From mboxrd@z Thu Jan 1 00:00:00 1970 From: Baruch Siach Date: Sun, 24 Sep 2017 15:50:18 +0300 Subject: [U-Boot] [PATCH v2 2/2] arm: mvebu: clearfog: document boot from UART In-Reply-To: References: Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Baruch Siach --- board/solidrun/clearfog/README | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README index 2cfa5bfc8637..ef1e3bf42666 100644 --- a/board/solidrun/clearfog/README +++ b/board/solidrun/clearfog/README @@ -16,3 +16,23 @@ $ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1 Please use the correct device node for your setup instead of "/dev/sdX" here! + +Boot from UART: +--------------- + +Connect the on-board micro-USB (CF Pro: CON11, CF Base: CON5) +to your host. + +Set the SW1 DIP switches to UART boot (0: OFF, 1: ON): + + ClearFog Base: 01001 + ClearFog Pro: 11110 + +Run the following command to initiate U-Boot download: + + ./tools/kwboot -b u-boot-spl.kwb /dev/ttyUSBX + +Use the correct UART device node for /dev/ttyUSBX. + +When download finishes start your favorite terminal emulator +on /dev/ttyUSBX. -- 2.14.1