From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Armbruster Subject: Re: [Qemu-devel] Re: [PATCHv2 0/8 RFC] boot order specification Date: Thu, 04 Nov 2010 10:24:45 +0100 Message-ID: References: <1288525209-3303-1-git-send-email-gleb@redhat.com> <20101031222553.GA16443@morn.localdomain> <20101101075351.GX26191@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: "Kevin O'Connor" , qemu-devel@nongnu.org, kvm@vger.kernel.org To: Gleb Natapov Return-path: Received: from mx1.redhat.com ([209.132.183.28]:29843 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755418Ab0KDJYu (ORCPT ); Thu, 4 Nov 2010 05:24:50 -0400 In-Reply-To: <20101101075351.GX26191@redhat.com> (Gleb Natapov's message of "Mon, 1 Nov 2010 09:53:51 +0200") Sender: kvm-owner@vger.kernel.org List-ID: Gleb Natapov writes: > On Sun, Oct 31, 2010 at 06:25:53PM -0400, Kevin O'Connor wrote: >> On Sun, Oct 31, 2010 at 01:40:01PM +0200, Gleb Natapov wrote: >> > This is current sate of the patch series for people to comment on. >> > I tried to use open firmware naming scheme to specify device path names. >> > >> > The patch series produce names like these: >> > for pci machine: >> > /pci@i0cf8/pci-isa-bridge@1/fdc@03f1/floppy@0 >> > /pci@i0cf8/pci-isa-bridge@1/fdc@03f1/floppy@1 >> > /pci@i0cf8/ata@1,1/ata-disk@1:0 >> > /pci@i0cf8/ata@1,1/ata-disk@1:1 >> > /pci@i0cf8/virtio-blk@3/virtio-disk@0 >> > /pci@i0cf8/ethernet@4/ethernet-phy@0 >> > /pci@i0cf8/ethernet@5/ethernet-phy@0 >> > >> > for isa machine: >> > adding '/isa/fdc@03f1/floppy@0' at index 2 >> > adding '/isa/fdc@03f1/floppy@1' at index 1 >> > adding '/isa/ata@0170/ata-disk@0:0' at index 0 >> > adding '/isa/ata@0170/ata-disk@0:1' at index 3 >> >> Hi Gleb, >> >> How will USB drives be identified? >> > USB bus has Open Firmware binding. I haven't look at the spec yet, but it > should be easy. > >> I'm not sure how SeaBIOS will be able to line up something like >> "/pci@i0cf8/ethernet@4/ethernet-phy@0" to an optionrom BEV. Also, if >> there is an optionrom with BCVs (eg, a scsi card), I'm not sure how >> that would that would be identified. > > The way to parse "/pci@i0cf8/ethernet@4/ethernet-phy@0" is this: each > element (between /.../) consist of node-name@unit-address. node-name > describes device/bus. unit-address is a device address on preceding node. > So pci@i0cf8 tells us that this is pci bus accessible through io > register 0x0cf8, ethernet@4 tells us that this is ethernet device in pci > slot 4 function 0, (ata@1,1 means ata device in slot 1 function 1). Aren't "ethernet" and "ata" redundant there? > ethernet-phy@0 means first phy on this ethernet device (usually there is > only one anyway). So if the pci card in slot 4 device 0 has optionrom > with BCV Seabios can associate bootindex with it easily given the > device path above.