All of lore.kernel.org
 help / color / mirror / Atom feed
From: Viresh Kumar <viresh.kumar@linaro.org>
To: arm@kernel.org, "Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>
Cc: linaro-kernel@lists.linaro.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	Rafael Wysocki <rjw@rjwysocki.net>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Rob Herring <robh@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-omap@vger.kernel.org
Subject: [PATCH V4 2/7] ARM: TI: Use - instead of @ for DT OPP entries
Date: Thu, 20 Apr 2017 11:14:13 +0530	[thread overview]
Message-ID: <f28bf0c7a177c78b5f6d298462a0bb627dfae937.1492666725.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1492666725.git.viresh.kumar@linaro.org>
In-Reply-To: <cover.1492666725.git.viresh.kumar@linaro.org>

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 .../devicetree/bindings/cpufreq/ti-cpufreq.txt       | 20 ++++++++++----------
 arch/arm/boot/dts/am4372.dtsi                        | 10 +++++-----
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
index ba0e15ad5bd9..0c38e4b8fc51 100644
--- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
@@ -63,64 +63,64 @@ cpu0_opp_table: opp-table {
 	 * because they can not be enabled simultaneously on a
 	 * single SoC.
 	 */
-	opp50@300000000 {
+	opp50-300000000 {
 		opp-hz = /bits/ 64 <300000000>;
 		opp-microvolt = <950000 931000 969000>;
 		opp-supported-hw = <0x06 0x0010>;
 		opp-suspend;
 	};
 
-	opp100@275000000 {
+	opp100-275000000 {
 		opp-hz = /bits/ 64 <275000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x01 0x00FF>;
 		opp-suspend;
 	};
 
-	opp100@300000000 {
+	opp100-300000000 {
 		opp-hz = /bits/ 64 <300000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x06 0x0020>;
 		opp-suspend;
 	};
 
-	opp100@500000000 {
+	opp100-500000000 {
 		opp-hz = /bits/ 64 <500000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	opp100@600000000 {
+	opp100-600000000 {
 		opp-hz = /bits/ 64 <600000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x06 0x0040>;
 	};
 
-	opp120@600000000 {
+	opp120-600000000 {
 		opp-hz = /bits/ 64 <600000000>;
 		opp-microvolt = <1200000 1176000 1224000>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	opp120@720000000 {
+	opp120-720000000 {
 		opp-hz = /bits/ 64 <720000000>;
 		opp-microvolt = <1200000 1176000 1224000>;
 		opp-supported-hw = <0x06 0x0080>;
 	};
 
-	oppturbo@720000000 {
+	oppturbo-720000000 {
 		opp-hz = /bits/ 64 <720000000>;
 		opp-microvolt = <1260000 1234800 1285200>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	oppturbo@800000000 {
+	oppturbo-800000000 {
 		opp-hz = /bits/ 64 <800000000>;
 		opp-microvolt = <1260000 1234800 1285200>;
 		opp-supported-hw = <0x06 0x0100>;
 	};
 
-	oppnitro@1000000000 {
+	oppnitro-1000000000 {
 		opp-hz = /bits/ 64 <1000000000>;
 		opp-microvolt = <1325000 1298500 1351500>;
 		opp-supported-hw = <0x04 0x0200>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 97fcaf415de1..1532ffe1de63 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -60,32 +60,32 @@
 	cpu0_opp_table: opp_table0 {
 		compatible = "operating-points-v2";
 
-		opp50@300000000 {
+		opp50-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <950000 931000 969000>;
 			opp-supported-hw = <0xFF 0x01>;
 			opp-suspend;
 		};
 
-		opp100@600000000 {
+		opp100-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0xFF 0x04>;
 		};
 
-		opp120@720000000 {
+		opp120-720000000 {
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1200000 1176000 1224000>;
 			opp-supported-hw = <0xFF 0x08>;
 		};
 
-		oppturbo@800000000 {
+		oppturbo-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1260000 1234800 1285200>;
 			opp-supported-hw = <0xFF 0x10>;
 		};
 
-		oppnitro@1000000000 {
+		oppnitro-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1325000 1298500 1351500>;
 			opp-supported-hw = <0xFF 0x20>;
-- 
2.12.0.432.g71c3a4f4ba37

WARNING: multiple messages have this Message-ID (diff)
From: Viresh Kumar <viresh.kumar@linaro.org>
To: arm@kernel.org, "Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>
Cc: Rob Herring <robh@kernel.org>,
	linaro-kernel@lists.linaro.org, linux-pm@vger.kernel.org,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Rafael Wysocki <rjw@rjwysocki.net>,
	linux-kernel@vger.kernel.org,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	devicetree@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 2/7] ARM: TI: Use - instead of @ for DT OPP entries
Date: Thu, 20 Apr 2017 11:14:13 +0530	[thread overview]
Message-ID: <f28bf0c7a177c78b5f6d298462a0bb627dfae937.1492666725.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1492666725.git.viresh.kumar@linaro.org>
In-Reply-To: <cover.1492666725.git.viresh.kumar@linaro.org>

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 .../devicetree/bindings/cpufreq/ti-cpufreq.txt       | 20 ++++++++++----------
 arch/arm/boot/dts/am4372.dtsi                        | 10 +++++-----
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
index ba0e15ad5bd9..0c38e4b8fc51 100644
--- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
@@ -63,64 +63,64 @@ cpu0_opp_table: opp-table {
 	 * because they can not be enabled simultaneously on a
 	 * single SoC.
 	 */
-	opp50@300000000 {
+	opp50-300000000 {
 		opp-hz = /bits/ 64 <300000000>;
 		opp-microvolt = <950000 931000 969000>;
 		opp-supported-hw = <0x06 0x0010>;
 		opp-suspend;
 	};
 
-	opp100@275000000 {
+	opp100-275000000 {
 		opp-hz = /bits/ 64 <275000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x01 0x00FF>;
 		opp-suspend;
 	};
 
-	opp100@300000000 {
+	opp100-300000000 {
 		opp-hz = /bits/ 64 <300000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x06 0x0020>;
 		opp-suspend;
 	};
 
-	opp100@500000000 {
+	opp100-500000000 {
 		opp-hz = /bits/ 64 <500000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	opp100@600000000 {
+	opp100-600000000 {
 		opp-hz = /bits/ 64 <600000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x06 0x0040>;
 	};
 
-	opp120@600000000 {
+	opp120-600000000 {
 		opp-hz = /bits/ 64 <600000000>;
 		opp-microvolt = <1200000 1176000 1224000>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	opp120@720000000 {
+	opp120-720000000 {
 		opp-hz = /bits/ 64 <720000000>;
 		opp-microvolt = <1200000 1176000 1224000>;
 		opp-supported-hw = <0x06 0x0080>;
 	};
 
-	oppturbo@720000000 {
+	oppturbo-720000000 {
 		opp-hz = /bits/ 64 <720000000>;
 		opp-microvolt = <1260000 1234800 1285200>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	oppturbo@800000000 {
+	oppturbo-800000000 {
 		opp-hz = /bits/ 64 <800000000>;
 		opp-microvolt = <1260000 1234800 1285200>;
 		opp-supported-hw = <0x06 0x0100>;
 	};
 
-	oppnitro@1000000000 {
+	oppnitro-1000000000 {
 		opp-hz = /bits/ 64 <1000000000>;
 		opp-microvolt = <1325000 1298500 1351500>;
 		opp-supported-hw = <0x04 0x0200>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 97fcaf415de1..1532ffe1de63 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -60,32 +60,32 @@
 	cpu0_opp_table: opp_table0 {
 		compatible = "operating-points-v2";
 
-		opp50@300000000 {
+		opp50-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <950000 931000 969000>;
 			opp-supported-hw = <0xFF 0x01>;
 			opp-suspend;
 		};
 
-		opp100@600000000 {
+		opp100-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0xFF 0x04>;
 		};
 
-		opp120@720000000 {
+		opp120-720000000 {
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1200000 1176000 1224000>;
 			opp-supported-hw = <0xFF 0x08>;
 		};
 
-		oppturbo@800000000 {
+		oppturbo-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1260000 1234800 1285200>;
 			opp-supported-hw = <0xFF 0x10>;
 		};
 
-		oppnitro@1000000000 {
+		oppnitro-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1325000 1298500 1351500>;
 			opp-supported-hw = <0xFF 0x20>;
-- 
2.12.0.432.g71c3a4f4ba37

WARNING: multiple messages have this Message-ID (diff)
From: viresh.kumar@linaro.org (Viresh Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 2/7] ARM: TI: Use - instead of @ for DT OPP entries
Date: Thu, 20 Apr 2017 11:14:13 +0530	[thread overview]
Message-ID: <f28bf0c7a177c78b5f6d298462a0bb627dfae937.1492666725.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1492666725.git.viresh.kumar@linaro.org>

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp at 1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 .../devicetree/bindings/cpufreq/ti-cpufreq.txt       | 20 ++++++++++----------
 arch/arm/boot/dts/am4372.dtsi                        | 10 +++++-----
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
index ba0e15ad5bd9..0c38e4b8fc51 100644
--- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
@@ -63,64 +63,64 @@ cpu0_opp_table: opp-table {
 	 * because they can not be enabled simultaneously on a
 	 * single SoC.
 	 */
-	opp50 at 300000000 {
+	opp50-300000000 {
 		opp-hz = /bits/ 64 <300000000>;
 		opp-microvolt = <950000 931000 969000>;
 		opp-supported-hw = <0x06 0x0010>;
 		opp-suspend;
 	};
 
-	opp100 at 275000000 {
+	opp100-275000000 {
 		opp-hz = /bits/ 64 <275000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x01 0x00FF>;
 		opp-suspend;
 	};
 
-	opp100 at 300000000 {
+	opp100-300000000 {
 		opp-hz = /bits/ 64 <300000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x06 0x0020>;
 		opp-suspend;
 	};
 
-	opp100 at 500000000 {
+	opp100-500000000 {
 		opp-hz = /bits/ 64 <500000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	opp100 at 600000000 {
+	opp100-600000000 {
 		opp-hz = /bits/ 64 <600000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x06 0x0040>;
 	};
 
-	opp120 at 600000000 {
+	opp120-600000000 {
 		opp-hz = /bits/ 64 <600000000>;
 		opp-microvolt = <1200000 1176000 1224000>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	opp120 at 720000000 {
+	opp120-720000000 {
 		opp-hz = /bits/ 64 <720000000>;
 		opp-microvolt = <1200000 1176000 1224000>;
 		opp-supported-hw = <0x06 0x0080>;
 	};
 
-	oppturbo at 720000000 {
+	oppturbo-720000000 {
 		opp-hz = /bits/ 64 <720000000>;
 		opp-microvolt = <1260000 1234800 1285200>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	oppturbo at 800000000 {
+	oppturbo-800000000 {
 		opp-hz = /bits/ 64 <800000000>;
 		opp-microvolt = <1260000 1234800 1285200>;
 		opp-supported-hw = <0x06 0x0100>;
 	};
 
-	oppnitro at 1000000000 {
+	oppnitro-1000000000 {
 		opp-hz = /bits/ 64 <1000000000>;
 		opp-microvolt = <1325000 1298500 1351500>;
 		opp-supported-hw = <0x04 0x0200>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 97fcaf415de1..1532ffe1de63 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -60,32 +60,32 @@
 	cpu0_opp_table: opp_table0 {
 		compatible = "operating-points-v2";
 
-		opp50 at 300000000 {
+		opp50-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <950000 931000 969000>;
 			opp-supported-hw = <0xFF 0x01>;
 			opp-suspend;
 		};
 
-		opp100 at 600000000 {
+		opp100-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0xFF 0x04>;
 		};
 
-		opp120 at 720000000 {
+		opp120-720000000 {
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1200000 1176000 1224000>;
 			opp-supported-hw = <0xFF 0x08>;
 		};
 
-		oppturbo at 800000000 {
+		oppturbo-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1260000 1234800 1285200>;
 			opp-supported-hw = <0xFF 0x10>;
 		};
 
-		oppnitro at 1000000000 {
+		oppnitro-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1325000 1298500 1351500>;
 			opp-supported-hw = <0xFF 0x20>;
-- 
2.12.0.432.g71c3a4f4ba37

  parent reply	other threads:[~2017-04-20  5:49 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-20  5:44 [PATCH V4 0/7] PM / OPP: Use - instead of @ for DT entries Viresh Kumar
2017-04-20  5:44 ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 1/7] " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44 ` Viresh Kumar [this message]
2017-04-20  5:44   ` [PATCH V4 2/7] ARM: TI: Use - instead of @ for DT OPP entries Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 3/7] ARM: exynos: " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 4/7] ARM: pxa: " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 5/7] ARM: sun8i: " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  8:02   ` Maxime Ripard
2017-04-20  8:02     ` Maxime Ripard
2017-04-20  9:29     ` Viresh Kumar
2017-04-20  9:29       ` Viresh Kumar
2017-04-20  9:29       ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 6/7] ARM: uniphier: " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 7/7] ARM: ZTE: " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  9:30 ` [PATCH V4 0/7] PM / OPP: Use - instead of @ for DT entries Viresh Kumar
2017-04-20  9:30   ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f28bf0c7a177c78b5f6d298462a0bb627dfae937.1492666725.git.viresh.kumar@linaro.org \
    --to=viresh.kumar@linaro.org \
    --cc=arm@kernel.org \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk@kernel.org \
    --cc=linaro-kernel@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=tony@atomide.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.