All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Realtek linux nic maintainers <nic_swsd@realtek.com>,
	David Miller <davem@davemloft.net>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>
Subject: [PATCH net-next] r8169: factor out PHY init sequence adjusting 10M and ALDPS
Date: Wed, 23 Jan 2019 20:47:30 +0100	[thread overview]
Message-ID: <f7fe696e-2485-755a-468b-da1c91b991d3@gmail.com> (raw)

Few chip versions use the same sequence to adjust 10M and ALDPS, so
let's factor it out. This patch also fixes a (most likely) typo in
rtl8168g_1_hw_phy_config. There bit 8 in reg 0x14 on page 0x0bcc
was set and not cleared. According to the vendor driver this bit
needs to be cleared in all cases.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/ethernet/realtek/r8169.c | 49 ++++++++++++----------------
 1 file changed, 21 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 8666ec095..99fd5c1d7 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3372,6 +3372,24 @@ static void rtl8168g_disable_aldps(struct rtl8169_private *tp)
 	phy_clear_bits(tp->phydev, 0x10, BIT(2));
 }
 
+static void rtl8168g_phy_adjust_10m_aldps(struct rtl8169_private *tp)
+{
+	struct phy_device *phydev = tp->phydev;
+
+	phy_write(phydev, 0x1f, 0x0bcc);
+	phy_clear_bits(phydev, 0x14, BIT(8));
+
+	phy_write(phydev, 0x1f, 0x0a44);
+	phy_set_bits(phydev, 0x11, BIT(7) | BIT(6));
+
+	phy_write(phydev, 0x1f, 0x0a43);
+	phy_write(phydev, 0x13, 0x8084);
+	phy_clear_bits(phydev, 0x14, BIT(14) | BIT(13));
+	phy_set_bits(phydev, 0x10, BIT(12) | BIT(1) | BIT(0));
+
+	phy_write(phydev, 0x1f, 0x0000);
+}
+
 static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp)
 {
 	rtl_apply_firmware(tp);
@@ -3398,14 +3416,7 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp)
 	rtl_writephy(tp, 0x1f, 0x0a44);
 	rtl_w0w1_phy(tp, 0x11, 0x000c, 0x0000);
 
-	rtl_writephy(tp, 0x1f, 0x0bcc);
-	rtl_w0w1_phy(tp, 0x14, 0x0100, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0a44);
-	rtl_w0w1_phy(tp, 0x11, 0x00c0, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x8084);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x6000);
-	rtl_w0w1_phy(tp, 0x10, 0x1003, 0x0000);
+	rtl8168g_phy_adjust_10m_aldps(tp);
 
 	/* EEE auto-fallback function */
 	rtl_writephy(tp, 0x1f, 0x0a4b);
@@ -3624,16 +3635,7 @@ static void rtl8168ep_1_hw_phy_config(struct rtl8169_private *tp)
 	rtl_w0w1_phy(tp, 0x11, 0x000c, 0x0000);
 	rtl_writephy(tp, 0x1f, 0x0000);
 
-	/* patch 10M & ALDPS */
-	rtl_writephy(tp, 0x1f, 0x0bcc);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x0100);
-	rtl_writephy(tp, 0x1f, 0x0a44);
-	rtl_w0w1_phy(tp, 0x11, 0x00c0, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x8084);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x6000);
-	rtl_w0w1_phy(tp, 0x10, 0x1003, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	rtl8168g_phy_adjust_10m_aldps(tp);
 
 	/* Enable EEE auto-fallback function */
 	rtl_writephy(tp, 0x1f, 0x0a4b);
@@ -3658,16 +3660,7 @@ static void rtl8168ep_1_hw_phy_config(struct rtl8169_private *tp)
 
 static void rtl8168ep_2_hw_phy_config(struct rtl8169_private *tp)
 {
-	/* patch 10M & ALDPS */
-	rtl_writephy(tp, 0x1f, 0x0bcc);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x0100);
-	rtl_writephy(tp, 0x1f, 0x0a44);
-	rtl_w0w1_phy(tp, 0x11, 0x00c0, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0a43);
-	rtl_writephy(tp, 0x13, 0x8084);
-	rtl_w0w1_phy(tp, 0x14, 0x0000, 0x6000);
-	rtl_w0w1_phy(tp, 0x10, 0x1003, 0x0000);
-	rtl_writephy(tp, 0x1f, 0x0000);
+	rtl8168g_phy_adjust_10m_aldps(tp);
 
 	/* Enable UC LPF tune function */
 	rtl_writephy(tp, 0x1f, 0x0a43);
-- 
2.20.1


             reply	other threads:[~2019-01-23 19:47 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-23 19:47 Heiner Kallweit [this message]
2019-01-25  6:26 ` [PATCH net-next] r8169: factor out PHY init sequence adjusting 10M and ALDPS David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f7fe696e-2485-755a-468b-da1c91b991d3@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.