From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Agner Date: Mon, 03 Oct 2016 12:59:00 -0700 Subject: [U-Boot] [PATCH 00/10] mx7: add dt support for Colibri iMX7S/iMX7D In-Reply-To: References: <20160726062233.7656-1-stefan@agner.ch> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Stefano, On 2016-08-26 06:25, Stefano Babic wrote: > Hi Stefan, > > On 26/07/2016 08:22, Stefan Agner wrote: >> From: Stefan Agner >> >> This patchset adds device tree support for Colibri iMX7S/iMX7D. >> It is the first device tree enabled board for any i.MX 7 SoC >> hence the patchset adds some common infrastructure: >> - Add device tree support for serial_mxc. >> - imx7.dtsi - I descided to leave the s/d suffix since the SoCs >> are very similar and boards will likely use runtime detection >> to distinguish the two available SoCs. >> - The pinmux file imx7d-pinfunc.h is taken from the Kernel and >> stored in the same place >> >> Otherwise the conversion is quite straightforward and simplified >> the board code somewhat. Two patches enhance the board support >> with PMIC support, which has been the driver for this conversion. >> >> -- > > > Applied (whole series) to u-boot-imx, thanks ! I did not see this patch set in 2016.11-rc1, will it still make it there? -- Stefan