All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michal Simek <michal.simek@xilinx.com>
To: u-boot@lists.denx.de
Subject: [PATCH 3/8] arm64: dts: zynqmp: Fix node names which contain "_"
Date: Thu,  9 Jan 2020 15:18:35 +0100	[thread overview]
Message-ID: <f595d792db6e07756d494e83af08310335b18c6e.1578579516.git.michal.simek@xilinx.com> (raw)
In-Reply-To: <cover.1578579516.git.michal.simek@xilinx.com>

s/_/-/ for node names.

It fixes warnings like this:
... Warning (node_name_chars_strict): /cpu_opp_table:
Character '_' not recommended in node name ...

Issues reported by make dtbs W=12

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/dts/zynqmp-clk.dtsi        |  4 ++--
 arch/arm/dts/zynqmp-zcu100-revC.dts |  4 ++--
 arch/arm/dts/zynqmp-zcu102-revA.dts | 10 +++++-----
 arch/arm/dts/zynqmp-zcu106-revA.dts |  2 +-
 arch/arm/dts/zynqmp-zcu111-revA.dts |  2 +-
 arch/arm/dts/zynqmp.dtsi            |  4 ++--
 6 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
index 9ef55ad0d18e..c9464ec8eb27 100644
--- a/arch/arm/dts/zynqmp-clk.dtsi
+++ b/arch/arm/dts/zynqmp-clk.dtsi
@@ -61,13 +61,13 @@
 		clock-accuracy = <100>;
 	};
 
-	dpdma_clk: dpdma_clk {
+	dpdma_clk: dpdma-clk {
 		compatible = "fixed-clock";
 		#clock-cells = <0x0>;
 		clock-frequency = <533000000>;
 	};
 
-	drm_clock: drm_clock {
+	drm_clock: drm-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0x0>;
 		clock-frequency = <262750000>;
diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index 106b56b66222..02573a1f3294 100644
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -95,7 +95,7 @@
 			linux,default-trigger = "bluetooth-power";
 		};
 
-		vbus_det { /* U5 USB5744 VBUS detection via MIO25 */
+		vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
 			label = "vbus_det";
 			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -120,7 +120,7 @@
 		regulator-boot-on;
 	};
 
-	sdio_pwrseq: sdio_pwrseq {
+	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
 	};
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 78110c490e8d..7d2f59b88c6f 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -58,7 +58,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		heartbeat_led {
+		heartbeat-led {
 			label = "heartbeat";
 			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -213,25 +213,25 @@
 		gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
 				"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
 				"", "", "", "", "", "", "", "", "";
-		gtr_sel0 {
+		gtr-sel0 {
 			gpio-hog;
 			gpios = <0 0>;
 			output-low; /* PCIE = 0, DP = 1 */
 			line-name = "sel0";
 		};
-		gtr_sel1 {
+		gtr-sel1 {
 			gpio-hog;
 			gpios = <1 0>;
 			output-high; /* PCIE = 0, DP = 1 */
 			line-name = "sel1";
 		};
-		gtr_sel2 {
+		gtr-sel2 {
 			gpio-hog;
 			gpios = <2 0>;
 			output-high; /* PCIE = 0, USB0 = 1 */
 			line-name = "sel2";
 		};
-		gtr_sel3 {
+		gtr-sel3 {
 			gpio-hog;
 			gpios = <3 0>;
 			output-high; /* PCIE = 0, SATA = 1 */
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index 7c73ff283e7a..6faac956848b 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -58,7 +58,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		heartbeat_led {
+		heartbeat-led {
 			label = "heartbeat";
 			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index ca95d7e059a8..5b648ceb2df6 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -58,7 +58,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		heartbeat_led {
+		heartbeat-led {
 			label = "heartbeat";
 			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 8646c4c3a340..232fd0c11cd7 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -74,7 +74,7 @@
 		};
 	};
 
-	cpu_opp_table: cpu_opp_table {
+	cpu_opp_table: cpu-opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
 		opp00 {
@@ -252,7 +252,7 @@
 		};
 	};
 
-	amba_apu: amba_apu at 0 {
+	amba_apu: amba-apu at 0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-- 
2.24.0

  parent reply	other threads:[~2020-01-09 14:18 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-09 14:18 [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek
2020-01-09 14:18 ` [PATCH 1/8] arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up Michal Simek
2020-01-09 14:18 ` [PATCH 2/8] arm64: dts: Remove inconsistent use of 'arm, armv8' compatible string Michal Simek
2020-01-10 15:36   ` Masahiro Yamada
2020-01-13  6:50     ` Michal Simek
2020-01-09 14:18 ` Michal Simek [this message]
2020-01-09 14:18 ` [PATCH 4/8] arm64: dts: zcu100-revC: Give wifi some time after power-on Michal Simek
2020-01-09 14:18 ` [PATCH 5/8] arm64: dts: zynqmp: replace gpio-key, wakeup with wakeup-source property Michal Simek
2020-01-09 14:18 ` [PATCH 6/8] arm64: zynqmp: Sync gpio-controller name location Michal Simek
2020-01-09 14:18 ` [PATCH 7/8] arm64: zynqmp: Sync gem clock nodes with mainline Linux Michal Simek
2020-01-09 14:18 ` [PATCH 8/8] ARM: dts: zynq: enablement of coresight topology Michal Simek
2020-01-16  7:08 ` [PATCH 0/8] xilinx: Various DT changes and syncups Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f595d792db6e07756d494e83af08310335b18c6e.1578579516.git.michal.simek@xilinx.com \
    --to=michal.simek@xilinx.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.