From mboxrd@z Thu Jan  1 00:00:00 1970
From: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Date: Wed, 10 Feb 2010 10:23:18 +0530
Subject: [U-Boot] [PATCH 3/3] SAMSUNG: SMDKC100: Adds ethernet support.
In-Reply-To: <f8328f7c1002090652w6852883dub6f0236a249a1753@mail.gmail.com>
References: <1265707341-25956-1-git-send-email-ch.naveen@samsung.com> 
	<1265708302-15743-1-git-send-email-ch.naveen@samsung.com> 
	<f8328f7c1002090652w6852883dub6f0236a249a1753@mail.gmail.com>
Message-ID: <ef0d8a251002092053s67b44c2cvf7c3063925fad36d@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Ben,

I think you wanted me to remove the CONFIG_BOOTP_* macros.
But the gmail is showing some other code under ur comments.

Any how i wil remove the CONFIG_BOOTP_* macros and submit a
V2 version of the patch.

On 9 February 2010 20:22, Ben Warren <biggerbadderben@gmail.com> wrote:

> Naveen,
>
> On Tue, Feb 9, 2010 at 1:38 AM, Naveen Krishna Ch <ch.naveen@samsung.com
> >wrote:
>
> > From: Naveen Krishna CH <ch.naveen@samsung.com>
> >
> > Add setup for ethernet on SMDKC100, allowing kernel/ramdisk to be
> > loaded over tftp.
> >
> > The preinit function will configure GPIO (GPK0CON) & SROMC to look
> > for environment in SROM Bank 3.
> >
> > Signed-off-by: Naveen Krishna Ch <ch.naveen <at> samsung.com>
> > ---
> >  board/samsung/smdkc100/smdkc100.c |   37
> > +++++++++++++++++++++++++++++++++++++
> >  include/configs/smdkc100.h        |   30 +++++++++++++++++++++++++++++-
> >  2 files changed, 66 insertions(+), 1 deletions(-)
> >
> > diff --git a/board/samsung/smdkc100/smdkc100.c
> > b/board/samsung/smdkc100/smdkc100.c
> > index 15a1a27..6e50f14 100644
> > --- a/board/samsung/smdkc100/smdkc100.c
> > +++ b/board/samsung/smdkc100/smdkc100.c
> > @@ -23,10 +23,38 @@
> >  */
> >
> >  #include <common.h>
> > +#include <asm/io.h>
> > +#include <asm/arch/mem.h>
> > +
> > +#define GPK0CON_OFFSET          0x2A0
> > +#define GPK0CON                 (S5PC100_GPIO_BASE + GPK0CON_OFFSET)
> > +
> >  DECLARE_GLOBAL_DATA_PTR;
> >
> > +/*
> > + * Miscellaneous platform dependent initialisations
> > + */
> > +static void smc9115_pre_init(void)
> > +{
> > +       u32 tmp;
> > +       u32 smc_bw_conf;
> > +
> > +       /* gpio configuration */
> > +       tmp = __raw_readl(GPK0CON);
> > +       tmp &= ~(0xf << CONFIG_ENV_SROM_BANK * 4);
> > +       tmp |=  (0x2 << CONFIG_ENV_SROM_BANK * 4);
> > +       __raw_writel(tmp, GPK0CON);
> > +
> > +       /* Ethernet needs bus width of 16 bits */
> > +       smc_bw_conf = SROM_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
> > +
> > +       /* Select and configure the SROMC bank */
> > +       config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, SMC_BC_X_CON);
> > +}
> > +
> >  int board_init(void)
> >  {
> > +       smc9115_pre_init();
> >        gd->bd->bi_arch_number = MACH_TYPE_SMDKC100;
> >        gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> >
> > @@ -49,3 +77,12 @@ int checkboard(void)
> >        return 0;
> >  }
> >  #endif
> > +
> > +int board_eth_init(bd_t *bis)
> > +{
> > +       int rc = 0;
> > +#ifdef CONFIG_SMC911X
> > +       rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
> > +#endif
> > +       return rc;
> > +}
> > diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
> > index a8ba052..3de9da1 100644
> > --- a/include/configs/smdkc100.h
> > +++ b/include/configs/smdkc100.h
> > @@ -83,7 +83,7 @@
> >  #undef CONFIG_CMD_FLASH
> >  #undef CONFIG_CMD_IMLS
> >  #undef CONFIG_CMD_NAND
> > -#undef CONFIG_CMD_NET
> > +#define CONFIG_CMD_NET         /* bootp, tftpboot, rarpboot */
> >
> >  #define CONFIG_CMD_CACHE
> >  #define CONFIG_CMD_REGINFO
> > @@ -235,4 +235,32 @@
> >
> >  #define CONFIG_DOS_PARTITION           1
> >
>
> +/*
> > + * BOOTP options
> > + */
> > +#define CONFIG_BOOTP_SUBNETMASK
> > +#define CONFIG_BOOTP_GATEWAY
> > +#define CONFIG_BOOTP_HOSTNAME
> > +#define CONFIG_BOOTP_BOOTPATH
> > +
> > +/*
> > + * Net Configurations
> > + */
> > +#define CONFIG_ETHADDR          00 : 40 : 5c : 26 : 0a : 5b
> > +#define CONFIG_NETMASK          255.255.255.0
> > +#define CONFIG_IPADDR           192.168.0.20
> > +#define CONFIG_SERVERIP         192.168.0.10
> > +#define CONFIG_GATEWAYIP        192.168.0.1
> > +
> >
> Please remove all of these.  If you don't know why, search the archives.
>  It's only been discussed 10000 times or so.
>
I think you want me to remove macros starting from CONFIG_BOOTP_* macros
till CONFIG_GATWAYIP

>
> > +/*
> > + * Ethernet Contoller driver
> > + */
> > +#ifdef CONFIG_CMD_NET
> > +#define CONFIG_NET_MULTI
> > +#define CONFIG_SMC911X         1       /* we have a SMC9115 on-board
> */
> > +#define CONFIG_SMC911X_16_BIT  1       /* SMC911X_16_BIT Mode
>  */
> > +#define CONFIG_SMC911X_BASE    0x98800300      /* SMC911X Drive Base
> */
> > +#define CONFIG_ENV_SROM_BANK   3       /* Select SROM Bank-3 for
> > Ethernet*/
> > +#endif /* CONFIG_CMD_NET */
> > +
> >  #endif /* __CONFIG_H */
>
This is code is needed to enable the ethernet driver and tftp command.

Thank You Ben,

>  >
> regards,
> Ben
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>


-- 
Shine bright,
(: Naveen Krishna Ch :)