From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: Please pull u-boot-marvell/master
Date: Thu, 13 May 2021 12:21:38 +0200 [thread overview]
Message-ID: <e9e253b1-9a7b-d648-8459-45cee65ef204@denx.de> (raw)
Hi Tom,
please pull the next batch of Marvell Armada related patches. Here the
summary log:
----------------------------------------------------------------
- Add base support for Marvell OcteonTX2 CN9130 DB (mostly done
by Kostya)
- Sync Armada mvpp2 ethernet driver with Marvell version (misc Marvell
authors)
- Sync Armada 8k MMU setup with Marvell version (misc Marvell
authors)
- spi: kirkwood: Some fixes especially for baudrate generation
(misc Marvell authors)
- mvebu: x530: Reduce SPL image size (Stefan)
- Rename "rx_training" to "mvebu_comphy_rx_training" (Stefan)
----------------------------------------------------------------
Here the Azure build:
https://dev.azure.com/sr0718/u-boot/_build/results?buildId=87&view=results
It shows some issues with xilinx_versal_virt, which seem to be not
related to this patch set and also occurred yesterday.
Thanks,
Stefan
The following changes since commit ea184cbff99ea1d82dcf94c95afe054e95da5069:
Merge tag 'ti-v2021.07-rc3' of
https://source.denx.de/u-boot/custodians/u-boot-ti (2021-05-12 10:07:21
-0400)
are available in the Git repository at:
git at source.denx.de:u-boot/custodians/u-boot-marvell.git
for you to fetch changes up to e0a6df9efa69bfe662def66d12b8702ad1cf3a51:
arm: octeontx2: Add Octeon TX2 CN913x DB support (2021-05-13 08:18:19
+0200)
----------------------------------------------------------------
Ben Peled (3):
net: mvpp2: AN Bypass in 1000 and 2500 basex mode
net: mvpp2: remove unused define MVPP22_SMI_PHY_ADDR_REG
net: mvpp2: fix missing switch case break
Grzegorz Jaszczyk (4):
spi: kirkwood: prevent limiting speed to 0
arm64: mvebu: do not map firmware RT service region
arm64: mvebu: a8k: move firmware related definitions to fw info
arm64: mvebu: extend the mmio region
Ken Ma (1):
spi: kirkwood: support extended baud rates
Konstantin Porotchkin (2):
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
arm: octeontx2: Add Octeon TX2 CN913x DB support
Marcin Wojtas (4):
net: mvpp2: remove redundant SMI address configuration
net: mvpp2: add explicit sgmii-2500 support
spi: kirkwood: prevent configuring speed exceeding max controller
freq
pcie: designware: mvebu: do not configure ATU for IO when not used
Stefan Chulski (5):
phy: introduce 1000BaseX and 2500BaseX modes
net: mvpp2: add CP115 port1 10G/5G SFI support
net: mvpp2: add 1000BaseX and 2500BaseX ppv2 support
net: mvpp2: Fix 2.5G GMII_SPEED configurations
net: mvpp2: allow MDIO registration for fixed links
Stefan Roese (2):
mvebu: x530: Reduce SPL image size
cmd: mvebu: Rename rx_training to mvebu_comphy_rx_training
jinghua (1):
arm64: mvebu: a8k: align memory regions
arch/arm/dts/Makefile | 6 +
arch/arm/dts/cn9130-db-A.dts | 55 ++++
arch/arm/dts/cn9130-db-B.dts | 51 ++++
arch/arm/dts/cn9130-db-dev-info.dtsi | 44 +++
arch/arm/dts/cn9130-db.dtsi | 316
++++++++++++++++++++++
arch/arm/dts/cn9131-db-A.dts | 54 ++++
arch/arm/dts/cn9131-db-B.dts | 69 +++++
arch/arm/dts/cn9131-db.dtsi | 166 ++++++++++++
arch/arm/dts/cn9132-db-A.dts | 13 +
arch/arm/dts/cn9132-db-B.dts | 13 +
arch/arm/dts/cn9132-db.dtsi | 217 +++++++++++++++
arch/arm/mach-mvebu/armada8k/cpu.c | 70 ++---
arch/arm/mach-mvebu/include/mach/fw_info.h | 18 ++
board/Marvell/octeontx2_cn913x/MAINTAINERS | 1 +
board/Marvell/octeontx2_cn913x/README | 24 ++
cmd/mvebu/Kconfig | 9 +-
cmd/mvebu/Makefile | 2 +-
cmd/mvebu/{rx_training.c => comphy_rx_training.c} | 10 +-
configs/mvebu_db_cn9130_defconfig | 89 ++++++
configs/x530_defconfig | 2 +-
drivers/net/mvpp2.c | 257 +++++++++++-------
drivers/pci/pcie_dw_mvebu.c | 37 ++-
drivers/spi/kirkwood_spi.c | 67 ++++-
include/phy_interface.h | 4 +
24 files changed, 1413 insertions(+), 181 deletions(-)
create mode 100644 arch/arm/dts/cn9130-db-A.dts
create mode 100644 arch/arm/dts/cn9130-db-B.dts
create mode 100644 arch/arm/dts/cn9130-db-dev-info.dtsi
create mode 100644 arch/arm/dts/cn9130-db.dtsi
create mode 100644 arch/arm/dts/cn9131-db-A.dts
create mode 100644 arch/arm/dts/cn9131-db-B.dts
create mode 100644 arch/arm/dts/cn9131-db.dtsi
create mode 100644 arch/arm/dts/cn9132-db-A.dts
create mode 100644 arch/arm/dts/cn9132-db-B.dts
create mode 100644 arch/arm/dts/cn9132-db.dtsi
create mode 100644 arch/arm/mach-mvebu/include/mach/fw_info.h
create mode 100644 board/Marvell/octeontx2_cn913x/README
rename cmd/mvebu/{rx_training.c => comphy_rx_training.c} (74%)
create mode 100644 configs/mvebu_db_cn9130_defconfig
next reply other threads:[~2021-05-13 10:21 UTC|newest]
Thread overview: 190+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-13 10:21 Stefan Roese [this message]
2021-05-13 15:37 ` Please pull u-boot-marvell/master Tom Rini
2021-05-15 8:03 ` Stefan Roese
2021-05-15 12:07 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2024-04-04 12:08 Stefan Roese
2024-04-06 0:42 ` Tom Rini
2024-03-05 10:35 Stefan Roese
2024-03-05 13:27 ` Tom Rini
2024-01-22 15:46 Stefan Roese
2024-01-22 16:00 ` Tom Rini
2024-01-10 14:47 Stefan Roese
2024-01-10 15:46 ` Tom Rini
2023-10-27 6:51 Stefan Roese
2023-10-28 0:50 ` Tom Rini
2023-10-20 12:51 Stefan Roese
2023-10-20 14:45 ` Tom Rini
2023-10-20 16:44 ` Stefan Roese
2023-10-20 16:54 ` Tom Rini
2023-10-20 16:55 ` Tom Rini
2023-10-16 14:50 Stefan Roese
2023-10-16 21:32 ` Tom Rini
2023-08-01 9:17 Stefan Roese
2023-08-01 15:57 ` Tom Rini
2023-07-13 14:03 Stefan Roese
2023-07-14 16:04 ` Tom Rini
2023-05-08 8:47 Stefan Roese
2023-05-08 17:39 ` Tom Rini
2023-05-03 9:18 Stefan Roese
2023-05-03 17:14 ` Tom Rini
2023-04-14 6:09 Stefan Roese
2023-04-15 5:07 ` Tom Rini
2023-03-06 11:52 Stefan Roese
2023-03-06 20:12 ` Tom Rini
2023-02-13 14:01 Stefan Roese
2023-02-13 16:28 ` Tom Rini
2023-01-26 9:26 Stefan Roese
2023-01-26 17:08 ` Tom Rini
2023-01-17 11:49 Stefan Roese
2023-01-17 13:20 ` Tom Rini
2023-01-02 10:49 Stefan Roese
2023-01-02 14:36 ` Tom Rini
2022-12-12 8:57 Stefan Roese
2022-12-12 15:43 ` Tom Rini
2022-11-07 8:24 Stefan Roese
2022-11-07 15:13 ` Tom Rini
2022-10-06 10:47 Stefan Roese
2022-10-06 14:25 ` Tom Rini
2022-09-26 11:59 Stefan Roese
2022-09-26 14:00 ` Tom Rini
2022-09-18 12:00 Stefan Roese
2022-09-18 12:34 ` Tom Rini
2022-09-13 10:26 Stefan Roese
2022-09-13 13:49 ` Tom Rini
2022-08-23 15:09 Stefan Roese
2022-08-24 13:52 ` Tom Rini
2022-08-09 11:43 Stefan Roese
2022-08-09 16:33 ` Tom Rini
2022-07-29 12:05 Stefan Roese
2022-07-29 14:31 ` Tom Rini
2022-07-21 12:28 Stefan Roese
2022-07-21 17:40 ` Tom Rini
2022-05-17 7:57 Stefan Roese
2022-05-18 23:52 ` Tom Rini
2022-05-04 9:26 Stefan Roese
2022-05-04 15:41 ` Tom Rini
2022-05-02 15:53 Stefan Roese
2022-05-03 15:06 ` Tom Rini
2022-04-21 14:18 Stefan Roese
2022-04-21 18:24 ` Tom Rini
2022-03-24 16:42 Stefan Roese
2022-03-24 21:23 ` Tom Rini
2022-03-16 9:52 Stefan Roese
2022-03-16 14:48 ` Tom Rini
2022-03-14 15:23 Stefan Roese
2022-03-14 16:19 ` Tom Rini
2022-03-04 12:27 Stefan Roese
2022-03-04 18:12 ` Tom Rini
2022-02-17 15:46 Stefan Roese
2022-02-17 18:56 ` Tom Rini
2022-02-10 8:21 Stefan Roese
2022-02-10 14:01 ` Tom Rini
2022-01-31 11:37 Stefan Roese
2022-01-31 15:21 ` Tom Rini
2022-01-20 16:31 Stefan Roese
2022-01-20 18:48 ` Tom Rini
2022-01-14 15:42 Stefan Roese
2022-01-14 17:26 ` Tom Rini
2022-01-05 17:27 Stefan Roese
2022-01-05 19:24 ` Tom Rini
2021-12-15 10:58 Stefan Roese
2021-12-15 13:39 ` Tom Rini
2021-11-30 13:42 Stefan Roese
2021-11-30 16:54 ` Tom Rini
2021-11-10 13:52 Stefan Roese
2021-11-10 19:11 ` Tom Rini
2021-11-03 7:49 Stefan Roese
2021-11-03 14:44 ` Tom Rini
2021-10-28 10:50 Stefan Roese
2021-10-28 14:47 ` Tom Rini
2021-10-21 7:53 Stefan Roese
2021-10-21 14:16 ` Tom Rini
2021-10-08 9:23 Stefan Roese
2021-10-08 13:56 ` Tom Rini
2021-09-29 7:47 Stefan Roese
2021-09-29 22:28 ` Tom Rini
2021-09-27 10:58 Stefan Roese
2021-09-27 12:52 ` Tom Rini
2021-09-10 12:05 Stefan Roese
2021-09-10 17:57 ` Tom Rini
2021-09-01 9:24 Stefan Roese
2021-09-01 14:12 ` Tom Rini
2021-08-11 8:30 Stefan Roese
2021-08-11 15:50 ` Tom Rini
2021-07-31 10:04 Stefan Roese
2021-08-01 3:28 ` Tom Rini
2021-08-01 5:26 ` Stefan Roese
2021-08-01 10:46 ` Pali Rohár
2021-08-01 14:33 ` Tom Rini
2021-08-01 14:46 ` Pali Rohár
2021-07-19 12:37 Stefan Roese
2021-07-19 20:44 ` Tom Rini
2021-07-15 10:36 Stefan Roese
2021-07-15 18:48 ` Tom Rini
2021-07-09 5:19 Stefan Roese
2021-07-10 1:08 ` Tom Rini
2021-06-15 8:11 Stefan Roese
2021-06-16 3:16 ` Tom Rini
2021-06-10 7:55 Stefan Roese
2021-06-10 17:27 ` Tom Rini
2021-06-04 13:15 Stefan Roese
2021-06-05 3:09 ` Tom Rini
2021-05-20 13:39 Stefan Roese
2021-05-21 14:07 ` Tom Rini
2021-04-29 6:47 Stefan Roese
2021-04-29 15:30 ` Tom Rini
2021-04-08 8:57 Stefan Roese
2021-04-08 19:35 ` Tom Rini
2021-03-12 9:02 Stefan Roese
2021-03-12 15:17 ` Tom Rini
2021-02-26 11:14 Stefan Roese
2021-02-26 17:40 ` Tom Rini
2021-02-08 11:41 Stefan Roese
2021-02-08 20:42 ` Tom Rini
2021-01-27 16:02 Stefan Roese
2021-01-27 19:22 ` Tom Rini
2020-12-28 10:40 Stefan Roese
2020-12-28 15:31 ` Tom Rini
2020-12-07 11:18 Stefan Roese
2020-12-07 22:09 ` Tom Rini
2020-10-29 14:31 Stefan Roese
2020-10-30 18:46 ` Tom Rini
2020-10-16 13:40 Stefan Roese
2020-10-16 22:02 ` Tom Rini
2020-10-14 8:19 Stefan Roese
2020-10-15 0:03 ` Tom Rini
2020-10-01 12:41 Stefan Roese
2020-10-01 22:10 ` Tom Rini
2020-09-24 10:40 Stefan Roese
2020-09-25 16:54 ` Tom Rini
2020-09-04 14:04 Stefan Roese
2020-09-04 16:49 ` Tom Rini
2020-08-31 13:12 Stefan Roese
2020-08-31 16:50 ` Tom Rini
2020-08-25 13:20 Stefan Roese
2020-08-26 1:22 ` Tom Rini
2020-08-13 12:24 Stefan Roese
2020-08-13 14:51 ` Tom Rini
2020-08-06 14:33 Stefan Roese
2020-08-06 18:28 ` Tom Rini
2020-08-08 14:42 ` Tom Rini
2020-07-09 8:42 Stefan Roese
2020-07-09 13:54 ` Tom Rini
2020-05-27 7:09 Stefan Roese
2020-05-27 15:59 ` Tom Rini
2020-05-04 6:54 Stefan Roese
2020-05-04 17:54 ` Tom Rini
2020-04-22 14:48 Stefan Roese
2020-04-22 18:34 ` Tom Rini
2020-04-23 5:04 ` Stefan Roese
2020-04-23 14:17 ` Joel Johnson
2020-04-14 11:28 Stefan Roese
2020-04-14 23:25 ` Tom Rini
2020-01-21 13:03 Stefan Roese
2020-01-21 13:11 ` Tom Rini
2020-01-21 13:19 ` Stefan Roese
2020-01-21 13:31 ` Baruch Siach
2020-01-21 13:32 ` Tom Rini
2020-01-21 13:33 ` Stefan Roese
2020-01-16 14:34 Stefan Roese
2020-01-16 21:02 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e9e253b1-9a7b-d648-8459-45cee65ef204@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.