All of lore.kernel.org
 help / color / mirror / Atom feed
From: vijayakannan.ayyathurai@intel.com
To: wim@linux-watchdog.org, linux@roeck-us.net, robh+dt@kernel.org
Cc: linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
	andriy.shevchenko@linux.intel.com, mgross@linux.intel.com,
	wan.ahmad.zainie.wan.mohamad@intel.com,
	lakshmi.bai.raja.subramanian@intel.com,
	vijayakannan.ayyathurai@intel.com
Subject: [PATCH v3 1/2] watchdog: Add watchdog driver for Intel Keembay Soc
Date: Tue,  1 Dec 2020 23:10:33 +0800	[thread overview]
Message-ID: <e941999cb6ccd19d1830b3205ec3a66081ed29fd.1606833303.git.vijayakannan.ayyathurai@intel.com> (raw)
In-Reply-To: <cover.1606833303.git.vijayakannan.ayyathurai@intel.com>
In-Reply-To: <cover.1606833303.git.vijayakannan.ayyathurai@intel.com>

From: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>

Intel Keembay Soc requires watchdog timer support.
Add watchdog driver to enable this.

Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/watchdog/Kconfig       |  13 ++
 drivers/watchdog/Makefile      |   1 +
 drivers/watchdog/keembay_wdt.c | 284 +++++++++++++++++++++++++++++++++
 3 files changed, 298 insertions(+)
 create mode 100644 drivers/watchdog/keembay_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fd7968635e6d..f412cf2d0f1a 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -2163,4 +2163,17 @@ config USBPCWATCHDOG
 
 	  Most people will say N.
 
+config KEEMBAY_WATCHDOG
+	tristate "Intel Keem Bay SoC non-secure watchdog"
+	depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)
+	select WATCHDOG_CORE
+	help
+	 This option enable support for an In-secure watchdog timer driver for
+	 Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every
+	 count unit. An interrupt will be triggered, when the count crosses
+	 the thershold configured in the register.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called keembay_wdt.
+
 endif # WATCHDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 071a2e50be98..f6f9f434f407 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -146,6 +146,7 @@ obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
 obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
 obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
 obj-$(CONFIG_MLX_WDT) += mlx_wdt.o
+obj-$(CONFIG_KEEMBAY_WATCHDOG) += keembay_wdt.o
 
 # M68K Architecture
 obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
diff --git a/drivers/watchdog/keembay_wdt.c b/drivers/watchdog/keembay_wdt.c
new file mode 100644
index 000000000000..1e1a1447c729
--- /dev/null
+++ b/drivers/watchdog/keembay_wdt.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Watchdog driver for Intel Keem Bay non-secure watchdog.
+ *
+ * Copyright (C) 2020 Intel Corporation
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+
+/* Non-secure watchdog register offsets */
+#define TIM_WATCHDOG		0x0
+#define TIM_WATCHDOG_INT_THRES	0x4
+#define TIM_WDOG_EN		0x8
+#define TIM_SAFE		0xc
+
+#define WDT_ISR_MASK		GENMASK(9, 8)
+#define WDT_ISR_CLEAR		0x8200ff18
+#define WDT_UNLOCK		0xf1d0dead
+#define WDT_LOAD_MAX		U32_MAX
+#define WDT_LOAD_MIN		1
+#define WDT_TIMEOUT		5
+
+static unsigned int timeout = WDT_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout period in seconds (default = "
+		 __MODULE_STRING(WDT_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default = "
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct keembay_wdt {
+	struct watchdog_device	wdd;
+	struct clk		*clk;
+	unsigned int		rate;
+	int			to_irq;
+	int			th_irq;
+	void __iomem		*base;
+};
+
+static inline u32 keembay_wdt_readl(struct keembay_wdt *wdt, u32 offset)
+{
+	return readl(wdt->base + offset);
+}
+
+static inline void keembay_wdt_writel(struct keembay_wdt *wdt,
+				      u32 offset, u32 val)
+{
+	writel(WDT_UNLOCK, wdt->base + TIM_SAFE);
+	writel(val, wdt->base + offset);
+}
+
+static void keembay_wdt_set_timeout_reg(struct watchdog_device *wdog, bool ping)
+{
+	struct keembay_wdt *wdt = watchdog_get_drvdata(wdog);
+	u32 th_val = 0;
+
+	if (!ping && wdog->pretimeout) {
+		th_val = wdog->timeout - wdog->pretimeout;
+		keembay_wdt_writel(wdt, TIM_WATCHDOG_INT_THRES, th_val * wdt->rate);
+	}
+
+	keembay_wdt_writel(wdt, TIM_WATCHDOG, wdog->timeout * wdt->rate);
+}
+
+static int keembay_wdt_start(struct watchdog_device *wdog)
+{
+	struct keembay_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	keembay_wdt_set_timeout_reg(wdog, false);
+	keembay_wdt_writel(wdt, TIM_WDOG_EN, 1);
+
+	return 0;
+}
+
+static int keembay_wdt_stop(struct watchdog_device *wdog)
+{
+	struct keembay_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	keembay_wdt_writel(wdt, TIM_WDOG_EN, 0);
+
+	return 0;
+}
+
+static int keembay_wdt_ping(struct watchdog_device *wdog)
+{
+	keembay_wdt_set_timeout_reg(wdog, true);
+
+	return 0;
+}
+
+static int keembay_wdt_set_timeout(struct watchdog_device *wdog, u32 t)
+{
+	wdog->timeout = t;
+	keembay_wdt_set_timeout_reg(wdog, false);
+
+	return 0;
+}
+
+static int keembay_wdt_set_pretimeout(struct watchdog_device *wdog, u32 t)
+{
+	wdog->pretimeout = t;
+	keembay_wdt_set_timeout_reg(wdog, false);
+
+	return 0;
+}
+
+static unsigned int keembay_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	struct keembay_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	return keembay_wdt_readl(wdt, TIM_WATCHDOG) / wdt->rate;
+}
+
+/*
+ * SMC call is used to clear the interrupt bits, because the TIM_GEN_CONFIG
+ * register is in the secure bank.
+ */
+static irqreturn_t keembay_wdt_to_isr(int irq, void *dev_id)
+{
+	struct keembay_wdt *wdt = dev_id;
+	struct arm_smccc_res res;
+
+	keembay_wdt_writel(wdt, TIM_WATCHDOG, 1);
+	arm_smccc_smc(WDT_ISR_CLEAR, WDT_ISR_MASK, 0, 0, 0, 0, 0, 0, &res);
+	dev_crit(wdt->wdd.parent, "Intel Keem Bay non-sec wdt timeout.\n");
+	emergency_restart();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t keembay_wdt_th_isr(int irq, void *dev_id)
+{
+	struct keembay_wdt *wdt = dev_id;
+	struct arm_smccc_res res;
+	u32 th_val = 0;
+
+	if (wdt->wdd.pretimeout)
+		th_val = wdt->wdd.timeout - wdt->wdd.pretimeout;
+
+	keembay_wdt_writel(wdt, TIM_WATCHDOG, th_val * wdt->rate + 1);
+	arm_smccc_smc(WDT_ISR_CLEAR, WDT_ISR_MASK, 0, 0, 0, 0, 0, 0, &res);
+	dev_crit(wdt->wdd.parent, "Intel Keem Bay non-sec wdt pre-timeout.\n");
+	watchdog_notify_pretimeout(&wdt->wdd);
+
+	return IRQ_HANDLED;
+}
+
+static const struct watchdog_info keembay_wdt_info = {
+	.identity	= "Intel Keem Bay Watchdog Timer",
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_PRETIMEOUT |
+			  WDIOF_MAGICCLOSE |
+			  WDIOF_KEEPALIVEPING,
+};
+
+static const struct watchdog_ops keembay_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= keembay_wdt_start,
+	.stop		= keembay_wdt_stop,
+	.ping		= keembay_wdt_ping,
+	.set_timeout	= keembay_wdt_set_timeout,
+	.set_pretimeout	= keembay_wdt_set_pretimeout,
+	.get_timeleft	= keembay_wdt_get_timeleft,
+};
+
+static int keembay_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct keembay_wdt *wdt;
+	int ret;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	/* we do not need to enable the clock as it is enabled by default */
+	wdt->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(wdt->clk))
+		return dev_err_probe(dev, PTR_ERR(wdt->clk), "Failed to get clock\n");
+
+	wdt->rate = clk_get_rate(wdt->clk);
+	if (!wdt->rate)
+		return dev_err_probe(dev, -EINVAL, "Failed to get clock rate\n");
+
+	wdt->th_irq = platform_get_irq_byname(pdev, "threshold");
+	if (wdt->th_irq < 0)
+		return dev_err_probe(dev, wdt->th_irq, "Failed to get IRQ for threshold\n");
+
+	ret = devm_request_irq(dev, wdt->th_irq, keembay_wdt_th_isr, 0,
+			       "keembay-wdt", wdt);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to request IRQ for threshold\n");
+
+	wdt->to_irq = platform_get_irq_byname(pdev, "timeout");
+	if (wdt->to_irq < 0)
+		return dev_err_probe(dev, wdt->to_irq, "Failed to get IRQ for timeout\n");
+
+	ret = devm_request_irq(dev, wdt->to_irq, keembay_wdt_to_isr, 0,
+			       "keembay-wdt", wdt);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to request IRQ for timeout\n");
+
+	wdt->wdd.parent		= dev;
+	wdt->wdd.info		= &keembay_wdt_info;
+	wdt->wdd.ops		= &keembay_wdt_ops;
+	wdt->wdd.min_timeout	= WDT_LOAD_MIN;
+	wdt->wdd.max_timeout	= WDT_LOAD_MAX / wdt->rate;
+	wdt->wdd.timeout	= WDT_TIMEOUT;
+
+	watchdog_set_drvdata(&wdt->wdd, wdt);
+	watchdog_set_nowayout(&wdt->wdd, nowayout);
+	watchdog_init_timeout(&wdt->wdd, timeout, dev);
+	keembay_wdt_set_timeout(&wdt->wdd, wdt->wdd.timeout);
+
+	ret = devm_watchdog_register_device(dev, &wdt->wdd);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register watchdog device.\n");
+
+	platform_set_drvdata(pdev, wdt);
+	dev_info(dev, "Initial timeout %d sec%s.\n",
+		 wdt->wdd.timeout, nowayout ? ", nowayout" : "");
+
+	return 0;
+}
+
+static int __maybe_unused keembay_wdt_suspend(struct device *dev)
+{
+	struct keembay_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		return keembay_wdt_stop(&wdt->wdd);
+
+	return 0;
+}
+
+static int __maybe_unused keembay_wdt_resume(struct device *dev)
+{
+	struct keembay_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		return keembay_wdt_start(&wdt->wdd);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(keembay_wdt_pm_ops, keembay_wdt_suspend,
+			 keembay_wdt_resume);
+
+static const struct of_device_id keembay_wdt_match[] = {
+	{ .compatible = "intel,keembay-wdt" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, keembay_wdt_match);
+
+static struct platform_driver keembay_wdt_driver = {
+	.probe		= keembay_wdt_probe,
+	.driver		= {
+		.name		= "keembay_wdt",
+		.of_match_table	= keembay_wdt_match,
+		.pm		= &keembay_wdt_pm_ops,
+	},
+};
+
+module_platform_driver(keembay_wdt_driver);
+
+MODULE_DESCRIPTION("Intel Keem Bay SoC watchdog driver");
+MODULE_AUTHOR("Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


  reply	other threads:[~2020-12-01 15:15 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-01 15:10 [PATCH v3 0/2] Add drivers for Intel Keem Bay SoC watchdog vijayakannan.ayyathurai
2020-12-01 15:10 ` vijayakannan.ayyathurai [this message]
2020-12-01 16:30   ` [PATCH v3 1/2] watchdog: Add watchdog driver for Intel Keembay Soc Guenter Roeck
2020-12-02 14:55     ` Ayyathurai, Vijayakannan
2020-12-02 16:32       ` Guenter Roeck
2020-12-02 17:12         ` Ayyathurai, Vijayakannan
2020-12-01 15:10 ` [PATCH v3 2/2] dt-bindings: watchdog: Add bindings for Intel Keem Bay SoC vijayakannan.ayyathurai
2020-12-01 15:41   ` Ayyathurai, Vijayakannan
2020-12-07 18:23   ` Rob Herring
2020-12-08  2:21     ` Ayyathurai, Vijayakannan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e941999cb6ccd19d1830b3205ec3a66081ed29fd.1606833303.git.vijayakannan.ayyathurai@intel.com \
    --to=vijayakannan.ayyathurai@intel.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lakshmi.bai.raja.subramanian@intel.com \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mgross@linux.intel.com \
    --cc=robh+dt@kernel.org \
    --cc=wan.ahmad.zainie.wan.mohamad@intel.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.