidle: using governor menu
[ 0.509941] Detected 1 PCC Subspaces
[ 0.509941] Registering PCC driver as Mailbox controller
[ 0.510354] ACPI: bus type PCI registered
[ 0.510358] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.510427] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem
0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.510432] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.510444] PCI: Using configuration type 1 for base access
[ 0.510444] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.510444] mtrr: probably your BIOS does not setup all CPUs.
[ 0.510444] mtrr: corrected configuration.
[ 0.511502] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.511502] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.512351] fbcon: Taking over console
[ 0.512376] ACPI: Added _OSI(Module Device)
[ 0.512378] ACPI: Added _OSI(Processor Device)
[ 0.512380] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.512381] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.512383] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.512385] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.512386] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.520579] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.521418] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.524121] ACPI: Interpreter enabled
[ 0.524133] ACPI: (supports S0 S4 S5)
[ 0.524135] ACPI: Using IOAPIC for interrupt routing
[ 0.524354] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.524595] ACPI: Enabled 7 GPEs in block 00 to 1F
[ 0.529668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.529673] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI HPX-Type3]
[ 0.529678] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.529682] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain
0000 [bus 00-7f] only partially covers this bridge
[ 0.529860] PCI host bridge to bus 0000:00
[ 0.529862] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.529865] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.529867] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.529869] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.529871] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.529873] pci_bus 0000:00: root bus resource [mem
0x000c0000-0x000dffff window]
[ 0.529876] pci_bus 0000:00: root bus resource [mem
0xb0000000-0xefffffff window]
[ 0.529878] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.529890] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
[ 0.529971] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
[ 0.530058] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
[ 0.530125] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
[ 0.530156] pci 0000:00:01.1: enabling Extended Tags
[ 0.530211] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.530321] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
[ 0.530384] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
[ 0.530448] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
[ 0.530478] pci 0000:00:03.1: enabling Extended Tags
[ 0.530532] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.530634] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
[ 0.530696] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
[ 0.530760] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
[ 0.530820] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
[ 0.530845] pci 0000:00:07.1: enabling Extended Tags
[ 0.530884] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.530966] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
[ 0.531029] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
[ 0.531056] pci 0000:00:08.1: enabling Extended Tags
[ 0.531097] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.531198] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.531304] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.531416] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
[ 0.531451] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
[ 0.531486] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
[ 0.531520] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
[ 0.531554] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
[ 0.531588] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
[ 0.531622] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
[ 0.531657] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
[ 0.531757] pci 0000:01:00.0: [1022:43ee] type 00 class 0x0c0330
[ 0.531778] pci 0000:01:00.0: reg 0x10: [mem 0xe67a0000-0xe67a7fff 64bit]
[ 0.531825] pci 0000:01:00.0: enabling Extended Tags
[ 0.531880] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.531964] pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601
[ 0.532019] pci 0000:01:00.1: reg 0x24: [mem 0xe6780000-0xe679ffff]
[ 0.532029] pci 0000:01:00.1: reg 0x30: [mem 0xe6700000-0xe677ffff pref]
[ 0.532037] pci 0000:01:00.1: enabling Extended Tags
[ 0.532084] pci 0000:01:00.1: PME# supported from D3hot D3cold
[ 0.532150] pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400
[ 0.532201] pci 0000:01:00.2: enabling Extended Tags
[ 0.532254] pci 0000:01:00.2: PME# supported from D3hot D3cold
[ 0.532351] pci 0000:00:01.1: PCI bridge to [bus 01-13]
[ 0.532355] pci 0000:00:01.1: bridge window [io 0x8000-0xefff]
[ 0.532359] pci 0000:00:01.1: bridge window [mem 0xd8000000-0xe67fffff]
[ 0.532364] pci 0000:00:01.1: bridge window [mem
0xc0000000-0xc8ffffff 64bit pref]
[ 0.532465] pci 0000:02:00.0: [1022:43ea] type 01 class 0x060400
[ 0.532519] pci 0000:02:00.0: enabling Extended Tags
[ 0.532578] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.532671] pci 0000:02:01.0: [1022:43ea] type 01 class 0x060400
[ 0.532725] pci 0000:02:01.0: enabling Extended Tags
[ 0.532784] pci 0000:02:01.0: PME# supported from D3hot D3cold
[ 0.532875] pci 0000:02:02.0: [1022:43ea] type 01 class 0x060400
[ 0.532929] pci 0000:02:02.0: enabling Extended Tags
[ 0.532988] pci 0000:02:02.0: PME# supported from D3hot D3cold
[ 0.533078] pci 0000:02:03.0: [1022:43ea] type 01 class 0x060400
[ 0.533133] pci 0000:02:03.0: enabling Extended Tags
[ 0.533192] pci 0000:02:03.0: PME# supported from D3hot D3cold
[ 0.533289] pci 0000:02:08.0: [1022:43ea] type 01 class 0x060400
[ 0.533345] pci 0000:02:08.0: enabling Extended Tags
[ 0.533404] pci 0000:02:08.0: PME# supported from D3hot D3cold
[ 0.533498] pci 0000:02:09.0: [1022:43ea] type 01 class 0x060400
[ 0.533552] pci 0000:02:09.0: enabling Extended Tags
[ 0.533612] pci 0000:02:09.0: PME# supported from D3hot D3cold
[ 0.533713] pci 0000:01:00.2: PCI bridge to [bus 02-13]
[ 0.533719] pci 0000:01:00.2: bridge window [io 0x8000-0xefff]
[ 0.533723] pci 0000:01:00.2: bridge window [mem 0xd8000000-0xe66fffff]
[ 0.533730] pci 0000:01:00.2: bridge window [mem
0xc0000000-0xc8ffffff 64bit pref]
[ 0.533817] pci 0000:03:00.0: [1447:1310] type 00 class 0x058000
[ 0.533861] pci 0000:03:00.0: reg 0x10: [mem 0xe2000000-0xe3ffffff]
[ 0.533886] pci 0000:03:00.0: reg 0x14: [mem 0xe4010000-0xe401ffff]
[ 0.533910] pci 0000:03:00.0: reg 0x18: [mem 0xe4000000-0xe400ffff]
[ 0.534133] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.534259] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.534267] pci 0000:02:00.0: bridge window [mem 0xe2000000-0xe40fffff]
[ 0.534331] pci 0000:04:00.0: [1b4b:9215] type 00 class 0x010601
[ 0.534355] pci 0000:04:00.0: reg 0x10: [io 0xe050-0xe057]
[ 0.534368] pci 0000:04:00.0: reg 0x14: [io 0xe040-0xe043]
[ 0.534382] pci 0000:04:00.0: reg 0x18: [io 0xe030-0xe037]
[ 0.534395] pci 0000:04:00.0: reg 0x1c: [io 0xe020-0xe023]
[ 0.534408] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe01f]
[ 0.534422] pci 0000:04:00.0: reg 0x24: [mem 0xe6610000-0xe66107ff]
[ 0.534435] pci 0000:04:00.0: reg 0x30: [mem 0xe6600000-0xe660ffff pref]
[ 0.534515] pci 0000:04:00.0: PME# supported from D3hot
[ 0.534612] pci 0000:02:01.0: PCI bridge to [bus 04]
[ 0.534619] pci 0000:02:01.0: bridge window [io 0xe000-0xefff]
[ 0.534623] pci 0000:02:01.0: bridge window [mem 0xe6600000-0xe66fffff]
[ 0.534700] pci 0000:05:00.0: [104c:8231] type 01 class 0x060400
[ 0.534902] pci 0000:05:00.0: supports D1 D2
[ 0.534975] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
[ 0.534987] pci 0000:02:02.0: PCI bridge to [bus 05-0d]
[ 0.534994] pci 0000:02:02.0: bridge window [io 0x8000-0xafff]
[ 0.534998] pci 0000:02:02.0: bridge window [mem 0xe4800000-0xe62fffff]
[ 0.535004] pci 0000:02:02.0: bridge window [mem
0xc0000000-0xc8ffffff 64bit pref]
[ 0.535077] pci_bus 0000:06: extended config space not accessible
[ 0.535114] pci 0000:06:04.0: [12d8:8150] type 01 class 0x060400
[ 0.535397] pci 0000:05:00.0: PCI bridge to [bus 06-0d]
[ 0.535408] pci 0000:05:00.0: bridge window [io 0x8000-0xafff]
[ 0.535415] pci 0000:05:00.0: bridge window [mem 0xe4800000-0xe62fffff]
[ 0.535426] pci 0000:05:00.0: bridge window [mem
0xc0000000-0xc8ffffff 64bit pref]
[ 0.535469] pci_bus 0000:07: extended config space not accessible
[ 0.535508] pci 0000:07:04.0: [10b7:9200] type 00 class 0x020000
[ 0.535553] pci 0000:07:04.0: reg 0x10: [io 0xa200-0xa27f]
[ 0.535578] pci 0000:07:04.0: reg 0x14: [mem 0xe6246000-0xe624607f]
[ 0.535695] pci 0000:07:04.0: reg 0x30: [mem 0xe6200000-0xe621ffff pref]
[ 0.535768] pci 0000:07:04.0: supports D1 D2
[ 0.535769] pci 0000:07:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.535834] pci 0000:07:05.0: [9004:3860] type 00 class 0x010000
[ 0.535879] pci 0000:07:05.0: reg 0x10: [io 0xa100-0xa1ff]
[ 0.535903] pci 0000:07:05.0: reg 0x14: [mem 0xe6245000-0xe6245fff]
[ 0.536020] pci 0000:07:05.0: reg 0x30: [mem 0xe6230000-0xe623ffff pref]
[ 0.536149] pci 0000:07:06.0: [9004:3860] type 00 class 0x010000
[ 0.536193] pci 0000:07:06.0: reg 0x10: [io 0xa000-0xa0ff]
[ 0.536218] pci 0000:07:06.0: reg 0x14: [mem 0xe6244000-0xe6244fff]
[ 0.536334] pci 0000:07:06.0: reg 0x30: [mem 0xe6220000-0xe622ffff pref]
[ 0.536469] pci 0000:07:07.0: [10b5:0480] type 00 class 0x0e8000
[ 0.536514] pci 0000:07:07.0: reg 0x10: [mem 0xe6243000-0xe62433ff]
[ 0.536540] pci 0000:07:07.0: reg 0x14: [mem 0xe5000000-0xe57fffff]
[ 0.536565] pci 0000:07:07.0: reg 0x18: [mem 0xe6242000-0xe624200f]
[ 0.536837] pci 0000:07:08.0: [10b5:0480] type 00 class 0x0e8000
[ 0.536883] pci 0000:07:08.0: reg 0x10: [mem 0xe6241000-0xe62413ff]
[ 0.536909] pci 0000:07:08.0: reg 0x14: [mem 0xe4800000-0xe4ffffff]
[ 0.536934] pci 0000:07:08.0: reg 0x18: [mem 0xe6240000-0xe624000f]
[ 0.537207] pci 0000:07:09.0: [3388:0022] type 01 class 0x060400
[ 0.537433] pci 0000:07:09.0: supports D1 D2
[ 0.537435] pci 0000:07:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.537522] pci 0000:07:0c.0: [12d8:8150] type 01 class 0x060400
[ 0.537831] pci 0000:06:04.0: PCI bridge to [bus 07-0d]
[ 0.537844] pci 0000:06:04.0: bridge window [io 0x8000-0xafff]
[ 0.537851] pci 0000:06:04.0: bridge window [mem 0xe4800000-0xe62fffff]
[ 0.537864] pci 0000:06:04.0: bridge window [mem
0xc0000000-0xc8ffffff 64bit pref]
[ 0.537925] pci_bus 0000:08: extended config space not accessible
[ 0.537955] pci 0000:08:00.0: [1090:4710] type 00 class 0xff0000
[ 0.538004] pci 0000:08:00.0: reg 0x10: [mem 0xe6100000-0xe61001ff]
[ 0.538032] pci 0000:08:00.0: reg 0x14: [mem 0xc8000000-0xc8ffffff pref]
[ 0.538380] pci 0000:07:09.0: PCI bridge to [bus 08]
[ 0.538401] pci 0000:07:09.0: bridge window [mem 0xe6100000-0xe61fffff]
[ 0.538416] pci 0000:07:09.0: bridge window [mem
0xc8000000-0xc8ffffff 64bit pref]
[ 0.538470] pci_bus 0000:09: extended config space not accessible
[ 0.538521] pci 0000:09:04.0: [3388:0022] type 01 class 0x060400
[ 0.538771] pci 0000:09:04.0: supports D1 D2
[ 0.538773] pci 0000:09:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.538865] pci 0000:09:05.0: [3388:0022] type 01 class 0x060400
[ 0.539118] pci 0000:09:05.0: supports D1 D2
[ 0.539119] pci 0000:09:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.539212] pci 0000:09:06.0: [3388:0022] type 01 class 0x060400
[ 0.539462] pci 0000:09:06.0: supports D1 D2
[ 0.539464] pci 0000:09:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.539542] pci 0000:09:07.0: [10b5:9030] type 00 class 0x070002
[ 0.539592] pci 0000:09:07.0: reg 0x10: [mem 0xe6011000-0xe601107f]
[ 0.539619] pci 0000:09:07.0: reg 0x14: [io 0x9180-0x91ff]
[ 0.539647] pci 0000:09:07.0: reg 0x18: [io 0x9100-0x917f]
[ 0.539815] pci 0000:09:08.0: [114f:0027] type 00 class 0x078000
[ 0.539865] pci 0000:09:08.0: reg 0x10: [mem 0xe5800000-0xe5bfffff]
[ 0.540021] pci 0000:09:08.0: reg 0x30: [mem 0xe6000000-0xe600ffff pref]
[ 0.540086] pci 0000:09:09.0: [1090:4360] type 00 class 0x058000
[ 0.540136] pci 0000:09:09.0: reg 0x10: [mem 0xe6010000-0xe60100ff]
[ 0.540163] pci 0000:09:09.0: reg 0x14: [io 0x9000-0x90ff]
[ 0.540191] pci 0000:09:09.0: reg 0x18: [mem 0xc0000000-0xc3ffffff pref]
[ 0.540298] pci 0000:09:09.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[ 0.540377] pci 0000:09:0a.0: [3388:0022] type 01 class 0x060400
[ 0.540628] pci 0000:09:0a.0: supports D1 D2
[ 0.540630] pci 0000:09:0a.0: PME# supported from D0 D1 D2 D3hot
[ 0.540771] pci 0000:07:0c.0: PCI bridge to [bus 09-0d]
[ 0.540785] pci 0000:07:0c.0: bridge window [io 0x8000-0x9fff]
[ 0.540794] pci 0000:07:0c.0: bridge window [mem 0xe5800000-0xe60fffff]
[ 0.540808] pci 0000:07:0c.0: bridge window [mem
0xc0000000-0xc6ffffff 64bit pref]
[ 0.540875] pci_bus 0000:0a: extended config space not accessible
[ 0.540908] pci 0000:0a:00.0: [1090:4710] type 00 class 0xff0000
[ 0.540965] pci 0000:0a:00.0: reg 0x10: [mem 0xe5f00000-0xe5f001ff]
[ 0.540996] pci 0000:0a:00.0: reg 0x14: [mem 0xc6000000-0xc6ffffff pref]
[ 0.541397] pci 0000:09:04.0: PCI bridge to [bus 0a]
[ 0.541420] pci 0000:09:04.0: bridge window [mem 0xe5f00000-0xe5ffffff]
[ 0.541436] pci 0000:09:04.0: bridge window [mem
0xc6000000-0xc6ffffff 64bit pref]
[ 0.541507] pci_bus 0000:0b: extended config space not accessible
[ 0.541538] pci 0000:0b:00.0: [1090:4710] type 00 class 0xff0000
[ 0.541595] pci 0000:0b:00.0: reg 0x10: [mem 0xe5e00000-0xe5e001ff]
[ 0.541627] pci 0000:0b:00.0: reg 0x14: [mem 0xc5000000-0xc5ffffff pref]
[ 0.542026] pci 0000:09:05.0: PCI bridge to [bus 0b]
[ 0.542050] pci 0000:09:05.0: bridge window [mem 0xe5e00000-0xe5efffff]
[ 0.542066] pci 0000:09:05.0: bridge window [mem
0xc5000000-0xc5ffffff 64bit pref]
[ 0.542137] pci_bus 0000:0c: extended config space not accessible
[ 0.542169] pci 0000:0c:00.0: [1090:4710] type 00 class 0xff0000
[ 0.542226] pci 0000:0c:00.0: reg 0x10: [mem 0xe5d00000-0xe5d001ff]
[ 0.542258] pci 0000:0c:00.0: reg 0x14: [mem 0xc4000000-0xc4ffffff pref]
[ 0.542656] pci 0000:09:06.0: PCI bridge to [bus 0c]
[ 0.542679] pci 0000:09:06.0: bridge window [mem 0xe5d00000-0xe5dfffff]
[ 0.542695] pci 0000:09:06.0: bridge window [mem
0xc4000000-0xc4ffffff 64bit pref]
[ 0.542766] pci_bus 0000:0d: extended config space not accessible
[ 0.542790] pci 0000:0d:00.0: [1090:0100] type 00 class 0xff0000
[ 0.542847] pci 0000:0d:00.0: reg 0x10: [mem 0xe5c0a000-0xe5c0afff]
[ 0.542879] pci 0000:0d:00.0: reg 0x14: [mem 0xe5c08000-0xe5c09fff]
[ 0.542910] pci 0000:0d:00.0: reg 0x18: [mem 0xe5c00000-0xe5c07fff]
[ 0.543214] pci 0000:09:0a.0: PCI bridge to [bus 0d]
[ 0.543230] pci 0000:09:0a.0: bridge window [io 0x8000-0x8fff]
[ 0.543239] pci 0000:09:0a.0: bridge window [mem 0xe5c00000-0xe5cfffff]
[ 0.543445] pci 0000:0e:00.0: [104c:8231] type 01 class 0x060400
[ 0.543647] pci 0000:0e:00.0: supports D1 D2
[ 0.543721] pci 0000:0e:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
[ 0.543734] pci 0000:02:03.0: PCI bridge to [bus 0e-10]
[ 0.543740] pci 0000:02:03.0: bridge window [io 0xd000-0xdfff]
[ 0.543744] pci 0000:02:03.0: bridge window [mem 0xd8000000-0xe00fffff]
[ 0.543820] pci_bus 0000:0f: extended config space not accessible
[ 0.543857] pci 0000:0f:04.0: [12d8:8150] type 01 class 0x060400
[ 0.544137] pci 0000:0e:00.0: PCI bridge to [bus 0f-10]
[ 0.544148] pci 0000:0e:00.0: bridge window [io 0xd000-0xdfff]
[ 0.544155] pci 0000:0e:00.0: bridge window [mem 0xd8000000-0xe00fffff]
[ 0.544207] pci_bus 0000:10: extended config space not accessible
[ 0.544240] pci 0000:10:04.0: [13c0:0080] type 00 class 0x078000
[ 0.544284] pci 0000:10:04.0: reg 0x10: [mem 0xe000c000-0xe000c0ff]
[ 0.544484] pci 0000:10:06.0: [1093:c801] type 00 class 0x078000
[ 0.544528] pci 0000:10:06.0: reg 0x10: [mem 0xe000b000-0xe000b7ff]
[ 0.544553] pci 0000:10:06.0: reg 0x14: [mem 0xe0004000-0xe0007fff]
[ 0.544730] pci 0000:10:08.0: [1093:c801] type 00 class 0x078000
[ 0.544774] pci 0000:10:08.0: reg 0x10: [mem 0xe000a000-0xe000a7ff]
[ 0.544799] pci 0000:10:08.0: reg 0x14: [mem 0xe0000000-0xe0003fff]
[ 0.544975] pci 0000:10:09.0: [9710:9805] type 00 class 0x078000
[ 0.545019] pci 0000:10:09.0: reg 0x10: [io 0xd150-0xd157]
[ 0.545044] pci 0000:10:09.0: reg 0x14: [io 0xd140-0xd147]
[ 0.545069] pci 0000:10:09.0: reg 0x18: [io 0xd130-0xd137]
[ 0.545093] pci 0000:10:09.0: reg 0x1c: [io 0xd120-0xd127]
[ 0.545118] pci 0000:10:09.0: reg 0x20: [io 0xd110-0xd117]
[ 0.545143] pci 0000:10:09.0: reg 0x24: [io 0xd100-0xd10f]
[ 0.545236] pci 0000:10:0a.0: [114a:5565] type 00 class 0x028000
[ 0.545280] pci 0000:10:0a.0: reg 0x10: [mem 0xe0009000-0xe00091ff]
[ 0.545308] pci 0000:10:0a.0: reg 0x14: [io 0xd000-0xd0ff]
[ 0.545332] pci 0000:10:0a.0: reg 0x18: [mem 0xe0008000-0xe000803f]
[ 0.545357] pci 0000:10:0a.0: reg 0x1c: [mem 0xd8000000-0xdfffffff]
[ 0.545623] pci 0000:0f:04.0: PCI bridge to [bus 10]
[ 0.545635] pci 0000:0f:04.0: bridge window [io 0xd000-0xdfff]
[ 0.545642] pci 0000:0f:04.0: bridge window [mem 0xd8000000-0xe00fffff]
[ 0.545746] pci 0000:11:00.0: [1b21:1080] type 01 class 0x060401
[ 0.545931] pci 0000:02:08.0: PCI bridge to [bus 11-12]
[ 0.545937] pci 0000:02:08.0: bridge window [io 0xc000-0xcfff]
[ 0.545941] pci 0000:02:08.0: bridge window [mem 0xe6500000-0xe65fffff]
[ 0.545984] pci_bus 0000:12: extended config space not accessible
[ 0.546003] pci 0000:12:00.0: [1090:4610] type 00 class 0xff0000
[ 0.546038] pci 0000:12:00.0: reg 0x10: [io 0xc000-0xc03f]
[ 0.546058] pci 0000:12:00.0: reg 0x14: [mem 0xe6500000-0xe6500fff]
[ 0.546272] pci 0000:11:00.0: PCI bridge to [bus 12] (subtractive decode)
[ 0.546284] pci 0000:11:00.0: bridge window [io 0xc000-0xcfff]
[ 0.546290] pci 0000:11:00.0: bridge window [mem 0xe6500000-0xe65fffff]
[ 0.546303] pci 0000:11:00.0: bridge window [io 0xc000-0xcfff]
(subtractive decode)
[ 0.546305] pci 0000:11:00.0: bridge window [mem
0xe6500000-0xe65fffff] (subtractive decode)
[ 0.546394] pci 0000:13:00.0: [10ec:8125] type 00 class 0x020000
[ 0.546421] pci 0000:13:00.0: reg 0x10: [io 0xb000-0xb0ff]
[ 0.546457] pci 0000:13:00.0: reg 0x18: [mem 0xe6400000-0xe640ffff 64bit]
[ 0.546480] pci 0000:13:00.0: reg 0x20: [mem 0xe6410000-0xe6413fff 64bit]
[ 0.546629] pci 0000:13:00.0: supports D1 D2
[ 0.546631] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.546833] pci 0000:02:09.0: PCI bridge to [bus 13]
[ 0.546839] pci 0000:02:09.0: bridge window [io 0xb000-0xbfff]
[ 0.546843] pci 0000:02:09.0: bridge window [mem 0xe6400000-0xe64fffff]
[ 0.546931] pci 0000:14:00.0: [10de:0092] type 00 class 0x030000
[ 0.546944] pci 0000:14:00.0: reg 0x10: [mem 0xe8000000-0xe8ffffff]
[ 0.546956] pci 0000:14:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff
64bit pref]
[ 0.546968] pci 0000:14:00.0: reg 0x1c: [mem 0xe7000000-0xe7ffffff 64bit]
[ 0.546977] pci 0000:14:00.0: reg 0x24: [io 0xf000-0xf07f]
[ 0.546985] pci 0000:14:00.0: reg 0x30: [mem 0xe9000000-0xe901ffff pref]
[ 0.547069] pci 0000:14:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
[ 0.547077] pci 0000:00:03.1: PCI bridge to [bus 14]
[ 0.547081] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.547084] pci 0000:00:03.1: bridge window [mem 0xe7000000-0xe90fffff]
[ 0.547089] pci 0000:00:03.1: bridge window [mem
0xb0000000-0xbfffffff 64bit pref]
[ 0.547133] pci 0000:15:00.0: [1022:148a] type 00 class 0x130000
[ 0.547171] pci 0000:15:00.0: enabling Extended Tags
[ 0.547285] pci 0000:00:07.1: PCI bridge to [bus 15]
[ 0.547343] pci 0000:16:00.0: [1022:1485] type 00 class 0x130000
[ 0.547388] pci 0000:16:00.0: enabling Extended Tags
[ 0.547498] pci 0000:16:00.1: [1022:1486] type 00 class 0x108000
[ 0.547519] pci 0000:16:00.1: reg 0x18: [mem 0xe9300000-0xe93fffff]
[ 0.547536] pci 0000:16:00.1: reg 0x24: [mem 0xe9408000-0xe9409fff]
[ 0.547547] pci 0000:16:00.1: enabling Extended Tags
[ 0.547646] pci 0000:16:00.3: [1022:149c] type 00 class 0x0c0330
[ 0.547660] pci 0000:16:00.3: reg 0x10: [mem 0xe9200000-0xe92fffff 64bit]
[ 0.547692] pci 0000:16:00.3: enabling Extended Tags
[ 0.547738] pci 0000:16:00.3: PME# supported from D0 D3hot D3cold
[ 0.547809] pci 0000:16:00.4: [1022:1487] type 00 class 0x040300
[ 0.547820] pci 0000:16:00.4: reg 0x10: [mem 0xe9400000-0xe9407fff]
[ 0.547856] pci 0000:16:00.4: enabling Extended Tags
[ 0.547899] pci 0000:16:00.4: PME# supported from D0 D3hot D3cold
[ 0.547990] pci 0000:00:08.1: PCI bridge to [bus 16]
[ 0.547995] pci 0000:00:08.1: bridge window [mem 0xe9200000-0xe94fffff]
[ 0.548018] pci_bus 0000:00: on NUMA node 0
[ 0.548260] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.548305] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.548342] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.548387] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.548427] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.548460] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.548494] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.548528] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.548999] iommu: Default domain type: Translated
[ 0.548999] pci 0000:14:00.0: vgaarb: setting as boot VGA device
[ 0.548999] pci 0000:14:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.548999] pci 0000:14:00.0: vgaarb: bridge control possible
[ 0.548999] vgaarb: loaded
[ 0.548999] SCSI subsystem initialized
[ 0.548999] libata version 3.00 loaded.
[ 0.549382] NetLabel: Initializing
[ 0.549384] NetLabel: domain hash size = 128
[ 0.549386] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.549395] NetLabel: unlabeled traffic allowed by default
[ 0.549397] PCI: Using ACPI for IRQ routing
[ 0.552557] PCI: pci_cache_line_size set to 64 bytes
[ 0.552846] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.552847] e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
[ 0.552847] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.552848] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.552848] e820: reserve RAM buffer [mem 0xac89e000-0xafffffff]
[ 0.552849] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[ 0.552849] e820: reserve RAM buffer [mem 0x44f380000-0x44fffffff]
[ 0.552851] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.552851] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.554332] clocksource: Switched to clocksource tsc-early
[ 0.564429] VFS: Disk quotas dquot_6.6.0
[ 0.564444] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.564496] pnp: PnP ACPI init
[ 0.564605] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.564610] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.564657] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
[ 0.564662] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.564694] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.564812] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.564814] system 00:03: [io 0x0a10-0x0a1f] has been reserved
[ 0.564816] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.564819] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.564845] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[ 0.565039] pnp 00:05: [dma 0 disabled]
[ 0.565062] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.565266] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.565268] system 00:06: [io 0x040b] has been reserved
[ 0.565270] system 00:06: [io 0x04d6] has been reserved
[ 0.565272] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.565274] system 00:06: [io 0x0c14] has been reserved
[ 0.565275] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.565277] system 00:06: [io 0x0c52] has been reserved
[ 0.565279] system 00:06: [io 0x0c6c] has been reserved
[ 0.565281] system 00:06: [io 0x0c6f] has been reserved
[ 0.565283] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.565284] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.565286] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.565288] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.565290] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.565292] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.565294] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.565295] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.565297] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.565299] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.565301] system 00:06: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 0.565304] system 00:06: [mem 0xfec01000-0xfec01fff] could not be
reserved
[ 0.565306] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.565308] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.565310] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be
reserved
[ 0.565313] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.565315] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.565318] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.565664] pnp: PnP ACPI: found 7 devices
[ 0.570942] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.570986] NET: Registered protocol family 2
[ 0.571084] tcp_listen_portaddr_hash hash table entries: 8192 (order:
5, 131072 bytes, linear)
[ 0.571101] TCP established hash table entries: 131072 (order: 8,
1048576 bytes, linear)
[ 0.571221] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes, linear)
[ 0.571328] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.571368] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.571399] UDP-Lite hash table entries: 8192 (order: 6, 262144
bytes, linear)
[ 0.571502] NET: Registered protocol family 1
[ 0.571506] NET: Registered protocol family 44
[ 0.571512] pci 0000:09:09.0: can't claim BAR 6 [mem
0xfffff800-0xffffffff pref]: no compatible bridge window
[ 0.571524] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.571530] pci 0000:02:00.0: bridge window [mem 0xe2000000-0xe40fffff]
[ 0.571540] pci 0000:02:01.0: PCI bridge to [bus 04]
[ 0.571543] pci 0000:02:01.0: bridge window [io 0xe000-0xefff]
[ 0.571548] pci 0000:02:01.0: bridge window [mem 0xe6600000-0xe66fffff]
[ 0.571558] pci 0000:07:09.0: PCI bridge to [bus 08]
[ 0.571570] pci 0000:07:09.0: bridge window [mem 0xe6100000-0xe61fffff]
[ 0.571579] pci 0000:07:09.0: bridge window [mem
0xc8000000-0xc8ffffff 64bit pref]
[ 0.571596] pci 0000:09:09.0: BAR 6: assigned [mem
0xe6010800-0xe6010fff pref]
[ 0.571599] pci 0000:09:04.0: PCI bridge to [bus 0a]
[ 0.571612] pci 0000:09:04.0: bridge window [mem 0xe5f00000-0xe5ffffff]
[ 0.571622] pci 0000:09:04.0: bridge window [mem
0xc6000000-0xc6ffffff 64bit pref]
[ 0.571639] pci 0000:09:05.0: PCI bridge to [bus 0b]
[ 0.571652] pci 0000:09:05.0: bridge window [mem 0xe5e00000-0xe5efffff]
[ 0.571663] pci 0000:09:05.0: bridge window [mem
0xc5000000-0xc5ffffff 64bit pref]
[ 0.571680] pci 0000:09:06.0: PCI bridge to [bus 0c]
[ 0.571693] pci 0000:09:06.0: bridge window [mem 0xe5d00000-0xe5dfffff]
[ 0.571703] pci 0000:09:06.0: bridge window [mem
0xc4000000-0xc4ffffff 64bit pref]
[ 0.571720] pci 0000:09:0a.0: PCI bridge to [bus 0d]
[ 0.571726] pci 0000:09:0a.0: bridge window [io 0x8000-0x8fff]
[ 0.571739] pci 0000:09:0a.0: bridge window [mem 0xe5c00000-0xe5cfffff]
[ 0.571764] pci 0000:07:0c.0: PCI bridge to [bus 09-0d]
[ 0.571769] pci 0000:07:0c.0: bridge window [io 0x8000-0x9fff]
[ 0.571781] pci 0000:07:0c.0: bridge window [mem 0xe5800000-0xe60fffff]
[ 0.571789] pci 0000:07:0c.0: bridge window [mem
0xc0000000-0xc6ffffff 64bit pref]
[ 0.571805] pci 0000:06:04.0: PCI bridge to [bus 07-0d]
[ 0.571809] pci 0000:06:04.0: bridge window [io 0x8000-0xafff]
[ 0.571819] pci 0000:06:04.0: bridge window [mem 0xe4800000-0xe62fffff]
[ 0.571827] pci 0000:06:04.0: bridge window [mem
0xc0000000-0xc8ffffff 64bit pref]
[ 0.571840] pci 0000:05:00.0: PCI bridge to [bus 06-0d]
[ 0.571844] pci 0000:05:00.0: bridge window [io 0x8000-0xafff]
[ 0.571853] pci 0000:05:00.0: bridge window [mem 0xe4800000-0xe62fffff]
[ 0.571860] pci 0000:05:00.0: bridge window [mem
0xc0000000-0xc8ffffff 64bit pref]
[ 0.571872] pci 0000:02:02.0: PCI bridge to [bus 05-0d]
[ 0.571874] pci 0000:02:02.0: bridge window [io 0x8000-0xafff]
[ 0.571880] pci 0000:02:02.0: bridge window [mem 0xe4800000-0xe62fffff]
[ 0.571884] pci 0000:02:02.0: bridge window [mem
0xc0000000-0xc8ffffff 64bit pref]
[ 0.571891] pci 0000:0f:04.0: PCI bridge to [bus 10]
[ 0.571896] pci 0000:0f:04.0: bridge window [io 0xd000-0xdfff]
[ 0.571906] pci 0000:0f:04.0: bridge window [mem 0xd8000000-0xe00fffff]
[ 0.571925] pci 0000:0e:00.0: PCI bridge to [bus 0f-10]
[ 0.571929] pci 0000:0e:00.0: bridge window [io 0xd000-0xdfff]
[ 0.571938] pci 0000:0e:00.0: bridge window [mem 0xd8000000-0xe00fffff]
[ 0.571954] pci 0000:02:03.0: PCI bridge to [bus 0e-10]
[ 0.571957] pci 0000:02:03.0: bridge window [io 0xd000-0xdfff]
[ 0.571962] pci 0000:02:03.0: bridge window [mem 0xd8000000-0xe00fffff]
[ 0.571972] pci 0000:11:00.0: PCI bridge to [bus 12]
[ 0.571976] pci 0000:11:00.0: bridge window [io 0xc000-0xcfff]
[ 0.571984] pci 0000:11:00.0: bridge window [mem 0xe6500000-0xe65fffff]
[ 0.572001] pci 0000:02:08.0: PCI bridge to [bus 11-12]
[ 0.572004] pci 0000:02:08.0: bridge window [io 0xc000-0xcfff]
[ 0.572009] pci 0000:02:08.0: bridge window [mem 0xe6500000-0xe65fffff]
[ 0.572018] pci 0000:02:09.0: PCI bridge to [bus 13]
[ 0.572021] pci 0000:02:09.0: bridge window [io 0xb000-0xbfff]
[ 0.572026] pci 0000:02:09.0: bridge window [mem 0xe6400000-0xe64fffff]
[ 0.572035] pci 0000:01:00.2: PCI bridge to [bus 02-13]
[ 0.572038] pci 0000:01:00.2: bridge window [io 0x8000-0xefff]
[ 0.572043] pci 0000:01:00.2: bridge window [mem 0xd8000000-0xe66fffff]
[ 0.572047] pci 0000:01:00.2: bridge window [mem
0xc0000000-0xc8ffffff 64bit pref]
[ 0.572054] pci 0000:00:01.1: PCI bridge to [bus 01-13]
[ 0.572056] pci 0000:00:01.1: bridge window [io 0x8000-0xefff]
[ 0.572060] pci 0000:00:01.1: bridge window [mem 0xd8000000-0xe67fffff]
[ 0.572063] pci 0000:00:01.1: bridge window [mem
0xc0000000-0xc8ffffff 64bit pref]
[ 0.572069] pci 0000:00:03.1: PCI bridge to [bus 14]
[ 0.572071] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.572075] pci 0000:00:03.1: bridge window [mem 0xe7000000-0xe90fffff]
[ 0.572078] pci 0000:00:03.1: bridge window [mem
0xb0000000-0xbfffffff 64bit pref]
[ 0.572083] pci 0000:00:07.1: PCI bridge to [bus 15]
[ 0.572090] pci 0000:00:08.1: PCI bridge to [bus 16]
[ 0.572094] pci 0000:00:08.1: bridge window [mem 0xe9200000-0xe94fffff]
[ 0.572100] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.572102] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.572104] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.572106] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.572108] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff
window]
[ 0.572110] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff
window]
[ 0.572112] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xefffffff
window]
[ 0.572114] pci_bus 0000:01: resource 0 [io 0x8000-0xefff]
[ 0.572116] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xe67fffff]
[ 0.572118] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc8ffffff
64bit pref]
[ 0.572120] pci_bus 0000:02: resource 0 [io 0x8000-0xefff]
[ 0.572122] pci_bus 0000:02: resource 1 [mem 0xd8000000-0xe66fffff]
[ 0.572124] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc8ffffff
64bit pref]
[ 0.572126] pci_bus 0000:03: resource 1 [mem 0xe2000000-0xe40fffff]
[ 0.572128] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.572130] pci_bus 0000:04: resource 1 [mem 0xe6600000-0xe66fffff]
[ 0.572132] pci_bus 0000:05: resource 0 [io 0x8000-0xafff]
[ 0.572134] pci_bus 0000:05: resource 1 [mem 0xe4800000-0xe62fffff]
[ 0.572135] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xc8ffffff
64bit pref]
[ 0.572138] pci_bus 0000:06: resource 0 [io 0x8000-0xafff]
[ 0.572139] pci_bus 0000:06: resource 1 [mem 0xe4800000-0xe62fffff]
[ 0.572141] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc8ffffff
64bit pref]
[ 0.572143] pci_bus 0000:07: resource 0 [io 0x8000-0xafff]
[ 0.572145] pci_bus 0000:07: resource 1 [mem 0xe4800000-0xe62fffff]
[ 0.572147] pci_bus 0000:07: resource 2 [mem 0xc0000000-0xc8ffffff
64bit pref]
[ 0.572149] pci_bus 0000:08: resource 1 [mem 0xe6100000-0xe61fffff]
[ 0.572151] pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc8ffffff
64bit pref]
[ 0.572153] pci_bus 0000:09: resource 0 [io 0x8000-0x9fff]
[ 0.572155] pci_bus 0000:09: resource 1 [mem 0xe5800000-0xe60fffff]
[ 0.572157] pci_bus 0000:09: resource 2 [mem 0xc0000000-0xc6ffffff
64bit pref]
[ 0.572159] pci_bus 0000:0a: resource 1 [mem 0xe5f00000-0xe5ffffff]
[ 0.572161] pci_bus 0000:0a: resource 2 [mem 0xc6000000-0xc6ffffff
64bit pref]
[ 0.572163] pci_bus 0000:0b: resource 1 [mem 0xe5e00000-0xe5efffff]
[ 0.572165] pci_bus 0000:0b: resource 2 [mem 0xc5000000-0xc5ffffff
64bit pref]
[ 0.572167] pci_bus 0000:0c: resource 1 [mem 0xe5d00000-0xe5dfffff]
[ 0.572169] pci_bus 0000:0c: resource 2 [mem 0xc4000000-0xc4ffffff
64bit pref]
[ 0.572171] pci_bus 0000:0d: resource 0 [io 0x8000-0x8fff]
[ 0.572173] pci_bus 0000:0d: resource 1 [mem 0xe5c00000-0xe5cfffff]
[ 0.572175] pci_bus 0000:0e: resource 0 [io 0xd000-0xdfff]
[ 0.572176] pci_bus 0000:0e: resource 1 [mem 0xd8000000-0xe00fffff]
[ 0.572178] pci_bus 0000:0f: resource 0 [io 0xd000-0xdfff]
[ 0.572180] pci_bus 0000:0f: resource 1 [mem 0xd8000000-0xe00fffff]
[ 0.572182] pci_bus 0000:10: resource 0 [io 0xd000-0xdfff]
[ 0.572184] pci_bus 0000:10: resource 1 [mem 0xd8000000-0xe00fffff]
[ 0.572186] pci_bus 0000:11: resource 0 [io 0xc000-0xcfff]
[ 0.572187] pci_bus 0000:11: resource 1 [mem 0xe6500000-0xe65fffff]
[ 0.572189] pci_bus 0000:12: resource 0 [io 0xc000-0xcfff]
[ 0.572191] pci_bus 0000:12: resource 1 [mem 0xe6500000-0xe65fffff]
[ 0.572193] pci_bus 0000:12: resource 4 [io 0xc000-0xcfff]
[ 0.572194] pci_bus 0000:12: resource 5 [mem 0xe6500000-0xe65fffff]
[ 0.572196] pci_bus 0000:13: resource 0 [io 0xb000-0xbfff]
[ 0.572198] pci_bus 0000:13: resource 1 [mem 0xe6400000-0xe64fffff]
[ 0.572200] pci_bus 0000:14: resource 0 [io 0xf000-0xffff]
[ 0.572202] pci_bus 0000:14: resource 1 [mem 0xe7000000-0xe90fffff]
[ 0.572203] pci_bus 0000:14: resource 2 [mem 0xb0000000-0xbfffffff
64bit pref]
[ 0.572206] pci_bus 0000:16: resource 1 [mem 0xe9200000-0xe94fffff]
[ 0.572362] pci 0000:05:00.0: TI XIO2000a quirk detected; secondary
bus fast back-to-back transfers disabled
[ 0.572451] pci 0000:0e:00.0: TI XIO2000a quirk detected; secondary
bus fast back-to-back transfers disabled
[ 0.572481] pci 0000:11:00.0: Disabling ASPM L0s/L1
[ 0.572503] pci 0000:14:00.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.572588] PCI: CLS 64 bytes, default 64
[ 0.572610] Trying to unpack rootfs image as initramfs...
[ 1.356751] Freeing initrd memory: 12064K
[ 1.356769] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters
supported
[ 1.356825] pci 0000:00:01.0: Adding to iommu group 0
[ 1.356836] pci 0000:00:01.1: Adding to iommu group 1
[ 1.356849] pci 0000:00:02.0: Adding to iommu group 2
[ 1.356863] pci 0000:00:03.0: Adding to iommu group 3
[ 1.356874] pci 0000:00:03.1: Adding to iommu group 4
[ 1.356887] pci 0000:00:04.0: Adding to iommu group 5
[ 1.356900] pci 0000:00:05.0: Adding to iommu group 6
[ 1.356918] pci 0000:00:07.0: Adding to iommu group 7
[ 1.356928] pci 0000:00:07.1: Adding to iommu group 8
[ 1.356943] pci 0000:00:08.0: Adding to iommu group 9
[ 1.356953] pci 0000:00:08.1: Adding to iommu group 10
[ 1.356971] pci 0000:00:14.0: Adding to iommu group 11
[ 1.356980] pci 0000:00:14.3: Adding to iommu group 11
[ 1.357025] pci 0000:00:18.0: Adding to iommu group 12
[ 1.357034] pci 0000:00:18.1: Adding to iommu group 12
[ 1.357043] pci 0000:00:18.2: Adding to iommu group 12
[ 1.357052] pci 0000:00:18.3: Adding to iommu group 12
[ 1.357061] pci 0000:00:18.4: Adding to iommu group 12
[ 1.357070] pci 0000:00:18.5: Adding to iommu group 12
[ 1.357079] pci 0000:00:18.6: Adding to iommu group 12
[ 1.357088] pci 0000:00:18.7: Adding to iommu group 12
[ 1.357112] pci 0000:01:00.0: Adding to iommu group 13
[ 1.357123] pci 0000:01:00.1: Adding to iommu group 13
[ 1.357133] pci 0000:01:00.2: Adding to iommu group 13
[ 1.357138] pci 0000:02:00.0: Adding to iommu group 13
[ 1.357142] pci 0000:02:01.0: Adding to iommu group 13
[ 1.357147] pci 0000:02:02.0: Adding to iommu group 13
[ 1.357152] pci 0000:02:03.0: Adding to iommu group 13
[ 1.357156] pci 0000:02:08.0: Adding to iommu group 13
[ 1.357160] pci 0000:02:09.0: Adding to iommu group 13
[ 1.357164] pci 0000:03:00.0: Adding to iommu group 13
[ 1.357169] pci 0000:04:00.0: Adding to iommu group 13
[ 1.357173] pci 0000:05:00.0: Adding to iommu group 13
[ 1.357177] pci 0000:06:04.0: Adding to iommu group 13
[ 1.357182] pci 0000:07:04.0: Adding to iommu group 13
[ 1.357187] pci 0000:07:05.0: Adding to iommu group 13
[ 1.357191] pci 0000:07:06.0: Adding to iommu group 13
[ 1.357194] pci 0000:07:07.0: Adding to iommu group 13
[ 1.357198] pci 0000:07:08.0: Adding to iommu group 13
[ 1.357202] pci 0000:07:09.0: Adding to iommu group 13
[ 1.357206] pci 0000:07:0c.0: Adding to iommu group 13
[ 1.357211] pci 0000:08:00.0: Adding to iommu group 13
[ 1.357215] pci 0000:09:04.0: Adding to iommu group 13
[ 1.357219] pci 0000:09:05.0: Adding to iommu group 13
[ 1.357223] pci 0000:09:06.0: Adding to iommu group 13
[ 1.357227] pci 0000:09:07.0: Adding to iommu group 13
[ 1.357231] pci 0000:09:08.0: Adding to iommu group 13
[ 1.357234] pci 0000:09:09.0: Adding to iommu group 13
[ 1.357238] pci 0000:09:0a.0: Adding to iommu group 13
[ 1.357243] pci 0000:0a:00.0: Adding to iommu group 13
[ 1.357247] pci 0000:0b:00.0: Adding to iommu group 13
[ 1.357252] pci 0000:0c:00.0: Adding to iommu group 13
[ 1.357256] pci 0000:0d:00.0: Adding to iommu group 13
[ 1.357260] pci 0000:0e:00.0: Adding to iommu group 13
[ 1.357265] pci 0000:0f:04.0: Adding to iommu group 13
[ 1.357269] pci 0000:10:04.0: Adding to iommu group 13
[ 1.357273] pci 0000:10:06.0: Adding to iommu group 13
[ 1.357277] pci 0000:10:08.0: Adding to iommu group 13
[ 1.357280] pci 0000:10:09.0: Adding to iommu group 13
[ 1.357285] pci 0000:10:0a.0: Adding to iommu group 13
[ 1.357289] pci 0000:11:00.0: Adding to iommu group 13
[ 1.357294] pci 0000:12:00.0: Adding to iommu group 13
[ 1.357298] pci 0000:13:00.0: Adding to iommu group 13
[ 1.357309] pci 0000:14:00.0: Adding to iommu group 14
[ 1.357320] pci 0000:15:00.0: Adding to iommu group 15
[ 1.357332] pci 0000:16:00.0: Adding to iommu group 16
[ 1.357344] pci 0000:16:00.1: Adding to iommu group 17
[ 1.357356] pci 0000:16:00.3: Adding to iommu group 18
[ 1.357367] pci 0000:16:00.4: Adding to iommu group 19
[ 1.360652] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 1.360657] pci 0000:00:00.2: AMD-Vi: Extended features
(0x58f77ef22294ade):
[ 1.360659] PPR X2APIC NX GT IA GA PC GA_vAPIC
[ 1.360662] AMD-Vi: Interrupt remapping enabled
[ 1.360663] AMD-Vi: Virtual APIC enabled
[ 1.360665] AMD-Vi: X2APIC enabled
[ 1.360756] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.361501] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters,
163840 ms ovfl timer
[ 1.361503] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 1.361508] amd_uncore: AMD NB counters detected
[ 1.361513] amd_uncore: AMD LLC counters detected
[ 1.361663] LVT offset 0 assigned for vector 0x400
[ 1.361746] perf: AMD IBS detected (0x000003ff)
[ 1.361752] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4
counters/bank).
[ 1.362140] Initialise system trusted keyrings
[ 1.362154] Key type blacklist registered
[ 1.362179] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[ 1.362829] zbud: loaded
[ 1.365690] Key type asymmetric registered
[ 1.365692] Asymmetric key parser 'x509' registered
[ 1.365698] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 249)
[ 1.365703] io scheduler mq-deadline registered
[ 1.365705] io scheduler kyber registered
[ 1.365718] io scheduler bfq registered
[ 1.367121] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.367144] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 1.367145] vesafb: scrolling: redraw
[ 1.367147] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.367161] vesafb: framebuffer at 0xb0000000, mapped to
0x00000000cb0f99e6, using 5120k, total 5120k
[ 1.367214] Console: switching to colour frame buffer device 160x64
[ 1.402507] fb0: VESA VGA frame buffer device
[ 1.403156] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.403561] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 1.404680] Non-volatile memory driver v1.3
[ 1.404883] Linux agpgart interface v0.103
[ 1.406233] ahci 0000:01:00.1: version 3.0
[ 1.406316] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[ 1.406662] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 6 ports 6 Gbps
0x3f impl SATA mode
[ 1.407017] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo
only pmp pio slum part sxs deso sadm sds apst
[ 1.407792] scsi host0: ahci
[ 1.408013] scsi host1: ahci
[ 1.408212] scsi host2: ahci
[ 1.408415] scsi host3: ahci
[ 1.408614] scsi host4: ahci
[ 1.408815] scsi host5: ahci
[ 1.408981] ata1: SATA max UDMA/133 abar m131072@0xe6780000 port
0xe6780100 irq 41
[ 1.409314] ata2: SATA max UDMA/133 abar m131072@0xe6780000 port
0xe6780180 irq 41
[ 1.409644] ata3: SATA max UDMA/133 abar m131072@0xe6780000 port
0xe6780200 irq 41
[ 1.409973] ata4: SATA max UDMA/133 abar m131072@0xe6780000 port
0xe6780280 irq 41
[ 1.410301] ata5: SATA max UDMA/133 abar m131072@0xe6780000 port
0xe6780300 irq 41
[ 1.410628] ata6: SATA max UDMA/133 abar m131072@0xe6780000 port
0xe6780380 irq 41
[ 1.421166] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps
0xf impl SATA mode
[ 1.421518] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs
pio slum part sxs
[ 1.422122] scsi host6: ahci
[ 1.422329] scsi host7: ahci
[ 1.422532] scsi host8: ahci
[ 1.422736] scsi host9: ahci
[ 1.422901] ata7: SATA max UDMA/133 abar m2048@0xe6610000 port
0xe6610100 irq 42
[ 1.423225] ata8: SATA max UDMA/133 abar m2048@0xe6610000 port
0xe6610180 irq 42
[ 1.423552] ata9: SATA max UDMA/133 abar m2048@0xe6610000 port
0xe6610200 irq 42
[ 1.423876] ata10: SATA max UDMA/133 abar m2048@0xe6610000 port
0xe6610280 irq 42
[ 1.424250] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.424550] i8042: PNP: PS/2 appears to have AUX port disabled, if
this is incorrect please boot with i8042.nopnp
[ 1.425109] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.425386] mousedev: PS/2 mouse device common for all mice
[ 1.425672] rtc_cmos 00:02: RTC can wake from S4
[ 1.426024] rtc_cmos 00:02: registered as rtc0
[ 1.426255] rtc_cmos 00:02: setting system clock to
2020-11-25T21:01:00 UTC (1606338060)
[ 1.426615] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes
nvram, hpet irqs
[ 1.427049] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.436858] hid: raw HID events driver (C) Jiri Kosina
[ 1.446752] drop_monitor: Initializing network drop monitor service
[ 1.456793] NET: Registered protocol family 10
[ 1.469254] Segment Routing with IPv6
[ 1.479839] microcode: CPU0: patch_level=0x08701021
[ 1.485489] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.489654] microcode: CPU1: patch_level=0x08701021
[ 1.509899] microcode: CPU2: patch_level=0x08701021
[ 1.519884] microcode: CPU3: patch_level=0x08701021
[ 1.529693] microcode: CPU4: patch_level=0x08701021
[ 1.539410] microcode: CPU5: patch_level=0x08701021
[ 1.549021] microcode: CPU6: patch_level=0x08701021
[ 1.558475] microcode: CPU7: patch_level=0x08701021
[ 1.567728] microcode: CPU8: patch_level=0x08701021
[ 1.576832] microcode: CPU9: patch_level=0x08701021
[ 1.585881] microcode: CPU10: patch_level=0x08701021
[ 1.594992] microcode: CPU11: patch_level=0x08701021
[ 1.603936] microcode: CPU12: patch_level=0x08701021
[ 1.612680] microcode: CPU13: patch_level=0x08701021
[ 1.621226] microcode: CPU14: patch_level=0x08701021
[ 1.629643] microcode: CPU15: patch_level=0x08701021
[ 1.637968] microcode: Microcode Update Driver: v2.2.
[ 1.637971] IPI shorthand broadcast: enabled
[ 1.654368] sched_clock: Marking stable (1334868715,
319493605)->(1671598226, -17235906)
[ 1.662705] registered taskstats version 1
[ 1.670900] Loading compiled-in X.509 certificates
[ 1.679089] zswap: loaded using pool lzo/zbud
[ 1.687264] Key type ._fscrypt registered
[ 1.695241] Key type .fscrypt registered
[ 1.703180] Key type fscrypt-provisioning registered
[ 1.712252] Key type encrypted registered
[ 1.720030] ima: No TPM chip found, activating TPM-bypass!
[ 1.727392] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.727759] ima: Allocated hash algorithm: sha256
[ 1.735391] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.743099] ima: No architecture policies found
[ 1.751052] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.759061] evm: Initialising EVM extended attributes:
[ 1.767302] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.775642] evm: security.selinux
[ 1.792376] evm: security.ima
[ 1.800787] evm: security.capability
[ 1.809259] evm: HMAC attrs: 0x1
[ 1.818091] PM: Magic number: 12:101:46
[ 1.826744] event_source uprobe: hash matches
[ 1.835315] RAS: Correctable Errors collector initialized.
[ 1.874311] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.883109] ata1.00: supports DRM functions and may not be fully
accessible
[ 1.892438] ata1.00: disabling queued TRIM support
[ 1.892439] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT03B6Q, max
UDMA/133
[ 1.901404] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.912127] ata1.00: supports DRM functions and may not be fully
accessible
[ 1.921755] ata1.00: disabling queued TRIM support
[ 1.923056] ata1.00: configured for UDMA/133
[ 1.932321] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850
3B6Q PQ: 0 ANSI: 5
[ 1.941964] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/466 GiB)
[ 1.951489] sd 0:0:0:0: [sda] Write Protect is off
[ 1.960848] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.960855] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.971166] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.981066] sd 0:0:0:0: [sda] supports TCG Opal
[ 1.990292] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.378303] tsc: Refined TSC clocksource calibration: 3892.685 MHz
[ 2.387673] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x7038b8db878, max_idle_ns: 881590710692 ns
[ 2.397305] clocksource: Switched to clocksource tsc
[ 2.402313] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.416598] ata2.00: supports DRM functions and may not be fully
accessible
[ 2.426983] ata2.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT02B6Q, max
UDMA/133
[ 2.436581] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth
32), AA
[ 2.448417] ata2.00: supports DRM functions and may not be fully
accessible
[ 2.460750] ata2.00: configured for UDMA/133
[ 2.470412] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860
2B6Q PQ: 0 ANSI: 5
[ 2.480132] ata2.00: Enabling discard_zeroes_data
[ 2.489599] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks:
(1.00 TB/932 GiB)
[ 2.499373] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.509194] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.509199] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.519464] ata2.00: Enabling discard_zeroes_data
[ 2.531193] sdb: sdb1
[ 2.541677] ata2.00: Enabling discard_zeroes_data
[ 2.553196] sd 1:0:0:0: [sdb] supports TCG Opal
[ 2.563783] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.799366] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.274311] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.286770] ata4.00: ATAPI: SONY DVD RW AD-7260S, 1.61, max UDMA/100
[ 3.299642] ata4.00: configured for UDMA/100
[ 3.312379] scsi 3:0:0:0: CD-ROM SONY DVD RW AD-7260S
1.61 PQ: 0 ANSI: 5
[ 3.810311] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.823584] ata5.00: supports DRM functions and may not be fully
accessible
[ 3.835923] ata5.00: disabling queued TRIM support
[ 3.835924] ata5.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max
UDMA/133
[ 3.847738] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 3.860978] ata5.00: supports DRM functions and may not be fully
accessible
[ 3.873139] ata5.00: disabling queued TRIM support
[ 3.874410] ata5.00: configured for UDMA/133
[ 3.886054] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 850
2B6Q PQ: 0 ANSI: 5
[ 3.897985] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500
GB/466 GiB)
[ 3.909917] sd 4:0:0:0: [sdc] Write Protect is off
[ 3.921835] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.921840] sd 4:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.934315] sdc: sdc1
[ 3.946849] sd 4:0:0:0: [sdc] supports TCG Opal
[ 3.958965] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 4.362311] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.375938] ata6.00: supports DRM functions and may not be fully
accessible
[ 4.388660] ata6.00: disabling queued TRIM support
[ 4.388660] ata6.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max
UDMA/133
[ 4.400887] ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 4.414647] ata6.00: supports DRM functions and may not be fully
accessible
[ 4.427418] ata6.00: disabling queued TRIM support
[ 4.428691] ata6.00: configured for UDMA/133
[ 4.440909] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850
2B6Q PQ: 0 ANSI: 5
[ 4.453378] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500
GB/466 GiB)
[ 4.465939] sd 5:0:0:0: [sdd] Write Protect is off
[ 4.478513] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.478518] sd 5:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.493060] sdd: sdd1
[ 4.506322] sd 5:0:0:0: [sdd] supports TCG Opal
[ 4.519171] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 4.532921] Freeing unused decrypted memory: 2040K
[ 4.545844] Freeing unused kernel image (initmem) memory: 1640K
[ 4.562305] Write protecting the kernel read-only data: 18432k
[ 4.575283] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 4.588000] Freeing unused kernel image (rodata/data gap) memory: 56K
[ 4.600546] Run /init as init process
[ 4.612993] with arguments:
[ 4.612994] /init
[ 4.612994] showopts
[ 4.612994] with environment:
[ 4.612995] HOME=/
[ 4.612995] TERM=linux
[ 4.612995] BOOT_IMAGE=/boot/vmlinuz-5.9.0-rc1+
[ 4.612996] apm=off
[ 4.612996] splash=verbose
[ 4.630405] systemd[1]: systemd 234 running in system mode. (+PAM
-AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN
default-hierarchy=hybrid)
[ 4.668327] systemd[1]: Detected architecture x86-64.
[ 4.681448] systemd[1]: Running in initial RAM disk.
[ 4.733347] systemd[1]: Set hostname to <harley>.
[ 4.767596] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.780958] systemd[1]: Created slice System Slice.
[ 4.806979] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.820079] systemd[1]: Listening on udev Kernel Socket.
[ 4.845902] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.859069] systemd[1]: Reached target Slices.
[ 4.885076] systemd[1]: Reached target Swap.
[ 4.910814] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.936772] systemd[1]: Listening on udev Control Socket.
[ 5.065916] alua: device handler registered
[ 5.066049] emc: device handler registered
[ 5.066175] rdac: device handler registered
[ 5.067526] device-mapper: uevent: version 1.0.3
[ 5.067568] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27)
initialised: dm-devel@redhat.com
[ 5.068392] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.068411] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 5.068429] scsi 3:0:0:0: Attached scsi generic sg2 type 5
[ 5.068446] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 5.068462] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 5.163885] random: crng init done
[ 5.218016] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.522938] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 5.535255] ACPI: Power Button [PWRB]
[ 5.535537] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.563333] ACPI: Power Button [PWRF]
[ 5.566760] ACPI: bus type USB registered
[ 5.566787] usbcore: registered new interface driver usbfs
[ 5.566797] usbcore: registered new interface driver hub
[ 5.566860] usbcore: registered new device driver usb
[ 5.570383] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 5.570388] xhci_hcd 0000:01:00.0: new USB bus registered, assigned
bus number 1
[ 5.587666] scsi host10: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA
DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7,
3/253 SCBs
[ 5.611882] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram
cd/rw xa/form2 cdda tray
[ 5.625399] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version
0x110 quirks 0x0000000000000410
[ 5.629001] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.640381] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.09
[ 5.696332] checking generic (b0000000 500000) vs hw (e8000000 1000000)
[ 5.707356] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.718728] checking generic (b0000000 500000) vs hw (b0000000 10000000)
[ 5.718729] fb0: switching to nouveaufb from VESA VGA
[ 5.764575] usb usb1: Product: xHCI Host Controller
[ 5.764576] usb usb1: Manufacturer: Linux 5.9.0-rc1+ xhci-hcd
[ 5.764576] usb usb1: SerialNumber: 0000:01:00.0
[ 5.764654] hub 1-0:1.0: USB hub found
[ 5.771415] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 5.809634] hub 1-0:1.0: 10 ports detected
[ 5.809653] Console: switching to colour dummy device 80x25
[ 5.809699] nouveau 0000:14:00.0: vgaarb: deactivate vga console
[ 5.809768] nouveau 0000:14:00.0: NVIDIA G70 (047200a1)
[ 5.810020] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 5.810025] xhci_hcd 0000:01:00.0: new USB bus registered, assigned
bus number 2
[ 5.810029] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced
SuperSpeed
[ 5.810069] usb usb2: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 5.810081] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0003, bcdDevice= 5.09
[ 5.810084] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.810086] usb usb2: Product: xHCI Host Controller
[ 5.810088] usb usb2: Manufacturer: Linux 5.9.0-rc1+ xhci-hcd
[ 5.810089] usb usb2: SerialNumber: 0000:01:00.0
[ 5.810147] hub 2-0:1.0: USB hub found
[ 5.810155] hub 2-0:1.0: 4 ports detected
[ 5.810207] usb: port power management may be unreliable
[ 5.810341] xhci_hcd 0000:16:00.3: xHCI Host Controller
[ 5.810345] xhci_hcd 0000:16:00.3: new USB bus registered, assigned
bus number 3
[ 5.810440] xhci_hcd 0000:16:00.3: hcc params 0x0278ffe5 hci version
0x110 quirks 0x0000000000000410
[ 5.810674] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.09
[ 5.810677] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.810679] usb usb3: Product: xHCI Host Controller
[ 5.810681] usb usb3: Manufacturer: Linux 5.9.0-rc1+ xhci-hcd
[ 5.810683] usb usb3: SerialNumber: 0000:16:00.3
[ 5.810733] hub 3-0:1.0: USB hub found
[ 5.810738] hub 3-0:1.0: 4 ports detected
[ 5.810865] xhci_hcd 0000:16:00.3: xHCI Host Controller
[ 5.810868] xhci_hcd 0000:16:00.3: new USB bus registered, assigned
bus number 4
[ 5.810871] xhci_hcd 0000:16:00.3: Host supports USB 3.1 Enhanced
SuperSpeed
[ 5.810880] usb usb4: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 5.810892] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0003, bcdDevice= 5.09
[ 5.810894] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.810896] usb usb4: Product: xHCI Host Controller
[ 5.810898] usb usb4: Manufacturer: Linux 5.9.0-rc1+ xhci-hcd
[ 5.810900] usb usb4: SerialNumber: 0000:16:00.3
[ 5.810944] hub 4-0:1.0: USB hub found
[ 5.810950] hub 4-0:1.0: 4 ports detected
[ 5.882482] (scsi10:A:1:0): refuses synchronous negotiation. Using
asynchronous transfers
[ 5.887369] scsi 10:0:1:0: Sequential-Access HP 88780
A674 PQ: 0 ANSI: 1 CCS
[ 5.894685] scsi target10:0:1: Beginning Domain Validation
[ 5.913118] scsi target10:0:1: Ending Domain Validation
[ 5.913214] scsi 10:0:1:0: Attached scsi generic sg5 type 1
[ 5.928311] EXT4-fs (sda7): mounted filesystem with ordered data
mode. Opts: (null)
[ 6.010730] nouveau 0000:14:00.0: bios: version 05.70.02.13.7b
[ 6.011017] nouveau 0000:14:00.0: fb: 256 MiB GDDR3
[ 6.065115] [TTM] Zone kernel: Available graphics memory: 8201096 KiB
[ 6.065119] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 6.065121] [TTM] Initializing pool allocator
[ 6.065124] [TTM] Initializing DMA pool allocator
[ 6.065136] nouveau 0000:14:00.0: DRM: VRAM: 250 MiB
[ 6.065138] nouveau 0000:14:00.0: DRM: GART: 512 MiB
[ 6.065142] nouveau 0000:14:00.0: DRM: TMDS table version 1.1
[ 6.065144] nouveau 0000:14:00.0: DRM: DCB version 3.0
[ 6.065146] nouveau 0000:14:00.0: DRM: DCB outp 00: 01000300 00000028
[ 6.065148] nouveau 0000:14:00.0: DRM: DCB outp 01: 03000302 00000000
[ 6.065150] nouveau 0000:14:00.0: DRM: DCB outp 02: 04011310 00000028
[ 6.065152] nouveau 0000:14:00.0: DRM: DCB outp 03: 04011312 00000000
[ 6.065154] nouveau 0000:14:00.0: DRM: DCB outp 04: 020223f1 0040c080
[ 6.065156] nouveau 0000:14:00.0: DRM: DCB conn 00: 1030
[ 6.065158] nouveau 0000:14:00.0: DRM: DCB conn 01: 2130
[ 6.065160] nouveau 0000:14:00.0: DRM: DCB conn 02: 0210
[ 6.065162] nouveau 0000:14:00.0: DRM: DCB conn 03: 0211
[ 6.065164] nouveau 0000:14:00.0: DRM: DCB conn 04: 0213
[ 6.070068] nouveau 0000:14:00.0: DRM: Setting dpms mode 3 on TV
encoder (output 4)
[ 6.152318] nouveau 0000:14:00.0: DRM: failed to map fb: -28
[ 6.152421] [drm] Initialized nouveau 1.3.1 20120801 for 0000:14:00.0
on minor 0
[ 6.194306] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[ 6.596689] usb 1-6: New USB device found, idVendor=12cf,
idProduct=0155, bcdDevice=12.02
[ 6.596693] usb 1-6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 6.596695] usb 1-6: Product: CM STORM SENTINEL GAMING MOUSE
[ 6.596697] usb 1-6: Manufacturer: DEXIN Corporation
[ 7.043115] scsi 10:0:6:0: Sequential-Access EXABYTE
EXB-8500-85Qanx0 0446 PQ: 0 ANSI: 2
[ 7.050302] scsi target10:0:6: Beginning Domain Validation
[ 7.257295] scsi target10:0:6: FAST-5 SCSI 4.0 MB/s ST (248 ns,
offset 11)
[ 7.296468] scsi target10:0:6: Domain Validation skipping write tests
[ 7.296470] scsi target10:0:6: Ending Domain Validation
[ 7.296553] scsi 10:0:6:0: Attached scsi generic sg6 type 1
[ 7.339671] scsi host11: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA
DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7,
3/253 SCBs
[ 9.239438] systemd-journald[288]: Received SIGTERM from PID 1 (systemd).
[ 9.252923] printk: systemd: 15 output lines suppressed due to
ratelimiting
[ 9.324019] systemd-fstab-generator[517]: Checking was requested for
"qnap.compro.net:/HUB", but it is not a device.
[ 9.324053] systemd-fstab-generator[517]: Checking was requested for
"qnap2.compro.net:/NFS", but it is not a device.
[ 9.455844] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 9.472597] systemd-journald[532]: Received request to flush runtime
journal from PID 1
[ 9.535098] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready
0x00000000
[ 9.535496] snd_hda_codec_realtek hdaudioC0D0: autoconfig for
ALC1150: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 9.535499] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 9.535501] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
[ 9.535504] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.535505] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 9.535507] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.535509] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 9.535511] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 9.535513] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 9.546834] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input3
[ 9.546872] input: HD-Audio Generic Front Mic as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input4
[ 9.546903] input: HD-Audio Generic Rear Mic as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input5
[ 9.546932] input: HD-Audio Generic Line as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input6
[ 9.546960] input: HD-Audio Generic Line Out as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input7
[ 9.546989] input: HD-Audio Generic Front Headphone as
/devices/pci0000:00/0000:00:08.1/0000:16:00.4/sound/card0/input8
[ 9.563494] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.563500] ACPI: Thermal Zone [THRM] (37 C)
[ 9.592055] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 9.592063] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus
port selection
[ 9.592219] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller
at 0xb20
[ 9.612519] hdlc: HDLC support module revision 1.22
[ 9.613559] ccp 0000:16:00.1: ccp: unable to access the device: you
might be running a broken BIOS.
[ 9.615163] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 9.617566] PCI parallel port detected: 9710:9805, I/O at
0xd150(0xd140), IRQ 32
[ 9.617771] parport0: PC-style at 0xd150 (0xd140), irq 32
[ 9.619276] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 9.619465] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO
address
[ 9.619478] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 9.619745] SyncLink GT
[ 9.619756] SyncLink GT, tty major#245
[ 9.619824] SyncLink GT4 ttySLG0 IO=e000c000 IRQ=37 MaxFrameSize=4096
[ 9.620253] SyncLink GT4 ttySLG1 IO=e000c000 IRQ=37 MaxFrameSize=4096
[ 9.620729] SyncLink GT4 ttySLG2 IO=e000c000 IRQ=37 MaxFrameSize=4096
[ 9.620967] SyncLink GT4 ttySLG3 IO=e000c000 IRQ=37 MaxFrameSize=4096
[ 9.622555] , using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[ 9.631661] 3c59x: Donald Becker and others.
[ 9.631676] 0000:07:04.0: 3Com PCI 3c905C Tornado at 0000000079cabc9d.
[ 9.631950] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 9.633062] st 10:0:1:0: Attached scsi tape st0
[ 9.633067] st 10:0:1:0: st0: try direct i/o: yes (alignment 4 B)
[ 9.633694] st 10:0:6:0: Attached scsi tape st1
[ 9.633699] st 10:0:6:0: st1: try direct i/o: yes (alignment 4 B)
[ 9.634534] cryptd: max_cpu_qlen set to 1000
[ 9.644991] AVX2 version of gcm_enc/dec engaged.
[ 9.644997] AES CTR mode by8 optimization enabled
[ 9.645750] r8169 0000:13:00.0: can't disable ASPM; OS doesn't have
ASPM control
[ 9.654639] libphy: r8169: probed
[ 9.654918] r8169 0000:13:00.0 eth0: RTL8125B, f4:b5:20:2a:e0:d3, XID
641, IRQ 60
[ 9.654924] r8169 0000:13:00.0 eth0: jumbo features [frames: 9194
bytes, tx checksumming: ko]
[ 9.663043] ppdev: user-space parallel port driver
[ 9.677521] usbcore: registered new interface driver usbhid
[ 9.677532] usbhid: USB HID core driver
[ 9.687043] input: DEXIN Corporation CM STORM SENTINEL GAMING MOUSE
as
/devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-6/1-6:1.0/0003:12CF:0155.0001/input/input10
[ 9.687256] hid-generic 0003:12CF:0155.0001: input,hidraw0: USB HID
v1.11 Mouse [DEXIN Corporation CM STORM SENTINEL GAMING MOUSE] on
usb-0000:01:00.0-6/input0
[ 9.687504] input: DEXIN Corporation CM STORM SENTINEL GAMING MOUSE
Keyboard as
/devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-6/1-6:1.1/0003:12CF:0155.0002/input/input11
[ 9.687707] input: DEXIN Corporation CM STORM SENTINEL GAMING MOUSE
Consumer Control as
/devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-6/1-6:1.1/0003:12CF:0155.0002/input/input12
[ 9.687858] hid-generic 0003:12CF:0155.0002: input,hidraw1: USB HID
v1.11 Keyboard [DEXIN Corporation CM STORM SENTINEL GAMING MOUSE] on
usb-0000:01:00.0-6/input1
[ 9.735611] kvm: disabled by bios
[ 9.762616] kvm: disabled by bios
[ 9.778311] Adding 8385532k swap on /dev/sda2. Priority:-2 extents:1
across:8385532k SSFS
[ 9.803413] kvm: disabled by bios
[ 9.815669] EXT4-fs (sdc1): mounted filesystem with ordered data
mode. Opts: acl,user_xattr
[ 9.819430] EXT4-fs (sdd1): mounted filesystem with ordered data
mode. Opts: acl,user_xattr
[ 9.828886] EXT4-fs (sda5): mounted filesystem with ordered data
mode. Opts: (null)
[ 9.831978] EXT4-fs (sdb1): mounted filesystem with ordered data
mode. Opts: acl,user_xattr
[ 9.833545] EXT4-fs (sda6): mounted filesystem with ordered data
mode. Opts: (null)
[ 9.843561] kvm: disabled by bios
[ 9.896674] kvm: disabled by bios
[ 9.931398] kvm: disabled by bios
[ 9.967276] kvm: disabled by bios
[ 10.003355] kvm: disabled by bios
[ 10.055291] kvm: disabled by bios
[ 10.087297] kvm: disabled by bios
[ 10.432706] No iBFT detected.
[ 10.448254] r8169 0000:13:00.0: Direct firmware load for
rtl_nic/rtl8125b-2.fw failed with error -2
[ 10.448256] r8169 0000:13:00.0: Unable to load firmware
rtl_nic/rtl8125b-2.fw (-2)
[ 10.470316] RTL8125B 2.5Gbps internal r8169-1300:00: attached PHY
driver [RTL8125B 2.5Gbps internal] (mii_bus:phy_addr=r8169-1300:00,
irq=IGNORE)
[ 10.581693] r8169 0000:13:00.0 eth0: Link is Down
[ 10.582148] eth1: setting full-duplex.
[ 10.614787] NET: Registered protocol family 17
[ 13.196790] r8169 0000:13:00.0 eth0: Link is Up - 1Gbps/Full - flow
control rx/tx
[ 13.196799] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.682815] FS-Cache: Loaded
[ 15.728136] RPC: Registered named UNIX socket transport module.
[ 15.728137] RPC: Registered udp transport module.
[ 15.728138] RPC: Registered tcp transport module.
[ 15.728138] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.787908] FS-Cache: Netfs 'nfs' registered for caching
[ 15.790826] Key type dns_resolver registered
[ 15.939387] NFS: Registering the id_resolver key type
[ 15.939397] Key type id_resolver registered
[ 15.939398] Key type id_legacy registered
[ 15.958323] NFS4: Couldn't follow remote path
[ 15.959837] NFS4: Couldn't follow remote path
[ 15.963245] NFS4: Couldn't follow remote path
[ 15.964579] NFS4: Couldn't follow remote path
[ 16.058955] systemd-fstab-generator[1592]: Checking was requested for
"qnap.compro.net:/HUB", but it is not a device.
[ 16.058975] systemd-fstab-generator[1592]: Checking was requested for
"qnap2.compro.net:/NFS", but it is not a device.
[ 2656.706038] fuse: init (API version 7.31)
Mark
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG][NOUVEAU] G70 broken since 5.10-rc1
[not found] ` <aa4e3741-b1b2-4ae2-6b35-880b40c985c8-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2020-11-26 12:05 ` Christian König
[not found] ` <3f22c4f6-83fd-ef11-ba1d-bc85d6a0d557@cfl.rr.com>
0 siblings, 1 reply; 8+ messages in thread
From: Christian König @ 2020-11-26 12:05 UTC (permalink / raw)
To: markh-n2QNKt385d+sTnJN9+BGXg, nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
Cc: Mark Hounschell
Hi Mark,
Am 26.11.20 um 10:59 schrieb Mark Hounschell:
> On 11/26/20 3:35 AM, Christian König wrote:
>>> I'm running an older "NVIDIA Corporation G70 [GeForce 7800 GT] (rev
>>> a1)" card in a newer BIOSTAR B550GTA MB. Kernel 5.10-rcx does not
>>> work. I get no virtual consoles or X screen.
thanks for the dmesg.
Problem is I don't have the slightest idea what's going wrong here :)
The code should be functional identical, it was just moved from TTM to
nouveau, so we are missing some detail in the handling.
Can you run the following test for me: First you need to disable loading
of the nouveau kernel module by adding modprobe.blacklist=nouveau to the
kernel command line.
Then log into the system over the network and run the following commands:
sudo modprobe ttm
sudo bash -c "echo 'ttm_bo_kmap' >
/sys/kernel/debug/tracing/set_graph_function"
sudo bash -c "echo function_graph >
/sys/kernel/debug/tracing/current_tracer"
sudo modprobe nouveau
sudo bash -c "cat /sys/kernel/debug/tracing/trace" > trace.log
Please then send me the resulting trace.log file so that I can
investigate why mapping the framebuffer fails during driver load.
Thanks in advance,
Christian.
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG][NOUVEAU] G70 broken since 5.10-rc1
[not found] ` <3f22c4f6-83fd-ef11-ba1d-bc85d6a0d557-3tLf1voIkJTQT0dZR+AlfA@public.gmane.org>
@ 2020-11-26 12:41 ` Christian König
[not found] ` <47ab20f6-dc56-8ade-29b6-f8fc684628d3-5C7GfCeVMHo@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Christian König @ 2020-11-26 12:41 UTC (permalink / raw)
To: dmarkh-3tLf1voIkJTQT0dZR+AlfA, markh-n2QNKt385d+sTnJN9+BGXg,
nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1: Type: text/plain, Size: 1804 bytes --]
Hi Mark,
Am 26.11.20 um 13:26 schrieb Mark Hounschell:
> On 11/26/20 7:05 AM, Christian König wrote:
>> Hi Mark,
>>
>> Am 26.11.20 um 10:59 schrieb Mark Hounschell:
>>> On 11/26/20 3:35 AM, Christian König wrote:
>>>>> I'm running an older "NVIDIA Corporation G70 [GeForce 7800 GT]
>>>>> (rev a1)" card in a newer BIOSTAR B550GTA MB. Kernel 5.10-rcx does
>>>>> not work. I get no virtual consoles or X screen.
>>
>> thanks for the dmesg.
>>
>> Problem is I don't have the slightest idea what's going wrong here :)
>>
>> The code should be functional identical, it was just moved from TTM
>> to nouveau, so we are missing some detail in the handling.
>>
>> Can you run the following test for me: First you need to disable
>> loading of the nouveau kernel module by adding
>> modprobe.blacklist=nouveau to the kernel command line.
>>
>> Then log into the system over the network and run the following
>> commands:
>>
>> sudo modprobe ttm
>> sudo bash -c "echo 'ttm_bo_kmap' >
>> /sys/kernel/debug/tracing/set_graph_function"
>> sudo bash -c "echo function_graph >
>> /sys/kernel/debug/tracing/current_tracer"
>> sudo modprobe nouveau
>> sudo bash -c "cat /sys/kernel/debug/tracing/trace" > trace.log
>>
>> Please then send me the resulting trace.log file so that I can
>> investigate why mapping the framebuffer fails during driver load.
>>
>> Thanks in advance,
>> Christian.
>
> I hope this is what you need. I do normally turn off a lot of debug
> features. Let me know if I need to change the kernel config.
It was not what I had expected but it pointed me in the right direction.
I think I've found the problem, it's just an uninitialized return value
for your hardware generation.
Please try the attached patch and let me know if it fixes the problem.
Thanks in advance,
Christian.
[-- Attachment #2: 0001-drm-nouveau-make-sure-ret-is-initialized-in-nouveau_.patch --]
[-- Type: text/x-patch, Size: 1041 bytes --]
From 293d608f04f7be857739a7403adaf044dd6ef80a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Christian=20K=C3=B6nig?= <christian.koenig-5C7GfCeVMHo@public.gmane.org>
Date: Thu, 26 Nov 2020 13:35:08 +0100
Subject: [PATCH] drm/nouveau: make sure ret is initialized in
nouveau_ttm_io_mem_reserve
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This wasn't initialized for pre NV50 hardware.
Signed-off-by: Christian König <christian.koenig-5C7GfCeVMHo@public.gmane.org>
---
drivers/gpu/drm/nouveau/nouveau_bo.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 7aa4286784ae..42292b3a6eb9 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -1135,8 +1135,8 @@ nouveau_ttm_io_mem_reserve(struct ttm_bo_device *bdev, struct ttm_resource *reg)
}
reg->bus.offset = handle;
- ret = 0;
}
+ ret = 0;
break;
default:
ret = -EINVAL;
--
2.25.1
[-- Attachment #3: Type: text/plain, Size: 182 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [BUG][NOUVEAU] G70 broken since 5.10-rc1
[not found] ` <47ab20f6-dc56-8ade-29b6-f8fc684628d3-5C7GfCeVMHo@public.gmane.org>
@ 2020-11-26 12:57 ` Mark Hounschell
[not found] ` <1d85e515-4d9c-30ec-c69b-217dacc1fa51-3tLf1voIkJTQT0dZR+AlfA@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Mark Hounschell @ 2020-11-26 12:57 UTC (permalink / raw)
To: Christian König, markh-n2QNKt385d+sTnJN9+BGXg,
nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
On 11/26/20 7:41 AM, Christian König wrote:
> Hi Mark,
>
> Am 26.11.20 um 13:26 schrieb Mark Hounschell:
>> On 11/26/20 7:05 AM, Christian König wrote:
>>> Hi Mark,
>>>
>>> Am 26.11.20 um 10:59 schrieb Mark Hounschell:
>>>> On 11/26/20 3:35 AM, Christian König wrote:
>>>>>> I'm running an older "NVIDIA Corporation G70 [GeForce 7800 GT] (rev
>>>>>> a1)" card in a newer BIOSTAR B550GTA MB. Kernel 5.10-rcx does not
>>>>>> work. I get no virtual consoles or X screen.
>>>
>>> thanks for the dmesg.
>>>
>>> Problem is I don't have the slightest idea what's going wrong here :)
>>>
>>> The code should be functional identical, it was just moved from TTM to
>>> nouveau, so we are missing some detail in the handling.
>>>
>>> Can you run the following test for me: First you need to disable loading
>>> of the nouveau kernel module by adding modprobe.blacklist=nouveau to the
>>> kernel command line.
>>>
>>> Then log into the system over the network and run the following commands:
>>>
>>> sudo modprobe ttm
>>> sudo bash -c "echo 'ttm_bo_kmap' >
>>> /sys/kernel/debug/tracing/set_graph_function"
>>> sudo bash -c "echo function_graph >
>>> /sys/kernel/debug/tracing/current_tracer"
>>> sudo modprobe nouveau
>>> sudo bash -c "cat /sys/kernel/debug/tracing/trace" > trace.log
>>>
>>> Please then send me the resulting trace.log file so that I can
>>> investigate why mapping the framebuffer fails during driver load.
>>>
>>> Thanks in advance,
>>> Christian.
>>
>> I hope this is what you need. I do normally turn off a lot of debug
>> features. Let me know if I need to change the kernel config.
>
> It was not what I had expected but it pointed me in the right direction. I
> think I've found the problem, it's just an uninitialized return value for
> your hardware generation.
>
> Please try the attached patch and let me know if it fixes the problem.
>
> Thanks in advance,
> Christian.
Yep, that fixed it. -rc6?
Thanks
Mark
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG][NOUVEAU] G70 broken since 5.10-rc1
[not found] ` <1d85e515-4d9c-30ec-c69b-217dacc1fa51-3tLf1voIkJTQT0dZR+AlfA@public.gmane.org>
@ 2020-11-26 13:01 ` Christian König
[not found] ` <22bdd617-abda-6014-55d9-1677066641ca-5C7GfCeVMHo@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Christian König @ 2020-11-26 13:01 UTC (permalink / raw)
To: dmarkh-3tLf1voIkJTQT0dZR+AlfA, markh-n2QNKt385d+sTnJN9+BGXg,
nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
Am 26.11.20 um 13:57 schrieb Mark Hounschell:
> On 11/26/20 7:41 AM, Christian König wrote:
>> Hi Mark,
>>
>> Am 26.11.20 um 13:26 schrieb Mark Hounschell:
>>> On 11/26/20 7:05 AM, Christian König wrote:
>>>> Hi Mark,
>>>>
>>>> Am 26.11.20 um 10:59 schrieb Mark Hounschell:
>>>>> On 11/26/20 3:35 AM, Christian König wrote:
>>>>>>> I'm running an older "NVIDIA Corporation G70 [GeForce 7800 GT]
>>>>>>> (rev a1)" card in a newer BIOSTAR B550GTA MB. Kernel 5.10-rcx
>>>>>>> does not work. I get no virtual consoles or X screen.
>>>>
>>>> thanks for the dmesg.
>>>>
>>>> Problem is I don't have the slightest idea what's going wrong here :)
>>>>
>>>> The code should be functional identical, it was just moved from TTM
>>>> to nouveau, so we are missing some detail in the handling.
>>>>
>>>> Can you run the following test for me: First you need to disable
>>>> loading of the nouveau kernel module by adding
>>>> modprobe.blacklist=nouveau to the kernel command line.
>>>>
>>>> Then log into the system over the network and run the following
>>>> commands:
>>>>
>>>> sudo modprobe ttm
>>>> sudo bash -c "echo 'ttm_bo_kmap' >
>>>> /sys/kernel/debug/tracing/set_graph_function"
>>>> sudo bash -c "echo function_graph >
>>>> /sys/kernel/debug/tracing/current_tracer"
>>>> sudo modprobe nouveau
>>>> sudo bash -c "cat /sys/kernel/debug/tracing/trace" > trace.log
>>>>
>>>> Please then send me the resulting trace.log file so that I can
>>>> investigate why mapping the framebuffer fails during driver load.
>>>>
>>>> Thanks in advance,
>>>> Christian.
>>>
>>> I hope this is what you need. I do normally turn off a lot of debug
>>> features. Let me know if I need to change the kernel config.
>>
>> It was not what I had expected but it pointed me in the right
>> direction. I think I've found the problem, it's just an uninitialized
>> return value for your hardware generation.
>>
>> Please try the attached patch and let me know if it fixes the problem.
>>
>> Thanks in advance,
>> Christian.
>
> Yep, that fixed it. -rc6?
If I get an rb today then yes, otherwise it might end up in -rc7 next week.
Any objection if I add an Reported-and-Tested-by: Mark Hounschell
<dmarkh@cfl.rr.com> ?
Thanks for the help,
Christian.
>
> Thanks
> Mark
>
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG][NOUVEAU] G70 broken since 5.10-rc1
[not found] ` <22bdd617-abda-6014-55d9-1677066641ca-5C7GfCeVMHo@public.gmane.org>
@ 2020-11-26 13:17 ` Mark Hounschell
0 siblings, 0 replies; 8+ messages in thread
From: Mark Hounschell @ 2020-11-26 13:17 UTC (permalink / raw)
To: Christian König, markh-n2QNKt385d+sTnJN9+BGXg,
nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
On 11/26/20 8:01 AM, Christian König wrote:
> Am 26.11.20 um 13:57 schrieb Mark Hounschell:
>> On 11/26/20 7:41 AM, Christian König wrote:
>>> Hi Mark,
>>>
>>> Am 26.11.20 um 13:26 schrieb Mark Hounschell:
>>>> On 11/26/20 7:05 AM, Christian König wrote:
>>>>> Hi Mark,
>>>>>
>>>>> Am 26.11.20 um 10:59 schrieb Mark Hounschell:
>>>>>> On 11/26/20 3:35 AM, Christian König wrote:
>>>>>>>> I'm running an older "NVIDIA Corporation G70 [GeForce 7800 GT] (rev
>>>>>>>> a1)" card in a newer BIOSTAR B550GTA MB. Kernel 5.10-rcx does not
>>>>>>>> work. I get no virtual consoles or X screen.
>>>>>
>>>>> thanks for the dmesg.
>>>>>
>>>>> Problem is I don't have the slightest idea what's going wrong here :)
>>>>>
>>>>> The code should be functional identical, it was just moved from TTM to
>>>>> nouveau, so we are missing some detail in the handling.
>>>>>
>>>>> Can you run the following test for me: First you need to disable
>>>>> loading of the nouveau kernel module by adding
>>>>> modprobe.blacklist=nouveau to the kernel command line.
>>>>>
>>>>> Then log into the system over the network and run the following commands:
>>>>>
>>>>> sudo modprobe ttm
>>>>> sudo bash -c "echo 'ttm_bo_kmap' >
>>>>> /sys/kernel/debug/tracing/set_graph_function"
>>>>> sudo bash -c "echo function_graph >
>>>>> /sys/kernel/debug/tracing/current_tracer"
>>>>> sudo modprobe nouveau
>>>>> sudo bash -c "cat /sys/kernel/debug/tracing/trace" > trace.log
>>>>>
>>>>> Please then send me the resulting trace.log file so that I can
>>>>> investigate why mapping the framebuffer fails during driver load.
>>>>>
>>>>> Thanks in advance,
>>>>> Christian.
>>>>
>>>> I hope this is what you need. I do normally turn off a lot of debug
>>>> features. Let me know if I need to change the kernel config.
>>>
>>> It was not what I had expected but it pointed me in the right direction.
>>> I think I've found the problem, it's just an uninitialized return value
>>> for your hardware generation.
>>>
>>> Please try the attached patch and let me know if it fixes the problem.
>>>
>>> Thanks in advance,
>>> Christian.
>>
>> Yep, that fixed it. -rc6?
>
> If I get an rb today then yes, otherwise it might end up in -rc7 next week.
>
> Any objection if I add an Reported-and-Tested-by: Mark Hounschell
> <dmarkh@cfl.rr.com> ?
>
> Thanks for the help,
> Christian.
>
Ya, no problem. Just use markh@compro.net though.
Regards
Mark
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-11-26 13:17 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-25 22:16 [BUG][NOUVEAU] G70 broken since 5.10-rc1 Mark Hounschell
[not found] ` <db0e5f78-8271-24b5-62f6-5473f69ac8d6-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2020-11-26 8:35 ` Christian König
[not found] ` <c2ee46af-79a8-9a07-b12d-b755017ee500-5C7GfCeVMHo@public.gmane.org>
2020-11-26 9:59 ` Mark Hounschell
[not found] ` <aa4e3741-b1b2-4ae2-6b35-880b40c985c8-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2020-11-26 12:05 ` Christian König
[not found] ` <3f22c4f6-83fd-ef11-ba1d-bc85d6a0d557@cfl.rr.com>
[not found] ` <3f22c4f6-83fd-ef11-ba1d-bc85d6a0d557-3tLf1voIkJTQT0dZR+AlfA@public.gmane.org>
2020-11-26 12:41 ` Christian König
[not found] ` <47ab20f6-dc56-8ade-29b6-f8fc684628d3-5C7GfCeVMHo@public.gmane.org>
2020-11-26 12:57 ` Mark Hounschell
[not found] ` <1d85e515-4d9c-30ec-c69b-217dacc1fa51-3tLf1voIkJTQT0dZR+AlfA@public.gmane.org>
2020-11-26 13:01 ` Christian König
[not found] ` <22bdd617-abda-6014-55d9-1677066641ca-5C7GfCeVMHo@public.gmane.org>
2020-11-26 13:17 ` Mark Hounschell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.