From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kever Yang Date: Tue, 28 Apr 2020 22:02:58 +0800 Subject: [PATCH 4/5] arm: dts: rockchip: Add initial DT for Pinebook Pro In-Reply-To: <20200420192736.962307-5-pbrobinson@gmail.com> References: <20200420192736.962307-1-pbrobinson@gmail.com> <20200420192736.962307-5-pbrobinson@gmail.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 2020/4/21 ??3:27, Peter Robinson wrote: > Sync initial support for Pinebook Pro device tree from Linux 5.7-rc1. > > Signed-off-by: Peter Robinson Reviewed-by: Kever Yang Thanks, - Kever > --- > arch/arm/dts/Makefile | 1 + > arch/arm/dts/rk3399-pinebook-pro.dts | 1096 ++++++++++++++++++++++++++ > 2 files changed, 1097 insertions(+) > create mode 100644 arch/arm/dts/rk3399-pinebook-pro.dts > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 820ee9733a..885bf0ef58 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -125,6 +125,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ > rk3399-nanopi-m4.dtb \ > rk3399-nanopi-neo4.dtb \ > rk3399-orangepi.dtb \ > + rk3399-pinebook-pro.dtb \ > rk3399-puma-ddr1333.dtb \ > rk3399-puma-ddr1600.dtb \ > rk3399-puma-ddr1866.dtb \ > diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts > new file mode 100644 > index 0000000000..294d21bf45 > --- /dev/null > +++ b/arch/arm/dts/rk3399-pinebook-pro.dts > @@ -0,0 +1,1096 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > + * Copyright (c) 2018 Akash Gajjar > + * Copyright (c) 2020 Tobias Schramm > + */ > + > +/dts-v1/; > +#include > +#include > +#include > +#include > +#include > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + model = "Pine64 Pinebook Pro"; > + compatible = "pine64,pinebook-pro", "rockchip,rk3399"; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + backlight: edp-backlight { > + compatible = "pwm-backlight"; > + power-supply = <&vcc_12v>; > + pwms = <&pwm0 0 740740 0>; > + }; > + > + edp_panel: edp-panel { > + compatible = "boe,nv140fhmn49"; > + backlight = <&backlight>; > + enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&panel_en_gpio>; > + power-supply = <&vcc3v3_panel>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port at 0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel_in_edp: endpoint at 0 { > + reg = <0>; > + remote-endpoint = <&edp_out_panel>; > + }; > + }; > + }; > + }; > + > + /* > + * Use separate nodes for gpio-keys to allow for selective deactivation > + * of wakeup sources via sysfs without disabling the whole key > + */ > + gpio-key-lid { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&lidbtn_gpio>; > + > + lid { > + debounce-interval = <20>; > + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; > + label = "Lid"; > + linux,code = ; > + linux,input-type = ; > + wakeup-event-action = ; > + wakeup-source; > + }; > + }; > + > + gpio-key-power { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwrbtn_gpio>; > + > + power { > + debounce-interval = <20>; > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > + label = "Power"; > + linux,code = ; > + wakeup-source; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwrled_gpio &slpled_gpio>; > + > + green-led { > + color = ; > + default-state = "on"; > + function = LED_FUNCTION_POWER; > + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > + label = "green:power"; > + }; > + > + red-led { > + color = ; > + default-state = "off"; > + function = LED_FUNCTION_STANDBY; > + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; > + label = "red:standby"; > + panic-indicator; > + retain-state-suspended; > + }; > + }; > + > + /* Power sequence for SDIO WiFi module */ > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk808 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_enable_h_gpio>; > + post-power-on-delay-ms = <100>; > + power-off-delay-us = <500000>; > + > + /* WL_REG_ON on module */ > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > + }; > + > + /* Audio components */ > + es8316-sound { > + compatible = "simple-audio-card"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hp_det_gpio>; > + simple-audio-card,name = "rockchip,es8316-codec"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,mclk-fs = <256>; > + > + simple-audio-card,widgets = > + "Microphone", "Mic Jack", > + "Headphone", "Headphones", > + "Speaker", "Speaker"; > + simple-audio-card,routing = > + "MIC1", "Mic Jack", > + "Headphones", "HPOL", > + "Headphones", "HPOR", > + "Speaker Amplifier INL", "HPOL", > + "Speaker Amplifier INR", "HPOR", > + "Speaker", "Speaker Amplifier OUTL", > + "Speaker", "Speaker Amplifier OUTR"; > + > + simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; > + simple-audio-card,aux-devs = <&speaker_amp>; > + simple-audio-card,pin-switches = "Speaker"; > + > + simple-audio-card,cpu { > + sound-dai = <&i2s1>; > + }; > + > + simple-audio-card,codec { > + sound-dai = <&es8316>; > + }; > + }; > + > + speaker_amp: speaker-amplifier { > + compatible = "simple-audio-amplifier"; > + enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; > + sound-name-prefix = "Speaker Amplifier"; > + VCC-supply = <&pa_5v>; > + }; > + > + /* Power tree */ > + /* Root power source */ > + vcc_sysin: vcc-sysin { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_sysin"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + /* Regulators supplied by vcc_sysin */ > + /* LCD backlight supply */ > + vcc_12v: vcc-12v { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_12v"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + vin-supply = <&vcc_sysin>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* Main 3.3 V supply */ > + vcc3v3_sys: wifi_bat: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc_sysin>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + /* 5 V USB power supply */ > + vcc5v0_usb: pa_5v: vcc5v0-usb-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwr_5v_gpio>; > + regulator-name = "vcc5v0_usb"; > + regulator-always-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc_sysin>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* RK3399 logic supply */ > + vdd_log: vdd-log { > + compatible = "pwm-regulator"; > + pwms = <&pwm2 0 25000 1>; > + regulator-name = "vdd_log"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + vin-supply = <&vcc_sysin>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + /* Regulators supplied by vcc3v3_sys */ > + /* 0.9 V supply, always on */ > + vcc_0v9: vcc-0v9 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_0v9"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + vin-supply = <&vcc3v3_sys>; > + }; > + > + /* S3 1.8 V supply, switched by vcc1v8_s3 */ > + vcca1v8_s3: vcc1v8-s3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcca1v8_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc3v3_sys>; > + }; > + > + /* micro SD card power */ > + vcc3v0_sd: vcc3v0-sd { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc0_pwr_h_gpio>; > + regulator-name = "vcc3v0_sd"; > + regulator-always-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + vin-supply = <&vcc3v3_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* LCD panel power, called VCC3V3_S0 in schematic */ > + vcc3v3_panel: vcc3v3-panel { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&lcdvcc_en_gpio>; > + regulator-name = "vcc3v3_panel"; > + regulator-always-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-enable-ramp-delay = <100000>; > + vin-supply = <&vcc3v3_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* M.2 adapter power, switched by vcc1v8_s3 */ > + vcc3v3_ssd: vcc3v3-ssd { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_ssd"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc3v3_sys>; > + }; > + > + /* Regulators supplied by vcc5v0_usb */ > + /* USB 3 port power supply regulator */ > + vcc5v0_otg: vcc5v0-otg { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en_gpio>; > + regulator-name = "vcc5v0_otg"; > + regulator-always-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_usb>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* Regulators supplied by vcc5v0_usb */ > + /* Type C port power supply regulator */ > + vbus_5vout: vbus_typec: vbus-5vout { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_typec0_en_gpio>; > + regulator-name = "vbus_5vout"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc5v0_usb>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + /* Regulators supplied by vcc_1v8 */ > + /* Primary 0.9 V LDO */ > + vcca0v9_s3: vcca0v9-s3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc0v9_s3"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc_1v8>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + mains_charger: dc-charger { > + compatible = "gpio-charger"; > + charger-type = "mains"; > + gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>; > + > + /* Also triggered by USB charger */ > + pinctrl-names = "default"; > + pinctrl-0 = <&dc_det_gpio>; > + }; > +}; > + > +&cdn_dp { > + status = "okay"; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&edp { > + force-hpd; > + pinctrl-names = "default"; > + pinctrl-0 = <&edp_hpd>; > + status = "okay"; > + > + ports { > + edp_out: port at 1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + edp_out_panel: endpoint at 0 { > + reg = <0>; > + remote-endpoint = <&panel_in_edp>; > + }; > + }; > + }; > +}; > + > +&emmc_phy { > + status = "okay"; > +}; > + > +&gpu { > + mali-supply = <&vdd_gpu>; > + status = "okay"; > +}; > + > +&hdmi_sound { > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + i2c-scl-falling-time-ns = <4>; > + i2c-scl-rising-time-ns = <168>; > + status = "okay"; > + > + rk808: pmic at 1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + #clock-cells = <1>; > + clock-output-names = "xin32k", "rk808-clkout2"; > + interrupt-parent = <&gpio3>; > + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l_gpio>; > + rockchip,system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc_sysin>; > + vcc2-supply = <&vcc_sysin>; > + vcc3-supply = <&vcc_sysin>; > + vcc4-supply = <&vcc_sysin>; > + vcc6-supply = <&vcc_sysin>; > + vcc7-supply = <&vcc_sysin>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc_sysin>; > + vcc10-supply = <&vcc_sysin>; > + vcc11-supply = <&vcc_sysin>; > + vcc12-supply = <&vcc3v3_sys>; > + vcc13-supply = <&vcc_sysin>; > + vcc14-supply = <&vcc_sysin>; > + > + regulators { > + /* rk3399 center logic supply */ > + vdd_center: DCDC_REG1 { > + regulator-name = "vdd_center"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_l: DCDC_REG2 { > + regulator-name = "vdd_cpu_l"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_1v8: vcc_wl: DCDC_REG4 { > + regulator-name = "vcc_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + /* not used */ > + LDO_REG1 { > + }; > + > + /* not used */ > + LDO_REG2 { > + }; > + > + vcc1v8_pmupll: LDO_REG3 { > + regulator-name = "vcc1v8_pmupll"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_sdio: LDO_REG4 { > + regulator-name = "vcc_sdio"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3000000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcca3v0_codec: LDO_REG5 { > + regulator-name = "vcca3v0_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v5: LDO_REG6 { > + regulator-name = "vcc_1v5"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1500000>; > + }; > + }; > + > + vcca1v8_codec: LDO_REG7 { > + regulator-name = "vcca1v8_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v0: LDO_REG8 { > + regulator-name = "vcc_3v0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc3v3_s3: SWITCH_REG1 { > + regulator-name = "vcc3v3_s3"; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_s0: SWITCH_REG2 { > + regulator-name = "vcc3v3_s0"; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > + > + vdd_cpu_b: regulator at 40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vsel1_gpio>; > + regulator-name = "vdd_cpu_b"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + vin-supply = <&vcc_1v8>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: regulator at 41 { > + compatible = "silergy,syr828"; > + reg = <0x41>; > + fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vsel2_gpio>; > + regulator-name = "vdd_gpu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + vin-supply = <&vcc_1v8>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + i2c-scl-falling-time-ns = <4>; > + i2c-scl-rising-time-ns = <168>; > + status = "okay"; > + > + es8316: es8316 at 11 { > + compatible = "everest,es8316"; > + reg = <0x11>; > + clocks = <&cru SCLK_I2S_8CH_OUT>; > + clock-names = "mclk"; > + #sound-dai-cells = <0>; > + }; > +}; > + > +&i2c3 { > + i2c-scl-falling-time-ns = <15>; > + i2c-scl-rising-time-ns = <450>; > + status = "okay"; > +}; > + > +&i2c4 { > + i2c-scl-falling-time-ns = <20>; > + i2c-scl-rising-time-ns = <600>; > + status = "okay"; > + > + fusb0: fusb30x at 22 { > + compatible = "fcs,fusb302"; > + reg = <0x22>; > + fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&fusb0_int_gpio>; > + vbus-supply = <&vbus_typec>; > + > + connector { > + compatible = "usb-c-connector"; > + data-role = "host"; > + label = "USB-C"; > + op-sink-microwatt = <1000000>; > + power-role = "dual"; > + sink-pdos = > + ; > + source-pdos = > + ; > + try-power-role = "sink"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port at 0 { > + reg = <0>; > + > + usbc_hs: endpoint { > + remote-endpoint = > + <&u2phy0_typec_hs>; > + }; > + }; > + > + port at 1 { > + reg = <1>; > + > + usbc_ss: endpoint { > + remote-endpoint = > + <&tcphy0_typec_ss>; > + }; > + }; > + > + port at 2 { > + reg = <2>; > + > + usbc_dp: endpoint { > + remote-endpoint = > + <&tcphy0_typec_dp>; > + }; > + }; > + }; > + }; > + }; > +}; > + > +&i2s1 { > + #sound-dai-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>; > + rockchip,capture-channels = <8>; > + rockchip,playback-channels = <8>; > + status = "okay"; > +}; > + > +&io_domains { > + audio-supply = <&vcc_3v0>; > + gpio1830-supply = <&vcc_3v0>; > + sdmmc-supply = <&vcc_sdio>; > + status = "okay"; > +}; > + > +&pcie_phy { > + status = "okay"; > +}; > + > +&pcie0 { > + bus-scan-delay-ms = <1000>; > + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; > + max-link-speed = <2>; > + num-lanes = <4>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_clkreqn_cpm>; > + vpcie0v9-supply = <&vcca0v9_s3>; > + vpcie1v8-supply = <&vcca1v8_s3>; > + vpcie3v3-supply = <&vcc3v3_ssd>; > + status = "okay"; > +}; > + > +&pinctrl { > + buttons { > + pwrbtn_gpio: pwrbtn-gpio { > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + lidbtn_gpio: lidbtn-gpio { > + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + dc-charger { > + dc_det_gpio: dc-det-gpio { > + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + es8316 { > + hp_det_gpio: hp-det-gpio { > + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + fusb302x { > + fusb0_int_gpio: fusb0-int-gpio { > + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + i2s1 { > + i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio { > + rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; > + }; > + }; > + > + lcd-panel { > + lcdvcc_en_gpio: lcdvcc-en-gpio { > + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + panel_en_gpio: panel-en-gpio { > + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + lcd_panel_reset_gpio: lcd-panel-reset-gpio { > + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + leds { > + pwrled_gpio: pwrled_gpio { > + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + slpled_gpio: slpled_gpio { > + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pmic { > + pmic_int_l_gpio: pmic-int-l-gpio { > + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + vsel1_gpio: vsel1-gpio { > + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + vsel2_gpio: vsel2-gpio { > + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + sdcard { > + sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio { > + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + }; > + > + sdio-pwrseq { > + wifi_enable_h_gpio: wifi-enable-h-gpio { > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb-typec { > + vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio { > + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + usb2 { > + pwr_5v_gpio: pwr-5v-gpio { > + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + vcc5v0_host_en_gpio: vcc5v0-host-en-gpio { > + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + wireless-bluetooth { > + bt_wake_gpio: bt-wake-gpio { > + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + bt_host_wake_gpio: bt-host-wake-gpio { > + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + bt_reset_gpio: bt-reset-gpio { > + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pmu_io_domains { > + pmu1830-supply = <&vcc_3v0>; > + status = "okay"; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwm2 { > + status = "okay"; > +}; > + > +&saradc { > + vref-supply = <&vcca1v8_s3>; > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; > + disable-wp; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; > + sd-uhs-sdr104; > + vmmc-supply = <&vcc3v0_sd>; > + vqmmc-supply = <&vcc_sdio>; > + status = "okay"; > +}; > + > +&sdio0 { > + bus-width = <4>; > + cap-sd-highspeed; > + cap-sdio-irq; > + keep-power-in-suspend; > + mmc-pwrseq = <&sdio_pwrseq>; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; > + sd-uhs-sdr104; > + status = "okay"; > +}; > + > +&sdhci { > + bus-width = <8>; > + mmc-hs200-1_8v; > + non-removable; > + status = "okay"; > +}; > + > +&spi1 { > + max-freq = <10000000>; > + status = "okay"; > + > + spiflash: flash at 0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + m25p,fast-read; > + spi-max-frequency = <10000000>; > + }; > +}; > + > +&tcphy0 { > + status = "okay"; > +}; > + > +&tcphy0_dp { > + port { > + tcphy0_typec_dp: endpoint { > + remote-endpoint = <&usbc_dp>; > + }; > + }; > +}; > + > +&tcphy0_usb3 { > + port { > + tcphy0_typec_ss: endpoint { > + remote-endpoint = <&usbc_ss>; > + }; > + }; > +}; > + > +&tcphy1 { > + status = "okay"; > +}; > + > +&tsadc { > + /* tshut mode 0:CRU 1:GPIO */ > + rockchip,hw-tshut-mode = <1>; > + /* tshut polarity 0:LOW 1:HIGH */ > + rockchip,hw-tshut-polarity = <1>; > + status = "okay"; > +}; > + > +&u2phy0 { > + status = "okay"; > + > + u2phy0_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy0_host: host-port { > + phy-supply = <&vcc5v0_otg>; > + status = "okay"; > + }; > + > + port { > + u2phy0_typec_hs: endpoint { > + remote-endpoint = <&usbc_hs>; > + }; > + }; > +}; > + > +&u2phy1 { > + status = "okay"; > + > + u2phy1_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy1_host: host-port { > + phy-supply = <&vcc5v0_otg>; > + status = "okay"; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; > + uart-has-rtscts; > + status = "okay"; > + > + bluetooth { > + compatible = "brcm,bcm4345c5"; > + clocks = <&rk808 1>; > + clock-names = "lpo"; > + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; > + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; > + max-speed = <1500000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>; > + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; > + vbat-supply = <&wifi_bat>; > + vddio-supply = <&vcc_wl>; > + }; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > + > +&usbdrd3_0 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_0 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&usbdrd3_1 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&vopb { > + status = "okay"; > +}; > + > +&vopb_mmu { > + status = "okay"; > +}; > + > +&vopl { > + status = "okay"; > +}; > + > +&vopl_mmu { > + status = "okay"; > +};