Re: [PATCH 00/14] Multiple improvement to qca8k stability

From: Florian Fainelli <f.fainelli@gmail.com>
To: Ansuel Smith <ansuelsmth@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 00/14] Multiple improvement to qca8k stability
Date: Thu, 22 Apr 2021 18:51:02 -0700	[thread overview]
Message-ID: <e8abff3d-99a8-3ada-9fef-103ce0f7659b@gmail.com> (raw)
In-Reply-To: <20210423014741.11858-1-ansuelsmth@gmail.com>

On 4/22/2021 6:47 PM, Ansuel Smith wrote:
> Currently qca8337 switch are widely used on ipq8064 based router.
> On these particular router it was notice a very unstable switch with
> port not link detected as link with unknown speed, port dropping
> randomly and general unreliability. Lots of testing and comparison
> between this dsa driver and the original qsdk driver showed lack of some
> additional delay and values. A main difference arised from the original
> driver and the dsa one. The original driver didn't use MASTER regs to
> read phy status and the dedicated mdio driver worked correctly. Now that
> the dsa driver actually use these regs, it was found that these special
> read/write operation required mutual exclusion to normal
> qca8k_read/write operation. The add of mutex for these operation fixed
> the random port dropping and now only the actual linked port randomly
> dropped. Adding additional delay for set_page operation and fixing a bug
> in the mdio dedicated driver fixed also this problem. The current driver
> requires also more time to apply vlan switch. All of these changes and
> tweak permit a now very stable and reliable dsa driver and 0 port
> dropping. This series is currently tested by at least 5 user with
> different routers and all reports positive results and no problems.

Since all of these changes are improvements and not really bug fixes,
please target them at the net-next tree:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/networking/netdev-FAQ.rst#n40

also, the subject for your patches should just be:

net: dsa: qca8k:
net: mdio: mdio-ipq8064:

to be consistent with previous submissions in these files.

> 
> Ansuel Smith (14):
>   drivers: net: dsa: qca8k: handle error with set_page
>   drivers: net: dsa: qca8k: tweak internal delay to oem spec
>   drivers: net: mdio: mdio-ip8064: improve busy wait delay
>   drivers: net: dsa: qca8k: apply suggested packet priority
>   drivers: net: dsa: qca8k: add support for qca8327 switch
>   devicetree: net: dsa: qca8k: Document new compatible qca8327
>   drivers: net: dsa: qca8k: limit priority tweak to qca8337 switch
>   drivers: net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327
>   drivers: net: dsa: qca8k: add support for switch rev
>   drivers: net: dsa: qca8k: add support for specific QCA access function
>   drivers: net: dsa: qca8k: apply switch revision fix
>   drivers: net: dsa: qca8k: clear MASTER_EN after phy read/write
>   drivers: net: dsa: qca8k: protect MASTER busy_wait with mdio mutex
>   drivers: net: dsa: qca8k: enlarge mdio delay and timeout
> 
>  .../devicetree/bindings/net/dsa/qca8k.txt     |   1 +
>  drivers/net/dsa/qca8k.c                       | 256 ++++++++++++++++--
>  drivers/net/dsa/qca8k.h                       |  54 +++-
>  drivers/net/mdio/mdio-ipq8064.c               |  36 ++-
>  4 files changed, 304 insertions(+), 43 deletions(-)
> 

-- 
Florian