From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Thu, 23 Nov 2017 15:55:46 +0100 Subject: [U-Boot] [PATCH 0/5] mmc: fixes for HS200/UHS core support In-Reply-To: References: <1511277188-2923-1-git-send-email-jjhiblot@ti.com> <0e6e5c8f-447f-ae07-1f1c-ebc8ba133220@samsung.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11/23/2017 03:52 PM, Jean-Jacques Hiblot wrote: > > > On 22/11/2017 15:00, Marek Vasut wrote: >> On 11/22/2017 01:09 PM, Jaehoon Chung wrote: >>> On 11/22/2017 12:13 AM, Jean-Jacques Hiblot wrote: >>>> This series applies on top of "[PATCH v2 00/26] mmc: Add support for >>>> HS200 >>>> and UHS modes" >>>> >>>> It fixes a bug with old SD and MMC cards that support only the >>>> legacy mode. >>>> It also addresses the comments made on the mailing list: >>>> * dump card and host capabilities in debug mode >>>> * use 1-bit if the DTS property 'bus-width' is not present. >>>> * recognize the "mmc-ddr-1_2v" and "mmc-hs200-1_2v" DTS properties >>>> >>>> Tested on DRA7, DRA72 and AM335x >>> Thanks for sending patches. After testing with my boards, will update. >>> For your patches, i made the testing-uhs-supporting branch on >>> u-boot-mmc. >>> >>> At least, i will share the result about testing with my boards. >> Any chance this UHS support will make it into this release finally ? > I hope so too. Jaehoon, do you need some help with the testing? what > would you need? It's been tested on 3 different HW platforms and controllers already, so I really fail to see much of a reason to drag this on. If something is botched on samsung controller, that can always be fixed later. >> It's been dragging on for like half a year already ... >> > > -- Best regards, Marek Vasut