All of lore.kernel.org
 help / color / mirror / Atom feed
From: pille <pille+kvm-devel@struction.de>
To: kvm@vger.kernel.org
Subject: Re: xen-in-kvm doesn't work with kvm-81.
Date: Fri, 5 Mar 2010 19:46:17 +0000 (UTC)	[thread overview]
Message-ID: <loom.20100305T203703-147@post.gmane.org> (raw)
In-Reply-To: 4960B739.4050605@redhat.com

> It seems to work with -no-kvm-pit-reinjection.

here -no-kvm-pit helped to solve the problem above.
however - when it boots the dom0 (debian lenny standard), it reboots at a
certain point. any ideas?

cheers
  pille

the serial console output follows:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-2-xen-686 (Debian 2.6.26-21lenny3)
 (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25))
 #1 SMP Wed Feb 10 11:28:19 UTC 2010
[    0.000000] Reserving virtual address space above 0xf5800000
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000f5af0000 (usable)
[    0.000000] 3202MB HIGHMEM available.
[    0.000000] 728MB LOWMEM available.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   186368
[    0.000000]   HighMem    186368 ->  1006320
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->  1006320
[    0.000000] found SMP MP-table at [f5651c90] 000fbc90
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP 000FBDE0, 0014 (r0 QEMU  )
[    0.000000] ACPI: RSDT DFFF0000, 0034 (r1 QEMU   QEMURSDT        1 
QEMU        1)
[    0.000000] ACPI: FACP DFFF01B4, 0074 (r1 QEMU   QEMUFACP        1 
QEMU        1)
[    0.000000] ACPI: DSDT DFFF0280, 1DD4 (r1   BXPC   BXDSDT        1 INTL 
20061109)
[    0.000000] ACPI: FACS DFFF0240, 0040
[    0.000000] ACPI: SSDT DFFF2054, 09E3 (r1   BXPC   BXSSDT        1 INTL 
20061109)
[    0.000000] ACPI: APIC DFFF2A38, 00EA (r1 QEMU   QEMUAPIC        1 
QEMU        1)
[    0.000000] ACPI: HPET DFFF2B90, 0038 (r1 QEMU   QEMUHPET        1 
QEMU        1)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at e2000000 (gap:
 e0000000:1ffbc000)
[    0.000000] PERCPU: Allocating 28552 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
 pages: 998458
[    0.000000] Kernel command line: root=/dev/vda1 ro console=ttyS0,115200
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Xen reported: 2666.772 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [ttyS0] enabled
[    0.004000] console [hvc-1] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Software IO TLB enabled: 
[    0.004000]  Aperture:     64 megabytes
[    0.004000]  Kernel range: c3ae2000 - c7ae2000
[    0.004000]  Address size: 27 bits
[    0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.004000] Memory: 3893076k/4025280k available (1845k kernel code, 123188k
 reserved, 740k data, 196k init, 3279808k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xf5555000 - 0xf57ff000   (2728 kB)
[    0.004000]     pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
[    0.004000]     vmalloc : 0xee000000 - 0xf4ffe000   ( 111 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xed800000   ( 728 MB)
[    0.004000]       .init : 0xc038f000 - 0xc03c0000   ( 196 kB)
[    0.004000]       .data : 0xc02cd663 - 0xc03868a0   ( 740 kB)
[    0.004000]       .text : 0xc0100000 - 0xc02cd663   (1845 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor
 mode...Ok.



  reply	other threads:[~2010-03-05 19:50 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-17  6:16 xen-in-kvm doesn't work with kvm-81 Yiyi Hu
2008-12-17 12:07 ` Avi Kivity
2008-12-17 16:35   ` Yiyi Hu
2008-12-17 16:43   ` Yiyi Hu
2009-01-01 12:39 ` Avi Kivity
2009-01-04 13:18   ` Avi Kivity
2010-03-05 19:46     ` pille [this message]
2010-03-05 19:54       ` Alexander Graf
2010-03-05 20:06         ` pille
2010-03-05 20:08           ` Alexander Graf
2010-03-07  8:42           ` Avi Kivity

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=loom.20100305T203703-147@post.gmane.org \
    --to=pille+kvm-devel@struction.de \
    --cc=kvm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.