From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Sun, 21 Apr 2019 10:27:22 +0200 Subject: [U-Boot] [GIT] Pull request: u-boot-dfu v2 (14.04.2019) In-Reply-To: <20190419231802.3783e647@jawa> References: <20190419132349.52fd2c12@jawa> <20190419231802.3783e647@jawa> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 4/19/19 11:18 PM, Lukasz Majewski wrote: > Dear Marek, > > The following changes since commit > 1f4ae66eaab29bfb5d1eb44996f7826c9cd01ed1: > > Merge tag 'arc-for-2019.07' of git://git.denx.de/u-boot-arc > (2019-04-18 12:12:16 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-dfu.git > > for you to fetch changes up to 5e24783e992e0b2749a0e39ba3cab9900cd0b759: > > usb: dwc2: fix gadget disconnect (2019-04-19 16:56:53 +0200) > > ---------------------------------------------------------------- > Alex Kiernan (1): > fastboot: Replace literal 32 with PART_NAME_LEN > > Andy Shevchenko (1): > dfu: Avoid declaring unused variables and absent parameters > > Eugeniu Rosca (3): > fastboot: getvar: correct/rename "has_slot" to "has-slot" > fastboot: Improve error reporting on 'getvar partition-{size, > type}' fastboot: add support for 'getvar platform' > > Fabrice Gasnier (1): > usb: dwc2: fix gadget disconnect > > Patrice Chotard (1): > usb: dwc2_udc_otg: Add tx_fifo_sz array support > > Patrick Delaunay (16): > phy: usbphyc: remove unused variable index > phy: usbphyc: update xlate with DT binding > phy: usbphyc: Binding update of vdda supply > phy: usbphyc: move vdda1v1 and vdda1v8 in phy_init > phy: usbphyc: increase PLL wait timeout > usb: dwc2: remove unused variable regs_otg > usb: dwc2: convert driver to DM_USB_GADGET > usb: dwc2: force reset assert before to probe the driver > usb: dwc2: Add force-b-session-valid support > usb: dwc2: Add function for session B check > usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 register > usb: dwc2: add support for STM32MP1 > stm32mp1: remove CONFIG_USB_DWC2, HOST support for USBO > stm32mp1: migrate USBOTG device to driver model > stm32mp1: add stusb1600 support for DK1 and DK2 board > usb: reload watchdog during ums command > > > arch/arm/dts/stm32mp157-pinctrl.dtsi | 7 ++ > arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 3 +- > arch/arm/dts/stm32mp157a-dk1.dts | 34 +++++++- > arch/arm/dts/stm32mp157c-ed1.dts | 8 -- > arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi | 1 + > arch/arm/dts/stm32mp157c.dtsi | 5 +- > board/st/stm32mp1/stm32mp1.c | 185 > +++++++++++------------------------------ > cmd/dfu.c | 3 + > cmd/usb_mass_storage.c | 3 + > configs/stm32mp15_basic_defconfig | 2 +- > configs/stm32mp15_trusted_defconfig | 2 +- > doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt | 4 +- > doc/device-tree-bindings/usb/dwc2.txt | 58 +++++++++++++ > drivers/fastboot/fb_getvar.c | 16 +++- > drivers/fastboot/fb_mmc.c | 10 +-- > drivers/phy/phy-stm32-usbphyc.c | 111 > +++++++++++++------------ > drivers/usb/gadget/dwc2_udc_otg.c | 388 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-- > drivers/usb/gadget/dwc2_udc_otg_priv.h | 1 - > drivers/usb/gadget/dwc2_udc_otg_regs.h | 37 +++++++-- > drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c | 14 +++- > include/usb/dwc2_udc.h | 7 ++ 21 files > changed, 670 insertions(+), 229 deletions(-) create mode 100644 > doc/device-tree-bindings/usb/dwc2.txt > > Travis-CI: > https://travis-ci.org/lmajewski/u-boot-dfu/builds/522181824 Applied, thanks. -- Best regards, Marek Vasut