[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Tom,

please pull from u-boot-imx, thanks! Series with patch causing warning:

Hannu Lounento (5):
      net: e1000: add support for writing to EEPROM

is dropped from PR until issues will be fixed. This caused a rebasing of
my tree.


The following changes since commit 48a346061d1f0a7eff566f6a7cc7eeeba7efb1e2:

  Merge git://git.denx.de/u-boot-x86 (2017-12-21 09:54:10 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d6abd1d53992cf863019aed1251924c45893a46b:

  arm: imx: add tzic interrupt controller for imx53 (2017-12-29 11:18:59
+0100)

----------------------------------------------------------------
Adam Ford (1):
      mx6_common: remove dead code

Breno Lima (5):
      mx6slevk: imximage.cfg: Handle the CONFIG_SECURE_BOOT case
      warp: imximage.cfg: Handle the CONFIG_SECURE_BOOT case
      mx6sl: Select MX6SL option via Kconfig
      Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL
      imx: Kconfig: Add HAS_CAAM option

Christopher Spinrath (4):
      ARM: imx: cm-fx6: reinstate USB support by syncing the devicetree
with Linux
      ARM: imx: cm_fx6: defconfig: enable CONFIG_DM_KEYBOARD
      ARM: imx: cm_fx6: remove sata init code from board file
      ARM: imx: cm_fx6: remove esdhc init code from board file

Fabio Estevam (3):
      imx: Unify CONFIG_BOOTDELAY
      imx: Add a common way for detecting NXP boards revision
      mx6sxsabresd: Load the correct dtb for revA board

Lukasz Majewski (1):
      ARM: imx: display5: config: Update display5_factory_defconfig to
use USE_BOOTCOMMAND

Marek Vasut (1):
      ARM: imx6: Disable DDR DRAM calibration DHCOM i.MX6 PDK

Martyn Welch (1):
      board: ge: mx53ppd: Move check_time() to common location


Vagrant Cascadian (1):
      imx: Fix missing spl_sd configuration for wandboard.

 arch/arm/dts/imx53.dtsi                     |   8 +++
 arch/arm/dts/imx6q-cm-fx6.dts               | 396
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------
 arch/arm/include/asm/mach-imx/sys_proto.h   |   3 ++
 arch/arm/mach-imx/Kconfig                   |  13 ++++-
 arch/arm/mach-imx/cpu.c                     |  25 +++++++++
 arch/arm/mach-imx/mx6/Kconfig               |  13 ++++-
 arch/arm/mach-imx/mx7/Kconfig               |   1 +
 board/compulab/cm_fx6/cm_fx6.c              |  71 -------------------------
 board/dhelectronics/dh_imx6/dh_imx6_spl.c   |   4 --
 board/freescale/mx6sabreauto/mx6sabreauto.c |  47 +---------------
 board/freescale/mx6slevk/imximage.cfg       |   9 ++++
 board/freescale/mx6sxsabresd/mx6sxsabresd.c |  16 +++++-
 board/ge/common/Makefile                    |   2 +-
 board/ge/common/ge_common.c                 |  55 +++++++++++++++++++
 board/ge/common/ge_common.h                 |   7 +++
 board/ge/mx53ppd/mx53ppd.c                  |  47 +---------------
 board/warp/imximage.cfg                     |   9 ++++
 configs/cm_fx6_defconfig                    |   1 +
 configs/display5_factory_defconfig          |   2 +
 configs/mx23evk_defconfig                   |   1 -
 configs/mx25pdk_defconfig                   |   1 -
 configs/mx28evk_auart_console_defconfig     |   1 -
 configs/mx28evk_defconfig                   |   1 -
 configs/mx28evk_nand_defconfig              |   1 -
 configs/mx28evk_spi_defconfig               |   1 -
 configs/mx31ads_defconfig                   |   1 -
 configs/mx31pdk_defconfig                   |   1 -
 configs/mx35pdk_defconfig                   |   1 -
 configs/mx51evk_defconfig                   |   1 -
 configs/mx53ard_defconfig                   |   1 -
 configs/mx53evk_defconfig                   |   1 -
 configs/mx53loco_defconfig                  |   1 -
 configs/mx53smd_defconfig                   |   1 -
 configs/mx6sabreauto_defconfig              |   2 +-
 configs/mx6sabresd_defconfig                |   1 -
 configs/mx6slevk_defconfig                  |   3 +-
 configs/mx6slevk_spinor_defconfig           |   3 +-
 configs/mx6slevk_spl_defconfig              |   3 +-
 configs/mx6sllevk_defconfig                 |   1 -
 configs/mx6sllevk_plugin_defconfig          |   1 -
 configs/mx6sxsabreauto_defconfig            |   1 -
 configs/mx6sxsabresd_defconfig              |   2 +-
 configs/mx6sxsabresd_spl_defconfig          |   2 +-
 configs/mx6ul_14x14_evk_defconfig           |   1 -
 configs/mx6ul_9x9_evk_defconfig             |   1 -
 configs/mx6ull_14x14_evk_defconfig          |   1 -
 configs/mx6ull_14x14_evk_plugin_defconfig   |   1 -
 configs/mx7dsabresd_defconfig               |   1 -
 configs/mx7dsabresd_secure_defconfig        |   1 -
 configs/wandboard_defconfig                 |   1 +
 configs/warp_defconfig                      |   2 +-
 include/configs/mx6_common.h                |   3 --
 include/configs/mx6sxsabresd.h              |   8 ++-
 include/power/pmic.h                        |   1 +
 54 files changed, 520 insertions(+), 263 deletions(-)
 create mode 100644 board/ge/common/ge_common.c
 create mode 100644 board/ge/common/ge_common.h


Best regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================