From mboxrd@z Thu Jan  1 00:00:00 1970
From: Adarsh Babu <adarshrbpin@yahoo.co.in>
Date: Thu, 1 Mar 2007 06:12:17 +0000 (UTC)
Subject: [U-Boot-Users] Uncompression of image takes time.
References: <loom.20070228T172807-968@post.gmane.org>
	<45E5B6EB.8090901@smiths-aerospace.com>
Message-ID: <loom.20070301T070547-407@post.gmane.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Jerry Van Baren <gerald.vanbaren <at> smiths-aerospace.com> writes:

> 
> Adarsh Babu wrote:
> > Hi,
> > 
> > I have an image which is 1.5MB in size after compression, thats is done 
for 
> > MCF5271. When i try to load this on a MCF5271 eval board using u-boot 
1.2.0 it 
> > takes about 25 secs to just uncompress. I loaded a MCF5272 eval board with 
U-
> > Boot 1.2.0 and then tried to start the same image(which was done for 
MCF5271). 
> > It was very fast. The checksum verification finish off in a second and 
> > uncompression in 10 seconds ! 
> > 
> > The clock configurations for both are provided below:
> > M5272C3.h
> > define CFG_HZ			1000
> > #define CFG_CLK			66000000
> > 
> > M5271EVB.h:
> > define CFG_HZ			1000000
> > #define CFG_CLK			100000000
> > 
> > What should I do to get the image to uncompress faster in the MCF5271 EVB?
> > 
> > Regards,
> > Adarsh.
> 
> 1) Your CFG_HZ looks like a problem: it should be 1000 and your timer 
> tick interrupt should be running 1000 times per second to match.  If you 
> are indeed ticking 1,000,000 times per second, you are spending all of 
> your processor time in your timer ISR.
> 
> 2) Why is your image 1.5MB?  I suspect you have large unused areas of 
> memory (typically due to ISR vectors, followed by a huge unused gap, 
> followed by the code).  If you fix your image size (assuming it is 
> broken), the checksum and uncompress will be much faster.
> 
> gvb
> 

Hi Jerry,

I tried the same after modifying the CFG_HZ to 1000. But i still get the same 
result. Its as if there is no effect. The image size is 1.5MB becos its just 
not a kernel image. Its kernel + our application. Could this be a problem with 
the timer initialization and cofiguration?

Regards,
Adarsh.