Hi Atul,

Attached is the info.  If you need anything else, let me know.

Thanks!
Greg


On Fri, 17 Dec 2004 09:00:09 -0500, Mukker, Atul <Atulm@lsil.com> wrote:
> Can you send as an attachment the 2.00.3 driver information using files from
> /proc/megaraid directory and the dmesg output for the PERC controller. Also
> the output from "lspci -vx" command. Let us see if this controller can be
> safely added in the 2.20 driver.
> 
> Thanks
> 
> ---
> Atul Mukker
> Architect, Drivers and BIOS
> LSI Logic Corporation
> 
> > -----Original Message-----
> > From: Greg Stitt [mailto:gstitt@gmail.com]
> > Sent: Thursday, December 16, 2004 9:59 PM
> > To: linux-scsi@vger.kernel.org
> > Subject: old and new megaraid drivers for linux
> >
> > Hello,
> >
> > I currently have a system with both a PERC2/SC, and a
> > recently added MegaRAID SATA 150-6.
> >
> > The PERC2/SC ran fine with the 'old style' megaraid driver (2.00.3).
> > However, the SATA card has issues with this driver, as I can't even
> > format the drives without problems.   Under Windows 2003, both cards
> > operate fine, so I don't believe this is a hardware issue.
> >
> > I tried the new megaraid driver (2.20.4.0), but it doesn't
> > recognize the PERC at all.  Not sure how stable it is with
> > the SATA though, as the PERC contains all the OS. :-)
> >
> > This was tried using the 2.6.9 linux kernel.
> >
> > I've seen mention of this issue before on this list, but has
> > anything been done since then to resolve this?
> >
> > Thanks
> > Greg Stitt
> > -
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-scsi" in the body of a message to
> > majordomo@vger.kernel.org More majordomo info at
> > http://vger.kernel.org/majordomo-info.html
> >
>