From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Wed, 12 Feb 2020 07:36:59 +0100 Subject: dm, serial: problem with using ns16550 driver before relocation on mpc83xx In-Reply-To: References: <1b1905b5-b696-dbe9-2708-5ed9ea6bf1ac@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Mario, Simon, Am 10.02.2020 um 07:16 schrieb Mario Six: > Hi Heiko, > > On Fri, Feb 7, 2020 at 6:53 AM Heiko Schocher wrote: >> >> Hi Simon, >> >> removed Dirk from cc and added Mario Six >> >> @Mario: Dirk is maintainer of the gazerbeam board: >> >> https://gitlab.denx.de/u-boot/u-boot/blob/master/board/gdsys/mpc8308/MAINTAINERS#L2 >> >> but EMail get not delivered to his EMail address ... so I added >> you to cc ... may you have a gazerbeam board? May you can try, >> if current U-Boot mainline works (in special serial console) on it? >> > Dirk no longer works as gdsys (which is also the reason why I'm much less > active on the mailing list than I used to be). > > I have a gazerbeam board. I'll try to get some time to test mainline on it some > time this week. The problem is gone, no need for my fix. I made a cleanbuild after I rebased with mainline this morning (without my "fix"), and all works fine. Sorry for the inconvenience! bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de