All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Aiuto <fabioaiuto83@gmail.com>
To: gregkh@linuxfoundation.org
Cc: hdegoede@redhat.com, Larry.Finger@lwfinger.net,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH 8/8] staging: rtl8723bs: remove two unused files from tree
Date: Tue, 15 Jun 2021 13:45:38 +0200	[thread overview]
Message-ID: <ef7c21270ccaa2ee3d48b93d0a16fa55911c6cce.1623756906.git.fabioaiuto83@gmail.com> (raw)
In-Reply-To: <cover.1623756906.git.fabioaiuto83@gmail.com>

remove unused files from tree, for they are excluded
by the build process.

Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
---
 drivers/staging/rtl8723bs/core/rtw_eeprom.c  | 208 -------------------
 drivers/staging/rtl8723bs/include/drv_conf.h |  18 --
 2 files changed, 226 deletions(-)
 delete mode 100644 drivers/staging/rtl8723bs/core/rtw_eeprom.c
 delete mode 100644 drivers/staging/rtl8723bs/include/drv_conf.h

diff --git a/drivers/staging/rtl8723bs/core/rtw_eeprom.c b/drivers/staging/rtl8723bs/core/rtw_eeprom.c
deleted file mode 100644
index 4dcee4d2e513..000000000000
--- a/drivers/staging/rtl8723bs/core/rtw_eeprom.c
+++ /dev/null
@@ -1,208 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-#include <drv_conf.h>
-#include <osdep_service.h>
-#include <drv_types.h>
-
-void up_clk(_adapter *padapter,	 u16 *x)
-{
-_func_enter_;
-	*x = *x | _EESK;
-	rtw_write8(padapter, EE_9346CR, (u8)*x);
-	udelay(CLOCK_RATE);
-
-_func_exit_;
-
-}
-
-void down_clk(_adapter *padapter, u16 *x)
-{
-_func_enter_;
-	*x = *x & ~_EESK;
-	rtw_write8(padapter, EE_9346CR, (u8)*x);
-	udelay(CLOCK_RATE);
-_func_exit_;
-}
-
-void shift_out_bits(_adapter *padapter, u16 data, u16 count)
-{
-	u16 x, mask;
-_func_enter_;
-
-	if (padapter->bSurpriseRemoved)
-		goto out;
-
-	mask = 0x01 << (count - 1);
-	x = rtw_read8(padapter, EE_9346CR);
-
-	x &= ~(_EEDO | _EEDI);
-
-	do {
-		x &= ~_EEDI;
-		if (data & mask)
-			x |= _EEDI;
-		if (padapter->bSurpriseRemoved)
-			goto out;
-
-		rtw_write8(padapter, EE_9346CR, (u8)x);
-		udelay(CLOCK_RATE);
-		up_clk(padapter, &x);
-		down_clk(padapter, &x);
-		mask = mask >> 1;
-	} while (mask);
-	if (padapter->bSurpriseRemoved)
-		goto out;
-
-	x &= ~_EEDI;
-	rtw_write8(padapter, EE_9346CR, (u8)x);
-out:
-_func_exit_;
-}
-
-u16 shift_in_bits(_adapter *padapter)
-{
-	u16 x, d = 0, i;
-_func_enter_;
-	if (padapter->bSurpriseRemoved)
-		goto out;
-
-	x = rtw_read8(padapter, EE_9346CR);
-
-	x &= ~(_EEDO | _EEDI);
-	d = 0;
-
-	for (i = 0; i < 16; i++) {
-		d = d << 1;
-		up_clk(padapter, &x);
-	if (padapter->bSurpriseRemoved)
-		goto out;
-
-		x = rtw_read8(padapter, EE_9346CR);
-
-		x &= ~(_EEDI);
-		if (x & _EEDO)
-		d |= 1;
-
-		down_clk(padapter, &x);
-	}
-out:
-_func_exit_;
-
-	return d;
-}
-
-void standby(_adapter *padapter)
-{
-	u8   x;
-_func_enter_;
-	x = rtw_read8(padapter, EE_9346CR);
-
-	x &= ~(_EECS | _EESK);
-	rtw_write8(padapter, EE_9346CR, x);
-
-	udelay(CLOCK_RATE);
-	x |= _EECS;
-	rtw_write8(padapter, EE_9346CR, x);
-	udelay(CLOCK_RATE);
-_func_exit_;
-}
-
-void eeprom_clean(_adapter *padapter)
-{
-	u16 x;
-_func_enter_;
-	if (padapter->bSurpriseRemoved)
-		goto out;
-
-	x = rtw_read8(padapter, EE_9346CR);
-	if (padapter->bSurpriseRemoved)
-		goto out;
-
-	x &= ~(_EECS | _EEDI);
-	rtw_write8(padapter, EE_9346CR, (u8)x);
-	if (padapter->bSurpriseRemoved)
-		goto out;
-
-	up_clk(padapter, &x);
-	if (padapter->bSurpriseRemoved)
-		goto out;
-
-	down_clk(padapter, &x);
-out:
-_func_exit_;
-}
-
-u16 eeprom_read16(_adapter *padapter, u16 reg) /*ReadEEprom*/
-{
-
-	u16 x;
-	u16 data = 0;
-
-_func_enter_;
-
-	if (padapter->bSurpriseRemoved)
-		goto out;
-
-	/* select EEPROM, reset bits, set _EECS*/
-	x = rtw_read8(padapter, EE_9346CR);
-
-	if (padapter->bSurpriseRemoved)
-		goto out;
-
-	x &= ~(_EEDI | _EEDO | _EESK | _EEM0);
-	x |= _EEM1 | _EECS;
-	rtw_write8(padapter, EE_9346CR, (unsigned char)x);
-
-	/* write the read opcode and register number in that order*/
-	/* The opcode is 3bits in length, reg is 6 bits long*/
-	shift_out_bits(padapter, EEPROM_READ_OPCODE, 3);
-	shift_out_bits(padapter, reg, padapter->EepromAddressSize);
-
-	/* Now read the data (16 bits) in from the selected EEPROM word*/
-	data = shift_in_bits(padapter);
-
-	eeprom_clean(padapter);
-out:
-_func_exit_;
-	return data;
-
-
-}
-
-/*addr_off : address offset of the entry in eeprom (not the tuple number of eeprom (reg); that is addr_off !=reg)*/
-u8 eeprom_read(_adapter *padapter, u32 addr_off, u8 sz, u8 *rbuf)
-{
-	u8 quotient, remainder, addr_2align_odd;
-	u16 reg, stmp, i = 0, idx = 0;
-_func_enter_;
-	reg = (u16)(addr_off >> 1);
-	addr_2align_odd = (u8)(addr_off & 0x1);
-
-	/*read that start at high part: e.g  1,3,5,7,9,...*/
-	if (addr_2align_odd) {
-		stmp = eeprom_read16(padapter, reg);
-		rbuf[idx++] = (u8) ((stmp>>8)&0xff); /*return hogh-part of the short*/
-		reg++; sz--;
-	}
-
-	quotient = sz >> 1;
-	remainder = sz & 0x1;
-
-	for (i = 0; i < quotient; i++) {
-		stmp = eeprom_read16(padapter, reg+i);
-		rbuf[idx++] = (u8) (stmp&0xff);
-		rbuf[idx++] = (u8) ((stmp>>8)&0xff);
-	}
-
-	reg = reg+i;
-	if (remainder) { /*end of read at lower part of short : 0,2,4,6,...*/
-		stmp = eeprom_read16(padapter, reg);
-		rbuf[idx] = (u8)(stmp & 0xff);
-	}
-_func_exit_;
-	return true;
-}
diff --git a/drivers/staging/rtl8723bs/include/drv_conf.h b/drivers/staging/rtl8723bs/include/drv_conf.h
deleted file mode 100644
index 9e8c37b29a7f..000000000000
--- a/drivers/staging/rtl8723bs/include/drv_conf.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-#ifndef __DRV_CONF_H__
-#define __DRV_CONF_H__
-
-#define DYNAMIC_CAMID_ALLOC
-
-#ifndef CONFIG_RTW_HIQ_FILTER
-	#define CONFIG_RTW_HIQ_FILTER 1
-#endif
-
-//#include <rtl871x_byteorder.h>
-
-#endif // __DRV_CONF_H__
-- 
2.20.1


  parent reply	other threads:[~2021-06-15 11:45 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-15 11:45 [PATCH 0/8] staging: rtl8723bs: remove unneeded files from tree Fabio Aiuto
2021-06-15 11:45 ` [PATCH 1/8] staging: rtl8723bs: remove unused debug macro Fabio Aiuto
2021-06-15 11:45 ` [PATCH 2/8] staging: rtl8723bs: remove unneeded comments Fabio Aiuto
2021-06-15 11:45 ` [PATCH 3/8] staging: rtl8723bs: remove unused WAKEUP_GPIO_IDX macro definition Fabio Aiuto
2021-06-15 11:45 ` [PATCH 4/8] staging: rtl8723bs: remove unneeded DISABLE_BB_RF macro Fabio Aiuto
2021-06-15 11:45 ` [PATCH 5/8] staging: rtl8723bs: remove HAL_{BB,MAC,RF,FW}_ENABLE macros Fabio Aiuto
2021-06-15 11:45 ` [PATCH 6/8] staging: rtl8723bs: move LPS_RPWM_WAIT_MS macro Fabio Aiuto
2021-06-15 13:23   ` Greg KH
2021-06-15 11:45 ` [PATCH 7/8] staging: rtl8723bs: remove include/autoconf.h header file from tree Fabio Aiuto
2021-06-15 13:24   ` Greg KH
2021-06-15 14:14     ` Fabio Aiuto
2021-06-15 11:45 ` Fabio Aiuto [this message]
2021-06-15 12:11 ` [PATCH 0/8] staging: rtl8723bs: remove unneeded files " Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ef7c21270ccaa2ee3d48b93d0a16fa55911c6cce.1623756906.git.fabioaiuto83@gmail.com \
    --to=fabioaiuto83@gmail.com \
    --cc=Larry.Finger@lwfinger.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.