From mboxrd@z Thu Jan 1 00:00:00 1970 From: Detlev Zundel Date: Mon, 09 Jul 2012 16:31:57 +0200 Subject: [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration In-Reply-To: (Prafulla Wadaskar's message of "Wed, 4 Jul 2012 02:20:50 -0700") References: <1339063620-8890-1-git-send-email-valentin.longchamp@keymile.com> <1339063620-8890-13-git-send-email-valentin.longchamp@keymile.com> <4FE31D14.6080005@keymile.com> <4FF2C089.4000302@keymile.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Prafulla, [...] > Hi Detlev > Clear NAK for this patch Do you mean clear NAK for "the patch" or "for the location of the files"? > Let's put it in drivers/net/phy/ > FYI: there are several drivers used by just one board, > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ vim > drivers/net/phy/Makefile > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ grep -Irn > "CONFIG_PHY_ATHEROS" include/configs/* > include/configs/microblaze-generic.h:346:# define CONFIG_PHY_ATHEROS 1 > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ vim > drivers/net/phy/Makefile > [prafulla at pe-dt061 u-boot-marvell.git (master)]$ grep -Irn > "CONFIG_PHY_BROADCOM" include/configs/* > include/configs/microblaze-generic.h:347:# define CONFIG_PHY_BROADCOM 1 > > Anyways peripheral driver should go in drivers/ Ok, so if the files are moved to drivers/net/phy, then you will ACK the patch? If this is the case, then Valentin please move the files and be done with it. Cheers Detlev -- ... that every year or so they're going to give you a new release full of 50 000 additional lines of code all written by monkeys. Because they generally follow the ``million monkeys typing, and eventually they'll come up with something useful'' school of system development. -- Richard M. Stallman -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de