From: Sandor.yu@nxp.com To: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, andrzej.hajda@intel.com, narmstrong@baylibre.com, robert.foss@linaro.org, Laurent.pinchart@ideasonboard.com, jonas@kwiboo.se, jernej.skrabec@gmail.com, hverkuil-cisco@xs4all.nl Cc: Sandor.yu@nxp.com, shengjiu.wang@nxp.com, cai.huoqing@linux.dev, maxime@cerno.tech, harry.wentland@amd.com Subject: [PATCH v3 3/4] drm: bridge: dw_hdmi: add reset function for PHY GEN1 Date: Fri, 15 Apr 2022 10:42:49 +0800 [thread overview] Message-ID: <e0b3be2d63fe3e95246fb8b8b0dcd57415b29e04.1649989179.git.Sandor.yu@nxp.com> (raw) In-Reply-To: <cover.1649989179.git.Sandor.yu@nxp.com> From: Sandor Yu <Sandor.yu@nxp.com> PHY reset register(MC_PHYRSTZ) active high reset control for PHY GEN2, and active low reset control for PHY GEN1. Rename function dw_hdmi_phy_reset to dw_hdmi_phy_gen2_reset. Add dw_hdmi_phy_gen1_reset function for PHY GEN1. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 14 +++++++++++--- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 2 +- include/drm/bridge/dw_hdmi.h | 4 +++- 3 files changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index 312500921754..ac98605a6811 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -1374,13 +1374,21 @@ static void dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable) HDMI_PHY_CONF0_SELDIPIF_MASK); } -void dw_hdmi_phy_reset(struct dw_hdmi *hdmi) +void dw_hdmi_phy_gen1_reset(struct dw_hdmi *hdmi) +{ + /* PHY reset. The reset signal is active low on Gen1 PHYs. */ + hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ); + hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ); +} +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen1_reset); + +void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi) { /* PHY reset. The reset signal is active high on Gen2 PHYs. */ hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ); hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ); } -EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset); +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_reset); void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address) { @@ -1534,7 +1542,7 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, if (phy->has_svsret) dw_hdmi_phy_enable_svsret(hdmi, 1); - dw_hdmi_phy_reset(hdmi); + dw_hdmi_phy_gen2_reset(hdmi); hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST); diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index 5e2b0175df36..2860e6bff8b7 100644 --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c @@ -135,7 +135,7 @@ static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi, dw_hdmi_phy_gen2_txpwron(hdmi, 0); dw_hdmi_phy_gen2_pddq(hdmi, 1); - dw_hdmi_phy_reset(hdmi); + dw_hdmi_phy_gen2_reset(hdmi); dw_hdmi_phy_gen2_pddq(hdmi, 0); diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h index 2a1f85f9a8a3..70082f80a8c8 100644 --- a/include/drm/bridge/dw_hdmi.h +++ b/include/drm/bridge/dw_hdmi.h @@ -187,9 +187,11 @@ void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address); void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data, unsigned char addr); +void dw_hdmi_phy_gen1_reset(struct dw_hdmi *hdmi); + void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable); void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable); -void dw_hdmi_phy_reset(struct dw_hdmi *hdmi); +void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi); enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi, void *data); -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Sandor.yu@nxp.com To: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, andrzej.hajda@intel.com, narmstrong@baylibre.com, robert.foss@linaro.org, Laurent.pinchart@ideasonboard.com, jonas@kwiboo.se, jernej.skrabec@gmail.com, hverkuil-cisco@xs4all.nl Cc: Sandor.yu@nxp.com, shengjiu.wang@nxp.com, cai.huoqing@linux.dev, maxime@cerno.tech Subject: [PATCH v3 3/4] drm: bridge: dw_hdmi: add reset function for PHY GEN1 Date: Fri, 15 Apr 2022 10:42:49 +0800 [thread overview] Message-ID: <e0b3be2d63fe3e95246fb8b8b0dcd57415b29e04.1649989179.git.Sandor.yu@nxp.com> (raw) In-Reply-To: <cover.1649989179.git.Sandor.yu@nxp.com> From: Sandor Yu <Sandor.yu@nxp.com> PHY reset register(MC_PHYRSTZ) active high reset control for PHY GEN2, and active low reset control for PHY GEN1. Rename function dw_hdmi_phy_reset to dw_hdmi_phy_gen2_reset. Add dw_hdmi_phy_gen1_reset function for PHY GEN1. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 14 +++++++++++--- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 2 +- include/drm/bridge/dw_hdmi.h | 4 +++- 3 files changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index 312500921754..ac98605a6811 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -1374,13 +1374,21 @@ static void dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable) HDMI_PHY_CONF0_SELDIPIF_MASK); } -void dw_hdmi_phy_reset(struct dw_hdmi *hdmi) +void dw_hdmi_phy_gen1_reset(struct dw_hdmi *hdmi) +{ + /* PHY reset. The reset signal is active low on Gen1 PHYs. */ + hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ); + hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ); +} +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen1_reset); + +void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi) { /* PHY reset. The reset signal is active high on Gen2 PHYs. */ hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ); hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ); } -EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset); +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_reset); void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address) { @@ -1534,7 +1542,7 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, if (phy->has_svsret) dw_hdmi_phy_enable_svsret(hdmi, 1); - dw_hdmi_phy_reset(hdmi); + dw_hdmi_phy_gen2_reset(hdmi); hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST); diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index 5e2b0175df36..2860e6bff8b7 100644 --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c @@ -135,7 +135,7 @@ static int sun8i_hdmi_phy_config_a83t(struct dw_hdmi *hdmi, dw_hdmi_phy_gen2_txpwron(hdmi, 0); dw_hdmi_phy_gen2_pddq(hdmi, 1); - dw_hdmi_phy_reset(hdmi); + dw_hdmi_phy_gen2_reset(hdmi); dw_hdmi_phy_gen2_pddq(hdmi, 0); diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h index 2a1f85f9a8a3..70082f80a8c8 100644 --- a/include/drm/bridge/dw_hdmi.h +++ b/include/drm/bridge/dw_hdmi.h @@ -187,9 +187,11 @@ void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address); void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data, unsigned char addr); +void dw_hdmi_phy_gen1_reset(struct dw_hdmi *hdmi); + void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable); void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable); -void dw_hdmi_phy_reset(struct dw_hdmi *hdmi); +void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi); enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi, void *data); -- 2.25.1
next prev parent reply other threads:[~2022-04-15 2:44 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-04-15 2:42 [PATCH v3 0/4] DRM: Bridge: DW_HDMI: Add new features and bug fix Sandor.yu 2022-04-15 2:42 ` Sandor.yu 2022-04-15 2:42 ` [PATCH v3 1/4] drm: bridge: dw_hdmi: default enable workaround to clear the overflow Sandor.yu 2022-04-15 2:42 ` Sandor.yu 2022-04-15 2:42 ` [PATCH v3 2/4] drm: bridge: dw_hdmi: Enable GCP only for Deep Color Sandor.yu 2022-04-15 2:42 ` Sandor.yu 2022-04-15 7:08 ` Neil Armstrong 2022-04-15 7:08 ` Neil Armstrong 2022-04-15 2:42 ` Sandor.yu [this message] 2022-04-15 2:42 ` [PATCH v3 3/4] drm: bridge: dw_hdmi: add reset function for PHY GEN1 Sandor.yu 2022-04-15 2:42 ` [PATCH v3 4/4] drm: bridge: dw_hdmi: Audio: Add General Parallel Audio (GPA) driver Sandor.yu 2022-04-15 2:42 ` Sandor.yu 2022-04-15 7:11 ` Neil Armstrong 2022-04-15 7:11 ` Neil Armstrong 2022-04-19 16:32 ` [PATCH v3 0/4] DRM: Bridge: DW_HDMI: Add new features and bug fix Robert Foss 2022-04-19 16:32 ` Robert Foss
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=e0b3be2d63fe3e95246fb8b8b0dcd57415b29e04.1649989179.git.Sandor.yu@nxp.com \ --to=sandor.yu@nxp.com \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=andrzej.hajda@intel.com \ --cc=cai.huoqing@linux.dev \ --cc=dri-devel@lists.freedesktop.org \ --cc=harry.wentland@amd.com \ --cc=hverkuil-cisco@xs4all.nl \ --cc=jernej.skrabec@gmail.com \ --cc=jonas@kwiboo.se \ --cc=linux-kernel@vger.kernel.org \ --cc=maxime@cerno.tech \ --cc=narmstrong@baylibre.com \ --cc=robert.foss@linaro.org \ --cc=shengjiu.wang@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.