From: Fabio Aiuto <fabioaiuto83@gmail.com>
To: gregkh@linuxfoundation.org
Cc: joe@perches.com, linux-staging@lists.linux.dev,
linux-kernel@vger.kernel.org,
Fabio Aiuto <fabioaiuto83@gmail.com>
Subject: [PATCH 15/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in core/rtw_ieee80211.c
Date: Wed, 31 Mar 2021 11:39:43 +0200 [thread overview]
Message-ID: <f47ab96ce6c828c58bfca8ffb895a33f6071e4d4.1617183374.git.fabioaiuto83@gmail.com> (raw)
In-Reply-To: <cover.1617183374.git.fabioaiuto83@gmail.com>
replace private macro RT_TRACE for tracing with in-kernel
pr_* printk wrappers
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
---
.../staging/rtl8723bs/core/rtw_ieee80211.c | 116 +++++++++++-------
1 file changed, 74 insertions(+), 42 deletions(-)
diff --git a/drivers/staging/rtl8723bs/core/rtw_ieee80211.c b/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
index e931afc3ba22..a7589f919c35 100644
--- a/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
+++ b/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
@@ -489,7 +489,8 @@ int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwis
left -= WPA_SELECTOR_LEN;
} else if (left > 0) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("%s: ie length mismatch, %u too much", __func__, left));
+ pr_err("%s %s: ie length mismatch, %u too much",
+ DRIVER_PREFIX, __func__, left);
return _FAIL;
}
@@ -502,8 +503,9 @@ int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwis
left -= 2;
if (count == 0 || left < count * WPA_SELECTOR_LEN) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("%s: ie count botch (pairwise), "
- "count %u left %u", __func__, count, left));
+ pr_err("%s %s: ie count botch (pairwise), "
+ "count %u left %u", DRIVER_PREFIX,
+ __func__, count, left);
return _FAIL;
}
@@ -515,7 +517,7 @@ int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwis
}
} else if (left == 1) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("%s: ie too short (for key mgmt)", __func__));
+ pr_err("%s %s: ie too short (for key mgmt)", DRIVER_PREFIX, __func__);
return _FAIL;
}
@@ -523,7 +525,8 @@ int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwis
if (left >= 6) {
pos += 2;
if (!memcmp(pos, SUITE_1X, 4)) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("%s : there has 802.1x auth\n", __func__));
+ pr_info("%s %s : there has 802.1x auth\n",
+ DRIVER_PREFIX, __func__);
*is_8021x = 1;
}
}
@@ -560,7 +563,8 @@ int rtw_parse_wpa2_ie(u8 *rsn_ie, int rsn_ie_len, int *group_cipher, int *pairwi
left -= RSN_SELECTOR_LEN;
} else if (left > 0) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("%s: ie length mismatch, %u too much", __func__, left));
+ pr_err("%s %s: ie length mismatch, %u too much",
+ DRIVER_PREFIX, __func__, left);
return _FAIL;
}
@@ -572,8 +576,9 @@ int rtw_parse_wpa2_ie(u8 *rsn_ie, int rsn_ie_len, int *group_cipher, int *pairwi
left -= 2;
if (count == 0 || left < count * RSN_SELECTOR_LEN) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("%s: ie count botch (pairwise), "
- "count %u left %u", __func__, count, left));
+ pr_err("%s %s: ie count botch (pairwise), "
+ "count %u left %u",
+ DRIVER_PREFIX, __func__, count, left);
return _FAIL;
}
@@ -585,7 +590,8 @@ int rtw_parse_wpa2_ie(u8 *rsn_ie, int rsn_ie_len, int *group_cipher, int *pairwi
}
} else if (left == 1) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_err_, ("%s: ie too short (for key mgmt)", __func__));
+ pr_err("%s %s: ie too short (for key mgmt)",
+ DRIVER_PREFIX, __func__);
return _FAIL;
}
@@ -594,7 +600,8 @@ int rtw_parse_wpa2_ie(u8 *rsn_ie, int rsn_ie_len, int *group_cipher, int *pairwi
if (left >= 6) {
pos += 2;
if (!memcmp(pos, SUITE_1X, 4)) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("%s (): there has 802.1x auth\n", __func__));
+ pr_info("%s %s: there has 802.1x auth\n",
+ DRIVER_PREFIX, __func__);
*is_8021x = 1;
}
}
@@ -630,9 +637,16 @@ int rtw_get_wapi_ie(u8 *in_ie, uint in_len, u8 *wapi_ie, u16 *wapi_len)
memcpy(wapi_ie, &in_ie[cnt], in_ie[cnt+1]+2);
for (i = 0; i < (in_ie[cnt+1]+2); i = i+8) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("\n %2x,%2x,%2x,%2x,%2x,%2x,%2x,%2x\n",
- wapi_ie[i], wapi_ie[i+1], wapi_ie[i+2], wapi_ie[i+3], wapi_ie[i+4],
- wapi_ie[i+5], wapi_ie[i+6], wapi_ie[i+7]));
+ pr_info("%s %2x,%2x,%2x,%2x,%2x,%2x,%2x,%2x\n",
+ DRIVER_PREFIX,
+ wapi_ie[i],
+ wapi_ie[i+1],
+ wapi_ie[i+2],
+ wapi_ie[i+3],
+ wapi_ie[i+4],
+ wapi_ie[i+5],
+ wapi_ie[i+6],
+ wapi_ie[i+7]);
}
}
@@ -668,31 +682,47 @@ void rtw_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len, u8 *wpa_ie
authmode = in_ie[cnt];
if ((authmode == WLAN_EID_VENDOR_SPECIFIC) && (!memcmp(&in_ie[cnt+2], &wpa_oui[0], 4))) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("\n rtw_get_wpa_ie: sec_idx =%d in_ie[cnt+1]+2 =%d\n", sec_idx, in_ie[cnt+1]+2));
+ pr_info("%s %s: sec_idx =%d in_ie[cnt+1]+2 =%d\n",
+ DRIVER_PREFIX, __func__, sec_idx, in_ie[cnt+1]+2);
- if (wpa_ie) {
+ if (wpa_ie) {
memcpy(wpa_ie, &in_ie[cnt], in_ie[cnt+1]+2);
for (i = 0; i < (in_ie[cnt+1]+2); i = i+8) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("\n %2x,%2x,%2x,%2x,%2x,%2x,%2x,%2x\n",
- wpa_ie[i], wpa_ie[i+1], wpa_ie[i+2], wpa_ie[i+3], wpa_ie[i+4],
- wpa_ie[i+5], wpa_ie[i+6], wpa_ie[i+7]));
- }
+ pr_info("%s %2x,%2x,%2x,%2x,%2x,%2x,%2x,%2x\n",
+ DRIVER_PREFIX,
+ wpa_ie[i],
+ wpa_ie[i+1],
+ wpa_ie[i+2],
+ wpa_ie[i+3],
+ wpa_ie[i+4],
+ wpa_ie[i+5],
+ wpa_ie[i+6],
+ wpa_ie[i+7]);
}
+ }
- *wpa_len = in_ie[cnt+1]+2;
- cnt += in_ie[cnt+1]+2; /* get next */
+ *wpa_len = in_ie[cnt+1]+2;
+ cnt += in_ie[cnt+1]+2; /* get next */
} else {
if (authmode == WLAN_EID_RSN) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("\n get_rsn_ie: sec_idx =%d in_ie[cnt+1]+2 =%d\n", sec_idx, in_ie[cnt+1]+2));
+ pr_info("%s %s: sec_idx =%d in_ie[cnt+1]+2 =%d\n",
+ DRIVER_PREFIX, __func__, sec_idx, in_ie[cnt+1]+2);
if (rsn_ie) {
memcpy(rsn_ie, &in_ie[cnt], in_ie[cnt+1]+2);
- for (i = 0; i < (in_ie[cnt+1]+2); i = i+8) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("\n %2x,%2x,%2x,%2x,%2x,%2x,%2x,%2x\n",
- rsn_ie[i], rsn_ie[i+1], rsn_ie[i+2], rsn_ie[i+3], rsn_ie[i+4],
- rsn_ie[i+5], rsn_ie[i+6], rsn_ie[i+7]));
+ for (i = 0; i < (in_ie[cnt+1]+2); i = i+8) {
+ pr_info("%s %2x,%2x,%2x,%2x,%2x,%2x,%2x,%2x\n",
+ DRIVER_PREFIX,
+ rsn_ie[i],
+ rsn_ie[i+1],
+ rsn_ie[i+2],
+ rsn_ie[i+3],
+ rsn_ie[i+4],
+ rsn_ie[i+5],
+ rsn_ie[i+6],
+ rsn_ie[i+7]);
}
}
@@ -1138,28 +1168,30 @@ static int rtw_get_cipher_info(struct wlan_network *pnetwork)
pbuf = rtw_get_wpa_ie(&pnetwork->network.IEs[12], &wpa_ielen, pnetwork->network.IELength-12);
if (pbuf && (wpa_ielen > 0)) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_get_cipher_info: wpa_ielen: %d", wpa_ielen));
+ pr_info("%s %s: wpa_ielen: %d", DRIVER_PREFIX, __func__, wpa_ielen);
if (_SUCCESS == rtw_parse_wpa_ie(pbuf, wpa_ielen+2, &group_cipher, &pairwise_cipher, &is8021x)) {
pnetwork->BcnInfo.pairwise_cipher = pairwise_cipher;
pnetwork->BcnInfo.group_cipher = group_cipher;
pnetwork->BcnInfo.is_8021x = is8021x;
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("%s: pnetwork->pairwise_cipher: %d, is_8021x is %d",
- __func__, pnetwork->BcnInfo.pairwise_cipher, pnetwork->BcnInfo.is_8021x));
+ pr_info("%s %s: pnetwork->pairwise_cipher: %d, is_8021x is %d",
+ DRIVER_PREFIX, __func__, pnetwork->BcnInfo.pairwise_cipher,
+ pnetwork->BcnInfo.is_8021x);
ret = _SUCCESS;
}
} else {
pbuf = rtw_get_wpa2_ie(&pnetwork->network.IEs[12], &wpa_ielen, pnetwork->network.IELength-12);
if (pbuf && (wpa_ielen > 0)) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("get RSN IE\n"));
+ pr_info("%s get RSN IE\n", DRIVER_PREFIX);
if (_SUCCESS == rtw_parse_wpa2_ie(pbuf, wpa_ielen+2, &group_cipher, &pairwise_cipher, &is8021x)) {
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("get RSN IE OK!!!\n"));
+ pr_info("%s get RSN IE OK!!!\n", DRIVER_PREFIX);
pnetwork->BcnInfo.pairwise_cipher = pairwise_cipher;
pnetwork->BcnInfo.group_cipher = group_cipher;
pnetwork->BcnInfo.is_8021x = is8021x;
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("%s: pnetwork->pairwise_cipher: %d,"
- "pnetwork->group_cipher is %d, is_8021x is %d", __func__, pnetwork->BcnInfo.pairwise_cipher,
- pnetwork->BcnInfo.group_cipher, pnetwork->BcnInfo.is_8021x));
+ pr_info("%s %s: pnetwork->pairwise_cipher: %d,"
+ "pnetwork->group_cipher is %d, is_8021x is %d",
+ DRIVER_PREFIX, __func__, pnetwork->BcnInfo.pairwise_cipher,
+ pnetwork->BcnInfo.group_cipher, pnetwork->BcnInfo.is_8021x);
ret = _SUCCESS;
}
}
@@ -1189,10 +1221,10 @@ void rtw_get_bcn_info(struct wlan_network *pnetwork)
pnetwork->BcnInfo.encryp_protocol = ENCRYP_PROTOCOL_OPENSYS;
}
rtw_get_sec_ie(pnetwork->network.IEs, pnetwork->network.IELength, NULL, &rsn_len, NULL, &wpa_len);
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_get_bcn_info: ssid =%s\n", pnetwork->network.Ssid.Ssid));
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_get_bcn_info: wpa_len =%d rsn_len =%d\n", wpa_len, rsn_len));
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_get_bcn_info: ssid =%s\n", pnetwork->network.Ssid.Ssid));
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_get_bcn_info: wpa_len =%d rsn_len =%d\n", wpa_len, rsn_len));
+ pr_info("%s %s: ssid =%s\n", DRIVER_PREFIX, __func__, pnetwork->network.Ssid.Ssid);
+ pr_info("%s %s: wpa_len =%d rsn_len =%d\n", DRIVER_PREFIX, __func__, wpa_len, rsn_len);
+ pr_info("%s %s: ssid =%s\n", DRIVER_PREFIX, __func__, pnetwork->network.Ssid.Ssid);
+ pr_info("%s %s: wpa_len =%d rsn_len =%d\n", DRIVER_PREFIX, __func__, wpa_len, rsn_len);
if (rsn_len > 0) {
pnetwork->BcnInfo.encryp_protocol = ENCRYP_PROTOCOL_WPA2;
@@ -1202,10 +1234,10 @@ void rtw_get_bcn_info(struct wlan_network *pnetwork)
if (bencrypt)
pnetwork->BcnInfo.encryp_protocol = ENCRYP_PROTOCOL_WEP;
}
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_get_bcn_info: pnetwork->encryp_protocol is %x\n",
- pnetwork->BcnInfo.encryp_protocol));
- RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("rtw_get_bcn_info: pnetwork->encryp_protocol is %x\n",
- pnetwork->BcnInfo.encryp_protocol));
+ pr_info("%s %s: pnetwork->encryp_protocol is %x\n",
+ DRIVER_PREFIX, __func__, pnetwork->BcnInfo.encryp_protocol);
+ pr_info("%s %s: pnetwork->encryp_protocol is %x\n",
+ DRIVER_PREFIX, __func__, pnetwork->BcnInfo.encryp_protocol);
rtw_get_cipher_info(pnetwork);
/* get bwmode and ch_offset */
--
2.20.1
next prev parent reply other threads:[~2021-03-31 9:40 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-31 9:39 [PATCH 00/40] staging: rtl8723bs: replace RT_TRACE private macro Fabio Aiuto
2021-03-31 9:39 ` [PATCH 01/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in core/rtw_xmit.c Fabio Aiuto
2021-03-31 10:16 ` Dan Carpenter
2021-03-31 9:39 ` [PATCH 02/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in core/rtw_security.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 03/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in core/rtw_eeprom.c Fabio Aiuto
2021-03-31 10:27 ` Greg KH
2021-03-31 10:36 ` Fabio Aiuto
2021-03-31 10:48 ` Greg KH
2021-03-31 12:19 ` Fabio Aiuto
2021-03-31 10:55 ` Fabio Aiuto
2021-03-31 11:14 ` Greg KH
2021-03-31 12:17 ` Fabio Aiuto
2021-04-01 9:10 ` Fabio Aiuto
2021-03-31 9:39 ` [PATCH 04/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in core/rtw_pwrctrl.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 05/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in core/rtw_cmd.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 06/40] staging: rtl8723bs: remove commented RT_TRACE calls in core/rtw_mlme.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 07/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers " Fabio Aiuto
2021-03-31 9:39 ` [PATCH 08/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in core/rtw_mlme_ext.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 09/40] staging: rtl8723bs: remove commented RT_TRACE calls in core/rtw_recv.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 10/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers " Fabio Aiuto
2021-03-31 9:39 ` [PATCH 11/40] staging: rtl8723bs: remove commented RT_TRACE call in core/rtw_ioctl_set.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 12/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers " Fabio Aiuto
2021-03-31 9:39 ` [PATCH 13/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in core/rtw_wlan_util.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 14/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in core/rtw_sta_mgt.c Fabio Aiuto
2021-03-31 9:39 ` Fabio Aiuto [this message]
2021-03-31 9:39 ` [PATCH 16/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in hal/HalPwrSeqCmd.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 17/40] staging: rtl8723bs: fix constant name in hal/rtl8723b_hal_init.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 18/40] staging: rtl8723bs: added driver prefix in log messages Fabio Aiuto
2021-03-31 9:39 ` [PATCH 19/40] staging: rtl8723bs: remove commented RT_TRACE call in hal/rtl8723b_hal_init.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 20/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers " Fabio Aiuto
2021-03-31 9:39 ` [PATCH 21/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in hal/sdio_ops.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 22/40] staging: rtl8723bs: remove commented code block in hal/hal_com_phycfg.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 23/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in hal/rtl8723b_phycfg.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 24/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in hal/hal_intf.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 25/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in hal/rtl8723bs_xmit.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 26/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in hal/sdio_halinit.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 27/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in hal/rtl8723bs_recv.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 28/40] staging: rtl8723bs: remove commented RT_TRACE calls in hal/HalPhyRf_8723B.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 29/40] staging: rtl8723bs: remove commented RT_TRACE calls in hal/rtl8723b_rf6052.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 30/40] staging: rtl8723bs: remove commented RT_TRACE calls in os_dep/ioctl_linux.c Fabio Aiuto
2021-03-31 9:39 ` [PATCH 31/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers " Fabio Aiuto
2021-03-31 9:40 ` [PATCH 32/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in os_dep/mlme_linux.c Fabio Aiuto
2021-03-31 9:40 ` [PATCH 33/40] staging: rtl8723bs: fix string format in os_dep/ioctl_cfg80211.c Fabio Aiuto
2021-03-31 9:40 ` [PATCH 34/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers " Fabio Aiuto
2021-03-31 9:40 ` [PATCH 35/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in os_dep/os_intfs.c Fabio Aiuto
2021-03-31 9:40 ` [PATCH 36/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in os_dep/recv_linux.c Fabio Aiuto
2021-03-31 9:40 ` [PATCH 37/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in os_dep/sdio_intf.c Fabio Aiuto
2021-03-31 9:40 ` [PATCH 38/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in os_dep/xmit_linux.c Fabio Aiuto
2021-03-31 9:40 ` [PATCH 39/40] staging: rtl8723bs: replace RT_TRACE with public printk wrappers in os_dep/osdep_service.c Fabio Aiuto
2021-03-31 9:40 ` [PATCH 40/40] staging: rtl8723bs: remove obsolete debug macro Fabio Aiuto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f47ab96ce6c828c58bfca8ffb895a33f6071e4d4.1617183374.git.fabioaiuto83@gmail.com \
--to=fabioaiuto83@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.