From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH 1/3] imx8mn: evk: add README
Date: Mon, 6 Jan 2020 14:42:13 +0100 [thread overview]
Message-ID: <f6ddf503-5770-7d77-aed7-aa35ac346e88@denx.de> (raw)
In-Reply-To: <20200106082403.26268-1-peng.fan@nxp.com>
On 06/01/20 09:04, Peng Fan wrote:
> Add a README for users to build a workable image.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> board/freescale/imx8mn_evk/README | 37 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
> create mode 100644 board/freescale/imx8mn_evk/README
>
> diff --git a/board/freescale/imx8mn_evk/README b/board/freescale/imx8mn_evk/README
> new file mode 100644
> index 0000000000..12754c7999
> --- /dev/null
> +++ b/board/freescale/imx8mn_evk/README
> @@ -0,0 +1,37 @@
> +U-Boot for the NXP i.MX8MM EVK board
> +
> +Quick Start
> +===========
> +- Build the ARM Trusted firmware binary
> +- Get ddr firmware
> +- Build U-Boot
> +- Boot
> +
> +Get and Build the ARM Trusted firmware
> +======================================
> +Note: srctree is U-Boot source directory
You mean the imx-atf source directory ?
> +Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
> +branch: imx_4.19.35_1.1.0
> +$ make PLAT=imx8mn bl31
> +$ cp build/imx8mn/release/bl31.bin $(srctree)
> +
> +Get the ddr firmware
> +=============================
> +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
> +$ chmod +x firmware-imx-8.0.bin
> +$ ./firmware-imx-8.0
> +$ cp firmware-imx-8.0/firmware/ddr/synopsys/ddr4*.bin $(srctree)
> +
> +Build U-Boot
> +============
> +$ export CROSS_COMPILE=aarch64-poky-linux-
> +$ make imx8mn_ddr4_evk_defconfig
> +$ export ATF_LOAD_ADDR=0x960000
> +$ make flash.bin
> +
> +Burn the flash.bin to MicroSD card offset 32KB
> +$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
> +
> +Boot
> +====
> +Set Boot switch to SD boot
>
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2020-01-06 13:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-06 8:04 [PATCH 1/3] imx8mn: evk: add README Peng Fan
2020-01-06 8:04 ` [PATCH 2/3] imx: imx8mn_evk: add board_mmc_get_env_dev Peng Fan
2020-01-06 8:04 ` [PATCH 3/3] imx: imx8mn: enable CONFIG_CMD_ERASEENV Peng Fan
2020-01-06 10:40 ` [PATCH 1/3] imx8mn: evk: add README Fabio Estevam
2020-01-06 12:04 ` Fabio Estevam
2020-01-07 1:14 ` Peng Fan
2020-01-06 13:42 ` Stefano Babic [this message]
2020-01-07 1:15 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f6ddf503-5770-7d77-aed7-aa35ac346e88@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.