[U-Boot] [ANN] U-Boot v2017.05-rc2 released

["Andreas Färber" <afaerber@suse.de>]

Am 21.04.2017 um 02:34 schrieb Andreas Färber:
> Hi Simon,
> 
> Am 21.04.2017 um 01:44 schrieb Simon Glass:
>> On 20 April 2017 at 17:23, Andreas Färber <afaerber@suse.de> wrote:
>>> Using -rc2 with firefly-rk3288 defconfig I can only boot into SPL but
>>> not into full U-Boot. I am using the old documented way of dd'ing to
>>> sector 256 on SD (doc/README.rockchip).
>>>
>>> Looking at include/configs/rk3288_common.h I also tried putting
>>> u-boot.img on a FAT partition, to no effect.
>>>
>>> v2017.03 doesn't even show SPL working.
>>> v2017.01 worked okay.
>>>
>>> Build log for -rc2:
>>> https://build.opensuse.org/build/Base:System:Staging/openSUSE_Factory_ARM/armv7l/u-boot-firefly-rk3288/_log
>>
>> Can you try removing RETURN_TO_BROM (or imilsar) and adding
>> CONFIG_SPL_OF_PLATDATA?
> 
> As an interim update I can share that latest master behaves slightly
> differently:
> 
> U-Boot SPL 2017.05-rc2-00053-g3c476d8 (Apr 21 2017 - 02:29:48)
> Returning to boot ROM...
> 
> compared to:
> 
> U-Boot SPL 2017.05-rc2 (Apr 20 2017 - 14:33:20)

Disabling the ROCKCHIP_SPL_BACK_TO_BROM option I get:

U-Boot SPL 2017.05-rc2-00053-g3c476d8 (Apr 21 2017 - 02:38:52)
SPL: Unsupported Boot Device!
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

If I additionally enable SPL_OF_PLATDATA then I am back to the v2017.03
state of no serial output.

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)