From: vishnu <vishnu.kopparapu@gmail.com>
To: linux-wireless@vger.kernel.org
Subject: Re: problem connecting to AP on new kernel (disassociating continuously after associating ) . Can some one please comment on the issue I am facing
Date: Tue, 19 Mar 2013 15:40:42 +0000 (UTC) [thread overview]
Message-ID: <loom.20130319T163402-330@post.gmane.org> (raw)
In-Reply-To: 51475D23.70108@lwfinger.net
Larry Finger <Larry.Finger@...> writes:
>
> On 03/18/2013 01:20 PM, vishnu wrote:
> >
> > Hello Jussi,
> >
> > I have applied the patch to kernel 3.7.8 and it doesn't fix my issue. I have
> > started testing the latest 3.9.0-rc2 version. I will let you know once I
have
> > tested.
>
> Please be aware that the patch is not in 3.9-rc2 from Linus's git tree (yet),
> but it is in the wireless-testing git repo.
>
> Larry
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@...
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
Hello Larry,
I have tried with 3.9-rc2 wireless-testing kernel and it is working fine . But
it is taking around 10 to 15 minutes , until which it is continuously
disassociating after association. Is this behaviour expected? Please find the
log if it is useful (Please discard the dates). This continuous for about 10 to
15 minutes and finally it doesn't disassociate with the AP.
Feb 25 05:20:06 buildroot kern.info kernel: wlan0: RX AssocResp from
00:17:3f:15:8f:55 (capab=0x411 status=0 aid=3)^M
wlan0: associated^M
Feb 25 05:20:06 buildroot kern.info kernel: wlan0: associated^M
wlan0: deauthenticating from 00:17:3f:15:8f:55 by local choice (reason=3)^M
Feb 25 05:20:16 buildroot kern.info kernel: wlan0: deauthenticating from
00:17:3f:15:8f:55 by local choice (reason=3)^M
cfg80211: Calling CRDA to update world regulatory domain^M
Feb 25 05:20:16 buildroot kern.debug kernel: cfg80211: All devices are
disconnected, going to restore regulatory settings^M
Feb 25 05:20:16 buildroot kern.debug kernel: cfg80211: Restoring regulatory
settings^M
Feb 25 05:20:16 buildroot kern.debug kernel: cfg80211: Kicking the queue^M
Feb 25 05:20:16 buildroot kern.info kernel: cfg80211: Calling CRDA to update
world regulatory domain^M
wlan0: authenticate with 00:17:3f:15:8f:55^M
Feb 25 05:21:18 buildroot kern.info kernel: wlan0: authenticate with
00:17:3f:15:8f:55^M
wlan0: send auth to 00:17:3f:15:8f:55 (try 1/3)^M
Feb 25 05:21:18 buildroot kern.info kerwlan0: authenticated^M
nel: wlan0: send auth to 00:17:3f:15:8f:55 (try 1/3)^M
Feb 25 05:21:18 buildroot kern.info kernel: wlan0: authenticated^M
rtl8192cu 1-1:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use^M
rtl8192cu 1-1:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP^M
Feb 25 05:21:18 buildroot kern.info kernel: rtl8192cu 1-1:1.0 wlan0: disabling
HT/VHT due to WEP/TKIP use^M
rtl8192cu 1-1:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP^M
Feb 25 05:21:18 buildroot kern.info kernel: rtl8192cu 1-1:1.0 wlan0: disabling
HT as WMM/QoS is not supported by the AP^M
wlan0: associate with 00:17:3f:15:8f:55 (try 1/3)^M
Feb 25 05:21:18 buildroot kern.info kernel: wlan0: associate with
00:17:3f:15:8f:55 (try 1/3)^M
wlan0: RX AssocResp from 00:17:3f:15:8f:55 (capab=0x411 status=0 aid=3)^M
Feb 25 05:21:18 buildroot kern.info kernel: wlan0: RX AssocResp from
00:17:3f:15:8f:55 (capab=0x411 status=0 aidwlan0: associated^M
=3)^M
Feb 25 05:21:18 buildroot kern.info kernel: wlan0: associated^M
wlan0: deauthenticating from 00:17:3f:15:8f:55 by local choice (reason=3)^M
Feb 25 05:21:28 buildroot kern.info kernel: wlan0: deauthenticating from
00:17:3f:15:8f:55 by local choice (reason=3)^M
cfg80211: Calling CRDA to update world regulatory domain^M
Feb 25 05:21:28 buildroot kern.debug kernel: cfg80211: All devices are
disconnected, going to restore regulatory settings^M
Feb 25 05:21:28 buildroot kern.debug kernel: cfg80211: Restoring regulatory
settings^M
Feb 25 05:21:28 buildroot kern.debug kernel: cfg80211: Kicking the queue^M
Feb 25 05:21:28 buildroot kern.info kernel: cfg80211: Calling CRDA to update
world regulatory domain^M
wlan0: authenticate with 00:17:3f:15:8f:55^M
Feb 25 05:22:30 buildroot kern.info kernel: wlan0: authenticate with
00:17:3f:15:8f:55^M
wlan0: send auth to 00:17:3f:15:8f:55 (try 1/3)^M
Feb 25 05:22:30 buildroot kern.info kernel: wlan0: send auth to
00:17:3f:15:8f:55 (trwlan0: authenticated^M
y 1/3)^M
Feb 25 05:22:30 buildroot kern.info kernel:rtl8192cu 1-1:1.0 wlan0: disabling
HT/VHT due to WEP/TKIP use^M
wlan0: authenticated^M
Feb 25 05:22:31 buildroot kern.info kernel: rtl8192cu 1-1:1.0 wlan0: disabling
HT/VHT due to WEP/TKIP use^M
rtl8192cu 1-1:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP^M
Feb 25 05:22:31 buildroot kern.info kernel: rtl8192cu 1-1:1.0 wlan0rtl8192cu 1-
1:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP^M
: disabling HT as WMM/QoS is not supported by the AP^M
Feb 25 05wlan0: associate with 00:17:3f:15:8f:55 (try 1/3)^M
:22:31 buildroot kern.info kernwlan0: RX AssocResp from 00:17:3f:15:8f:55
(capab=0x411 status=0 aid=3)^M
el: rtl8192cu 1-1:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the
AP^M
Feb 25 05:22:31 buildroot kern.info kernel: wlan0: associate with 00:1wlan0:
associated^M
Regards,
Vishnu.
next prev parent reply other threads:[~2013-03-19 15:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-15 13:29 problem connecting to AP on new kernel (disassociating continuously after associating ) . Can some one please comment on the issue I am facing vishnu
2013-03-16 16:44 ` Jussi Kivilinna
2013-03-18 18:20 ` vishnu
2013-03-18 18:29 ` Larry Finger
2013-03-18 18:44 ` vishnu
2013-03-19 15:40 ` vishnu [this message]
2013-03-19 18:14 ` Larry Finger
2013-03-20 12:56 ` vishnu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20130319T163402-330@post.gmane.org \
--to=vishnu.kopparapu@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.