From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757477Ab0DHDvt (ORCPT ); Wed, 7 Apr 2010 23:51:49 -0400 Received: from mail-pz0-f193.google.com ([209.85.222.193]:54942 "EHLO mail-pz0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756914Ab0DHDv2 convert rfc822-to-8bit (ORCPT ); Wed, 7 Apr 2010 23:51:28 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=P/QrIbjgAivuTj4LU/PCvraR8IfpU3bKgzXM2wRgNiaz9GS1W1Ii6o/CjLb7MKLekS 7ezNWJDeHbYDxZvGhNAhgOfvuWqUGGbfLXcx84zWuwMlqWp1tAd8jYIcpJQZNK338kh9 afEY+ewpSCyOkLIuw2Y6/MD4grL92aPixOOJE= MIME-Version: 1.0 In-Reply-To: <4BBD1957.90502@gmail.com> References: <4BBC9CA1.5080102@ladisch.de> <4BBD1957.90502@gmail.com> Date: Wed, 7 Apr 2010 20:51:26 -0700 Message-ID: Subject: Re: Failed to initialize MSI interrupts && ioremap reserve_memtype failed -22 From: Mark Knecht To: Robert Hancock Cc: Clemens Ladisch , Linux Kernel List Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed, Apr 7, 2010 at 4:46 PM, Robert Hancock wrote: > On 04/07/2010 09:57 AM, Mark Knecht wrote: >> >> On Wed, Apr 7, 2010 at 7:54 AM, Clemens Ladisch >>  wrote: >>> >>> Mark Knecht wrote: >>>> >>>>    New hardware and I haven't seen these messages before so I thought >>>> I'd post them. >>> >>> Both might be harmless.  Please show the entire boot log. >>> >>> >>> Regards, >>> Clemens >>> >> >> Hopefully you mean the contents of dmesg. If it's something else let me >> know. >> >> If the mail server deletes the text file attachment I'll reply again >> pasting the text in by hand. > > Looks like the start of the log was truncated. Can you check if your distro > writes the bootup kernel output somewhere (like /var/log/dmesg)? > Sorry about that. Apparently the default kernel log buffer wasn;t big enough anymore. It's a new machine and the first time I've run into that. Hopefully this is everything this time. Thanks! - MArk mark@k2 ~ $ dmesg Linux version 2.6.33-gentoo (root@k2) (gcc version 4.3.4 (Gentoo 4.3.4 p1.1, pie-10.1.5) ) #2 SMP PREEMPT Wed Apr 7 19:20:31 PDT 2010 Command line: root=/dev/md3 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 0000000000090000 (reserved) BIOS-e820: 0000000000090000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cf4bd000 (usable) BIOS-e820: 00000000cf4bd000 - 00000000cf4bf000 (reserved) BIOS-e820: 00000000cf4bf000 - 00000000cf4c4000 (usable) BIOS-e820: 00000000cf4c4000 - 00000000cf7bf000 (ACPI NVS) BIOS-e820: 00000000cf7bf000 - 00000000cf7df000 (usable) BIOS-e820: 00000000cf7df000 - 00000000cf7ff000 (ACPI data) BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable) BIOS-e820: 00000000cf800000 - 00000000d0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fd000000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000001b0000000 (usable) NX (Execute Disable) protection: active DMI 2.5 present. No AGP bridge found last_pfn = 0x1b0000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FF0000000 write-back 3 base 100000000 mask F80000000 write-back 4 base 180000000 mask FE0000000 write-back 5 base 1A0000000 mask FF0000000 write-back 6 base 0FFFF0000 mask FFFFF0000 write-protect 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xcf800 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cf800000 0000000000 - 00cf800000 page 2M kernel direct mapping tables up to cf800000 @ 8000-d000 init_memory_mapping: 0000000100000000-00000001b0000000 0100000000 - 01b0000000 page 2M kernel direct mapping tables up to 1b0000000 @ b000-13000 ACPI: RSDP 00000000000fe020 00024 (v02 INTEL ) ACPI: XSDT 00000000cf7fe120 00074 (v01 INTEL DX58SO 00001135 01000013) ACPI: FACP 00000000cf7fd000 000F4 (v03 INTEL DX58SO 00001135 MSFT 0100000D) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000450/0 (20091214/tbfadt-557) ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20091214/tbfadt-607) ACPI: DSDT 00000000cf7f8000 04641 (v02 INTEL DX58SO 00001135 MSFT 0100000D) ACPI: FACS 00000000cf728000 00040 ACPI: APIC 00000000cf7f7000 00138 (v02 INTEL DX58SO 00001135 MSFT 0100000D) ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL DX58SO 00001135 MSFT 0100000D) ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL DX58SO 00001135 MSFT 0100000D) ACPI: ASF! 00000000cf7f4000 000AC (v32 INTEL DX58SO 00001135 MSFT 0100000D) ACPI: HPET 00000000cf7f3000 00038 (v01 INTEL DX58SO 00001135 MSFT 0100000D) ACPI: SSDT 00000000cf7e2000 0E134 (v01 INTEL SSDT PM 00001135 MSFT 0100000D) ACPI: DMAR 00000000cf7df000 00140 (v01 INTEL DX58SO 00001135 MSFT 0100000D) ACPI: WDTT 00000000cf7f1000 0020C (v02 INTEL DX58SO 00001135 MSFT 0100000D) ACPI: ASPT 00000000cf7f2000 00034 (v04 INTEL PerfTune 00001135 MSFT 0100000D) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 01b0000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0001737e74] TEXT DATA BSS ==> [0001000000 - 0001737e74] #2 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000] #3 [0001738000 - 000173815e] BRK ==> [0001738000 - 000173815e] #4 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #6 [000000b000 - 000000e000] PGTABLE ==> [000000b000 - 000000e000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff880028600000-ffff88002dbfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x001b0000 Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000000 -> 0x0000008f 0: 0x00000090 -> 0x0000009d 0: 0x00000100 -> 0x000cf4bd 0: 0x000cf4bf -> 0x000cf4c4 0: 0x000cf7bf -> 0x000cf7df 0: 0x000cf7ff -> 0x000cf800 0: 0x00100000 -> 0x001b0000 On node 0 totalpages: 1569919 DMA zone: 56 pages used for memmap DMA zone: 108 pages reserved DMA zone: 3832 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 830747 pages, LIFO batch:31 Normal zone: 9856 pages used for memmap Normal zone: 711040 pages, LIFO batch:31 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 16 Processors exceeds NR_CPUS limit of 8 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at d0000000 (gap: d0000000:28000000) setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880028200000 s73304 r8192 d20904 u262144 pcpu-alloc: s73304 r8192 d20904 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1545619 Kernel command line: root=/dev/md3 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... No AGP bridge found Memory: 6103968k/7077888k available (3345k kernel code, 798212k absent, 174800k reserved, 3225k data, 440k init) Experimental preemptable hierarchical RCU implementation. NR_IRQS:512 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2666.181 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.36 BogoMIPS (lpj=2666181) Security Framework initialized Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8 using mwait in idle threads. Performance Events: Nehalem/Corei7 events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f Freeing SMP alternatives: 33k freed ACPI: Core revision 20091214 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 Booting Node 0, Processors #1 CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 #2 CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 #3 CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 #4 CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 #5 CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 #6 CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 #7 Ok. CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 Brought up 8 CPUs Total of 8 processors activated (42659.97 BogoMIPS). NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered dca service started, version 1.12.1 PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000cbfff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfedfffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xf7ffffff] (ignored) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:19.0: reg 10: [mem 0xd3200000-0xd321ffff] pci 0000:00:19.0: reg 14: [mem 0xd3223000-0xd3223fff] pci 0000:00:19.0: reg 18: [io 0x3100-0x311f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0x30e0-0x30ff] pci 0000:00:1a.1: reg 20: [io 0x30c0-0x30df] pci 0000:00:1a.2: reg 20: [io 0x30a0-0x30bf] pci 0000:00:1a.7: reg 10: [mem 0xd3222000-0xd32223ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xf0000000-0xf0003fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] pci 0000:00:1d.7: reg 10: [mem 0xd3221000-0xd32213ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f) pci 0000:00:1f.2: reg 10: [io 0x3128-0x312f] pci 0000:00:1f.2: reg 14: [io 0x3134-0x3137] pci 0000:00:1f.2: reg 18: [io 0x3120-0x3127] pci 0000:00:1f.2: reg 1c: [io 0x3130-0x3133] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f] pci 0000:00:1f.2: reg 24: [mem 0xd3220000-0xd32207ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xf0004000-0xf00040ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit] pci 0000:02:00.0: reg 24: [io 0x2000-0x207f] pci 0000:02:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xd2ffffff] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:07.0: PCI bridge to [bus 03-03] pci 0000:00:1c.0: PCI bridge to [bus 04-04] pci 0000:00:1c.1: PCI bridge to [bus 05-05] pci 0000:06:00.0: reg 10: [io 0x1018-0x101f] pci 0000:06:00.0: reg 14: [io 0x1024-0x1027] pci 0000:06:00.0: reg 18: [io 0x1010-0x1017] pci 0000:06:00.0: reg 1c: [io 0x1020-0x1023] pci 0000:06:00.0: reg 20: [io 0x1000-0x100f] pci 0000:06:00.0: reg 24: [mem 0xd3100000-0xd31003ff] pci 0000:06:00.0: supports D1 pci 0000:06:00.0: PME# supported from D0 D1 D3hot pci 0000:06:00.0: PME# disabled pci 0000:00:1c.4: PCI bridge to [bus 06-06] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.4: bridge window [mem 0xd3100000-0xd31fffff] pci 0000:07:03.0: reg 10: [mem 0xd3004000-0xd30047ff] pci 0000:07:03.0: reg 14: [mem 0xd3000000-0xd3003fff] pci 0000:07:03.0: supports D1 D2 pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:07:03.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd3000000-0xd30fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:05: [io 0x0500-0x053f] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0680-0x06ff] has been reserved pci 0000:02:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem disabled] pci 0000:00:01.0: bridge window [mem pref disabled] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x80000) pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xd2ffffff] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:07.0: PCI bridge to [bus 03-03] pci 0000:00:07.0: bridge window [io disabled] pci 0000:00:07.0: bridge window [mem disabled] pci 0000:00:07.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI bridge to [bus 04-04] pci 0000:00:1c.0: bridge window [io disabled] pci 0000:00:1c.0: bridge window [mem disabled] pci 0000:00:1c.0: bridge window [mem pref disabled] pci 0000:00:1c.1: PCI bridge to [bus 05-05] pci 0000:00:1c.1: bridge window [io disabled] pci 0000:00:1c.1: bridge window [mem disabled] pci 0000:00:1c.1: bridge window [mem pref disabled] pci 0000:00:1c.4: PCI bridge to [bus 06-06] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.4: bridge window [mem 0xd3100000-0xd31fffff] pci 0000:00:1c.4: bridge window [mem pref disabled] pci 0000:00:1e.0: PCI bridge to [bus 07-07] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem 0xd3000000-0xd30fffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd2ffffff] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] pci_bus 0000:06: resource 1 [mem 0xd3100000-0xd31fffff] pci_bus 0000:07: resource 1 [mem 0xd3000000-0xd30fffff] pci_bus 0000:07: resource 3 [io 0x0000-0xffff] pci_bus 0000:07: resource 4 [mem 0x00000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:02:00.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher NTFS driver 2.1.29 [Flags: R/W]. msgmni has been set to 11923 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:03.0: setting latency timer to 64 pcieport 0000:00:07.0: setting latency timer to 64 pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.4: setting latency timer to 64 input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... ide0: no devices on the port ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1: no devices on the port ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 ide-cd driver 5.00 Loading iSCSI transport class v2.0-870. SCSI Media Changer driver v0.25 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata4: SATA max UDMA/133 abar m2048@0xd3220000 port 0xd3220280 irq 19 ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata6: SATA max UDMA/133 abar m2048@0xd3220000 port 0xd3220380 irq 19 ahci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:06:00.0: controller can't do NCQ, turning off CAP_NCQ ahci 0000:06:00.0: controller can't do PMP, turning off CAP_PMP ahci 0000:06:00.0: MV_AHCI HACK: port_map 7 -> 3 ahci 0000:06:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this. ahci: SSS flag set, parallel bus scan disabled ahci 0000:06:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode ahci 0000:06:00.0: flags: 64bit stag led slum part ahci 0000:06:00.0: setting latency timer to 64 scsi6 : ahci scsi7 : ahci scsi8 : ahci ata7: SATA max UDMA/133 abar m1024@0xd3100000 port 0xd3100100 irq 16 ata8: SATA max UDMA/133 abar m1024@0xd3100000 port 0xd3100180 irq 16 ata9: DUMMY PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu ioatdma: Intel(R) QuickData Technology Driver 4.00 TCP cubic registered NET: Registered protocol family 17 ata6: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133 ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133 ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata3.00: configured for UDMA/133 ata2.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100, ATAPI AN ata5.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata2.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5 sda1 sda2 sda3 sda4 sdc1 sdc2 sdc3 sd 4:0:0:0: [sdc] Attached SCSI disk sd 0:0:0:0: [sda] Attached SCSI disk sdb1 sdb2 sdb3 sd 2:0:0:0: [sdb] Attached SCSI disk ata8: SATA link down (SStatus 0 SControl 300) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 2 and added 2 devices. md: autorun ... md: considering sdb3 ... md: adding sdb3 ... md: adding sdc3 ... md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md3: detected capacity change from 0 to 42960551936 md: ... autorun DONE. md3: unknown partition table kjournald starting. Commit interval 5 seconds EXT3-fs (md3): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 9:3. Freeing unused kernel memory: 440k freed Write protecting the kernel read-only data: 6144k Freeing unused kernel memory: 732k freed Freeing unused kernel memory: 780k freed udev: starting version 149 Monitor-Mwait will be used to enter C-1 state rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 0000:00:19.0: 0000:00:19.0: Failed to initialize MSI interrupts. Falling back to legacy interrupts. Linux agpgart interface v0.103 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 4:0:0:0: Attached scsi generic sg3 type 0 firewire_ohci 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb uhci_hcd: USB Universal Host Controller Interface driver firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:b1:9a:fd 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030e0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33-gentoo uhci_hcd usb usb1: SerialNumber: 0000:00:1a.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd3222000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33-gentoo ehci_hcd usb usb2: SerialNumber: 0000:00:1a.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030c0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.33-gentoo uhci_hcd usb usb3: SerialNumber: 0000:00:1a.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd3221000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: EHCI Host Controller usb usb4: Manufacturer: Linux 2.6.33-gentoo ehci_hcd usb usb4: SerialNumber: 0000:00:1d.7 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x000030a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.33-gentoo uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.33-gentoo uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.33-gentoo uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.33-gentoo uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint firewire_core: created device fw0: GUID 00902700025d5a61, S400 usb 5-2: new low speed USB device using uhci_hcd and address 2 nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:02:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010 usb 5-2: New USB device found, idVendor=045e, idProduct=0084 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: Basic Optical Mouse usb 5-2: Manufacturer: Microsoft usbcore: registered new interface driver hiddev input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2 generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.2-2/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 8-2: new low speed USB device using uhci_hcd and address 2 EXT3-fs (md3): using internal journal usb 8-2: New USB device found, idVendor=047b, idProduct=0011 usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 8-2: Product: Standard USB Keyboard usb 8-2: Manufacturer: Silitek input: Silitek Standard USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3 generic-usb 0003:047B:0011.0002: input,hidraw1: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:1d.2-2/input0 Adding 4200988k swap on /dev/sda2. Priority:-1 extents:1 across:4200988k Adding 4200988k swap on /dev/sdb2. Priority:-2 extents:1 across:4200988k Adding 4200988k swap on /dev/sdc2. Priority:-3 extents:1 across:4200988k e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO NET: Registered protocol family 10 ioremap reserve_memtype failed -22 eth0: no IPv6 routers present mark@k2 ~ $