Am 26.01.23 um 19:24 schrieb Rayyan Ansari:
> Parse the width-mm and height-mm devicetree properties of the panel node,
> and use this to set the DRM Display Mode instead of calculating it
> based on a hardcoded DPI.
> 
> Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>

> ---
>   drivers/gpu/drm/tiny/simpledrm.c | 32 +++++++++++++++++++++++---------
>   1 file changed, 23 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
> index 162eb44dcba8..f8b18441cfcb 100644
> --- a/drivers/gpu/drm/tiny/simpledrm.c
> +++ b/drivers/gpu/drm/tiny/simpledrm.c
> @@ -599,16 +599,12 @@ static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = {
>    */
>   
>   static struct drm_display_mode simpledrm_mode(unsigned int width,
> -					      unsigned int height)
> +					      unsigned int height,
> +					      unsigned int width_mm,
> +					      unsigned int height_mm)
>   {
> -	/*
> -	 * Assume a monitor resolution of 96 dpi to
> -	 * get a somewhat reasonable screen size.
> -	 */
>   	const struct drm_display_mode mode = {
> -		DRM_MODE_INIT(60, width, height,
> -			      DRM_MODE_RES_MM(width, 96ul),
> -			      DRM_MODE_RES_MM(height, 96ul))
> +		DRM_MODE_INIT(60, width, height, width_mm, height_mm)
>   	};
>   
>   	return mode;
> @@ -622,6 +618,8 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,
>   	struct simpledrm_device *sdev;
>   	struct drm_device *dev;
>   	int width, height, stride;
> +	int width_mm = 0, height_mm = 0;
> +	struct device_node *panel_node;
>   	const struct drm_format_info *format;
>   	struct resource *res, *mem;
>   	void __iomem *screen_base;
> @@ -676,6 +674,13 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,
>   		format = simplefb_get_format_of(dev, of_node);
>   		if (IS_ERR(format))
>   			return ERR_CAST(format);
> +
> +		panel_node = of_parse_phandle(of_node, "panel", 0);
> +		if (panel_node) {
> +			simplefb_read_u32_of(dev, panel_node, "width-mm", &width_mm);
> +			simplefb_read_u32_of(dev, panel_node, "height-mm", &height_mm);
> +			of_node_put(panel_node);
> +		}
>   	} else {
>   		drm_err(dev, "no simplefb configuration found\n");
>   		return ERR_PTR(-ENODEV);
> @@ -686,7 +691,16 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,
>   			return ERR_PTR(-EINVAL);
>   	}
>   
> -	sdev->mode = simpledrm_mode(width, height);
> +	/*
> +	 * Assume a monitor resolution of 96 dpi if physical dimensions
> +	 * are not specified to get a somewhat reasonable screen size.
> +	 */
> +	if (!width_mm)
> +		width_mm = DRM_MODE_RES_MM(width, 96ul);
> +	if (!height_mm)
> +		height_mm = DRM_MODE_RES_MM(height, 96ul);
> +
> +	sdev->mode = simpledrm_mode(width, height, width_mm, height_mm);
>   	sdev->format = format;
>   	sdev->pitch = stride;
>   

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Ivo Totev