* [PATCH] mmc: sdhci-s3c: Fix mmc card I/O problem
@ 2011-08-26 9:28 ` Girish K S
0 siblings, 0 replies; 6+ messages in thread
From: Girish K S @ 2011-08-26 9:28 UTC (permalink / raw)
To: linux-mmc
Cc: linux-arm-kernel, cjb, ben-linux, kgene.kim, patches,
linux-samsung-soc, Girish K S
This patch fixes the problem in sdhci-s3c host driver for
Samsung Soc's. During the card identification stage the
mmc core driver enumerates for the best bus width in combination
with the highest available data rate. It starts enumerating from
the highest bus width (8) to lowest bus width (1).
In case of few MMC cards the 4-bit bus enumeration fails and tries
the 1-bit bus enumeration. When switched to 1-bit bus mode the host driver
has to clear the previous bus width setting and apply the new setting.
The current patch will clear the previous bus mode and apply the new
mode setting.
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
---
drivers/mmc/host/sdhci-s3c.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 2bd7bf4..fe886d6 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -302,6 +302,8 @@ static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
ctrl &= ~SDHCI_CTRL_8BITBUS;
break;
default:
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
break;
}
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] mmc: sdhci-s3c: Fix mmc card I/O problem
@ 2011-08-26 9:28 ` Girish K S
0 siblings, 0 replies; 6+ messages in thread
From: Girish K S @ 2011-08-26 9:28 UTC (permalink / raw)
To: linux-arm-kernel
This patch fixes the problem in sdhci-s3c host driver for
Samsung Soc's. During the card identification stage the
mmc core driver enumerates for the best bus width in combination
with the highest available data rate. It starts enumerating from
the highest bus width (8) to lowest bus width (1).
In case of few MMC cards the 4-bit bus enumeration fails and tries
the 1-bit bus enumeration. When switched to 1-bit bus mode the host driver
has to clear the previous bus width setting and apply the new setting.
The current patch will clear the previous bus mode and apply the new
mode setting.
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
---
drivers/mmc/host/sdhci-s3c.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 2bd7bf4..fe886d6 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -302,6 +302,8 @@ static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
ctrl &= ~SDHCI_CTRL_8BITBUS;
break;
default:
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
break;
}
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] mmc: sdhci-s3c: Fix mmc card I/O problem
2011-08-26 9:28 ` Girish K S
@ 2011-08-26 10:46 ` Jaehoon Chung
-1 siblings, 0 replies; 6+ messages in thread
From: Jaehoon Chung @ 2011-08-26 10:46 UTC (permalink / raw)
To: Girish K S
Cc: linux-mmc, linux-arm-kernel, cjb, ben-linux, kgene.kim, patches,
linux-samsung-soc
This patch looks fine to me.
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Girish K S wrote:
> This patch fixes the problem in sdhci-s3c host driver for
> Samsung Soc's. During the card identification stage the
> mmc core driver enumerates for the best bus width in combination
> with the highest available data rate. It starts enumerating from
> the highest bus width (8) to lowest bus width (1).
>
> In case of few MMC cards the 4-bit bus enumeration fails and tries
> the 1-bit bus enumeration. When switched to 1-bit bus mode the host driver
> has to clear the previous bus width setting and apply the new setting.
>
> The current patch will clear the previous bus mode and apply the new
> mode setting.
>
> Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
> ---
> drivers/mmc/host/sdhci-s3c.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index 2bd7bf4..fe886d6 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -302,6 +302,8 @@ static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
> ctrl &= ~SDHCI_CTRL_8BITBUS;
> break;
> default:
> + ctrl &= ~SDHCI_CTRL_4BITBUS;
> + ctrl &= ~SDHCI_CTRL_8BITBUS;
> break;
> }
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] mmc: sdhci-s3c: Fix mmc card I/O problem
@ 2011-08-26 10:46 ` Jaehoon Chung
0 siblings, 0 replies; 6+ messages in thread
From: Jaehoon Chung @ 2011-08-26 10:46 UTC (permalink / raw)
To: linux-arm-kernel
This patch looks fine to me.
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Girish K S wrote:
> This patch fixes the problem in sdhci-s3c host driver for
> Samsung Soc's. During the card identification stage the
> mmc core driver enumerates for the best bus width in combination
> with the highest available data rate. It starts enumerating from
> the highest bus width (8) to lowest bus width (1).
>
> In case of few MMC cards the 4-bit bus enumeration fails and tries
> the 1-bit bus enumeration. When switched to 1-bit bus mode the host driver
> has to clear the previous bus width setting and apply the new setting.
>
> The current patch will clear the previous bus mode and apply the new
> mode setting.
>
> Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
> ---
> drivers/mmc/host/sdhci-s3c.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index 2bd7bf4..fe886d6 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -302,6 +302,8 @@ static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
> ctrl &= ~SDHCI_CTRL_8BITBUS;
> break;
> default:
> + ctrl &= ~SDHCI_CTRL_4BITBUS;
> + ctrl &= ~SDHCI_CTRL_8BITBUS;
> break;
> }
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] mmc: sdhci-s3c: Fix mmc card I/O problem
2011-08-26 9:28 ` Girish K S
@ 2011-08-28 18:11 ` Chris Ball
-1 siblings, 0 replies; 6+ messages in thread
From: Chris Ball @ 2011-08-28 18:11 UTC (permalink / raw)
To: Girish K S
Cc: linux-mmc, linux-arm-kernel, ben-linux, kgene.kim, patches,
linux-samsung-soc
Hi,
On Fri, Aug 26 2011, Girish K S wrote:
> This patch fixes the problem in sdhci-s3c host driver for
> Samsung Soc's. During the card identification stage the
> mmc core driver enumerates for the best bus width in combination
> with the highest available data rate. It starts enumerating from
> the highest bus width (8) to lowest bus width (1).
>
> In case of few MMC cards the 4-bit bus enumeration fails and tries
> the 1-bit bus enumeration. When switched to 1-bit bus mode the host driver
> has to clear the previous bus width setting and apply the new setting.
>
> The current patch will clear the previous bus mode and apply the new
> mode setting.
>
> Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Thanks, pushed to mmc-next for 3.1 with a stable@ tag.
- Chris.
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] mmc: sdhci-s3c: Fix mmc card I/O problem
@ 2011-08-28 18:11 ` Chris Ball
0 siblings, 0 replies; 6+ messages in thread
From: Chris Ball @ 2011-08-28 18:11 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Fri, Aug 26 2011, Girish K S wrote:
> This patch fixes the problem in sdhci-s3c host driver for
> Samsung Soc's. During the card identification stage the
> mmc core driver enumerates for the best bus width in combination
> with the highest available data rate. It starts enumerating from
> the highest bus width (8) to lowest bus width (1).
>
> In case of few MMC cards the 4-bit bus enumeration fails and tries
> the 1-bit bus enumeration. When switched to 1-bit bus mode the host driver
> has to clear the previous bus width setting and apply the new setting.
>
> The current patch will clear the previous bus mode and apply the new
> mode setting.
>
> Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Thanks, pushed to mmc-next for 3.1 with a stable@ tag.
- Chris.
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-08-28 18:11 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-26 9:28 [PATCH] mmc: sdhci-s3c: Fix mmc card I/O problem Girish K S
2011-08-26 9:28 ` Girish K S
2011-08-26 10:46 ` Jaehoon Chung
2011-08-26 10:46 ` Jaehoon Chung
2011-08-28 18:11 ` Chris Ball
2011-08-28 18:11 ` Chris Ball
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.