[PATCH v2 5/5] net: gem: Enable ethernet rx clock for versal

[Michal Simek <michal.simek@xilinx.com>]

From: T Karthik Reddy <t.karthik.reddy@xilinx.com>

Enable rx clock along with tx clock for versal platform. Use compatible
data to enable/disable clocks in the driver.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
---

Changes in v2:
- Use compatible data instead of CONFIG_

 drivers/net/zynq_gem.c | 33 +++++++++++++++++++++++++++------
 1 file changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 22237de66bc7..d6f58d87c873 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -129,6 +129,8 @@
 #define ZYNQ_GEM_FREQUENCY_100	25000000UL
 #define ZYNQ_GEM_FREQUENCY_1000	125000000UL
 
+#define RXCLK_EN		BIT(0)
+
 /* Device registers */
 struct zynq_gem_regs {
 	u32 nwctrl; /* 0x0 - Network Control reg */
@@ -205,10 +207,12 @@ struct zynq_gem_priv {
 	struct phy_device *phydev;
 	ofnode phy_of_node;
 	struct mii_dev *bus;
-	struct clk clk;
+	struct clk rx_clk;
+	struct clk tx_clk;
 	u32 max_speed;
 	bool int_pcs;
 	bool dma_64bit;
+	u32 clk_en_info;
 };
 
 static int phy_setup_op(struct zynq_gem_priv *priv, u32 phy_addr, u32 regnum,
@@ -476,18 +480,25 @@ static int zynq_gem_init(struct udevice *dev)
 		break;
 	}
 
-	ret = clk_set_rate(&priv->clk, clk_rate);
+	ret = clk_set_rate(&priv->tx_clk, clk_rate);
 	if (IS_ERR_VALUE(ret)) {
 		dev_err(dev, "failed to set tx clock rate\n");
 		return ret;
 	}
 
-	ret = clk_enable(&priv->clk);
+	ret = clk_enable(&priv->tx_clk);
 	if (ret) {
 		dev_err(dev, "failed to enable tx clock\n");
 		return ret;
 	}
 
+	if (priv->clk_en_info & RXCLK_EN) {
+		ret = clk_enable(&priv->rx_clk);
+		if (ret) {
+			dev_err(dev, "failed to enable rx clock\n");
+			return ret;
+		}
+	}
 	setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
 					ZYNQ_GEM_NWCTRL_TXEN_MASK);
 
@@ -694,12 +705,20 @@ static int zynq_gem_probe(struct udevice *dev)
 	priv->tx_bd = (struct emac_bd *)bd_space;
 	priv->rx_bd = (struct emac_bd *)((ulong)bd_space + BD_SEPRN_SPACE);
 
-	ret = clk_get_by_name(dev, "tx_clk", &priv->clk);
+	ret = clk_get_by_name(dev, "tx_clk", &priv->tx_clk);
 	if (ret < 0) {
-		dev_err(dev, "failed to get clock\n");
+		dev_err(dev, "failed to get tx_clock\n");
 		goto err1;
 	}
 
+	if (priv->clk_en_info & RXCLK_EN) {
+		ret = clk_get_by_name(dev, "rx_clk", &priv->rx_clk);
+		if (ret < 0) {
+			dev_err(dev, "failed to get rx_clock\n");
+			goto err1;
+		}
+	}
+
 	priv->bus = mdio_alloc();
 	priv->bus->read = zynq_gem_miiphy_read;
 	priv->bus->write = zynq_gem_miiphy_write;
@@ -792,11 +811,13 @@ static int zynq_gem_of_to_plat(struct udevice *dev)
 	       (ulong)priv->iobase, (ulong)priv->mdiobase, priv->phyaddr,
 	       phy_string_for_interface(priv->interface));
 
+	priv->clk_en_info = dev_get_driver_data(dev);
+
 	return 0;
 }
 
 static const struct udevice_id zynq_gem_ids[] = {
-	{ .compatible = "cdns,versal-gem" },
+	{ .compatible = "cdns,versal-gem", .data = RXCLK_EN },
 	{ .compatible = "cdns,zynqmp-gem" },
 	{ .compatible = "cdns,zynq-gem" },
 	{ .compatible = "cdns,gem" },
-- 
2.30.0