Re: [PATCH v8 06/13] arm64: dts: freescale: Add i.MX8DXL evk board support

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 19/04/2022 13:35, Abel Vesa wrote:
> From: Jacky Bai <ping.bai@nxp.com>
> 
> Add i.MX8DXL EVK board support.
> 

Thank you for your patch. There is something to discuss/improve.
(...)

> +		/* global autoconfigured region for contiguous allocations */
> +		linux,cma {
> +			compatible = "shared-dma-pool";
> +			reusable;
> +			size = <0 0x14000000>;
> +			alloc-ranges = <0 0x98000000 0 0x14000000>;
> +			linux,cma-default;
> +		};
> +	};
> +
> +	reg_usdhc2_vmmc: usdhc2-vmmc {

usdhc2-vmmc-regulator or regulator-0

(...)

> +&thermal_zones {
> +	pmic-thermal0 {

Are you sure this passes the dtbs_check?

> +		polling-delay-passive = <250>;
> +		polling-delay = <2000>;
> +		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
> +

(...)

> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
> +			IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
> +			IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
> +			IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
> +			IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
> +			IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
> +			IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
> +			IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
> +			IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
> +			IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
> +			IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {

and this as well... I don't remember if we have schema for this but even
without it, it breaks the convention. See other files.


Best regards,
Krzysztof