All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Kroehnert <christian.kroehnert@avionic-design.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard
Date: Thu, 19 Apr 2012 14:41:22 +0200	[thread overview]
Message-ID: <jmp15j$1q2$1@dough.gmane.org> (raw)
In-Reply-To: <1326588449-1794-1-git-send-email-sjg@chromium.org>

On 15.01.2012 01:47, Simon Glass wrote:
> This series adds support for the Tegra2x's display peripheral. This
> supports the LCD display on Seaboard and we use this to enable console
> output in U-Boot on the LCD.
>
> Configuration is via the device tree. Proposed bindings are included
> in this series.
>
> To improve performance two optimisations are offered:
>
> 1. The LCD frame buffer is cached, with the cache being flushed after
> each call puts(). This dramatically increases performance (around 10x).
> This requires a few additions to the ARM cache support.
>
> 2. The console supports scrolling in steps of more than 1 line. This
> speeds up scrolling output considerably, particularly commands like
> 'printenv' which display a lot of output. This requires a new CONFIG
> and a change to the console_scrollup() function.
>
>
> Mayuresh Kulkarni (1):
>    tegra: Enable display/lcd support on Seaboard
>
> Simon Glass (15):
>    fdt: Add function to look up a phandle's register address
>    fdt: Add header guard to fdtdec.h
>    fdt: Correct GPIO name access in fdtdec
>    tegra: Add display support to funcmux
>    tegra: fdt: Add LCD definitions for Tegra
>    tegra: Add support for PWFM
>    tegra: Add LCD driver
>    tegra: Add LCD support to Nvidia boards
>    arm: Add control over cachability of memory regions
>    lcd: Add CONFIG_ALIGN_LCD_TO_SECTION to align lcd for MMU
>    lcd: Add support for flushing LCD fb from dcache after update
>    tegra: Align LCD frame buffer to section boundary
>    tegra: Support control of cache settings for LCD
>    tegra: fdt: Add LCD definitions for Seaboard
>    lcd: Add CONSOLE_SCROLL_LINES option to speed console
>
> Wei Ni (1):
>    tegra: Add SOC support for display/lcd
>
>   README                                          |   16 +
>   arch/arm/cpu/armv7/cache_v7.c                   |   11 +
>   arch/arm/cpu/armv7/tegra2/Makefile              |    1 +
>   arch/arm/cpu/armv7/tegra2/display.c             |  271 +++++++++++
>   arch/arm/cpu/armv7/tegra2/funcmux.c             |   39 ++
>   arch/arm/cpu/armv7/tegra2/pwfm.c                |   40 ++
>   arch/arm/dts/tegra20.dtsi                       |   25 +
>   arch/arm/include/asm/arch-tegra2/dc.h           |  544 +++++++++++++++++++++++
>   arch/arm/include/asm/arch-tegra2/display.h      |  133 ++++++
>   arch/arm/include/asm/arch-tegra2/pwfm.h         |   54 +++
>   arch/arm/include/asm/system.h                   |   30 ++
>   arch/arm/lib/cache-cp15.c                       |   62 +++-
>   board/nvidia/common/board.c                     |   21 +-
>   board/nvidia/dts/tegra2-seaboard.dts            |   21 +
>   common/cmd_echo.c                               |    3 +-
>   common/lcd.c                                    |   85 +++-
>   doc/device-tree-bindings/video/nvidia-video.txt |   92 ++++
>   drivers/video/Makefile                          |    1 +
>   drivers/video/tegra.c                           |  388 ++++++++++++++++
>   include/configs/seaboard.h                      |   12 +-
>   include/configs/tegra2-common.h                 |    1 +
>   include/fdtdec.h                                |   17 +
>   include/lcd.h                                   |   11 +
>   lib/fdtdec.c                                    |   15 +-
>   24 files changed, 1862 insertions(+), 31 deletions(-)
>   create mode 100644 arch/arm/cpu/armv7/tegra2/display.c
>   create mode 100644 arch/arm/cpu/armv7/tegra2/pwfm.c
>   create mode 100644 arch/arm/include/asm/arch-tegra2/dc.h
>   create mode 100644 arch/arm/include/asm/arch-tegra2/display.h
>   create mode 100644 arch/arm/include/asm/arch-tegra2/pwfm.h
>   create mode 100644 doc/device-tree-bindings/video/nvidia-video.txt
>   create mode 100644 drivers/video/tegra.c
>

Hi Simon,

I have added your patch sources manually into the "Prepare v2012.04-rc1 
release", because I got errors at apply. Also I added a device tree 
source file for Harmony.

I tested the device tree source file for Harmony and your patch sources 
on our Harmony hardware and generated a new patch file:

http://poeggi.dotsec.net/nvidia/uboot-lvds-init-patch/0001-Add-display-driver-and-LCD-support-for-Harmony-board.patch

I hope it's all okay, this my first patch release.

In the display.c source file I implemented a bug fix, because I get 
garbled images on the LCD without this fix.

Greetings
Christian

Changes:

- Add device tree source file for Harmony board
- Add bug fix in display.c
- Patch based on the "Prepare v2012.04-rc1" release

---
  README                                          |    7 +
  arch/arm/cpu/armv7/cache_v7.c                   |   11 +
  arch/arm/cpu/armv7/tegra2/Makefile              |    1 +
  arch/arm/cpu/armv7/tegra2/display.c             |  282 ++++++++++++
  arch/arm/cpu/armv7/tegra2/funcmux.c             |   41 ++
  arch/arm/cpu/armv7/tegra2/pwfm.c                |   45 ++
  arch/arm/dts/tegra20.dtsi                       |   26 ++
  arch/arm/include/asm/arch-tegra2/dc.h           |  544 
+++++++++++++++++++++++
  arch/arm/include/asm/arch-tegra2/display.h      |  133 ++++++
  arch/arm/include/asm/arch-tegra2/pwfm.h         |   54 +++
  arch/arm/include/asm/system.h                   |   30 ++
  arch/arm/lib/cache-cp15.c                       |   61 +++-
  board/nvidia/common/board.c                     |   20 +
  board/nvidia/dts/tegra2-harmony.dts             |   97 ++++
  board/nvidia/dts/tegra2-seaboard.dts            |   21 +
  common/cmd_echo.c                               |    2 +-
  common/lcd.c                                    |   86 +++-
  doc/device-tree-bindings/video/nvidia-video.txt |   92 ++++
  drivers/video/Makefile                          |    1 +
  drivers/video/tegra.c                           |  397 +++++++++++++++++
  dts/Makefile                                    |    2 +-
  include/configs/harmony.h                       |   39 ++-
  include/configs/tegra2-common.h                 |  218 +++++++++-
  include/fdtdec.h                                |   19 +-
  include/lcd.h                                   |   12 +
  lib/fdtdec.c                                    |   12 +
  26 files changed, 2206 insertions(+), 47 deletions(-)
  create mode 100644 arch/arm/cpu/armv7/tegra2/display.c
  create mode 100644 arch/arm/cpu/armv7/tegra2/pwfm.c
  create mode 100644 arch/arm/include/asm/arch-tegra2/dc.h
  create mode 100644 arch/arm/include/asm/arch-tegra2/display.h
  create mode 100644 arch/arm/include/asm/arch-tegra2/pwfm.h
  create mode 100644 board/nvidia/dts/tegra2-harmony.dts
  create mode 100644 doc/device-tree-bindings/video/nvidia-video.txt
  create mode 100644 drivers/video/tegra.c

  parent reply	other threads:[~2012-04-19 12:41 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-15  0:47 [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 04/17] tegra: Add display support to funcmux Simon Glass
2012-01-15  1:36   ` Mike Frysinger
2012-06-13 12:15     ` Simon Glass
     [not found] ` <1326588449-1794-1-git-send-email-sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2012-01-15  0:47   ` [PATCH 01/17] fdt: Add function to look up a phandle's register address Simon Glass
2012-01-15  0:47     ` [U-Boot] " Simon Glass
2012-01-15  0:47   ` [PATCH 02/17] fdt: Add header guard to fdtdec.h Simon Glass
2012-01-15  0:47     ` [U-Boot] " Simon Glass
2012-01-15  0:47   ` [PATCH 03/17] fdt: Correct GPIO name access in fdtdec Simon Glass
2012-01-15  0:47     ` [U-Boot] " Simon Glass
2012-01-15  0:47   ` [PATCH 05/17] tegra: fdt: Add LCD definitions for Tegra Simon Glass
2012-01-15  0:47     ` [U-Boot] " Simon Glass
2012-01-15  0:47   ` [PATCH 15/17] tegra: fdt: Add LCD definitions for Seaboard Simon Glass
2012-01-15  0:47     ` [U-Boot] " Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 06/17] tegra: Add support for PWFM Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 07/17] tegra: Add SOC support for display/lcd Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 08/17] tegra: Add LCD driver Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 09/17] tegra: Add LCD support to Nvidia boards Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 10/17] arm: Add control over cachability of memory regions Simon Glass
2012-02-10 20:38   ` Albert ARIBAUD
2012-03-04  6:20     ` Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 11/17] lcd: Add CONFIG_ALIGN_LCD_TO_SECTION to align lcd for MMU Simon Glass
2012-01-15  1:38   ` Mike Frysinger
2012-06-13 12:23     ` Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update Simon Glass
2012-01-15  1:42   ` Mike Frysinger
2012-01-15  1:57     ` Simon Glass
2012-01-15  2:16       ` Mike Frysinger
2012-06-13 12:25         ` Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 13/17] tegra: Align LCD frame buffer to section boundary Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 14/17] tegra: Support control of cache settings for LCD Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 16/17] lcd: Add CONSOLE_SCROLL_LINES option to speed console Simon Glass
2012-01-15  0:47 ` [U-Boot] [PATCH 17/17] tegra: Enable display/lcd support on Seaboard Simon Glass
2012-04-19 12:41 ` Christian Kroehnert [this message]
2012-07-14  8:03   ` [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard Simon Glass
2012-07-17 16:11     ` Thierry Reding
2012-07-18  6:51       ` Simon Glass
2012-07-19 12:01         ` Christian Kroehnert
2012-07-24 19:16         ` Stephen Warren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='jmp15j$1q2$1@dough.gmane.org' \
    --to=christian.kroehnert@avionic-design.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.