From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from msg-1.mailo.com (msg-1.mailo.com [213.182.54.11]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E551F71 for ; Wed, 21 Apr 2021 16:56:33 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=mailo.com; s=mailo; t=1619024174; bh=YtetIt89bMCwEpcMWwCQXjKo4GvGKm7xUuJcwpbES5k=; h=X-EA-Auth:Date:From:To:Cc:Subject:Message-ID:References: MIME-Version:Content-Type:In-Reply-To; b=M/fESto5OP1RiQ4bKc9xU11IgO2u4S208FDjQSowzlofFZ1J4F9nszYNuC39wCDbZ j09iydqSIECvJsdjr41Oj4aEpVKUl4AErUGx0DKAvnC6tgzd6RBUVwlGbPHwgIgFtP abffySiU0LjLHhtFXAioW3c0Hds9MChKgEa0WoY4= Received: by 192.168.90.14 [192.168.90.14] with ESMTP via ip-206.mailobj.net [213.182.55.206] Wed, 21 Apr 2021 18:56:14 +0200 (CEST) X-EA-Auth: ItxAaoHD8A/gZo95ABEI5NtQiNtPRagRGj18W9RVxzZf+9c1hDH41hanHIHU0OnNyJL5KqYPEGUwVvbGqtrt3+tsy93WdvoW Date: Wed, 21 Apr 2021 22:26:09 +0530 From: Deepak R Varma To: Mauro Carvalho Chehab , Sakari Ailus , Greg Kroah-Hartman Cc: linux-media@vger.kernel.org, linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org, mh12gx2825@gmail.com, drv@mailo.com Subject: [PATCH v1 4/6] staging: media: atomisp: reformat code comment blocks Message-ID: References: X-Mailing-List: linux-staging@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: Reformat code comment blocks according to the coding style guidelines. This resolves different checkpatch script WARNINGs around block comments. Signed-off-by: Deepak R Varma --- Changes in v1: - implement following changes suggested by Fabio Aiuto a. Corrected commenting style b. Similar style implemented for other comment blocks in the same files. .../media/atomisp/i2c/atomisp-gc2235.c | 19 ++++---- .../atomisp/i2c/atomisp-libmsrlisthelper.c | 6 ++- .../media/atomisp/i2c/atomisp-mt9m114.c | 46 +++++++++++-------- .../media/atomisp/i2c/atomisp-ov2680.c | 20 +++++--- 4 files changed, 56 insertions(+), 35 deletions(-) diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c index 548c572d3b57..6ee6e8414f0e 100644 --- a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c +++ b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c @@ -228,7 +228,7 @@ static int gc2235_g_focal(struct v4l2_subdev *sd, s32 *val) static int gc2235_g_fnumber(struct v4l2_subdev *sd, s32 *val) { - /*const f number for imx*/ + /* const f number for imx */ *val = (GC2235_F_NUMBER_DEFAULT_NUM << 16) | GC2235_F_NUMBER_DEM; return 0; } @@ -427,7 +427,8 @@ static long gc2235_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) return 0; } -/* This returns the exposure time being used. This should only be used +/* + * This returns the exposure time being used. This should only be used * for filling in EXIF data, not for actual image processing. */ static int gc2235_q_exposure(struct v4l2_subdev *sd, s32 *value) @@ -746,11 +747,12 @@ static int startup(struct v4l2_subdev *sd) int ret = 0; if (is_init == 0) { - /* force gc2235 to do a reset in res change, otherwise it - * can not output normal after switching res. and it is not - * necessary for first time run up after power on, for the sack - * of performance - */ + /* + * force gc2235 to do a reset in res change, otherwise it + * can not output normal after switching res. and it is not + * necessary for first time run up after power on, for the sack + * of performance + */ power_down(sd); power_up(sd); gc2235_write_reg_array(client, gc2235_init_settings); @@ -904,7 +906,8 @@ static int gc2235_s_config(struct v4l2_subdev *sd, (struct camera_sensor_platform_data *)platform_data; mutex_lock(&dev->input_lock); - /* power off the module, then power on it in future + /* + * power off the module, then power on it in future * as first power on by board may not fulfill the * power on sequqence needed by the module */ diff --git a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c index b93c80471f22..7a20d918a9d5 100644 --- a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c +++ b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c @@ -50,14 +50,16 @@ struct tbd_data_record_header { static int set_msr_configuration(struct i2c_client *client, uint8_t *bufptr, unsigned int size) { - /* The configuration data contains any number of sequences where + /* + * The configuration data contains any number of sequences where * the first byte (that is, uint8_t) that marks the number of bytes * in the sequence to follow, is indeed followed by the indicated * number of bytes of actual data to be written to sensor. * By convention, the first two bytes of actual data should be * understood as an address in the sensor address space (hibyte * followed by lobyte) where the remaining data in the sequence - * will be written. */ + * will be written. + */ u8 *ptr = bufptr; diff --git a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c index 465fc4468442..f314e5fed9cb 100644 --- a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c +++ b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c @@ -475,10 +475,12 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag) if (!dev || !dev->platform_data) return -ENODEV; - /* Note: current modules wire only one GPIO signal (RESET#), + /* + * Note: current modules wire only one GPIO signal (RESET#), * but the schematic wires up two to the connector. BIOS * versions have been unfortunately inconsistent with which - * ACPI index RESET# is on, so hit both */ + * ACPI index RESET# is on, so hit both + */ if (flag) { ret = dev->platform_data->gpio0_ctrl(sd, 0); @@ -560,7 +562,7 @@ static int power_down(struct v4l2_subdev *sd) if (ret) dev_err(&client->dev, "vprog failed.\n"); - /*according to DS, 20ms is needed after power down*/ + /* according to DS, 20ms is needed after power down */ msleep(20); return ret; @@ -947,7 +949,7 @@ static int mt9m114_g_focal(struct v4l2_subdev *sd, s32 *val) static int mt9m114_g_fnumber(struct v4l2_subdev *sd, s32 *val) { - /*const f number for mt9m114*/ + /* const f number for mt9m114 */ *val = (MT9M114_F_NUMBER_DEFAULT_NUM << 16) | MT9M114_F_NUMBER_DEM; return 0; } @@ -1014,13 +1016,13 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd, AnalogGain = exposure->gain[0]; DigitalGain = exposure->gain[1]; if (!dev->streamon) { - /*Save the first exposure values while stream is off*/ + /* Save the first exposure values while stream is off */ dev->first_exp = coarse_integration; dev->first_gain = AnalogGain; dev->first_diggain = DigitalGain; } - /* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) + - ((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8); */ + /* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) + */ + /* ((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8); */ /* set frame length */ if (FLines < coarse_integration + 6) @@ -1034,8 +1036,10 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd, } /* set coarse integration */ - /* 3A provide real exposure time. - should not translate to any value here. */ + /* + * 3A provide real exposure time. + * should not translate to any value here. + */ ret = mt9m114_write_reg(client, MISENSOR_16BIT, REG_EXPO_COARSE, (u16)(coarse_integration)); if (ret) { @@ -1044,7 +1048,7 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd, } /* - // set analog/digital gain + * set analog/digital gain switch(AnalogGain) { case 0: @@ -1069,8 +1073,10 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd, */ if (DigitalGain >= 16 || DigitalGain <= 1) DigitalGain = 1; - /* AnalogGainToWrite = - (u16)((DigitalGain << 12) | AnalogGainToWrite); */ + + /* + * AnalogGainToWrite = (u16)((DigitalGain << 12) | AnalogGainToWrite); + */ AnalogGainToWrite = (u16)((DigitalGain << 12) | (u16)AnalogGain); ret = mt9m114_write_reg(client, MISENSOR_16BIT, REG_GAIN, AnalogGainToWrite); @@ -1095,8 +1101,10 @@ static long mt9m114_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) return 0; } -/* This returns the exposure time being used. This should only be used - for filling in EXIF data, not for actual image processing. */ +/* + * This returns the exposure time being used. This should only be used + * for filling in EXIF data, not for actual image processing. + */ static int mt9m114_g_exposure(struct v4l2_subdev *sd, s32 *value) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -1247,7 +1255,8 @@ static int mt9m114_s_ev(struct v4l2_subdev *sd, s32 val) s32 luma = 0x37; int err; - /* EV value only support -2 to 2 + /* + * EV value only support -2 to 2 * 0: 0x37, 1:0x47, 2:0x57, -1:0x27, -2:0x17 */ if (val < -2 || val > 2) @@ -1295,9 +1304,10 @@ static int mt9m114_g_ev(struct v4l2_subdev *sd, s32 *val) return 0; } -/* Fake interface +/* + * Fake interface * mt9m114 now can not support 3a_lock -*/ + */ static int mt9m114_s_3a_lock(struct v4l2_subdev *sd, s32 val) { aaalock = val; @@ -1843,7 +1853,7 @@ static int mt9m114_probe(struct i2c_client *client) return ret; } - /*TODO add format code here*/ + /* TODO add format code here */ dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; dev->pad.flags = MEDIA_PAD_FL_SOURCE; dev->format.code = MEDIA_BUS_FMT_SGRBG10_1X10; diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c index c17615149f46..4571f4328b80 100644 --- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c +++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c @@ -127,7 +127,7 @@ static int ov2680_g_focal(struct v4l2_subdev *sd, s32 *val) static int ov2680_g_fnumber(struct v4l2_subdev *sd, s32 *val) { - /*const f number for ov2680*/ + /* const f number for ov2680 */ *val = (OV2680_F_NUMBER_DEFAULT_NUM << 16) | OV2680_F_NUMBER_DEM; return 0; @@ -399,7 +399,8 @@ static long ov2680_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) return 0; } -/* This returns the exposure time being used. This should only be used +/* + * This returns the exposure time being used. This should only be used * for filling in EXIF data, not for actual image processing. */ static int ov2680_q_exposure(struct v4l2_subdev *sd, s32 *value) @@ -728,11 +729,13 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag) if (!dev || !dev->platform_data) return -ENODEV; - /* The OV2680 documents only one GPIO input (#XSHUTDN), but + /* + * The OV2680 documents only one GPIO input (#XSHUTDN), but * existing integrations often wire two (reset/power_down) * because that is the way other sensors work. There is no * way to tell how it is wired internally, so existing - * firmwares expose both and we drive them symmetrically. */ + * firmwares expose both and we drive them symmetrically. + */ if (flag) { ret = dev->platform_data->gpio0_ctrl(sd, 1); usleep_range(10000, 15000); @@ -978,7 +981,8 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd, goto err; } - /*recall flip functions to avoid flip registers + /* + * recall flip functions to avoid flip registers * were overridden by default setting */ if (h_flag) @@ -988,7 +992,8 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd, v4l2_info(client, "\n%s idx %d\n", __func__, dev->fmt_idx); - /*ret = startup(sd); + /* + * ret = startup(sd); * if (ret) * dev_err(&client->dev, "ov2680 startup err\n"); */ @@ -1097,7 +1102,8 @@ static int ov2680_s_config(struct v4l2_subdev *sd, (struct camera_sensor_platform_data *)platform_data; mutex_lock(&dev->input_lock); - /* power off the module, then power on it in future + /* + * power off the module, then power on it in future * as first power on by board may not fulfill the * power on sequqence needed by the module */ -- 2.25.1 From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from msg-2.mailo.com (msg-2.mailo.com [213.182.54.12]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B6EAB71 for ; Wed, 21 Apr 2021 18:17:53 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=mailo.com; s=mailo; t=1619029063; bh=KFXV85gScAN4nFM43M90XZX2rg2dk28KoUjrXbDvPKs=; h=X-EA-Auth:Date:From:To:Cc:Subject:Message-ID:References: MIME-Version:Content-Type:In-Reply-To; b=h3Dcv9YPXZuOGTJZt56rcWdhsawkZ1h1Dl15alj7mEh/wFce4zGHJzcAU6lUnVYYx ptKfFvIicrLClMRug7o7C43wSlXDTYE7d9xrehOCyZ5s3yuBI/mPoVLwqGXr7As9DZ J/JgjXVUi0dHXejWiKkWA7t/paQ78K8wkL91d3TU= Received: by 192.168.90.14 [192.168.90.14] with ESMTP via ip-206.mailobj.net [213.182.55.206] Wed, 21 Apr 2021 20:17:43 +0200 (CEST) X-EA-Auth: XwiTVY6eaUMXdljMIMeCP1twuLvwSx4yR7wrciqIw3L7K4T2gOsYy7Tgd/kT4TDN7Q5OxP/vaY6S0CRM6ozOJYija9RRb3Zm Date: Wed, 21 Apr 2021 23:47:39 +0530 From: Deepak R Varma To: Mauro Carvalho Chehab , Sakari Ailus , Greg Kroah-Hartman Cc: linux-media@vger.kernel.org, linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org, mh12gx2825@gmail.com, drv@mailo.com Subject: [PATCH v3 4/6] staging: media: atomisp: reformat code comment blocks Message-ID: References: X-Mailing-List: linux-staging@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: Message-ID: <20210421181739.FljObRVB9NSgxbriU95tV7xxUJmKovqWMFikN27LQXA@z> Reformat code comment blocks according to the coding style guidelines. This resolves different checkpatch script WARNINGs around block comments. Suggested-by: Fabio Aiuto Signed-off-by: Deepak R Varma --- Changes since v2: - Tag Fabio Auito for the patch suggestion Changes in v1: - implement following changes suggested by Fabio Aiuto a. Corrected commenting style b. Similar style implemented for other comment blocks in the same files. .../media/atomisp/i2c/atomisp-gc2235.c | 19 ++++---- .../atomisp/i2c/atomisp-libmsrlisthelper.c | 6 ++- .../media/atomisp/i2c/atomisp-mt9m114.c | 46 +++++++++++-------- .../media/atomisp/i2c/atomisp-ov2680.c | 20 +++++--- 4 files changed, 56 insertions(+), 35 deletions(-) diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c index 548c572d3b57..6ee6e8414f0e 100644 --- a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c +++ b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c @@ -228,7 +228,7 @@ static int gc2235_g_focal(struct v4l2_subdev *sd, s32 *val) static int gc2235_g_fnumber(struct v4l2_subdev *sd, s32 *val) { - /*const f number for imx*/ + /* const f number for imx */ *val = (GC2235_F_NUMBER_DEFAULT_NUM << 16) | GC2235_F_NUMBER_DEM; return 0; } @@ -427,7 +427,8 @@ static long gc2235_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) return 0; } -/* This returns the exposure time being used. This should only be used +/* + * This returns the exposure time being used. This should only be used * for filling in EXIF data, not for actual image processing. */ static int gc2235_q_exposure(struct v4l2_subdev *sd, s32 *value) @@ -746,11 +747,12 @@ static int startup(struct v4l2_subdev *sd) int ret = 0; if (is_init == 0) { - /* force gc2235 to do a reset in res change, otherwise it - * can not output normal after switching res. and it is not - * necessary for first time run up after power on, for the sack - * of performance - */ + /* + * force gc2235 to do a reset in res change, otherwise it + * can not output normal after switching res. and it is not + * necessary for first time run up after power on, for the sack + * of performance + */ power_down(sd); power_up(sd); gc2235_write_reg_array(client, gc2235_init_settings); @@ -904,7 +906,8 @@ static int gc2235_s_config(struct v4l2_subdev *sd, (struct camera_sensor_platform_data *)platform_data; mutex_lock(&dev->input_lock); - /* power off the module, then power on it in future + /* + * power off the module, then power on it in future * as first power on by board may not fulfill the * power on sequqence needed by the module */ diff --git a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c index b93c80471f22..7a20d918a9d5 100644 --- a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c +++ b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c @@ -50,14 +50,16 @@ struct tbd_data_record_header { static int set_msr_configuration(struct i2c_client *client, uint8_t *bufptr, unsigned int size) { - /* The configuration data contains any number of sequences where + /* + * The configuration data contains any number of sequences where * the first byte (that is, uint8_t) that marks the number of bytes * in the sequence to follow, is indeed followed by the indicated * number of bytes of actual data to be written to sensor. * By convention, the first two bytes of actual data should be * understood as an address in the sensor address space (hibyte * followed by lobyte) where the remaining data in the sequence - * will be written. */ + * will be written. + */ u8 *ptr = bufptr; diff --git a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c index 465fc4468442..f314e5fed9cb 100644 --- a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c +++ b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c @@ -475,10 +475,12 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag) if (!dev || !dev->platform_data) return -ENODEV; - /* Note: current modules wire only one GPIO signal (RESET#), + /* + * Note: current modules wire only one GPIO signal (RESET#), * but the schematic wires up two to the connector. BIOS * versions have been unfortunately inconsistent with which - * ACPI index RESET# is on, so hit both */ + * ACPI index RESET# is on, so hit both + */ if (flag) { ret = dev->platform_data->gpio0_ctrl(sd, 0); @@ -560,7 +562,7 @@ static int power_down(struct v4l2_subdev *sd) if (ret) dev_err(&client->dev, "vprog failed.\n"); - /*according to DS, 20ms is needed after power down*/ + /* according to DS, 20ms is needed after power down */ msleep(20); return ret; @@ -947,7 +949,7 @@ static int mt9m114_g_focal(struct v4l2_subdev *sd, s32 *val) static int mt9m114_g_fnumber(struct v4l2_subdev *sd, s32 *val) { - /*const f number for mt9m114*/ + /* const f number for mt9m114 */ *val = (MT9M114_F_NUMBER_DEFAULT_NUM << 16) | MT9M114_F_NUMBER_DEM; return 0; } @@ -1014,13 +1016,13 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd, AnalogGain = exposure->gain[0]; DigitalGain = exposure->gain[1]; if (!dev->streamon) { - /*Save the first exposure values while stream is off*/ + /* Save the first exposure values while stream is off */ dev->first_exp = coarse_integration; dev->first_gain = AnalogGain; dev->first_diggain = DigitalGain; } - /* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) + - ((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8); */ + /* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) + */ + /* ((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8); */ /* set frame length */ if (FLines < coarse_integration + 6) @@ -1034,8 +1036,10 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd, } /* set coarse integration */ - /* 3A provide real exposure time. - should not translate to any value here. */ + /* + * 3A provide real exposure time. + * should not translate to any value here. + */ ret = mt9m114_write_reg(client, MISENSOR_16BIT, REG_EXPO_COARSE, (u16)(coarse_integration)); if (ret) { @@ -1044,7 +1048,7 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd, } /* - // set analog/digital gain + * set analog/digital gain switch(AnalogGain) { case 0: @@ -1069,8 +1073,10 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd, */ if (DigitalGain >= 16 || DigitalGain <= 1) DigitalGain = 1; - /* AnalogGainToWrite = - (u16)((DigitalGain << 12) | AnalogGainToWrite); */ + + /* + * AnalogGainToWrite = (u16)((DigitalGain << 12) | AnalogGainToWrite); + */ AnalogGainToWrite = (u16)((DigitalGain << 12) | (u16)AnalogGain); ret = mt9m114_write_reg(client, MISENSOR_16BIT, REG_GAIN, AnalogGainToWrite); @@ -1095,8 +1101,10 @@ static long mt9m114_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) return 0; } -/* This returns the exposure time being used. This should only be used - for filling in EXIF data, not for actual image processing. */ +/* + * This returns the exposure time being used. This should only be used + * for filling in EXIF data, not for actual image processing. + */ static int mt9m114_g_exposure(struct v4l2_subdev *sd, s32 *value) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -1247,7 +1255,8 @@ static int mt9m114_s_ev(struct v4l2_subdev *sd, s32 val) s32 luma = 0x37; int err; - /* EV value only support -2 to 2 + /* + * EV value only support -2 to 2 * 0: 0x37, 1:0x47, 2:0x57, -1:0x27, -2:0x17 */ if (val < -2 || val > 2) @@ -1295,9 +1304,10 @@ static int mt9m114_g_ev(struct v4l2_subdev *sd, s32 *val) return 0; } -/* Fake interface +/* + * Fake interface * mt9m114 now can not support 3a_lock -*/ + */ static int mt9m114_s_3a_lock(struct v4l2_subdev *sd, s32 val) { aaalock = val; @@ -1843,7 +1853,7 @@ static int mt9m114_probe(struct i2c_client *client) return ret; } - /*TODO add format code here*/ + /* TODO add format code here */ dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; dev->pad.flags = MEDIA_PAD_FL_SOURCE; dev->format.code = MEDIA_BUS_FMT_SGRBG10_1X10; diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c index c17615149f46..4571f4328b80 100644 --- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c +++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c @@ -127,7 +127,7 @@ static int ov2680_g_focal(struct v4l2_subdev *sd, s32 *val) static int ov2680_g_fnumber(struct v4l2_subdev *sd, s32 *val) { - /*const f number for ov2680*/ + /* const f number for ov2680 */ *val = (OV2680_F_NUMBER_DEFAULT_NUM << 16) | OV2680_F_NUMBER_DEM; return 0; @@ -399,7 +399,8 @@ static long ov2680_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) return 0; } -/* This returns the exposure time being used. This should only be used +/* + * This returns the exposure time being used. This should only be used * for filling in EXIF data, not for actual image processing. */ static int ov2680_q_exposure(struct v4l2_subdev *sd, s32 *value) @@ -728,11 +729,13 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag) if (!dev || !dev->platform_data) return -ENODEV; - /* The OV2680 documents only one GPIO input (#XSHUTDN), but + /* + * The OV2680 documents only one GPIO input (#XSHUTDN), but * existing integrations often wire two (reset/power_down) * because that is the way other sensors work. There is no * way to tell how it is wired internally, so existing - * firmwares expose both and we drive them symmetrically. */ + * firmwares expose both and we drive them symmetrically. + */ if (flag) { ret = dev->platform_data->gpio0_ctrl(sd, 1); usleep_range(10000, 15000); @@ -978,7 +981,8 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd, goto err; } - /*recall flip functions to avoid flip registers + /* + * recall flip functions to avoid flip registers * were overridden by default setting */ if (h_flag) @@ -988,7 +992,8 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd, v4l2_info(client, "\n%s idx %d\n", __func__, dev->fmt_idx); - /*ret = startup(sd); + /* + * ret = startup(sd); * if (ret) * dev_err(&client->dev, "ov2680 startup err\n"); */ @@ -1097,7 +1102,8 @@ static int ov2680_s_config(struct v4l2_subdev *sd, (struct camera_sensor_platform_data *)platform_data; mutex_lock(&dev->input_lock); - /* power off the module, then power on it in future + /* + * power off the module, then power on it in future * as first power on by board may not fulfill the * power on sequqence needed by the module */ -- 2.25.1