From mboxrd@z Thu Jan 1 00:00:00 1970 From: Timur Tabi Subject: Re: [PATCH 2/2] net: qcom/emac: add software control for pause frame mode Date: Tue, 12 Sep 2017 17:07:19 -0500 Message-ID: References: <1501623460-3575-1-git-send-email-timur@codeaurora.org> <1501623460-3575-3-git-send-email-timur@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit To: "David S. Miller" , netdev@vger.kernel.org Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]:59170 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751385AbdILWHV (ORCPT ); Tue, 12 Sep 2017 18:07:21 -0400 In-Reply-To: <1501623460-3575-3-git-send-email-timur@codeaurora.org> Content-Language: en-US Sender: netdev-owner@vger.kernel.org List-ID: On 08/01/2017 04:37 PM, Timur Tabi wrote: > The EMAC has the option of sending only a single pause frame when > flow control is enabled and the RX queue is full. Although sending > only one pause frame has little value, this would allow admins to > enable automatic flow control without having to worry about the EMAC > flooding nearby switches with pause frames if the kernel hangs. > > The option is enabled by using the single-pause-mode private flag. > > Signed-off-by: Timur Tabi Dave, I don't see this patch in net-next. Can you pick it up for 4.14? -- Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.