[U-Boot] [PATCH v2 00/14] STiH410-B2260: add reset, usb and fastboot support

From: Patrice CHOTARD <patrice.chotard@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/14] STiH410-B2260: add reset, usb and fastboot support
Date: Fri, 21 Apr 2017 06:56:10 +0000	[thread overview]
Message-ID: <dd43876e-393e-b877-6496-1613fff9f183@st.com> (raw)
In-Reply-To: <1490176456-24813-1-git-send-email-patrice.chotard@st.com>

fyi , a v3 has been send

On 03/22/2017 10:54 AM, patrice.chotard at st.com wrote:
> From: Patrice Chotard <patrice.chotard@st.com>
>
> This series adds :
> 	_ add reset driver
> 	_ update existing sdhci driver to use reset framework
> 	_ add usb phy driver
> 	_ add ehci support
> 	_ add ohci support
> 	_ add xhci support
> 	_ add fastboot support
>
> With all this feature enable, it's now possible to
> 	_ boot on usb mass storage device
> 	_ boot from kernel image and dtb previously loaded using tftp
> 	_ update mmc partiton using fastboot
> 	
> v2:	_ add Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> in patches 2,3 and 4
> 	_ fix remarks done by Marek Vasut :
> 		_ patch 5 : replace bitfield_replace() by clrsetbits_le32()
> 		_ patch 6 : update error messages and add remove callback
> 		_ patch 8 : put board specific defines in a separate patch
> 		_ patch 7: use setbits_le32() instead of read, modify, write
> 		  sequence and add missing parenthesis
> 		_ squash previous patches 7,9,11,12,14,16,17,18,19,20 and 21
> 		  in patch 14
>
> Patrice Chotard (14):
>   reset: Add STi reset support
>   mmc: sti_sdhci: Rework sti_mmc_core_config()
>   ARM: dts: stih410-family: Add missing reset_names for mmc1 node
>   mmc: sti_sdhci: Use reset framework
>   phy: Add STi phy usb support
>   usb: ehci: Add STi ehci support
>   usb: ohci: Add STi ohci support
>   board: STiH410-B2260: add OHCI related defines
>   usb: xhci: Add STi xhci support
>   board: STiH410-B2260: add XHCI related define
>   usb: dwc3: Add dwc3 support for STi
>   board: STiH410-B2260: add fastboot support
>   STiH410-B2260: enable USB Host Networking
>   STiH410-B2260: enable USB, fastboot, reset related flags
>
>  arch/arm/Kconfig                              |   1 +
>  arch/arm/dts/stih407-family.dtsi              |   1 +
>  arch/arm/include/asm/arch-stih410/sys_proto.h |  11 +
>  board/st/stih410-b2260/board.c                |  44 ++++
>  configs/stih410-b2260_defconfig               |  36 ++-
>  drivers/mmc/sti_sdhci.c                       |  60 +++--
>  drivers/reset/Kconfig                         |   8 +
>  drivers/reset/Makefile                        |   1 +
>  drivers/reset/sti-reset.c                     | 320 ++++++++++++++++++++++++++
>  drivers/usb/Kconfig                           |   4 +
>  drivers/usb/dwc3/Kconfig                      |   8 +
>  drivers/usb/dwc3/Makefile                     |   1 +
>  drivers/usb/dwc3/dwc3-sti.c                   | 135 +++++++++++
>  drivers/usb/host/Kconfig                      |  26 +++
>  drivers/usb/host/Makefile                     |   3 +
>  drivers/usb/host/ehci-sti.c                   | 115 +++++++++
>  drivers/usb/host/ohci-sti.c                   |  90 ++++++++
>  drivers/usb/host/xhci-sti.c                   | 156 +++++++++++++
>  drivers/usb/phy/Kconfig                       |  11 +
>  drivers/usb/phy/Makefile                      |   1 +
>  drivers/usb/phy/sti_phy_usb.c                 | 153 ++++++++++++
>  include/configs/stih410-b2260.h               |  16 ++
>  include/dwc3-sti-uboot.h                      |  50 ++++
>  23 files changed, 1225 insertions(+), 26 deletions(-)
>  create mode 100644 arch/arm/include/asm/arch-stih410/sys_proto.h
>  create mode 100644 drivers/reset/sti-reset.c
>  create mode 100644 drivers/usb/dwc3/dwc3-sti.c
>  create mode 100644 drivers/usb/host/ehci-sti.c
>  create mode 100644 drivers/usb/host/ohci-sti.c
>  create mode 100644 drivers/usb/host/xhci-sti.c
>  create mode 100644 drivers/usb/phy/Kconfig
>  create mode 100644 drivers/usb/phy/sti_phy_usb.c
>  create mode 100644 include/dwc3-sti-uboot.h
>