From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 35B0BC433EF for ; Sun, 27 Feb 2022 16:50:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231237AbiB0QvH (ORCPT ); Sun, 27 Feb 2022 11:51:07 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33724 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229446AbiB0QvH (ORCPT ); Sun, 27 Feb 2022 11:51:07 -0500 Received: from mail-wr1-x42f.google.com (mail-wr1-x42f.google.com [IPv6:2a00:1450:4864:20::42f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AB2FE55BDC for ; Sun, 27 Feb 2022 08:50:29 -0800 (PST) Received: by mail-wr1-x42f.google.com with SMTP id d28so11957099wra.4 for ; Sun, 27 Feb 2022 08:50:29 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=message-id:date:mime-version:user-agent:subject:content-language:to :cc:references:from:in-reply-to:content-transfer-encoding; bh=hODbYIBB4Dty+JgnbJu1q2oAhOEc2ZKfyRW0OVOWRA0=; b=GSY8VnFdRNFeTV84H3l3mpyBI5Q9kW1XXd3D++1xCep3EgG/ZAs03wGnNg3cZ2BiWW ZUIZl9pTRWZzwNFEVaZoCVuDLJDBg3ceSRM33Ar3zZqzcuCb0b3MHaVAB9W5uTf5Plye am+VdU7l2b6j7opuaBPUQFn4f1o3gyo8tdsPQiq5SsW4bWqKv40AtpJ4tRGE2Z4+DAE5 8mVxYVesn2yTtJGtELyABHjbZPLQT5/gD4p4/dDA8xasKoN+GtBPqS13Q5/gEPKTkVFp GFR4/FBdGgR2sMaZaBGcyvtsfpX2py4Pr9gfMZx+DmF5YBCSTkL+gDVb8BFp1WmaWXCl HvWQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:message-id:date:mime-version:user-agent:subject :content-language:to:cc:references:from:in-reply-to :content-transfer-encoding; bh=hODbYIBB4Dty+JgnbJu1q2oAhOEc2ZKfyRW0OVOWRA0=; b=3cXloKiNzIb9YXGW8W5tOHweH9NfYUzX73cQflgk6ZFnEr3kxXiirncp35H2CIdFm5 mfT1p+XfOg0gEnK3YBdsFT54EUC3jeF3m5aTUuMvNCEk3sC9dTUbVsUBZBJxRZX8ojsq NRynu0erphlJoLGByGbyya1pdplIHvM8jUyqSM7a6HFLua8WIab/em+E1BmGGJBzSCrC RKP9GZJgJXAcMSQgUN/Ig4ngWPbjzxUVPowUchMnFwelrZqGhRIaeXOvZUXaI42oG7X2 1gIF5T99X1ZsaqseOuU6oEy/s4FCQsDcrDr21rIrhQdTQ+pzsIkI91IO5ULhLPxxBcny 1zlw== X-Gm-Message-State: AOAM531jfBEzEVIPJZAKNF1t1n3hbWjPsqdZJlF6bqMgEr5lHfSK0WNz sGPQFnGm5ib8v9rIAUNngG8= X-Google-Smtp-Source: ABdhPJxtwsnCzccL696Klavp5s0ZzO3UQDW08/FSUVOuRA9cG9JSfg3BoHWaso6h/3S7YWP4HHmZ4w== X-Received: by 2002:a5d:6da1:0:b0:1e3:2bf5:13c with SMTP id u1-20020a5d6da1000000b001e32bf5013cmr13498932wrs.316.1645980628013; Sun, 27 Feb 2022 08:50:28 -0800 (PST) Received: from [192.168.0.40] (176-66-70-95.static.highway.a1.net. [176.66.70.95]) by smtp.googlemail.com with ESMTPSA id l5-20020adff485000000b001d54142b02bsm8072064wro.85.2022.02.27.08.50.26 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Sun, 27 Feb 2022 08:50:27 -0800 (PST) Message-ID: Date: Sun, 27 Feb 2022 17:50:24 +0100 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:91.0) Gecko/20100101 Firefox/91.0 Thunderbird/91.6.1 Subject: Re: RockPro65 RK3399 chipset, ISP and IMX214 camera Content-Language: de To: Ricardo Ribalda Delgado , Heiko Stuebner Cc: Kieran Bingham , linux-media References: <164570696256.4066078.10553504447380276248@Monstersaurus> <411433596.ldbydfAV7o@phil> From: Clemens Arth In-Reply-To: Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Hi, so I moved on with some tests and trying to fix the driver and the current libcamera version. The driver has still wrong registers I guess, but I can fix them later. Here's the output of v4l-ctl https://pastebin.com/ZkMZ1mjJ which looks kind of ok to me. However what does absolutely make no sense to me is the output of the gst-launcher, which also makes lc_compliance go totally crazy at some point: https://pastebin.com/6MdFL5BL Although I dived through a large number of drivers, I did not get how to set the available formats. While Ricardo included 2 formats, there are obviously 6 or so according to the documentation, however, how are those defined such that they show up correctly there? It's clear to me that the available formats should be defined first, before moving on to getting something out from the device, right? Is this a part of the libcamera part or the driver? I had to add quite a bunch of controls to the driver, and without checking the i2c communication in detail, there are at least no errors when I do v4l2-ctl -d /dev/v4l-subdev3 --set-ctrl "test_pattern=2" So I suspect that this actually works as expected... Best Clemens Am 25.02.22 um 08:37 schrieb Ricardo Ribalda Delgado: > Hi > > I think Heiko and Kieran have already given you a lot of clues. > > I would recommend to start looking at i2c communication with i2c > tools: i2cget, i2set, i2cdetect.... before trying any video operation. > > Your life will be much easier if you get your hands into a logic > analyser like this one https://www.saleae.com/ > > Regarding the i2c address, bear in mind that vendors and Linux might > use different nomenclature (7 bits to 8 bits). > > Good luck! > > On Thu, Feb 24, 2022 at 6:03 PM Heiko Stuebner wrote: >> >> Am Donnerstag, 24. Februar 2022, 16:10:06 CET schrieb Clemens Arth: >>> Hi Kieran, >>> >>> Thx, I’m on my mobile now so I hope copy pasting works… apologies for typos… >>> >>> Kieran Bingham schrieb am Do. 24. Feb. >>> 2022 um 13:49: >>> >>>> Hi Clemens, >>>> >>>> Quoting Clemens Arth (2022-02-23 18:36:28) >>>>> Hi everyone, >>>>> >>>>> + Ricardo and Heiko in CC as the driver originators and rockchip pros... >>>>> >>>>> I'm reaching out to you based on a discussion with Sebastian Fricke, who >>>>> was working on the OV13850 driver for the v5 kernel. I tried getting the >>>>> IMX214 finally to work on the RockPro64 from Pine64, which only works on >>>>> Android so far and I need to get that done on Mainline Linux (I did not >>>>> find anyone who managed that and reported about it). However, I'm also >>>>> totally stuck. >>>>> >>>>> The RockPro64 runs Dietpi, which is essentially Armbian + a few tweaks. >>>>> I'm using the Armbian 5.15.18 kernel, so mainline, with a custom device >>>>> tree, which in the first place powers the MIPI ports. I suspect it is a >>>>> bad idea to have one pinctrl as a placeholder for 4 converters, however, >>>>> I'm not too deep into proxying in the devicetree, so here's the current >>>>> status: >>>>> >>>>> https://pastebin.com/vs277ex0 >>>> >>>> Your regulators are all listed as fixed-regulators. Are you sure >>>> there's nothing else to turn on ? I expect this was from another >>>> fragement for the same platform? So I hope it's consistent. >>>> >>> >>> The schematics are here, from which I took the regulator and gpio config. >>> The regulators all seem to be fixed ones. There is just one pin that pulls >>> up all the regulators (DVP_PWR). >>> >>> https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf >>> >>> The IMX214 driver has only one pin, the enable_pin, but it is somewhat >>> different from the IMX219 for example. Looking at both driver's code I >>> believe what is the reset_pin with the IMX219 is the enable_pin with the >>> IMX214, but I am not sure about that. There is no MIPI reset on the >>> RockPro64 afaik. Therefore I think it needs to be wired to the DVP_PDN0_H >>> pin, but other drivers define that one specifically and it apparently does >>> something different. >> >> For the pins also check the direction (active_low / active_high). >> I remember having fun somewhere when changing between the vendor >> kernel and mainline. >> >> >>>> Can you validate that the enable-gpios definition is to the correct GPIO >>>> to enable the camera ? >>>> >>>>> The camera is connected to the first MIPI port. The kernel boot logs >>>>> look ok to me (except for the cyclic dependency issue, but I think that >>>>> does not matter much). >>>>> >>>>> https://pastebin.com/hvhdEfxm >>>>> >>>>> Without the camera configured in the device tree, it shows up as 0x0c >>>>> device on the #1 I2C bus, which is a bit suspicious to me given the >>>>> addresses in the documentation and the info given in the kernel >>>>> documentation. >>>>> >>>>> However, I essentially followed the description according to this guide >>>>> to set up the RKISP: >>>>> >>>>> https://linuxtv.org/downloads/v4l-dvb-apis/admin-guide/rkisp1.html >>>>> >>>>> using this: >>>>> >>>>> https://pastebin.com/ZqWC5vhC >>>>> >>>>> It looks like this (see also png attached). >>>>> >>>>> https://pastebin.com/MfTNp5Pd >>>>> >>>>> However, the IMX214 driver does not complain until that point and seems >>>>> to do right. I expected that at least something happens, however it does >>>>> not. The last command does this: >>>>> >>>>> VIDIOC_STREAMON returned -1 (No such device or address) and this is the >>>>> kernel output >>>>> >>>>> [1509.435228] imx214 1-000c: write_table error: -6 >>>>> [1509.435868] imx214 1-000c: could not sent common table -6 >>>> >>>> -6 is ENXIO 6 No such device or address. So I expect the device isn't >>>> responding to the I2C controller. >>>> >>>> What shows up with i2c-detect -r -y 1 ? >>>> >>> >>> From the top of my head, it shows 1c on the 0x0c address iirc, but only if >>> I remove the IMX from the DT. Otherwise the driver takes over and it shows >>> UU. I removed the camera physically and it was gone on i2cdetect, so I >>> suspect that it indeed is the camera. From the driver and the documentation >>> I need to configure it 4-lane, as it is hardcoded in the driver (compared >>> to the application notes for registers for the ImX214). >>> >>> >>>> >>>>> There is no more info given, even if I do some "echo 0x3F > >>>>> /sys/class/video4linux/v4l-subdev0/dev_debug" to the subdevs. >>>>> >>>>> Here's the IMX214 documentation btw. that I got through a detour from >>>> CSDN. >>>>> >>>>> >>>> https://www.dropbox.com/sh/5d3mp2akr3kmu7t/AADaAsSxZu2kVSIfEceStwuoa?dl=0 >>>>> >>>>> I'm not entirely sure, but there is something wrong somewhere and I >>>>> can't find out if it is with the driver, the RKISP or anything else. >>>>> Here's what "v4l2-ctl -d /dev/v4l-subdev3 --all" gives - not sure but >>>>> shouldn't it show supported resolutions or something? >>>>> >>>>> https://pastebin.com/ckAFPbAs >>>> >>>> You might find it useful to check what is missing to support libcamera >>>> with this sensor, then you can use cam/qcam to test it too. The RKISP1 >>>> pipeline handler in libcamera will handle all the media controller >>>> configuration, and identifying the available formats for you, but we >>>> haven't had an IMX214 sensor added yet, so you might need to add a >>>> mapping to the src/libcamera/camera_sensor_properties.cpp sensor >>>> database, and the driver is missing at least V4L2_CID_HBLANK and >>>> V4L2_CID_VBLANK that are required for libcamera. So it might not be as >>>> straightforward as I'd like, but it would be helpful I expect. >>> >>> >>> I tried that at an earlier stage, to no avail unfortunately. But I will try >>> again as soon as I get back to my desk. >>> >>>> >>>> >>>> But ... I think your issues are more likely underlying hardware or DT >>>> issues, as the device sounds like it's not responding on the i2c >>>> address. >>>> >>>> Sometimes I2C devices have a configurable address, can you check if this >>>> really is the correct I2C address for your camera? >>>> >>>> That’s one of the issues. Ricardo wrote about iirc 0x10 and 0x1a, but the >>> app note says something entirely different (forgot), and my camera appears >>> to be on yet another address… >> >> not specific to cameras, but in the past I had i2c devices that set the >> address depending on the state of a gpio during powerup - which was >> floating in my old case, producing random settings ;-) . >> >> >> Heiko >> >> > >