All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Gardiner <bengardiner@nanometrics.ca>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 3/5] mtdparts: show net size in mtdparts list
Date: Mon, 30 Aug 2010 13:38:58 -0400	[thread overview]
Message-ID: <dd55869c0dce98258874d18c6c9c9a4e0d3d871b.1283187599.git.bengardiner@nanometrics.ca> (raw)
In-Reply-To: <1283185640-0-git-send-email-bengardiner@nanometrics.ca>

This patch adds an additional column to the output of list_partitions. The
additional column will contain the net size and a '(!)' beside it if the net
size is not equal to the partition size.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Wolfgang Denk <wd@denx.de>
CC: Scott Wood <scottwood@freescale.com>
---

V2:
 * formatting: spaces after 'if' and 'for'
 * the entire new feature is conditional on a macro, there is now a zero-byte
  binary size impact when the macro is not defined.
 * return the net parition size directly from net_part_size instead of using
  an output variable

V3:
 * rebased to 54841ab50c20d6fa6c9cc3eb826989da3a22d934 of
   git://git.denx.de/u-boot.git
 * fix line length over 80 chars
 * update copyright of cmd_mtdparts.c

V4:
 * rebased to b417260d871d4d8d336c160d95ed40cc8c0fb0fa of
   git://git.denx.de/u-boot.git
 * removed copyright statement and changelog from file header
 * re-grouped list_partition #ifdefs into one
 * fixed multi-line comment style

V5:
 * rebased to 962ad59e25640e586e2bceabf67a628a27f8f508 of
   git://git.denx.de/u-boot.git
 * renumbered from 2/4 to 3/5
 * return uint64_t instead of u32 for net_size
 * do a quick if((cond) return
 * calculate net_size by adding-up good blocks instead of subtracting bad
   blocks
 * try to strike a balance; reuse more code between the branches of
   #if defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES) in
   print_partition_table
---
 common/cmd_mtdparts.c |   74 +++++++++++++++++++++++++++++++++++++++++++-----
 drivers/mtd/mtdcore.c |    5 ++-
 2 files changed, 69 insertions(+), 10 deletions(-)

diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c
index 772ad54..a8912ed 100644
--- a/common/cmd_mtdparts.c
+++ b/common/cmd_mtdparts.c
@@ -1215,38 +1215,96 @@ static int generate_mtdparts_save(char *buf, u32 buflen)
 	return ret;
 }
 
+#if defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES)
 /**
- * Format and print out a partition list for each device from global device
- * list.
+ * Get the net size (w/o bad blocks) of the given partition.
+ *
+ * @param mtd the mtd info
+ * @param part the partition
+ * @return the calculated net size of this partition
  */
-static void list_partitions(void)
+static uint64_t net_part_size(struct mtd_info *mtd, struct part_info *part)
+{
+	uint64_t gross_size, trailing_bad_size = 0;
+	int truncated = 0;
+
+	mtd_get_len_incl_bad(mtd, part->offset, part->size, &gross_size,
+			     &truncated);
+
+	if (!truncated) {
+			mtd_get_len_incl_bad(mtd, part->offset + part->size,
+					     mtd->erasesize, &trailing_bad_size,
+					     &truncated);
+			trailing_bad_size -= mtd->erasesize;
+	}
+
+	return part->size - (gross_size - trailing_bad_size - part->size);
+}
+#endif
+
+static void print_partition_table(void)
 {
 	struct list_head *dentry, *pentry;
 	struct part_info *part;
 	struct mtd_device *dev;
 	int part_num;
 
-	debug("\n---list_partitions---\n");
-	list_for_each(dentry, &devices) {
+list_for_each(dentry, &devices) {
 		dev = list_entry(dentry, struct mtd_device, link);
+		/* list partitions for given device */
+		part_num = 0;
+#if defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES)
+		struct mtd_info *mtd;
+
+		if (get_mtd_info(dev->id->type, dev->id->num, &mtd))
+			return;
+
+		printf("\ndevice %s%d <%s>, # parts = %d\n",
+				MTD_DEV_TYPE(dev->id->type), dev->id->num,
+				dev->id->mtd_id, dev->num_parts);
+		printf(" #: name\t\tsize\t\tnet size\toffset\t\tmask_flags\n");
+
+		list_for_each(pentry, &dev->parts) {
+			u32 net_size;
+			char *size_note;
+
+			part = list_entry(pentry, struct part_info, link);
+			net_size = net_part_size(mtd, part);
+			size_note = part->size == net_size ? " " : " (!)";
+			printf("%2d: %-20s0x%08x\t0x%08x%s\t0x%08x\t%d\n",
+					part_num, part->name, part->size,
+					net_size, size_note, part->offset,
+					part->mask_flags);
+#else /* !defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES) */
 		printf("\ndevice %s%d <%s>, # parts = %d\n",
 				MTD_DEV_TYPE(dev->id->type), dev->id->num,
 				dev->id->mtd_id, dev->num_parts);
 		printf(" #: name\t\tsize\t\toffset\t\tmask_flags\n");
 
-		/* list partitions for given device */
-		part_num = 0;
 		list_for_each(pentry, &dev->parts) {
 			part = list_entry(pentry, struct part_info, link);
 			printf("%2d: %-20s0x%08x\t0x%08x\t%d\n",
 					part_num, part->name, part->size,
 					part->offset, part->mask_flags);
-
+#endif /* defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES) */
 			part_num++;
 		}
 	}
+
 	if (list_empty(&devices))
 		printf("no partitions defined\n");
+}
+
+/**
+ * Format and print out a partition list for each device from global device
+ * list.
+ */
+static void list_partitions(void)
+{
+	struct part_info *part;
+
+	debug("\n---list_partitions---\n");
+	print_partition_table();
 
 	/* current_mtd_dev is not NULL only when we have non empty device list */
 	if (current_mtd_dev) {
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index cb86657..211b993 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -143,7 +143,8 @@ void put_mtd_device(struct mtd_info *mtd)
 	BUG_ON(c < 0);
 }
 
-#if defined(CONFIG_CMD_MTDPARTS_SPREAD)
+#if defined(CONFIG_CMD_MTDPARTS_SPREAD) || \
+    defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES)
 /**
  * mtd_get_len_incl_bad
  *
@@ -185,4 +186,4 @@ void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset,
 		}
 	}
 }
-#endif /* defined(CONFIG_CMD_MTDPARTS_SPREAD) */
+#endif
-- 
1.7.0.4

  parent reply	other threads:[~2010-08-30 17:38 UTC|newest]

Thread overview: 104+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-06 16:28 [U-Boot-Users] [PATCH, resend] Support dynamic/patched NAND ENV offset Harald Welte
2008-07-07 18:47 ` Scott Wood
2008-07-08  0:09   ` Harald Welte
2008-07-08 16:05     ` Scott Wood
2008-07-08 21:12       ` Wolfgang Denk
2008-07-09  0:23         ` Harald Welte
2008-07-09  7:05           ` Wolfgang Denk
2008-07-09  7:25             ` Harald Welte
2008-07-09  8:04               ` Wolfgang Denk
2008-07-09 12:13                 ` Harald Welte
2010-06-01 20:23                 ` [U-Boot] mtdparts: add bad-block skipping Ben Gardiner
2010-06-01 22:20                   ` Wolfgang Denk
2010-06-01 22:34                   ` Wolfgang Denk
2010-06-02  5:08                     ` Ben Gardiner
2010-06-02 15:58                   ` [U-Boot] [PATCH 0/4 v2] " Ben Gardiner
2010-07-05 21:43                     ` [U-Boot] [PATCH v3 0/4] " Ben Gardiner
2010-07-12 19:06                       ` Ben Gardiner
2010-08-09 20:43                       ` [U-Boot] [PATCH v4 " Ben Gardiner
2010-08-30 17:38                         ` [U-Boot] [PATCH v5 0/5] " Ben Gardiner
2010-08-30 17:38                           ` [U-Boot] [PATCH v5 2/5] mtd: add an mtd method for get_len_incl_bad() Ben Gardiner
2010-08-30 20:57                             ` Scott Wood
2010-08-31 13:50                               ` Ben Gardiner
2010-08-31 21:48                             ` [U-Boot] [PATCH v6 " Ben Gardiner
     [not found]                           ` <1283185640-0-git-send-email-bengardiner@nanometrics.ca>
2010-08-30 17:38                             ` Ben Gardiner [this message]
2010-08-30 20:50                               ` [U-Boot] [PATCH v5 3/5] mtdparts: show net size in mtdparts list Scott Wood
2010-08-31 13:51                                 ` Ben Gardiner
2010-08-31 15:57                                   ` Scott Wood
2010-08-31 21:48                               ` [U-Boot] [PATCH v6 " Ben Gardiner
2010-08-31 21:47                           ` [U-Boot] [PATCH v6 0/5] mtdparts: add bad-block skipping Ben Gardiner
2010-09-09 20:54                             ` Scott Wood
2010-08-09 20:43                       ` [U-Boot] [PATCH v4 1/4] mtdparts: regroup calls to get_mtd_device_nm Ben Gardiner
2010-08-09 20:43                       ` [U-Boot] [PATCH v4 2/4] mtdparts: show net size in mtdparts list Ben Gardiner
2010-08-26 18:57                         ` Scott Wood
2010-08-27 13:51                           ` Ben Gardiner
2010-08-27 15:44                           ` Ben Gardiner
2010-08-27 16:02                             ` Scott Wood
2010-08-27 16:45                               ` Ben Gardiner
2010-08-09 20:43                       ` [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread" Ben Gardiner
2010-08-26 21:12                         ` Scott Wood
2010-08-27 13:51                           ` Ben Gardiner
2010-08-27 21:36                             ` Ben Gardiner
2010-08-27 21:46                               ` Scott Wood
2010-08-27 21:52                                 ` Ben Gardiner
2010-08-27 21:59                                 ` Scott Wood
2010-08-28  3:59                                   ` Ben Gardiner
2010-08-30 20:24                                     ` Scott Wood
2010-08-30 20:30                                       ` Ben Gardiner
2010-08-30 17:38                         ` [U-Boot] [PATCH v5 4/5] " Ben Gardiner
2010-08-30 21:01                           ` Scott Wood
2010-08-30 21:05                             ` Scott Wood
2010-08-31 13:51                             ` Ben Gardiner
2010-08-31 21:48                           ` [U-Boot] [PATCH v6 " Ben Gardiner
2010-08-09 20:44                       ` [U-Boot] [PATCH v4 4/4] mtdparts: new add.spread: add part skipping bad blocks Ben Gardiner
2010-08-26 22:26                         ` Scott Wood
2010-08-27 13:52                           ` Ben Gardiner
2010-08-30 17:39                         ` [U-Boot] [PATCH v5 5/5] " Ben Gardiner
2010-08-31 21:48                           ` [U-Boot] [PATCH v6 " Ben Gardiner
2010-07-05 21:43                     ` [U-Boot] [PATCH v3 1/4] mtdparts: regroup calls to get_mtd_device_nm Ben Gardiner
2010-08-30 17:38                       ` [U-Boot] [PATCH v5 1/5] " Ben Gardiner
2010-08-31 21:48                         ` [U-Boot] [PATCH v6 " Ben Gardiner
2010-07-05 21:43                     ` [U-Boot] [PATCH v3 2/4] mtdparts: show net size in mtdparts list Ben Gardiner
2010-08-07 20:08                       ` Wolfgang Denk
2010-08-08  4:06                         ` Harald Welte
2010-08-08 13:16                           ` Wolfgang Denk
2010-08-09 14:45                         ` Ben Gardiner
2010-09-18 19:42                           ` Wolfgang Denk
2010-07-05 21:43                     ` [U-Boot] [PATCH v3 3/4] mtdparts: add new sub-command "spread" Ben Gardiner
2010-08-07 20:12                       ` Wolfgang Denk
2010-07-05 21:43                     ` [U-Boot] [PATCH v3 4/4] mtdparts: new add.e: add part skipping bad blocks Ben Gardiner
2010-08-07 20:16                       ` Wolfgang Denk
2010-06-02 15:58                   ` [U-Boot] [PATCH 1/4 v2] mtdparts: regroup calls to get_mtd_device_nm Ben Gardiner
2010-06-02 15:58                   ` [U-Boot] [PATCH 2/4 v2] mtdparts: show net size in mtdparts list Ben Gardiner
2010-06-02 15:58                   ` [U-Boot] [PATCH 3/4 v2] mtdparts: add new sub-command "spread" Ben Gardiner
2010-06-02 15:58                   ` [U-Boot] [PATCH 4/4 v2] mtdparts: new add.e: add part skipping bad blocks Ben Gardiner
2010-08-09 18:25                     ` Scott Wood
2010-08-09 18:39                       ` Ben Gardiner
2010-08-09 18:51                         ` Scott Wood
2010-06-01 20:23                 ` [U-Boot] [PATCH 1/4] mtdparts: regroup calls to get_mtd_device_nm Ben Gardiner
2010-06-02  7:06                   ` Stefan Roese
2010-06-01 20:23                 ` [U-Boot] [PATCH 2/4] mtdparts: show net size in mtdparts list Ben Gardiner
2010-06-02  7:15                   ` Stefan Roese
2010-06-01 20:23                 ` [U-Boot] [PATCH 3/4] mtdparts: add new sub-command "spread" Ben Gardiner
2010-06-01 20:23                 ` [U-Boot] [PATCH 4/4] mtdparts: new add.e: add part skipping bad blocks Ben Gardiner
2008-07-09  0:18       ` [U-Boot-Users] [PATCH, resend] Support dynamic/patched NAND ENV offset Harald Welte
2008-07-09  5:28       ` Harald Welte
2008-07-09  7:07         ` Harald Welte
2008-07-09  8:11       ` [U-Boot-Users] [PATCH] " Harald Welte
2008-07-11 17:28         ` Scott Wood
2010-05-17 21:04           ` [U-Boot] [PATCH] NAND: Support dynamic location of enviromnent (CONFIG_ENV_OFFSET_OOB) Ben Gardiner
2010-05-26 22:58             ` Scott Wood
2010-05-26 23:38               ` Ben Gardiner
2010-05-31 21:29               ` [U-Boot] [PATCH v2] NAND: environment offset in OOB (CONFIG_ENV_OFFSET_OOB) Ben Gardiner
2010-06-30 21:32                 ` [U-Boot] [PATCH v3] " Ben Gardiner
2010-06-30 21:41                   ` Wolfgang Denk
2010-07-01  4:09                     ` Ben Gardiner
2010-07-01  3:37                   ` Vipin KUMAR
2010-07-01  5:29                     ` Ben Gardiner
2010-07-01  7:17                   ` Harald Welte
2010-07-05 13:57                     ` Ben Gardiner
2010-07-05 17:27                     ` [U-Boot] [PATCH v4] " Ben Gardiner
2010-07-12 16:17                       ` Ben Gardiner
2010-07-12 16:19                         ` Scott Wood
2010-07-13 19:26                       ` Scott Wood
2010-07-13 21:17                         ` Ben Gardiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dd55869c0dce98258874d18c6c9c9a4e0d3d871b.1283187599.git.bengardiner@nanometrics.ca \
    --to=bengardiner@nanometrics.ca \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.