From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hoefle Marco Date: Tue, 27 Oct 2015 11:12:09 +0000 Subject: [U-Boot] u-boot device model SPI + SPI Flash In-Reply-To: <562E2FEE.60605@xilinx.com> References: <7ccbb9ae7fdb4663832167baa173d6b8@LysExc01.nanotronic.local> <0af28a07c7704451be0aa3fce01764d0@LysExc01.nanotronic.local> <320637582ef942f0b71a55d692d254e5@LysExc01.nanotronic.local> <7a85439a92f64a71a5f2b08b3fdc4576@LysExc01.nanotronic.local> <562E2FEE.60605@xilinx.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > -----Original Message----- > From: Michal Simek [mailto:michal.simek at xilinx.com] > Sent: Montag, 26. Oktober 2015 14:52 > To: Jagan Teki ; Hoefle Marco > ; Michal Simek > Cc: u-boot at lists.denx.de > Subject: Re: [U-Boot] u-boot device model SPI + SPI Flash > > On 10/23/2015 12:20 PM, Jagan Teki wrote: > > On 23 October 2015 at 15:42, Hoefle Marco > wrote: > >> Maybe somebody has a valid u-boot dts file for a microblaze system with > an SPI core? That would helpful. > >> We want to move from a parallel nor flash to a SPI flash for FPGA config, > u-boot, Linux Kernel and rootfs. > >> The last missing part is u-boot. The kernel dts file is ok and the mtd > partitions are set up correctly. > > > > I even grepped on linux/arch/microblaze couldn't get much info, So > > added Michal he well aware of this may be he can help. > > > http://www.xilinx.com/support/download/index.html/content/xilinx/en/do > wnloadNav/embedded-design-tools/2015-2.html > > ac701 bsp and I expect also Kc705. I downloaded the AC701 bsp file but it is not a valid archive. Do I need to use (and learn how to use) the 3 GB pertalinux tools to build u-boot for Microblaze? The u-boot config for the AC701 and the dts file would probably sufficient. > Thanks, > Michal > >