All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	Matti Vaittinen <mazziesaccount@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-power@fi.rohmeurope.com
Subject: [PATCH v4 05/16] dt_bindings: mfd: Add ROHM BD71815 PMIC
Date: Wed, 24 Mar 2021 09:23:54 +0200	[thread overview]
Message-ID: <ddfca197df1efb58534edcddf081ddbdd9c6bec4.1616566395.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1616566395.git.matti.vaittinen@fi.rohmeurope.com>

Document DT bindings for ROHM BD71815.

BD71815 is a single-chip power management IC mainly for battery-powered
portable devices. The IC integrates 5 bucks, 7 LDOs, a boost driver for
LED, a battery charger with a Coulomb counter, a real-time clock, a 32kHz
clock and two general-purpose outputs although only one is documented by
the data-sheet.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
No changes since v3
 .../bindings/mfd/rohm,bd71815-pmic.yaml       | 201 ++++++++++++++++++
 1 file changed, 201 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
new file mode 100644
index 000000000000..fe265bcab50d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71815 Power Management Integrated Circuit bindings
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  BD71815AGW is a single-chip power management ICs for battery-powered
+  portable devices. It integrates 5 buck converters, 8 LDOs, a boost driver
+  for LED and a 500 mA single-cell linear charger. Also included is a Coulomb
+  counter, a real-time clock (RTC), and a 32.768 kHz clock gate and two GPOs.
+
+properties:
+  compatible:
+    const: rohm,bd71815
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags. See ../gpio/gpio.txt for more information.
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    const: bd71815-32k-out
+
+  rohm,clkout-open-drain:
+    description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 1
+
+  rohm,charger-sense-resistor-ohms:
+    minimum: 10000000
+    maximum: 50000000
+    description: |
+      BD71827 and BD71828 have SAR ADC for measuring charging currents.
+      External sense resistor (RSENSE in data sheet) should be used. If
+      something other but 30MOhm resistor is used the resistance value
+      should be given here in Ohms.
+    default: 30000000
+
+  regulators:
+    $ref: ../regulator/rohm,bd71815-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  gpio-reserved-ranges:
+    description: |
+      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      used to mark the pins which should not be configured for GPIO. Please see
+      the ../gpio/gpio.txt for more information.
+
+  rohm,enable-hidden-gpo:
+    description: |
+      The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the
+      data-sheet as it's location in the middle of GND pins makes it hard to
+      use on PCB. If your board has managed to use this pin you can enable the
+      second GPO by defining this property. Dont enable this if you are unsure
+      about how the E5 pin is connected on your board.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71815";
+            reg = <0x4b>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            clocks = <&osc 0>;
+            #clock-cells = <0>;
+            clock-output-names = "bd71815-32k-out";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            rohm,charger-sense-resistor-ohms = <10000000>;
+
+            regulators {
+                buck1: buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1150000>;
+                    rohm,dvs-suspend-voltage = <950000>;
+                };
+                buck2: buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1150000>;
+                    rohm,dvs-suspend-voltage = <950000>;
+                };
+                buck3: buck3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <2700000>;
+                    regulator-always-on;
+                };
+                buck4: buck4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1850000>;
+                    regulator-always-on;
+                };
+                buck5: buck5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo1: ldo1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo2: ldo2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo3: ldo3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo4: ldo4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo5: ldo5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo6: ldodvref {
+                    regulator-name = "ldodvref";
+                    regulator-always-on;
+                };
+                ldo7: ldolpsr {
+                    regulator-name = "ldolpsr";
+                    regulator-always-on;
+                };
+
+                boost: wled {
+                    regulator-name = "wled";
+                    regulator-min-microamp = <10>;
+                    regulator-max-microamp = <25000>;
+                };
+            };
+        };
+    };
-- 
2.25.4


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

  parent reply	other threads:[~2021-03-24  7:24 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-24  7:21 [PATCH v4 00/16] Support ROHM BD71815 PMIC Matti Vaittinen
2021-03-24  7:22 ` [PATCH v4 01/16] rtc: bd70528: Do not require parent data Matti Vaittinen
2021-03-24  7:22 ` [PATCH v4 02/16] mfd: bd718x7: simplify by cleaning unnecessary device data Matti Vaittinen
2021-03-24  7:23 ` [PATCH v4 03/16] dt_bindings: bd71828: Add clock output mode Matti Vaittinen
2021-03-24  7:23 ` [PATCH v4 04/16] dt_bindings: regulator: Add ROHM BD71815 PMIC regulators Matti Vaittinen
2021-03-24  7:23 ` Matti Vaittinen [this message]
2021-03-24  7:25 ` [PATCH v4 06/16] mfd: Add ROHM BD71815 ID Matti Vaittinen
2021-03-24  7:26 ` [PATCH v4 07/16] mfd: Sort ROHM chip ID list for better readability Matti Vaittinen
2021-03-24  7:26 ` [PATCH v4 08/16] mfd: Support for ROHM BD71815 PMIC core Matti Vaittinen
2021-03-24  7:29 ` [PATCH v4 09/16] gpio: support ROHM BD71815 GPOs Matti Vaittinen
2021-03-25  9:35   ` Linus Walleij
2021-03-25 10:32     ` Matti Vaittinen
2021-05-10 12:58       ` regmap-gpio: Support set_config and other not quite so standard ICs? Matti Vaittinen
2021-05-10 16:54         ` Andy Shevchenko
2021-05-11  3:59           ` Matti Vaittinen
2021-05-14 20:34             ` Michael Walle
2021-05-17  4:46               ` Vaittinen, Matti
2021-03-26 11:26   ` [PATCH v4 09/16] gpio: support ROHM BD71815 GPOs Andy Shevchenko
2021-03-26 11:27     ` Andy Shevchenko
2021-03-26 13:33     ` Matti Vaittinen
2021-03-26 17:51       ` Andy Shevchenko
2021-03-28 16:59         ` Matti Vaittinen
2021-03-24  7:29 ` [PATCH v4 10/16] regulator: helpers: Export helper voltage listing Matti Vaittinen
2021-03-24  7:30 ` [PATCH v4 12/16] regulator: rohm-regulator: Support SNVS HW state Matti Vaittinen
2021-03-24  7:30 ` [PATCH v4 13/16] regulator: Support ROHM BD71815 regulators Matti Vaittinen
2021-03-24  7:30 ` [PATCH v4 14/16] clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC Matti Vaittinen
2021-03-24  7:31 ` [PATCH v4 15/16] rtc: bd70528: Support RTC on ROHM BD71815 Matti Vaittinen
2021-03-24  7:31 ` [PATCH v4 16/16] MAINTAINERS: Add ROHM BD71815AGW Matti Vaittinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ddfca197df1efb58534edcddf081ddbdd9c6bec4.1616566395.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-power@fi.rohmeurope.com \
    --cc=mazziesaccount@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.