From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Wed, 23 Apr 2014 01:25:41 +0000 Subject: [PATCH 13/33] ARM: shmobile: lager: Set ethernet PHY LED mode Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org From: Laurent Pinchart The Lager board uses the ethernet PHY LED0 as a link signal connected to the ethernet controller. Specify the corresponding LED mode for the PHY. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index c3d8b17..a55c5f8 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -213,6 +213,7 @@ reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + led-mode = <1>; }; }; -- 1.8.5.2 From mboxrd@z Thu Jan 1 00:00:00 1970 From: horms+renesas@verge.net.au (Simon Horman) Date: Wed, 23 Apr 2014 10:25:41 +0900 Subject: [PATCH 13/33] ARM: shmobile: lager: Set ethernet PHY LED mode In-Reply-To: References: Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Laurent Pinchart The Lager board uses the ethernet PHY LED0 as a link signal connected to the ethernet controller. Specify the corresponding LED mode for the PHY. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index c3d8b17..a55c5f8 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -213,6 +213,7 @@ reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + led-mode = <1>; }; }; -- 1.8.5.2