All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robin van der Gracht <robin@protonic.nl>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Miguel Ojeda <ojeda@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Paul Burton <paulburton@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Pavel Machek <pavel@ucw.cz>, Marek Behun <marek.behun@nic.cz>,
	devicetree@vger.kernel.org, linux-leds@vger.kernel.org,
	linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 17/19] auxdisplay: ht16k33: Add support for segment displays
Date: Thu, 30 Sep 2021 09:37:22 +0200	[thread overview]
Message-ID: <f902011b7be495219da31e4c1d561cfe@protonic.nl> (raw)
In-Reply-To: <20210914143835.511051-18-geert@linux-m68k.org>

Acked-by: Robin van der Gracht <robin@protonic.nl>

On 2021-09-14 16:38, Geert Uytterhoeven wrote:
> The Holtek HT16K33 LED controller is not only used for driving
> dot-matrix displays, but also for driving segment displays.
> 
> Add support for 4-digit 7-segment and quad 14-segment alphanumeric
> displays, like the Adafruit 7-segment and 14-segment display backpack
> and FeatherWing expansion boards.  Use the character line display core
> support to display a message, which will be scrolled if it doesn't fit.
> 
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> ---
> The 7-segment support is based on schematics, and untested on actual
> hardware.
> 
> v6:
>   - No changes,
> 
> v5:
>   - No changes,
> 
> v4:
>   - No changes,
> 
> v3:
>   - Pass "dev" instead of "client" to ht16k33_seg_probe(),
>   - Remove unneeded inclusion of <linux/leds.h> and <linux/of_device.h>,
> 
> v2:
>   - Move "select LINEDISP" to this patch,
>   - Set "err = -EINVAL" in switch() case that cannot happen.
> ---
>  drivers/auxdisplay/Kconfig   |   1 +
>  drivers/auxdisplay/ht16k33.c | 196 +++++++++++++++++++++++++++++++++--
>  2 files changed, 190 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
> index b41fdc5f7bf72a1b..42fc7b155de09dbc 100644
> --- a/drivers/auxdisplay/Kconfig
> +++ b/drivers/auxdisplay/Kconfig
> @@ -176,6 +176,7 @@ config HT16K33
>  	select FB_SYS_IMAGEBLIT
>  	select INPUT_MATRIXKMAP
>  	select FB_BACKLIGHT
> +	select LINEDISP
>  	help
>  	  Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
>  	  LED controller driver with keyscan.
> diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
> index 27ac167dae74bd82..3b555e119e326cec 100644
> --- a/drivers/auxdisplay/ht16k33.c
> +++ b/drivers/auxdisplay/ht16k33.c
> @@ -5,6 +5,7 @@
>   * Author: Robin van der Gracht <robin@protonic.nl>
>   *
>   * Copyright: (C) 2016 Protonic Holland.
> + * Copyright (C) 2021 Glider bv
>   */
> 
>  #include <linux/kernel.h>
> @@ -20,6 +21,13 @@
>  #include <linux/workqueue.h>
>  #include <linux/mm.h>
> 
> +#include <linux/map_to_7segment.h>
> +#include <linux/map_to_14segment.h>
> +
> +#include <asm/unaligned.h>
> +
> +#include "line-display.h"
> +
>  /* Registers */
>  #define REG_SYSTEM_SETUP		0x20
>  #define REG_SYSTEM_SETUP_OSC_ON		BIT(0)
> @@ -47,6 +55,12 @@
>  #define BYTES_PER_ROW		(HT16K33_MATRIX_LED_MAX_ROWS / 8)
>  #define HT16K33_FB_SIZE		(HT16K33_MATRIX_LED_MAX_COLS * BYTES_PER_ROW)
> 
> +enum display_type {
> +	DISP_MATRIX = 0,
> +	DISP_QUAD_7SEG,
> +	DISP_QUAD_14SEG,
> +};
> +
>  struct ht16k33_keypad {
>  	struct i2c_client *client;
>  	struct input_dev *dev;
> @@ -67,11 +81,25 @@ struct ht16k33_fbdev {
>  	uint8_t *cache;
>  };
> 
> +struct ht16k33_seg {
> +	struct linedisp linedisp;
> +	union {
> +		struct seg7_conversion_map seg7;
> +		struct seg14_conversion_map seg14;
> +	} map;
> +	unsigned int map_size;
> +	char curr[4];
> +};
> +
>  struct ht16k33_priv {
>  	struct i2c_client *client;
>  	struct delayed_work work;
>  	struct ht16k33_keypad keypad;
> -	struct ht16k33_fbdev fbdev;
> +	union {
> +		struct ht16k33_fbdev fbdev;
> +		struct ht16k33_seg seg;
> +	};
> +	enum display_type type;
>  };
> 
>  static const struct fb_fix_screeninfo ht16k33_fb_fix = {
> @@ -101,6 +129,33 @@ static const struct fb_var_screeninfo ht16k33_fb_var = 
> {
>  	.vmode = FB_VMODE_NONINTERLACED,
>  };
> 
> +static const SEG7_DEFAULT_MAP(initial_map_seg7);
> +static const SEG14_DEFAULT_MAP(initial_map_seg14);
> +
> +static ssize_t map_seg_show(struct device *dev, struct device_attribute 
> *attr,
> +			    char *buf)
> +{
> +	struct ht16k33_priv *priv = dev_get_drvdata(dev);
> +
> +	memcpy(buf, &priv->seg.map, priv->seg.map_size);
> +	return priv->seg.map_size;
> +}
> +
> +static ssize_t map_seg_store(struct device *dev, struct device_attribute 
> *attr,
> +			     const char *buf, size_t cnt)
> +{
> +	struct ht16k33_priv *priv = dev_get_drvdata(dev);
> +
> +	if (cnt != priv->seg.map_size)
> +		return -EINVAL;
> +
> +	memcpy(&priv->seg.map, buf, cnt);
> +	return cnt;
> +}
> +
> +static DEVICE_ATTR(map_seg7, 0644, map_seg_show, map_seg_store);
> +static DEVICE_ATTR(map_seg14, 0644, map_seg_show, map_seg_store);
> +
>  static int ht16k33_display_on(struct ht16k33_priv *priv)
>  {
>  	uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON;
> @@ -325,6 +380,51 @@ static void ht16k33_keypad_stop(struct input_dev *dev)
>  	disable_irq(keypad->client->irq);
>  }
> 
> +static void ht16k33_linedisp_update(struct linedisp *linedisp)
> +{
> +	struct ht16k33_priv *priv = container_of(linedisp, struct ht16k33_priv,
> +						 seg.linedisp);
> +
> +	schedule_delayed_work(&priv->work, 0);
> +}
> +
> +static void ht16k33_seg7_update(struct work_struct *work)
> +{
> +	struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv,
> +						 work.work);
> +	struct ht16k33_seg *seg = &priv->seg;
> +	char *s = seg->curr;
> +	uint8_t buf[9];
> +
> +	buf[0] = map_to_seg7(&seg->map.seg7, *s++);
> +	buf[1] = 0;
> +	buf[2] = map_to_seg7(&seg->map.seg7, *s++);
> +	buf[3] = 0;
> +	buf[4] = 0;
> +	buf[5] = 0;
> +	buf[6] = map_to_seg7(&seg->map.seg7, *s++);
> +	buf[7] = 0;
> +	buf[8] = map_to_seg7(&seg->map.seg7, *s++);
> +
> +	i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf);
> +}
> +
> +static void ht16k33_seg14_update(struct work_struct *work)
> +{
> +	struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv,
> +						 work.work);
> +	struct ht16k33_seg *seg = &priv->seg;
> +	char *s = seg->curr;
> +	uint8_t buf[8];
> +
> +	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf);
> +	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 2);
> +	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 4);
> +	put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 6);
> +
> +	i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf);
> +}
> +
>  static int ht16k33_keypad_probe(struct i2c_client *client,
>  				struct ht16k33_keypad *keypad)
>  {
> @@ -469,9 +569,56 @@ static int ht16k33_fbdev_probe(struct device *dev,
> struct ht16k33_priv *priv,
>  	return err;
>  }
> 
> +static int ht16k33_seg_probe(struct device *dev, struct ht16k33_priv *priv,
> +			     uint32_t brightness)
> +{
> +	struct ht16k33_seg *seg = &priv->seg;
> +	int err;
> +
> +	err = ht16k33_brightness_set(priv, MAX_BRIGHTNESS);
> +	if (err)
> +		return err;
> +
> +	switch (priv->type) {
> +	case DISP_MATRIX:
> +		/* not handled here */
> +		err = -EINVAL;
> +		break;
> +
> +	case DISP_QUAD_7SEG:
> +		INIT_DELAYED_WORK(&priv->work, ht16k33_seg7_update);
> +		seg->map.seg7 = initial_map_seg7;
> +		seg->map_size = sizeof(seg->map.seg7);
> +		err = device_create_file(dev, &dev_attr_map_seg7);
> +		break;
> +
> +	case DISP_QUAD_14SEG:
> +		INIT_DELAYED_WORK(&priv->work, ht16k33_seg14_update);
> +		seg->map.seg14 = initial_map_seg14;
> +		seg->map_size = sizeof(seg->map.seg14);
> +		err = device_create_file(dev, &dev_attr_map_seg14);
> +		break;
> +	}
> +	if (err)
> +		return err;
> +
> +	err = linedisp_register(&seg->linedisp, dev, 4, seg->curr,
> +				ht16k33_linedisp_update);
> +	if (err)
> +		goto err_remove_map_file;
> +
> +	return 0;
> +
> +err_remove_map_file:
> +	device_remove_file(dev, &dev_attr_map_seg7);
> +	device_remove_file(dev, &dev_attr_map_seg14);
> +	return err;
> +}
> +
>  static int ht16k33_probe(struct i2c_client *client)
>  {
>  	struct device *dev = &client->dev;
> +	const struct of_device_id *id;
>  	struct ht16k33_priv *priv;
>  	uint32_t dft_brightness;
>  	int err;
> @@ -486,6 +633,9 @@ static int ht16k33_probe(struct i2c_client *client)
>  		return -ENOMEM;
> 
>  	priv->client = client;
> +	id = i2c_of_match_device(dev->driver->of_match_table, client);
> +	if (id)
> +		priv->type = (uintptr_t)id->data;
>  	i2c_set_clientdata(client, priv);
> 
>  	err = ht16k33_initialize(priv);
> @@ -510,8 +660,19 @@ static int ht16k33_probe(struct i2c_client *client)
>  			return err;
>  	}
> 
> -	/* Frame Buffer Display */
> -	return ht16k33_fbdev_probe(dev, priv, dft_brightness);
> +	switch (priv->type) {
> +	case DISP_MATRIX:
> +		/* Frame Buffer Display */
> +		err = ht16k33_fbdev_probe(dev, priv, dft_brightness);
> +		break;
> +
> +	case DISP_QUAD_7SEG:
> +	case DISP_QUAD_14SEG:
> +		/* Segment Display */
> +		err = ht16k33_seg_probe(dev, priv, dft_brightness);
> +		break;
> +	}
> +	return err;
>  }
> 
>  static int ht16k33_remove(struct i2c_client *client)
> @@ -520,9 +681,21 @@ static int ht16k33_remove(struct i2c_client *client)
>  	struct ht16k33_fbdev *fbdev = &priv->fbdev;
> 
>  	cancel_delayed_work_sync(&priv->work);
> -	unregister_framebuffer(fbdev->info);
> -	framebuffer_release(fbdev->info);
> -	free_page((unsigned long) fbdev->buffer);
> +
> +	switch (priv->type) {
> +	case DISP_MATRIX:
> +		unregister_framebuffer(fbdev->info);
> +		framebuffer_release(fbdev->info);
> +		free_page((unsigned long)fbdev->buffer);
> +		break;
> +
> +	case DISP_QUAD_7SEG:
> +	case DISP_QUAD_14SEG:
> +		linedisp_unregister(&priv->seg.linedisp);
> +		device_remove_file(&client->dev, &dev_attr_map_seg7);
> +		device_remove_file(&client->dev, &dev_attr_map_seg14);
> +		break;
> +	}
> 
>  	return 0;
>  }
> @@ -534,7 +707,16 @@ static const struct i2c_device_id ht16k33_i2c_match[] = 
> {
>  MODULE_DEVICE_TABLE(i2c, ht16k33_i2c_match);
> 
>  static const struct of_device_id ht16k33_of_match[] = {
> -	{ .compatible = "holtek,ht16k33", },
> +	{
> +		/* 0.56" 4-Digit 7-Segment FeatherWing Display (Red) */
> +		.compatible = "adafruit,3108", .data = (void *)DISP_QUAD_7SEG,
> +	}, {
> +		/* 0.54" Quad Alphanumeric FeatherWing Display (Red) */
> +		.compatible = "adafruit,3130", .data = (void *)DISP_QUAD_14SEG,
> +	}, {
> +		/* Generic, assumed Dot-Matrix Display */
> +		.compatible = "holtek,ht16k33", .data = (void *)DISP_MATRIX,
> +	},
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, ht16k33_of_match);

  reply	other threads:[~2021-09-30  7:37 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-14 14:38 [PATCH v6 00/19] auxdisplay: ht16k33: Add character display support Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 01/19] uapi: Add <linux/map_to_14segment.h> Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 02/19] dt-bindings: auxdisplay: ht16k33: Document Adafruit segment displays Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 03/19] auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 04/19] auxdisplay: img-ascii-lcd: Add helper variable dev Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 05/19] auxdisplay: img-ascii-lcd: Convert device attribute to sysfs_emit() Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 06/19] auxdisplay: Extract character line display core support Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 07/19] auxdisplay: linedisp: Use kmemdup_nul() helper Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 08/19] auxdisplay: linedisp: Add support for changing scroll rate Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 09/19] auxdisplay: ht16k33: Connect backlight to fbdev Geert Uytterhoeven
2021-09-29 14:21   ` Robin van der Gracht
2021-09-14 14:38 ` [PATCH v6 10/19] auxdisplay: ht16k33: Use HT16K33_FB_SIZE in ht16k33_initialize() Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 11/19] auxdisplay: ht16k33: Remove unneeded error check in keypad probe() Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 12/19] auxdisplay: ht16k33: Convert to simple i2c probe function Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 13/19] auxdisplay: ht16k33: Add helper variable dev Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 14/19] auxdisplay: ht16k33: Move delayed work Geert Uytterhoeven
2021-09-30  6:36   ` Robin van der Gracht
2021-09-14 14:38 ` [PATCH v6 15/19] auxdisplay: ht16k33: Extract ht16k33_brightness_set() Geert Uytterhoeven
2021-09-30  6:58   ` Robin van der Gracht
2021-09-14 14:38 ` [PATCH v6 16/19] auxdisplay: ht16k33: Extract frame buffer probing Geert Uytterhoeven
2021-09-30  7:09   ` Robin van der Gracht
2021-09-14 14:38 ` [PATCH v6 17/19] auxdisplay: ht16k33: Add support for segment displays Geert Uytterhoeven
2021-09-30  7:37   ` Robin van der Gracht [this message]
2021-09-14 14:38 ` [PATCH v6 18/19] dt-bindings: auxdisplay: ht16k33: Document LED subnode Geert Uytterhoeven
2021-09-14 14:38 ` [PATCH v6 19/19] auxdisplay: ht16k33: Add LED support Geert Uytterhoeven
2021-09-30 10:57   ` Robin van der Gracht
2021-10-01 15:51     ` Geert Uytterhoeven
2021-10-04  8:26       ` Robin van der Gracht
2021-10-12 15:08         ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f902011b7be495219da31e4c1d561cfe@protonic.nl \
    --to=robin@protonic.nl \
    --cc=devicetree@vger.kernel.org \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=marek.behun@nic.cz \
    --cc=ojeda@kernel.org \
    --cc=paulburton@kernel.org \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.