From mboxrd@z Thu Jan 1 00:00:00 1970 From: Amit Kucheria Subject: [PATCH v6 3/7] dt: qcom: 8996: thermal: Move to DT initialisation Date: Mon, 9 Jul 2018 17:13:25 +0530 Message-ID: References: Return-path: In-Reply-To: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org, bjorn.andersson@linaro.org, edubezval@gmail.com, smohanad@codeaurora.org, vivek.gautam@codeaurora.org, andy.gross@linaro.org, David Brown , Rob Herring , Mark Rutland , Catalin Marinas , Will Deacon , linux-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: linux-arm-msm@vger.kernel.org We also split up the regmap address space into two, one for the TM registers, the other for the SROT registers. This was required to deal with different address offsets for the TM and SROT registers across different SoC families. Since tsens-common.c/init_common() currently only registers one address space, the order is important (TM before SROT). This is OK since the code doesn't really use the SROT functionality yet. Signed-off-by: Amit Kucheria --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 8c7f9ca..6c8a857 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -461,7 +461,17 @@ tsens0: thermal-sensor@4a8000 { compatible = "qcom,msm8996-tsens"; - reg = <0x4a8000 0x2000>; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@4ac000 { + compatible = "qcom,msm8996-tsens"; + reg = <0x4ad000 0x1000>, /* TM */ + <0x4ac000 0x1000>; /* SROT */ + #qcom,sensors = <8>; #thermal-sensor-cells = <1>; }; -- 2.7.4 From mboxrd@z Thu Jan 1 00:00:00 1970 From: amit.kucheria@linaro.org (Amit Kucheria) Date: Mon, 9 Jul 2018 17:13:25 +0530 Subject: [PATCH v6 3/7] dt: qcom: 8996: thermal: Move to DT initialisation In-Reply-To: References: Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org We also split up the regmap address space into two, one for the TM registers, the other for the SROT registers. This was required to deal with different address offsets for the TM and SROT registers across different SoC families. Since tsens-common.c/init_common() currently only registers one address space, the order is important (TM before SROT). This is OK since the code doesn't really use the SROT functionality yet. Signed-off-by: Amit Kucheria --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 8c7f9ca..6c8a857 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -461,7 +461,17 @@ tsens0: thermal-sensor at 4a8000 { compatible = "qcom,msm8996-tsens"; - reg = <0x4a8000 0x2000>; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor at 4ac000 { + compatible = "qcom,msm8996-tsens"; + reg = <0x4ad000 0x1000>, /* TM */ + <0x4ac000 0x1000>; /* SROT */ + #qcom,sensors = <8>; #thermal-sensor-cells = <1>; }; -- 2.7.4