From: Dirk Gouders <dirk@gouders.net>
To: Bjorn Helgaas <bhelgaas@google.com>, Yinghai Lu <yinghai@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Andreas Noever <andreas.noever@gmail.com>,
Linux Kernel <linux-kernel@vger.kernel.org>,
"linux-pci\@vger.kernel.org" <linux-pci@vger.kernel.org>
Subject: Re: [BUG] Bisected Problem with LSI PCI FC Adapter
Date: Fri, 12 Sep 2014 13:11:34 +0200 [thread overview]
Message-ID: <ghzje5f5zt.fsf@lena.gouders.net> (raw)
In-Reply-To: <ghvbotd8es.fsf@quad.gouders.net> (Dirk Gouders's message of "Fri, 12 Sep 2014 01:50:03 +0200")
Dirk Gouders <dirk@gouders.net> writes:
> Bjorn Helgaas <bhelgaas@google.com> writes:
>
>> On Thu, Sep 11, 2014 at 3:24 PM, Dirk Gouders <dirk@gouders.net> wrote:
>>> Bjorn Helgaas <bhelgaas@google.com> writes:
>>>
>>>> On Thu, Sep 11, 2014 at 2:33 PM, Dirk Gouders <dirk@gouders.net> wrote:
>>>>> What I was currently trying was to construct a test-environment so that
>>>>> I do not need to do tests and diagnosis on a busy machine.
>>>>>
>>>>> I noticed that this problem seems to start with the narrow Root
>>>>> Bridge window (00-07) but every other machine that I had a look at,
>>>>> starts with (00-ff), so those will not trigger my problem.
>>>>>
>>>>> I thought I could perhaps try to shrink the window in
>>>>> acpi_pci_root_add() to trigger the problem and that kind of works: it
>>>>> triggers it but not exactly the same way, because it basically ends at
>>>>> this code in pci_scan_bridge():
>>>>>
>>>>> if (max >= bus->busn_res.end) {
>>>>> dev_warn(&dev->dev, "can't allocate child bus %02x from %pR (pass %d)\n",
>>>>> max, &bus->busn_res, pass);
>>>>> goto out;
>>>>> }
>>>>>
>>>>> If this could work but I am just missing a small detail, I would be
>>>>> glad to hear about it and do the first tests this way. If it is
>>>>> complete nonsense, I will just use the machine that triggers the problem
>>>>> for the tests.
>>>>
>>>> I was about to suggest the same thing. If the problem is related to
>>>> the bus number change, we should be able to force that to happen on a
>>>> different machine. Your approach sounds good, so I'm guessing we just
>>>> need a tweak.
>>>>
>>>> I would first double-check that the PCI adapters are identical,
>>>> including the firmware on the card. Can you also include your patch
>>>> and the resulting dmesg (with debug enabled as before)?
>>>
>>> Currently I am at home doing just tests for understanding and that I can
>>> hopefully use when I am back in the office.
>>>
>>> I already noticed the the backup FC Adapter on the test machine is not
>>> exactly the same: it is Rev. 1 whereas the one on the failing machine is
>>> Rev. 2.
>>>
>>> So, here at home my tests let a NIC disappear. Different from the
>>> original problem but I was just trying to reconstruct the szenario of a
>>> misconfigured bridge causing a reconfiguration.
>>>
>>> What I was trying is:
>>>
>>> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
>>> index e6ae603..fd146b3 100644
>>> --- a/drivers/acpi/pci_root.c
>>> +++ b/drivers/acpi/pci_root.c
>>> @@ -556,6 +556,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
>>> strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
>>> strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
>>> device->driver_data = root;
>>> + root->secondary.end = 0x02;
>>>
>>> pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
>>> acpi_device_name(device), acpi_device_bid(device),
>>>
>>> The device that disappears is a NIC:
>>>
>>> 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
>>> 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
>>> 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
>>> 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
>>> 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
>>> 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
>>> 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
>>> 00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
>>> 00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
>>> 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
>>> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
>>> 00:1f.0 ISA bridge: Intel Corporation B75 Express Chipset LPC Controller (rev 04)
>>> 00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
>>> 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
>>> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
>>>
>>> This is the one that is missing with the above change:
>>> 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
>>
>> This situation is a little different, so I don't think you're
>> reproducing the situation we want to test. On this box, you have:
>>
>> pci_bus 0000:00: root bus resource [bus 00-02]
>> pci 0000:00:1c.0: PCI bridge to [bus 01]
>> pci 0000:00:1c.4: PCI bridge to [bus 02]
>>
>> so we find all the devices on bus 00 and bus 02 (there's nothing on
>> bus 01). My guess is the 03:00.0 device is normally behind the
>> 00:1c.5 bridge, but we don't even scan behind that bridge because we
>> can't allocate a secondary bus number for it (we're not smart enough
>> to take advantage of the empty bus 01).
>>
>> On the failing box, it's different because we *do* have unused bus
>> number space, and we do actually reconfigure the bridge to use it.
>> It's just that the FC adapter doesn't respond when we use the new bus
>> number for it.
>>
>> You might be able to do something similar on the test box by:
>>
>> - Keeping your root->secondary.end = 02 patch, so you still have [bus 00-02].
>> - Ignoring bridges 00:1c.0 and 00:1c.4. I would just test for those
>> devfns in pci_scan_device() and when you see them, return NULL instead
>> of trying to read the vendor ID.
>>
>> Then 00:1c.5 is probably configured by the BIOS for [bus 03], but
>> that's outside the root bridge range, so we should reconfigure it to
>> use [bus 01]. Then we should scan behind it, and we'll probably
>> discover the NIC that was previously at 03:00.0. The device *should*
>> just work at the new bus number, since it probably doesn't have the
>> same bug the FC adapter does.
>
> Thanks for the explanation. I tried to ignore the two bridges but the
> machine stopped with the "reconfiguring" message.
>
> Anyway, if I understood you correctly with the backup FC adapter I have
> good chances, because there is the needed unused bus number space and I
> don't have to ignore bridges. I will test in a few hours and report.
It turned out that there is no unused bus number space on the test
machine:
-[0000:00]-+-01.0-[01-02]--+-0d.0-[02]--
| +-0e.0 Broadcom BCM5785 [HT1000] SATA (PATA/IDE Mode)
| \-0e.1 Broadcom BCM5785 [HT1000] SATA (PATA/IDE Mode)
+-02.0 Broadcom BCM5785 [HT1000] Legacy South Bridge
+-02.1 Broadcom BCM5785 [HT1000] IDE
+-02.2 Broadcom BCM5785 [HT1000] LPC
+-03.0 Broadcom BCM5785 [HT1000] USB
+-03.1 Broadcom BCM5785 [HT1000] USB
+-03.2 Broadcom BCM5785 [HT1000] USB
+-06.0-[03]--
+-07.0-[04]--+-04.0 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet
| \-04.1 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet
+-08.0-[05]--
+-09.0-[06]--
+-0a.0-[07]----00.0 LSI Logic / Symbios Logic FC949ES Fibre Channel Adapter
+-0b.0-[08]--
+-0c.0 Advanced Micro Devices, Inc. [AMD/ATI] ES1000
+-18.0 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
+-18.1 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
+-18.2 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
+-18.3 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
+-19.0 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
+-19.1 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
+-19.2 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
\-19.3 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
So, I used the following changes to create the space and limit the root
bridge window:
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index e6ae603..a41066b 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -556,6 +556,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
device->driver_data = root;
+ root->secondary.end = 0x06;
pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
acpi_device_name(device), acpi_device_bid(device),
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2..d8dc02d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1323,6 +1323,9 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
struct pci_dev *dev;
u32 l;
+ if (devfn == PCI_DEVFN(0x08, 0) || devfn == PCI_DEVFN(0x09,0))
+ return NULL;
+
if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
return NULL;
And to me it looks as if that is the situation, I need for testing
Yinghai's patches; the FC Adapter disappeared similar to that on the
other machine (find the dmesg output at the end):
-[0000:00]-+-01.0-[01-02]--+-0d.0-[02]--
| +-0e.0 Broadcom BCM5785 [HT1000] SATA (PATA/IDE Mode)
| \-0e.1 Broadcom BCM5785 [HT1000] SATA (PATA/IDE Mode)
+-02.0 Broadcom BCM5785 [HT1000] Legacy South Bridge
+-02.1 Broadcom BCM5785 [HT1000] IDE
+-02.2 Broadcom BCM5785 [HT1000] LPC
+-03.0 Broadcom BCM5785 [HT1000] USB
+-03.1 Broadcom BCM5785 [HT1000] USB
+-03.2 Broadcom BCM5785 [HT1000] USB
+-06.0-[03]--
+-07.0-[04]--+-04.0 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet
| \-04.1 Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet
+-0a.0-[05]--
+-0b.0-[06]--
+-0c.0 Advanced Micro Devices, Inc. [AMD/ATI] ES1000
+-18.0 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
+-18.1 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
+-18.2 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
+-18.3 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
+-19.0 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
+-19.1 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
+-19.2 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
\-19.3 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
So, I wanted to test the patches but unfortunately, the patches do not
apply cleanly; git am refuses to take the files (unknown format) and git
apply gives errors. I tried to apply them against Linus' current, v3.16,
v3.15 and v3.14. What am I probably doing wrong, Yinghai?
Dirk
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.0-rc4+ (root@kapro) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #8 SMP Fri Sep 12 12:56:42 CEST 2014
[ 0.000000] Command line: root=/dev/sda2 dyndbg="file drivers/pci/* +fp" log_buf_len=10M
[ 0.000000] tseg: 0000000000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fffe000-0x000000007fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec02fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: empty empty/TYAN Thunder K8HM S3892, BIOS 080011 09/20/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x200000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0100000000 mask FF00000000 write-back
[ 0.000000] 1 base 0000000000 mask FF80000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x020ea000, 0x020eafff] PGTABLE
[ 0.000000] BRK [0x020eb000, 0x020ebfff] PGTABLE
[ 0.000000] BRK [0x020ec000, 0x020ecfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1ffe00000-0x1ffffffff]
[ 0.000000] [mem 0x1ffe00000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x020ed000, 0x020edfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1fc000000-0x1ffdfffff]
[ 0.000000] [mem 0x1fc000000-0x1ffdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1fbffffff]
[ 0.000000] [mem 0x180000000-0x1fbffffff] page 2M
[ 0.000000] BRK [0x020ee000, 0x020eefff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7ffeffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fdfffff] page 2M
[ 0.000000] [mem 0x7fe00000-0x7ffeffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
[ 0.000000] BRK [0x020ef000, 0x020effff] PGTABLE
[ 0.000000] log_buf_len: 16777216 bytes
[ 0.000000] early log buf free: 258396(98%)
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F75F0 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000007FFF0100 000034 (v01 A M I OEMXSDT 09000620 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000007FFF0290 0000F4 (v03 A M I OEMFACP 09000620 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000007FFF0480 003D81 (v01 0AAAA 0AAAA000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 0x000000007FFFE000 000040
[ 0.000000] ACPI: APIC 0x000000007FFF0390 000080 (v01 A M I OEMAPIC 09000620 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of physical nodes 2
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000080000000
[ 0.000000] Node 1 MemBase 0000000100000000 Limit 0000000200000000
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fffffff]
[ 0.000000] NODE_DATA [mem 0x7ffec000-0x7ffeffff]
[ 0.000000] Initmem setup node 1 [mem 0x100000000-0x1ffffffff]
[ 0.000000] NODE_DATA [mem 0x1feff9000-0x1feffcfff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0
[ 0.000000] [ffffea0004000000-ffffea0007ffffff] PMD -> [ffff8801fa600000-ffff8801fe5fffff] on node 1
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffeffff]
[ 0.000000] node 1: [mem 0x100000000-0x1ffffffff]
[ 0.000000] On node 0 totalpages: 524174
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520176 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fff0000-0x7fffdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fffe000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec03000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007dc00000 s79424 r8192 d22976 u1048576
[ 0.000000] pcpu-alloc: s79424 r8192 d22976 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 2 [1] 1 3
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1548153
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda2 dyndbg="file drivers/pci/* +fp" log_buf_len=10M
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6092248K/6291000K available (8607K kernel code, 969K rwdata, 2840K rodata, 1076K init, 896K bss, 198752K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:864 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.191 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.001141] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.38 BogoMIPS (lpj=1995191)
[ 0.001412] pid_max: default: 32768 minimum: 301
[ 0.001558] ACPI: Core revision 20140724
[ 0.005499] ACPI: All ACPI Tables successfully acquired
[ 0.006058] Security Framework initialized
[ 0.006204] SELinux: Initializing.
[ 0.006341] SELinux: Starting in permissive mode
[ 0.007278] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015222] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018744] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018899] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019530] Initializing cgroup subsys freezer
[ 0.019692] mce: CPU supports 5 MCE banks
[ 0.019836] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.020148] Freeing SMP alternatives memory: 28K (ffffffff82001000 - ffffffff82008000)
[ 0.021613] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.022000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.022000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.022000] ..... (found apic 0 pin 2) ...
[ 0.033518] ....... works.
[ 0.033648] smpboot: CPU0: AMD Opteron(tm) Processor 246 (fam: 0f, model: 05, stepping: 0a)
[ 0.035000] APIC calibration not consistent with PM-Timer: 96ms instead of 100ms
[ 0.035000] APIC delta adjusted to PM-Timer: 1246873 (1209285)
[ 0.035000] Performance Events: AMD PMU driver.
[ 0.035000] ... version: 0
[ 0.035000] ... bit width: 48
[ 0.035000] ... generic registers: 4
[ 0.035000] ... value mask: 0000ffffffffffff
[ 0.035000] ... max period: 00007fffffffffff
[ 0.035000] ... fixed-purpose events: 0
[ 0.035000] ... event mask: 000000000000000f
[ 0.036443] MCE: In-kernel MCE decoding enabled.
[ 0.036814] x86: Booting SMP configuration:
[ 0.036948] .... node #1, CPUs: #1
[ 0.108137] x86: Booted up 2 nodes, 2 CPUs
[ 0.108392] smpboot: Total of 2 processors activated (7980.22 BogoMIPS)
[ 0.109252] devtmpfs: initialized
[ 0.110139] PM: Registering ACPI NVS region [mem 0x7fffe000-0x7fffffff] (8192 bytes)
[ 0.111005] RTC time: 10:57:51, date: 09/12/14
[ 0.111292] NET: Registered protocol family 16
[ 0.111644] cpuidle: using governor ladder
[ 0.111779] cpuidle: using governor menu
[ 0.111924] node 0 link 0: io port [1000, ffffff]
[ 0.111931] TOM: 0000000080000000 aka 2048M
[ 0.112010] node 0 link 0: mmio [a0000, bffff]
[ 0.112014] node 0 link 0: mmio [80000000, ff70ffff]
[ 0.112016] TOM2: 0000000200000000 aka 8192M
[ 0.112150] bus: [bus 00-ff] on node 0 link 0
[ 0.112152] bus: 00 [io 0x0000-0xffff]
[ 0.112154] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.112156] bus: 00 [mem 0x80000000-0xffffffff]
[ 0.112157] bus: 00 [mem 0x200000000-0xfcffffffff]
[ 0.112216] ACPI: bus type PCI registered
[ 0.112419] PCI: Using configuration type 1 for base access
[ 0.116037] kworker/u9:0 (20) used greatest stack depth: 14912 bytes left
[ 0.117311] kworker/u9:0 (23) used greatest stack depth: 14280 bytes left
[ 0.117556] kworker/u9:0 (26) used greatest stack depth: 13880 bytes left
[ 0.121799] ACPI: Added _OSI(Module Device)
[ 0.121799] ACPI: Added _OSI(Processor Device)
[ 0.122004] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.122141] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.124332] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.126802] ACPI: Interpreter enabled
[ 0.126955] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.127270] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140724/hwxface-580)
[ 0.127600] ACPI: (supports S0 S1 S4 S5)
[ 0.127736] ACPI: Using IOAPIC for interrupt routing
[ 0.127938] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.136770] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-06])
[ 0.136925] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.137012] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.137301] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.137304] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.137307] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.137310] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.137312] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.137315] PCI: root bus 00: hardware-probed resources
[ 0.137322] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.137598] PCI host bridge to bus 0000:00
[ 0.137736] pci_bus 0000:00: root bus resource [bus 00-06]
[ 0.137876] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.138007] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.138149] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[ 0.138291] pci_bus 0000:00: root bus resource [mem 0x200000000-0xfcffffffff]
[ 0.138436] pci_scan_child_bus: pci_bus 0000:00: scanning bus
[ 0.138458] pci 0000:00:01.0: [1166:0036] type 01 class 0x060400
[ 0.138501] fixup_debug_start: pci 0000:00:01.0: calling ht_enable_msi_mapping+0x0/0xb0
[ 0.138509] pci 0000:00:01.0: Enabling HT MSI Mapping
[ 0.140117] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.140366] pci 0000:00:02.0: [1166:0205] type 00 class 0x060000
[ 0.140381] fixup_debug_start: pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x10
[ 0.141124] pci 0000:00:02.1: [1166:0214] type 00 class 0x01018a
[ 0.141131] fixup_debug_start: pci 0000:00:02.1: calling quirk_no_ata_d3+0x0/0x10
[ 0.141145] pci 0000:00:02.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.141156] pci 0000:00:02.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.141166] pci 0000:00:02.1: reg 0x18: [io 0x0170-0x0177]
[ 0.141175] pci 0000:00:02.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.141185] pci 0000:00:02.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.141206] pci 0000:00:02.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.141346] pci 0000:00:02.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.141484] pci 0000:00:02.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.141622] pci 0000:00:02.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.141834] pci 0000:00:02.2: [1166:0234] type 00 class 0x060100
[ 0.141986] pci 0000:00:03.0: [1166:0223] type 00 class 0x0c0310
[ 0.142010] pci 0000:00:03.0: reg 0x10: [mem 0xff6e8000-0xff6e8fff]
[ 0.142020] pci 0000:00:03.0: reg 0x14: [io 0xd400-0xd4ff]
[ 0.142124] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.142321] pci 0000:00:03.1: [1166:0223] type 00 class 0x0c0310
[ 0.142340] pci 0000:00:03.1: reg 0x10: [mem 0xff6e9000-0xff6e9fff]
[ 0.142350] pci 0000:00:03.1: reg 0x14: [io 0xd800-0xd8ff]
[ 0.142453] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 0.142645] pci 0000:00:03.2: [1166:0223] type 00 class 0x0c0320
[ 0.142663] pci 0000:00:03.2: reg 0x10: [mem 0xff6ea000-0xff6eafff]
[ 0.142673] pci 0000:00:03.2: reg 0x14: [io 0xe800-0xe8ff]
[ 0.142740] pci 0000:00:03.2: supports D1 D2
[ 0.142743] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
[ 0.142750] pci_pme_active: pci 0000:00:03.2: PME# disabled
[ 0.142789] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 0.142985] pci 0000:00:06.0: [1166:0130] type 01 class 0x060400
[ 0.143067] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.143256] pci 0000:00:07.0: [1166:0130] type 01 class 0x060400
[ 0.143321] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.143509] pci 0000:00:0a.0: [1166:0132] type 01 class 0x060400
[ 0.143571] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.143760] pci 0000:00:0b.0: [1166:0132] type 01 class 0x060400
[ 0.143864] pci 0000:00:0c.0: [1002:515e] type 00 class 0x030000
[ 0.143883] pci 0000:00:0c.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.143894] pci 0000:00:0c.0: reg 0x14: [io 0xe000-0xe0ff]
[ 0.143905] pci 0000:00:0c.0: reg 0x18: [mem 0xff6f0000-0xff6fffff]
[ 0.143939] pci 0000:00:0c.0: reg 0x30: [mem 0xff6c0000-0xff6dffff pref]
[ 0.143968] pci 0000:00:0c.0: supports D1 D2
[ 0.144059] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.144064] fixup_debug_start: pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x10
[ 0.144150] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.144155] fixup_debug_start: pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x10
[ 0.144227] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.144232] fixup_debug_start: pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x10
[ 0.144306] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.144311] fixup_debug_start: pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x10
[ 0.144389] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
[ 0.144394] fixup_debug_start: pci 0000:00:19.0: calling quirk_mmio_always_on+0x0/0x10
[ 0.144528] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
[ 0.144533] fixup_debug_start: pci 0000:00:19.1: calling quirk_mmio_always_on+0x0/0x10
[ 0.144614] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
[ 0.144619] fixup_debug_start: pci 0000:00:19.2: calling quirk_mmio_always_on+0x0/0x10
[ 0.144696] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
[ 0.144701] fixup_debug_start: pci 0000:00:19.3: calling quirk_mmio_always_on+0x0/0x10
[ 0.144783] pci_scan_child_bus: pci_bus 0000:00: fixups for bus
[ 0.144788] pci_scan_bridge: pci 0000:00:01.0: scanning [bus 01-02] behind bridge, pass 0
[ 0.144841] pci_scan_child_bus: pci_bus 0000:01: scanning bus
[ 0.144862] pci 0000:01:0d.0: [1166:0104] type 01 class 0x060400
[ 0.144966] pci 0000:01:0e.0: [1166:024b] type 00 class 0x01018f
[ 0.144974] fixup_debug_start: pci 0000:01:0e.0: calling quirk_no_ata_d3+0x0/0x10
[ 0.144983] pci 0000:01:0e.0: reg 0x10: [io 0x8080-0x8087]
[ 0.144991] pci 0000:01:0e.0: reg 0x14: [io 0x8000-0x8003]
[ 0.144998] pci 0000:01:0e.0: reg 0x18: [io 0x7c00-0x7c07]
[ 0.145008] pci 0000:01:0e.0: reg 0x1c: [io 0x7880-0x7883]
[ 0.145015] pci 0000:01:0e.0: reg 0x20: [io 0x7800-0x780f]
[ 0.145023] pci 0000:01:0e.0: reg 0x24: [mem 0xff1fe000-0xff1fffff]
[ 0.145031] pci 0000:01:0e.0: reg 0x30: [mem 0xff1c0000-0xff1dffff pref]
[ 0.145119] pci 0000:01:0e.1: [1166:024b] type 00 class 0x01018f
[ 0.145126] fixup_debug_start: pci 0000:01:0e.1: calling quirk_no_ata_d3+0x0/0x10
[ 0.145136] pci 0000:01:0e.1: reg 0x10: [io 0x8c00-0x8c07]
[ 0.145143] pci 0000:01:0e.1: reg 0x14: [io 0x8880-0x8883]
[ 0.145150] pci 0000:01:0e.1: reg 0x18: [io 0x8800-0x8807]
[ 0.145158] pci 0000:01:0e.1: reg 0x1c: [io 0x8480-0x8483]
[ 0.145165] pci 0000:01:0e.1: reg 0x20: [io 0x8400-0x840f]
[ 0.145267] pci_scan_child_bus: pci_bus 0000:01: fixups for bus
[ 0.145270] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.145409] pci 0000:00:01.0: bridge window [io 0x7000-0x8fff]
[ 0.145413] pci 0000:00:01.0: bridge window [mem 0xff100000-0xff1fffff]
[ 0.145420] pci_scan_bridge: pci 0000:01:0d.0: scanning [bus 02-02] behind bridge, pass 0
[ 0.145458] pci_scan_child_bus: pci_bus 0000:02: scanning bus
[ 0.145490] pci_scan_child_bus: pci_bus 0000:02: fixups for bus
[ 0.145493] pci 0000:01:0d.0: PCI bridge to [bus 02]
[ 0.145634] pci_scan_child_bus: pci_bus 0000:02: bus scan returning with max=02
[ 0.145640] pci_scan_bridge: pci 0000:01:0d.0: scanning [bus 02-02] behind bridge, pass 1
[ 0.145644] pci_scan_child_bus: pci_bus 0000:01: bus scan returning with max=02
[ 0.145649] pci_scan_bridge: pci 0000:00:06.0: scanning [bus 03-03] behind bridge, pass 0
[ 0.145686] pci_scan_child_bus: pci_bus 0000:03: scanning bus
[ 0.145714] pci_scan_child_bus: pci_bus 0000:03: fixups for bus
[ 0.145716] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.145856] pci_scan_child_bus: pci_bus 0000:03: bus scan returning with max=03
[ 0.145860] pci_scan_bridge: pci 0000:00:07.0: scanning [bus 04-04] behind bridge, pass 0
[ 0.145893] pci_scan_child_bus: pci_bus 0000:04: scanning bus
[ 0.145908] pci 0000:04:04.0: [14e4:166a] type 00 class 0x020000
[ 0.145921] pci 0000:04:04.0: reg 0x10: [mem 0xff2d0000-0xff2dffff 64bit]
[ 0.145930] pci 0000:04:04.0: reg 0x18: [mem 0xff2c0000-0xff2cffff 64bit]
[ 0.145968] pci 0000:04:04.0: PME# supported from D3hot D3cold
[ 0.145972] pci_pme_active: pci 0000:04:04.0: PME# disabled
[ 0.145993] pci 0000:04:04.0: System wakeup disabled by ACPI
[ 0.146061] pci 0000:04:04.1: [14e4:166a] type 00 class 0x020000
[ 0.146073] pci 0000:04:04.1: reg 0x10: [mem 0xff2f0000-0xff2fffff 64bit]
[ 0.146082] pci 0000:04:04.1: reg 0x18: [mem 0xff2e0000-0xff2effff 64bit]
[ 0.146120] pci 0000:04:04.1: PME# supported from D3hot D3cold
[ 0.146124] pci_pme_active: pci 0000:04:04.1: PME# disabled
[ 0.146146] pci 0000:04:04.1: System wakeup disabled by ACPI
[ 0.146347] pci_scan_child_bus: pci_bus 0000:04: fixups for bus
[ 0.146350] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.146487] pci 0000:00:07.0: bridge window [mem 0xff200000-0xff2fffff]
[ 0.146492] pci 0000:00:07.0: bridge window [mem 0xcfd00000-0xcfdfffff 64bit pref]
[ 0.146495] pci_scan_child_bus: pci_bus 0000:04: bus scan returning with max=04
[ 0.146500] pci_scan_bridge: pci 0000:00:0a.0: scanning [bus 07-07] behind bridge, pass 0
[ 0.146503] pci 0000:00:0a.0: bridge configuration invalid ([bus 07-07]), reconfiguring
[ 0.146725] pci_scan_bridge: pci 0000:00:0b.0: scanning [bus 08-08] behind bridge, pass 0
[ 0.146727] pci 0000:00:0b.0: bridge configuration invalid ([bus 08-08]), reconfiguring
[ 0.147010] pci_scan_bridge: pci 0000:00:01.0: scanning [bus 01-02] behind bridge, pass 1
[ 0.147016] pci_scan_bridge: pci 0000:00:06.0: scanning [bus 03-03] behind bridge, pass 1
[ 0.147021] pci_scan_bridge: pci 0000:00:07.0: scanning [bus 04-04] behind bridge, pass 1
[ 0.147026] pci_scan_bridge: pci 0000:00:0a.0: scanning [bus 00-00] behind bridge, pass 1
[ 0.147065] pci_scan_child_bus: pci_bus 0000:05: scanning bus
[ 0.147069] pci_scan_child_bus: pci_bus 0000:05: fixups for bus
[ 0.147072] pci 0000:00:0a.0: PCI bridge to [bus 05-06]
[ 0.147210] pci 0000:00:0a.0: bridge window [io 0x9000-0xbfff]
[ 0.147214] pci 0000:00:0a.0: bridge window [mem 0xff300000-0xff5fffff]
[ 0.147218] pci 0000:00:0a.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
[ 0.147222] pci_scan_child_bus: pci_bus 0000:05: bus scan returning with max=05
[ 0.147226] pci_bus 0000:05: busn_res: [bus 05-06] end is updated to 05
[ 0.147231] pci_scan_bridge: pci 0000:00:0b.0: scanning [bus 00-00] behind bridge, pass 1
[ 0.147271] pci_scan_child_bus: pci_bus 0000:06: scanning bus
[ 0.147275] pci_scan_child_bus: pci_bus 0000:06: fixups for bus
[ 0.147278] pci 0000:00:0b.0: PCI bridge to [bus 06]
[ 0.147417] pci_scan_child_bus: pci_bus 0000:06: bus scan returning with max=06
[ 0.147420] pci_bus 0000:06: busn_res: [bus 06] end is updated to 06
[ 0.147424] pci_scan_child_bus: pci_bus 0000:00: bus scan returning with max=06
[ 0.147428] pci_bus 0000:00: on NUMA node 0
[ 0.148297] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 11 12 14 15) *0, disabled.
[ 0.149072] ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 6 7 9 *11 12 14 15)
[ 0.149794] ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.150758] ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.152063] ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.153118] ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.154046] ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.154970] ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.155867] ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.156776] ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.157729] ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 *5 6 7 9 11 12 14 15)
[ 0.158465] ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 6 7 *9 11 12 14 15)
[ 0.159238] ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.160066] ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.161065] ACPI: PCI Interrupt Link [LN14] (IRQs *3 4 5 6 7 9 11 12 14 15)
[ 0.161813] ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.162730] ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.163684] ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.164594] ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.165502] ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.166458] ACPI: PCI Interrupt Link [LN20] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.167365] ACPI: PCI Interrupt Link [LN21] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.168193] ACPI: PCI Interrupt Link [LN22] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.169192] ACPI: PCI Interrupt Link [LN23] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.170065] ACPI: PCI Interrupt Link [LN24] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.171066] ACPI: PCI Interrupt Link [LN25] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.172018] ACPI: PCI Interrupt Link [LN26] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.172937] ACPI: PCI Interrupt Link [LN27] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.173821] ACPI: PCI Interrupt Link [LN28] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.174776] ACPI: PCI Interrupt Link [LN29] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.175684] ACPI: PCI Interrupt Link [LN30] (IRQs 3 4 5 6 7 9 11 12 14 15) *0, disabled.
[ 0.176616] ACPI: PCI Interrupt Link [LNUS] (IRQs *10)
[ 0.177008] ACPI: PCI Interrupt Link [LNSA] (IRQs *11)
[ 0.177640] vgaarb: device added: PCI:0000:00:0c.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.177875] vgaarb: loaded
[ 0.178006] vgaarb: bridge control possible 0000:00:0c.0
[ 0.178300] SCSI subsystem initialized
[ 0.178542] libata version 3.00 loaded.
[ 0.178618] ACPI: bus type USB registered
[ 0.178799] usbcore: registered new interface driver usbfs
[ 0.178959] usbcore: registered new interface driver hub
[ 0.179040] usbcore: registered new device driver usb
[ 0.179232] pps_core: LinuxPPS API ver. 1 registered
[ 0.179369] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.179603] PTP clock support registered
[ 0.179787] Advanced Linux Sound Architecture Driver Initialized.
[ 0.180009] PCI: Using ACPI for IRQ routing
[ 0.180150] PCI: pci_cache_line_size set to 64 bytes
[ 0.180213] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.180217] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[ 0.180583] NetLabel: Initializing
[ 0.180720] NetLabel: domain hash size = 128
[ 0.180857] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.181022] NetLabel: unlabeled traffic allowed by default
[ 0.181184] cfg80211: Calling CRDA to update world regulatory domain
[ 0.181478] Switched to clocksource refined-jiffies
[ 0.193198] pnp: PnP ACPI init
[ 0.193479] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.194046] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.194184] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.194322] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.194459] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.194596] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.194733] system 00:01: [io 0x040b] has been reserved
[ 0.194868] system 00:01: [io 0x04d6] has been reserved
[ 0.195003] system 00:01: [io 0x0c06-0x0c07] has been reserved
[ 0.195139] system 00:01: [io 0x0c14] has been reserved
[ 0.195277] system 00:01: [io 0x0c49] has been reserved
[ 0.195413] system 00:01: [io 0x0c4a] has been reserved
[ 0.195548] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.195685] system 00:01: [io 0x0c52] has been reserved
[ 0.195820] system 00:01: [io 0x0c6c] has been reserved
[ 0.195957] system 00:01: [io 0x0c6f] has been reserved
[ 0.196001] system 00:01: [io 0x0500-0x057f] could not be reserved
[ 0.196141] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196318] system 00:02: [io 0x0580-0x058f] has been reserved
[ 0.196456] system 00:02: [io 0x0590-0x0593] has been reserved
[ 0.196593] system 00:02: [io 0x0700-0x0703] has been reserved
[ 0.196730] system 00:02: [io 0x0ca0-0x0caf] has been reserved
[ 0.196869] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.197005] system 00:02: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.197145] system 00:02: [mem 0xfec02000-0xfec02fff] could not be reserved
[ 0.197284] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.197422] system 00:02: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.197561] system 00:02: [mem 0xff780000-0xffbfffff] has been reserved
[ 0.197700] system 00:02: [mem 0xfebfe000-0xfebfefff] has been reserved
[ 0.197842] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198105] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.198400] system 00:04: [io 0x0600-0x061f] has been reserved
[ 0.198538] system 00:04: [io 0x0520-0x053f] has been reserved
[ 0.198674] system 00:04: [io 0x0540-0x054f] has been reserved
[ 0.198811] system 00:04: [io 0x0640-0x065f] has been reserved
[ 0.198950] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.199046] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.199185] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.199348] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.199488] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.199627] system 00:06: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.199766] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.200423] pnp: PnP ACPI: found 7 devices
[ 0.207338] Switched to clocksource acpi_pm
[ 0.207547] pci 0000:01:0d.0: PCI bridge to [bus 02]
[ 0.207694] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.207834] pci 0000:00:01.0: bridge window [io 0x7000-0x8fff]
[ 0.207985] pci 0000:00:01.0: bridge window [mem 0xff100000-0xff1fffff]
[ 0.207985] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.207985] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.208124] pci 0000:00:07.0: bridge window [mem 0xff200000-0xff2fffff]
[ 0.208267] pci 0000:00:07.0: bridge window [mem 0xcfd00000-0xcfdfffff 64bit pref]
[ 0.208493] pci 0000:00:0a.0: PCI bridge to [bus 05]
[ 0.208633] pci 0000:00:0a.0: bridge window [io 0x9000-0xbfff]
[ 0.208774] pci 0000:00:0a.0: bridge window [mem 0xff300000-0xff5fffff]
[ 0.208919] pci 0000:00:0a.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref]
[ 0.209162] pci 0000:00:0b.0: PCI bridge to [bus 06]
[ 0.209305] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.209307] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.209310] pci_bus 0000:00: resource 6 [mem 0x80000000-0xffffffff]
[ 0.209313] pci_bus 0000:00: resource 7 [mem 0x200000000-0xfcffffffff]
[ 0.209315] pci_bus 0000:01: resource 0 [io 0x7000-0x8fff]
[ 0.209318] pci_bus 0000:01: resource 1 [mem 0xff100000-0xff1fffff]
[ 0.209322] pci_bus 0000:04: resource 1 [mem 0xff200000-0xff2fffff]
[ 0.209324] pci_bus 0000:04: resource 2 [mem 0xcfd00000-0xcfdfffff 64bit pref]
[ 0.209327] pci_bus 0000:05: resource 0 [io 0x9000-0xbfff]
[ 0.209330] pci_bus 0000:05: resource 1 [mem 0xff300000-0xff5fffff]
[ 0.209333] pci_bus 0000:05: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref]
[ 0.209409] NET: Registered protocol family 2
[ 0.209985] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.210693] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.211506] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.211769] TCP: reno registered
[ 0.211936] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.212224] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.212596] NET: Registered protocol family 1
[ 0.212912] RPC: Registered named UNIX socket transport module.
[ 0.213066] RPC: Registered udp transport module.
[ 0.213203] RPC: Registered tcp transport module.
[ 0.213344] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.213508] fixup_debug_start: pci 0000:00:02.0: calling quirk_disable_broadcom_boot_interrupt+0x0/0xb0
[ 0.213576] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205]
[ 0.213733] fixup_debug_start: pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x770
[ 0.286071] fixup_debug_start: pci 0000:00:03.1: calling quirk_usb_early_handoff+0x0/0x770
[ 0.358062] fixup_debug_start: pci 0000:00:03.2: calling quirk_usb_early_handoff+0x0/0x770
[ 0.358157] fixup_debug_start: pci 0000:00:0a.0: calling quirk_msi_ht_cap+0x0/0x50
[ 0.358163] pci 0000:00:0a.0: Found enabled HT MSI Mapping
[ 0.358302] fixup_debug_start: pci 0000:00:0b.0: calling quirk_msi_ht_cap+0x0/0x50
[ 0.358307] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[ 0.358447] fixup_debug_start: pci 0000:00:0c.0: calling pci_fixup_video+0x0/0x150
[ 0.358452] pci 0000:00:0c.0: Boot video device
[ 0.358460] fixup_debug_start: pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x80
[ 0.358467] fixup_debug_start: pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x80
[ 0.358474] fixup_debug_start: pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x80
[ 0.358480] fixup_debug_start: pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x80
[ 0.358487] fixup_debug_start: pci 0000:00:19.0: calling quirk_amd_nb_node+0x0/0x80
[ 0.358494] fixup_debug_start: pci 0000:00:19.1: calling quirk_amd_nb_node+0x0/0x80
[ 0.358501] fixup_debug_start: pci 0000:00:19.2: calling quirk_amd_nb_node+0x0/0x80
[ 0.358507] fixup_debug_start: pci 0000:00:19.3: calling quirk_amd_nb_node+0x0/0x80
[ 0.358522] fixup_debug_start: pci 0000:04:04.0: calling quirk_msi_intx_disable_bug+0x0/0x10
[ 0.358528] fixup_debug_start: pci 0000:04:04.1: calling quirk_msi_intx_disable_bug+0x0/0x10
[ 0.358532] PCI: CLS 64 bytes, default 64
[ 0.358633] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.358771] software IO TLB [mem 0x79c00000-0x7dc00000] (64MB) mapped at [ffff880079c00000-ffff88007dbfffff]
[ 0.359199] microcode: AMD CPU family 0xf not supported
[ 0.359749] Scanning for low memory corruption every 60 seconds
[ 0.360352] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.360550] audit: initializing netlink subsys (disabled)
[ 0.362531] audit: type=2000 audit(1410519471.361:1): initialized
[ 0.363140] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.366344] VFS: Disk quotas dquot_6.5.2
[ 0.366557] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.367716] NFS: Registering the id_resolver key type
[ 0.367877] Key type id_resolver registered
[ 0.368040] Key type id_legacy registered
[ 0.368285] msgmni has been set to 11898
[ 0.368524] SELinux: Registering netfilter hooks
[ 0.369260] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.369496] io scheduler noop registered
[ 0.369637] io scheduler deadline registered
[ 0.369871] io scheduler cfq registered (default)
[ 0.370232] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.370570] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.370807] ACPI: Power Button [PWRB]
[ 0.371022] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.371248] ACPI: Power Button [PWRF]
[ 0.371462] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
[ 0.371693] ACPI: Sleep Button [SLPF]
[ 0.372335] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.373326] Non-volatile memory driver v1.3
[ 0.373489] Linux agpgart interface v0.103
[ 0.374133] [drm] Initialized drm 1.1.0 20060810
[ 0.375605] loop: module loaded
[ 0.376025] sata_svw 0000:01:0e.0: version 2.3
[ 0.376812] scsi host0: sata_svw
[ 0.377315] scsi host1: sata_svw
[ 0.377618] scsi host2: sata_svw
[ 0.377890] scsi host3: sata_svw
[ 0.378156] ata1: SATA max UDMA/133 mmio m8192@0xff1fe000 port 0xff1fe000 irq 11
[ 0.378375] ata2: SATA max UDMA/133 mmio m8192@0xff1fe000 port 0xff1fe100 irq 11
[ 0.378593] ata3: SATA max UDMA/133 mmio m8192@0xff1fe000 port 0xff1fe200 irq 11
[ 0.378810] ata4: SATA max UDMA/133 mmio m8192@0xff1fe000 port 0xff1fe300 irq 11
[ 0.379863] scsi host4: pata_serverworks
[ 0.380195] scsi host5: pata_serverworks
[ 0.380380] ata5: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.380518] ata6: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.380807] tg3.c:v3.137 (May 11, 2014)
[ 0.393817] tg3 0000:04:04.0 eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:e0:81:47:5e:b0
[ 0.394063] tg3 0000:04:04.0 eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 0.394286] tg3 0000:04:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 0.394505] tg3 0000:04:04.0 eth0: dma_rwctrl[76144000] dma_mask[40-bit]
[ 0.409165] tg3 0000:04:04.1 eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:e0:81:47:5e:b1
[ 0.409393] tg3 0000:04:04.1 eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 0.409616] tg3 0000:04:04.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 0.409834] tg3 0000:04:04.1 eth1: dma_rwctrl[76144000] dma_mask[40-bit]
[ 0.410033] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.410189] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.410367] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.410508] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.410673] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.410811] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 0.410979] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 0.411156] sky2: driver version 1.30
[ 0.411540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.411686] ehci-pci: EHCI PCI platform driver
[ 0.411916] __pci_set_master: ehci-pci 0000:00:03.2: enabling bus mastering
[ 0.411935] ehci-pci 0000:00:03.2: EHCI Host Controller
[ 0.412168] ehci-pci 0000:00:03.2: new USB bus registered, assigned bus number 1
[ 0.412459] ehci-pci 0000:00:03.2: irq 10, io mem 0xff6ea000
[ 0.418023] ehci-pci 0000:00:03.2: USB 2.0 started, EHCI 1.00
[ 0.418227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.418365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.418583] usb usb1: Product: EHCI Host Controller
[ 0.418716] usb usb1: Manufacturer: Linux 3.17.0-rc4+ ehci_hcd
[ 0.418852] usb usb1: SerialNumber: 0000:00:03.2
[ 0.419191] hub 1-0:1.0: USB hub found
[ 0.419333] hub 1-0:1.0: 4 ports detected
[ 0.419616] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.419765] ohci-pci: OHCI PCI platform driver
[ 0.419975] __pci_set_master: ohci-pci 0000:00:03.0: enabling bus mastering
[ 0.419981] ohci-pci 0000:00:03.0: OHCI PCI host controller
[ 0.420194] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 0.420436] ohci-pci 0000:00:03.0: irq 10, io mem 0xff6e8000
[ 0.475085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.475224] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.475441] usb usb2: Product: OHCI PCI host controller
[ 0.475576] usb usb2: Manufacturer: Linux 3.17.0-rc4+ ohci_hcd
[ 0.475711] usb usb2: SerialNumber: 0000:00:03.0
[ 0.476021] hub 2-0:1.0: USB hub found
[ 0.476163] hub 2-0:1.0: 2 ports detected
[ 0.476450] __pci_set_master: ohci-pci 0000:00:03.1: enabling bus mastering
[ 0.476456] ohci-pci 0000:00:03.1: OHCI PCI host controller
[ 0.476645] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.476883] ohci-pci 0000:00:03.1: irq 10, io mem 0xff6e9000
[ 0.532112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.532264] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.532504] usb usb3: Product: OHCI PCI host controller
[ 0.532653] usb usb3: Manufacturer: Linux 3.17.0-rc4+ ohci_hcd
[ 0.532802] usb usb3: SerialNumber: 0000:00:03.1
[ 0.543911] hub 3-0:1.0: USB hub found
[ 0.544066] hub 3-0:1.0: 2 ports detected
[ 0.544300] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.544510] usbcore: registered new interface driver usblp
[ 0.544685] usbcore: registered new interface driver usb-storage
[ 0.544874] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.545035] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.546074] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.546345] mousedev: PS/2 mouse device common for all mice
[ 0.546773] rtc_cmos 00:00: RTC can wake from S4
[ 0.547137] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.547312] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[ 0.547648] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.547920] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.548422] usbcore: registered new interface driver usbhid
[ 0.548560] usbhid: USB HID core driver
[ 0.549071] Netfilter messages via NETLINK v0.30.
[ 0.549226] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.549576] ctnetlink v0.93: registering with nfnetlink.
[ 0.549897] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.550155] TCP: cubic registered
[ 0.550291] Initializing XFRM netlink socket
[ 0.550645] NET: Registered protocol family 10
[ 0.551219] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.551481] sit: IPv6 over IPv4 tunneling driver
[ 0.551826] NET: Registered protocol family 17
[ 0.552022] Key type dns_resolver registered
[ 0.552543] registered taskstats version 1
[ 0.553289] Magic number: 14:421:982
[ 0.553528] console [netcon0] enabled
[ 0.553663] netconsole: network logging started
[ 0.553905] PM: Hibernation image not present or could not be loaded.
[ 0.553909] ALSA device list:
[ 0.554063] No soundcards found.
[ 0.569755] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.694597] ata1: SATA link down (SStatus 4 SControl 300)
[ 1.009547] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.314040] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.317439] ata3.00: ATA-8: WDC WD3200AAJS-07M0A0, 01.03E01, max UDMA/133
[ 1.317578] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.323443] ata3.00: configured for UDMA/133
[ 1.323704] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 3E01 PQ: 0 ANSI: 5
[ 1.324209] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.324489] sd 2:0:0:0: [sda] Write Protect is off
[ 1.324624] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.324652] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.324959] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.340706] sda: sda1 sda2 sda3 sda4
[ 1.341334] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.640589] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.791111] md: Waiting for all devices to be available before autodetect
[ 1.791250] md: If you don't use raid, use raid=noautodetect
[ 1.791602] md: Autodetecting RAID arrays.
[ 1.791739] md: Scanned 0 and added 0 devices.
[ 1.791875] md: autorun ...
[ 1.792028] md: ... autorun DONE.
[ 1.801475] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[ 1.801933] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[ 1.818098] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.818336] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 1.843320] devtmpfs: mounted
[ 1.845531] Freeing unused kernel memory: 1076K (ffffffff81ef4000 - ffffffff82001000)
[ 1.845765] Write protecting the kernel read-only data: 14336k
[ 1.853118] Freeing unused kernel memory: 1620K (ffff88000186b000 - ffff880001a00000)
[ 1.858789] Freeing unused kernel memory: 1256K (ffff880001cc6000 - ffff880001e00000)
[ 2.318895] random: nonblocking pool is initialized
[ 2.339345] loadkeys (1016) used greatest stack depth: 13232 bytes left
[ 2.339801] init-early.sh (1014) used greatest stack depth: 12576 bytes left
[ 3.177720] systemd-udevd[1186]: starting version 215
[ 3.506767] tg3 0000:04:04.0 enp4s4f0: renamed from eth0
[ 3.510183] systemd-udevd[1202]: renamed network interface eth0 to enp4s4f0
[ 3.517031] tg3 0000:04:04.1 enp4s4f1: renamed from eth1
[ 3.522106] systemd-udevd[1203]: renamed network interface eth1 to enp4s4f1
[ 4.961476] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.183664] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 5.185169] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 6.198537] tg3 0000:04:04.0: irq 18 for MSI/MSI-X
[ 6.236136] IPv6: ADDRCONF(NETDEV_UP): enp4s4f0: link is not ready
[ 9.434173] tg3 0000:04:04.0 enp4s4f0: Link is up at 1000 Mbps, full duplex
[ 9.434185] tg3 0000:04:04.0 enp4s4f0: Flow control is off for TX and off for RX
[ 9.434208] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s4f0: link becomes ready
next prev parent reply other threads:[~2014-09-12 11:12 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-03 10:57 [BUG] Bisected Problem with LSI PCI FC Adapter Dirk Gouders
2014-09-03 12:28 ` Andreas Noever
2014-09-03 12:47 ` Dirk Gouders
2014-09-03 15:54 ` Andreas Noever
2014-09-04 6:09 ` Dirk Gouders
2014-09-11 13:43 ` Dirk Gouders
2014-09-11 17:30 ` Bjorn Helgaas
2014-09-11 19:26 ` Yinghai Lu
2014-09-11 20:33 ` Dirk Gouders
2014-09-11 20:42 ` Bjorn Helgaas
2014-09-11 21:24 ` Dirk Gouders
2014-09-11 22:51 ` Bjorn Helgaas
2014-09-11 23:50 ` Dirk Gouders
2014-09-12 11:11 ` Dirk Gouders [this message]
2014-09-12 20:05 ` Dirk Gouders
2014-09-12 20:37 ` Andreas Noever
2014-09-12 20:38 ` Bjorn Helgaas
2014-09-12 20:39 ` Yinghai Lu
2014-09-12 20:54 ` Dirk Gouders
2014-09-12 21:49 ` Yinghai Lu
2014-09-12 22:05 ` Dirk Gouders
2014-09-12 23:09 ` Yinghai Lu
2014-09-13 0:11 ` Dirk Gouders
2014-09-13 1:59 ` Yinghai Lu
2014-09-13 4:07 ` Bjorn Helgaas
2014-09-13 9:30 ` Dirk Gouders
2014-09-13 19:41 ` Dirk Gouders
2014-09-14 10:42 ` Andreas Noever
2014-09-14 10:44 ` Andreas Noever
2014-09-14 11:40 ` Dirk Gouders
2014-09-14 13:16 ` Andreas Noever
2014-09-14 14:24 ` Dirk Gouders
2014-09-19 18:39 ` Bjorn Helgaas
2014-09-20 18:41 ` Dirk Gouders
2014-09-22 14:25 ` Bjorn Helgaas
2014-09-22 14:53 ` Andreas Noever
2014-09-22 15:23 ` Bjorn Helgaas
2014-09-19 17:12 ` Bjorn Helgaas
2014-09-19 15:03 ` Dirk Gouders
2014-09-19 18:21 ` Dirk Gouders
2014-09-11 20:35 ` Dirk Gouders
2014-09-11 20:42 ` Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ghzje5f5zt.fsf@lena.gouders.net \
--to=dirk@gouders.net \
--cc=andreas.noever@gmail.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.