From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heinrich Schuchardt Date: Sun, 23 Jun 2019 16:04:53 +0200 Subject: [U-Boot] [PATCH 7/7] wandboard: README: Adjust the U-Boot proper binary name In-Reply-To: <20190612153441.19020-7-festevam@gmail.com> References: <20190612153441.19020-1-festevam@gmail.com> <20190612153441.19020-7-festevam@gmail.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 6/12/19 5:34 PM, Fabio Estevam wrote: > After the conversion to DM the U-Boot proper binary name > is 'u-boot-dtb.img', so adjust it accordingly. > > Signed-off-by: Fabio Estevam > --- > board/wandboard/README | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/wandboard/README b/board/wandboard/README > index e5170bcc81..f84f205337 100644 > --- a/board/wandboard/README > +++ b/board/wandboard/README > @@ -29,7 +29,7 @@ $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync > > - Flash the u-boot.img image into the SD card: > > -sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync > +sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync With U-Boot HEAD I cannot see any difference between the files: $ md5sum u-boot*.bin 56a64c916b79c012759ad430a52fb2c1 u-boot.bin 56a64c916b79c012759ad430a52fb2c1 u-boot-dtb.bin ed69f924f0cb4b9415d0bed27f896be3 u-boot-nodtb.bin So is this just a formal change? Best regards Heinrich > > - Insert the SD card into the slot located in the bottom of the board (same side > as the mx6 processor) >